The influence of the supply chain agents on the new product development's performance: an analysis based on the multi-group moderation

Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.

Imbibition damage in soybean seeds as affected by initial moisture content, cultivar and production location

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phylogeny of Triatoma sherlocki (Hemiptera: Reduviidae: Triatominae) Inferred from Two Mitochondrial Genes Suggests Its Location Within the Triatoma brasiliensis Complex

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulations under Ideal and Nonideal Conditions for Characterization of a Passive Doppler Geographical Location System Using Extension of Data Reception Network

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural FRF acquisition via electric impedance measurement applied to damage location

Continuing development of new materials makes systems lighter and stronger permitting more complex systems to provide more functionality and flexibility that demands a more effective evaluation of their structural health. Smart material technology has become an area of increasing interest in this field. The combination of smart materials and artificial neural networks can be used as an excellent tool for pattern recognition, turning their application adequate for monitoring and fault classification of equipment and structures. In order to identify the fault, the neural network must be trained using a set of solutions to its corresponding forward Variational problem. After the training process, the net can successfully solve the inverse variational problem in the context of monitoring and fault detection because of their pattern recognition and interpolation capabilities. The use of structural frequency response function is a fundamental portion of structural dynamic analysis, and it can be extracted from measured electric impedance through the electromechanical interaction of a piezoceramic and a structure. In this paper we use the FRF obtained by a mathematical model (FEM) in order to generate the training data for the neural networks, and the identification of damage can be done by measuring electric impedance, since suitable data normalization correlates FRF and electrical impedance.

Evaluation of the influence of location of osseointegrated implants associated with mandibular removable partial dentures

Purpose: The aim of this research was to assess, by means of, the bi-dimensional finite element method, the best implant location in the alveolar edge, through stress distribution and support structure displacement of a distal extension removable partial denture associated with an osseointegrated implant of 10.0 x .75 mm, acting as abutment for the denture base.Methods and Materials: Five models in sagittal cut were used to represent: model A-hemi arch containing natural tooth 33 and the distal alveolar edge; model B-similar to model A, but with a conventional removable partial denture to replace the absent teeth; model C (MC)-similar to the previous one, with an implant in the distal region of the edge under the denture base; model D-similar to MC, with the implant in the central region of the edge; model E-similar to MC, with an implant in the mesial region of the edge. With the aid of the finite element program ANSYS 8.0, the models were loaded with strictly vertical forces of 50 N on each cusp tip. Displacement and von Mises Maps were plotted for visualization of results.Results: The introduction of implant diminished the tendency of intrusion of the removable partial denture in all situations. The maximum stress was observed on implant in all situations. Approximating implant in direction of support teeth was benefit for stress distribution.Conclusion: Model D presented the lowest value for maximum tendency to displacement when compared with those found in the other models; model E demonstrated better relief with regard to demand from the abutment tooth; locating the implant near of the abutment tooth influenced positively the distribution of stresses on the analyzed structures.

Cryptic hammerhead shark lineage occurrence in the western South Atlantic revealed by DNA analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural description of humic substances from subtropical coastal environments using elemental analysis, FT-IR and C-13-solid state NMR data

Elemental composition and spectroscopic properties (FT-IR and CP/MAS C-13-NMR) of sedimentary humic substances (HS) from aquatic subtropical environments (a lake, an estuary and two marine sites) are investigated. Humic acids (HA) are relatively richer in nitrogen and in aliphatic chains than fulvic acids (FA) from the same sediments. Conversely, FA are richer in carboxylic groups and in ring polysaccharides than HA. Nitrogen is mostly present as amide groups and for lake and marine HS the FT-IR peaks around 1640 cm(-1) and 1540 cm(-1) identify polypeptides. Estuarine HS exhibit mixed continental-marine influences, these being highly influenced by site location. Overall, the data suggest that aquatic and mixed HS are more aliphatic than has been proposed in current models and also that amide linkages form an important part of their structural configuration.

Chromosomal location of heterochromatin and 45S rDNA sites in four South American triatomines (Heteroptera: Reduviidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis of heteropyknotic chromatin and silver-stained material in Platycarenus umbractulatus (Pentatomidae: Discocephalinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of axial loads on implanted-supported partial fixed prostheses by strain gauge analysis

Objectives: The present study used strain gauge analysis to perform an in vitro evaluation of the effect of axial loading on 3 elements of implant-supported partial fixed prostheses, varying the type of prosthetic cylinder and the loading points. Material and methods: Three internal hexagon implants were linearly embedded in a polyurethane block. Microunit abutments were connected to the implants applying a torque of 20 Ncm, and prefabricated Co-Cr cylinders and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n=5). Four strain gauges (SG) were bonded onto the surface of the block tangentially to the implants, SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments with a 10 Ncm torque and an axial load of 30 kg was applied at five predetermined points (A, B, C, D, E). The data obtained from the strain gauge analyses were analyzed statistically by RM ANOVA and Tukey's test, with a level of significance of p<0.05. Results: There was a significant difference for the loading point (p=0.0001), with point B generating the smallest microdeformation (239.49 mu epsilon) and point D the highest (442.77 mu epsilon). No significant difference was found for the cylinder type (p=0.748). Conclusions: It was concluded that the type of cylinder did not affect in the magnitude of microdeformation, but the axial loading location influenced this magnitude.

Rescaled range analysis of pluviometric records in SA o pound Paulo State, Brazil

This paper presents an analysis of pluviometric precipitation time series obtained from 45 data collection points, with daily rain measurements (in mm), from 45 counties within the nine climatic regions of the state of SA o pound Paulo, mostly for the period of 1950-1997. SA o pound Paulo State (Brazil) is situated between the inter-tropical climatic zone, dominated by tropical and equatorial masses, and the sub-tropical climatic zone controlled by tropical and polar air masses. Due to this location the State can be divided into three climatic zones: south-east and south-west, which are permanently humid, and north with a well defined dry period. Rescaled range analysis, or R/S analysis, has been used to investigate the scale properties of the time series. We found two clear values for the Hurst exponent, one for a period of 10 to 200 days (H(1)), and another for a period above 210 days (H(2)). The value of H(1) lies between 0.6 to 0.7 for all climatic zones indicating characteristics of persistence. However, H(2) is (i) close to 0.5 for the littoral area, showing random characteristics, (ii) close to 0.6 for mountain areas, indicating persistence characteristics, and (iii) close to 0.4 for the plane area, irrespective of whether the climate is dry or humid, and shows anti-persistence characteristics.

Ultrasonographic analysis of senile cataractous lens of dogs and its correlation to phacoemulsification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Errors due to the tropospheric and ionospheric effects on the geographic location of data collection platforms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative cytogenetic and allozyme analysis of Mugil rubrioculus and M. curema (Teleostei : Mugilidae) from Venezuela

A comparative cytogenetic and allozyme analysis of sympatric specimens of Mugil rubrioculus and M. curema from Venezuela is reported. Specimens of M. rubrioculus exhibit a 2n=48 karyotype with exclusively acrocentric (NF=48) chromosomes, one pair of NORs interstitially located on chromosome pair number 8 and constitutive heterochromatin distributed in pericentromeric position of all chromosomes. Specimens of M. curema show cytogenetic features significantly different in comparison to M. rubrioculus in terms of chromosome number and morphology (2n=24 biarmed chromosomes, NF=48) and NORs location (telomeric region of the largest metacentric pair). Starch gel electrophoresis analysis at 20 presumptive loci reveals a reduced genetic difterentiation between the two species. In fact, though a total of ten private alleles are identified; all loci share alleles between the two species and the obtained Nei's genetic distance (D= 0.060) is lower than the values obtained between other congeneric mullet species. Thus, the cytogenetic and allozyme data sets indicate quite different degrees of genetic divergence between M. rubrioculus and M. curema. This could either reflect an underestimate of molecular divergence owing to cryptic variation or different rates of molecular/chromosomal evolution. Whatever the explanation, this study confirms the power of karyological data in discriminating species of Mugilidae.