Finite element analysis on stresses field of normalized layer thickness within ceramic coating on aluminized steel

Multilayer ceramic coatings were fabricated on steel substrate using a combined technique of hot dipping aluminum(HDA) and plasma electrolytic oxidation(PEO). A triangle of normalized layer thickness was created for describing thickness ratios of HDA/PEO coatings. Then, the effect of thickness ratio on stresses field of HDA/PEO coatings subjected to uniform normal contact load was investigated by finite element method. Results show that the surface tensile stress is mainly affected by the thickness ratio of Al layer when the total thickness of coating is unchanged. With the increase of A] layer thickness, the surface tensile stress rises quickly. When Al2O3 layer thickness increases, surface tensile stress is diminished. 'Meanwhile, the maximum shear stress moves rapidly towards internal part of HDA/PEO coatings. Shear stress at the Al2O3/Al interface is minimal when Al2O3 layer and Al layer have the same thickness.

Assessment Method for Leaf Litters Allelopathic Effect on Cyanobacteria

A new bioassay technique combining leaf disk and softagar over-layer methods was developed to investigate the allelopathic effect of deciduous leaf litters on the growth of cyanobacteria ( Microcystis aeruginosa Kütz.). Bioactive substances exuded from leaf disks caused inhibitory plaques on the agar plate containing cyanobacteria , and the rate of diffusion depended on the specific leaf disk area. Most of the leaf litters collected around reservoirs in Japan showed inhibitory activity to M. aeruginosa , with Rhus trichocarpa Miq., Quercus variabilis Blume and Mallotus japonicus (Thunb.) Muell. Arg. being the strongest among the 22 tested species.(PDF has 4 pages.)

Combining Plant Pathogenic Fungi and the Leaf-Mining Fly, Hydrellia pakistanae, Increases Damage to Hydrilla

Four fungal species, F71PJ Acremonium sp., F531 Cylindrocarpon sp., F542, Botrytis sp., and F964 Fusarium culmorum [Wm. G. Sm.] Sacc. were recovered from hydrilla [ Hydrilla verticillata (L. f.) Royle] shoots or from soil and water surrounding hydrilla growing in ponds and lakes in Florida and shown to be capable of killing hydrilla in a bioassay. The isolates were tested singly and in combination with the leaf-mining fly, Hydrellia pakistanae (Diptera: Ephydridae), for their capability to kill or severely damage hydrilla in a bioassay.

Effects of Triclopyr on Variable-Leaf Watermilfoil

The objective of the study described here was to determine the effect on variable-leaf watermilfoil of various combinations of triclopyr concentrations and exposure times using dosage rates that controlled Eurasian watermilfoil under laboratory and field conditions (Netherland and Getsinger 1992, Getsinger et al. 1997, Petty et al. 1998).

The Effect of the Thickness of Fe2 Al5 Phase Layer at Fe/Al Interface on the Mechanics Behavior of Hot Dip Aluminizing Coating

Hot Dip Aluminized Coatings with different thickness were prepared on Q235 steel in aluminum solutions with different temperature for certain time. Through tensile tests and in-situ SEM observations, the effect of the coating's microstructure on the tensile strength of the samples was studied. It was disclosed at certain aluminum solution temperature,transaction layers mainly composed of Fe2 Al5 phase got thicker with time prolonging, and this changed initial crack's extending direction from parallel with to vertical with stretching direction. The change in crack direction decreased tensile strength of samples, thus made the coating easy to break. It was concluded that the existence of thick Fe2 Al5 phase layer was the basic reason for the lowering of tensile strength of the coating.

Prediction Of Shear-Band Thickness In Metallic Glasses

We derive an explicit expression for predicting the thicknesses of shear bands in metallic glasses. The model demonstrates that the shear-band thickness is mainly dominated by the activation size of the shear transformation zone (STZ) and its activation free volume concentration. The predicted thicknesses agree well with the results of measurements and simulations. The underlying physics is attributed to the local topological instability of the activated STZ. The result is of significance in understanding the origin of inhomogeneous flow in metallic glasses. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Electrowetting On A Lotus Leaf

Electrowetting on dielectrics has been widely used to manipulate and control microliter or nanoliter liquids in micro-total-analysis systems and laboratory on a chip. We carried out experiments on electrowetting on a lotus leaf, which is quite different from the equipotential plate used in conventional electrowetting. This has not been reported in the past. The lotus leaf is superhydrophobic and a weak conductor, so the droplet can be easily actuated on it through electrical potential gradient. The capillary motion of the droplet was recorded by a high-speed camera. The droplet moved toward the counterelectrode to fulfill the actuation. The actuation speed could be of the order of 10 mm/s. The actuation time is of the order of 10 ms.

Elastic deformation of soft membrane with finite thickness induced by a sessile liquid droplet

In this paper, the role of vertical component of Surface tension of a droplet on the elastic deformation of a finite-thickness flexible membrane was theoretically analyzed using Hankel transformation. The vertical displacement at the Surface was derived and can be reduced to Lester's or Rusanov's solutions when the thickness is infinite. Moreover, some Simulations of the effect of a liquid droplet on a membrane with a finite thickness were made. The numerical results showed that there exists a saturated membrane thickness of the order of millimeter, when the thickness of a membrane is larger than such a value, the membrane can be regarded as a half-infinite body. Further numerical calculations for soft membrane whose thickness is far below the saturated thickness were made. By comparison between the maximum vertical displacement of an ultrathin soft membrane and a half-infinite body, we found that Lester's or Rusanov's solutions for a half-infinite body cannot correctly describe Such cases. In other words, the thickness of a soft membrane has great effect on the surface deformation of the ultrathin membrane induced by a liquid droplet. (C) 2009 Elsevier Inc. All rights reserved.

Electrowetting on a lotus leaf

Electrowetting on dielectrics has been widely used to manipulate and control microliter or nanoliter liquids in micro-total-analysis systems and laboratory on a chip. We carried out experiments on electrowetting on a lotus leaf which is quite different from the equipotential plate used in conventional electrowetting. This has not been reported in the past. The lotus leaf is superhydrophobic and a weak conductor so the droplet can be easily actuated on it through electrical potential gradient. The capillary motion of the droplet was recorded by a high-speed camera. The droplet moved toward the counterelectrode to fulfill the actuation. The actuation speed could be of the order of 10 mm/s. The actuation time is of the order of 10 ms.

The growth and survival rate of Oreochromis niloticus fries fed (private) with varying percentages of Leucaena leucocephala leaf meal based diets

A-ten-week feeding trial was carried out to evaluate the growth and survival rate of Oreochromis niloticus fed with varying percentage levels of Leucaena leucocephala leaf meal based diets. The substitution rates of L.leucocephala leaf meal for groundnut cake in the various diets were 0% - Diet 1, 25% - Diet 2, 50% - Diet 3 and 75% - Diet 4. Ten fries with an average weight of 0.44g were stocked at the rate of 10 fish per bowl and fed at 5% body weight. Diet 1 with 0% inclusion of Leucaena leaf meal gave a significant difference (P>0.05) in growth and survival rate compared with diets 2, 3 and 4. The water quality parameters recorded were appropriate for fish culture

rhegf-Loaded Plga-Alginate Microspheres Enhance The Healing Of Full-Thickness Excisional Wounds In Diabetised Wistar Rats

[EN] Diabetic foot ulcers (DFUs) represent a major clinical challenge in the ageing population. To address this problem, rhEGF-loaded Poly-Lactic-co-Glycolic-Acid (PLGA)-Alginate microspheres (MS) were prepared by a modified w/o/w-doubleemulsion/ solvent evaporation method. Different formulations were evaluated with the aim of optimising MSs properties by adding NaCl to the surfactant solution and/or the solvent removal phase and adding alginate as a second polymer. The characterization of the developed MS showed that alginate incorporation increased the encapsulation efficiency (EE) and NaCl besides increasing the EE also became the particle surface smooth and regular. Once the MS were optimised, the target loading of rhEGF was increased to 1% (PLGA-Alginate MS), and particles were sterilised by gamma radiation to provide the correct dosage for in vivo studies. In vitro cell culture assays demonstrated that neither the microencapsulation nor the sterilisation process affected rhEGF bioactivity or rhEGF wound contraction. Finally, the MS were evaluated in vivo for treatment of the full-thickness wound model in diabetised Wistar rats. rhEGF MS treated animals showed a statistically significant decrease of the wound area by days 7 and 11, a complete re-epithelisation by day 11 and an earlier resolution of the inflammatory process. Overall, these findings demonstrate the promising potential of rhEGF-loaded MS (PLGA-Alginate MS) to promote faster and more effective wound healing, and suggest its possible application in DFU treatment.