Adubação nitrogenada em genótipos de soja associada à inoculação em semeadura direta no cerrado

Pós-graduação em Agronomia - FEIS

Adubação nitrogenada na cultura do milho com ureia revestida por diferentes fontes de polímeros

In view of theoretic increase in efficiency of nitrogen fertilizers for controlled release, this study aimed to evaluate the effect of nitrogen, using conventional urea and ureas coated by different polymers, in the leaf N content, leaf chlorophyll index, components production and grain yield of irrigated corn in growing season and second crop in the savannah region. The experiments were conducted at experimental area belonging to UNESP - Ilha Solteira, located in Selviria - MS in a dystrophic Red Latosol (Haplustox), clayey texture. The statistical design was randomized blocks, with four repetitions, in a 4 x 4 factorial arrangement, being four nitrogen doses (0, 40, 80 and 120 kg ha(-1)) applied at sidedressing and four urea sources (a conventional urea and three coated with polymers in different compositions and concentrations). The coated ureas are not efficient under the soil and climate conditions studied of the savanna, because they provided results similar to the conventional urea for the production components and grain yield of corn in the first and second crop. The increment of nitrogen doses increase linearly the leaf N content and grain yield of corn in the first and second crop.

Adubação nitrogenada no feijoeiro após palhada de milho e braquiária no plantio direto

The present study was carried out to evaluate the agronomic and technological performance of common-bean crop following three straw mulch production system (sole corn, corn-Urochloa ruziziensis inter-crop and sole U. ruziziensis) and topdressing nitrogen fertilization (0, 40, 80, 120 and 160 kg ha(-1) of N) in the fourth year after the no-tillage system implementation. A randomized block design, in a splitplot array, with three replications was used. The use of U. ruziziensis intercropped with maize allowed a greater straw mulch formation and a more adequate coverage of the soil surface aiming the beans cultivation in succession. The nitrogen fertilization influenced the common-bean productivity in succession to U. ruziziensis unique and maize intercropped with U. ruziziensis. The common-bean crop in succession to the straw mulch production system with U. ruziziensis allowed higher grain production and sieve yield. The grain cooking time decreased due to the rates of N used in the dry bean crop in succession of maize exclusive.

Avaliação de fração volumétrica de austenita retida e martensita em aço trip 800 utilizando três métodos diferentes

In the second half of the last century the automobile industries suffered from the petroleum crisis caused mainly by the wars in the Middle East. These crises led the automakers rethink their vehicles. One of the most important events after that was the adoption of new steels by the industry. One example is the TRIP steels (Transformationinduced plasticity). It is known that the macroscopic behavior of a material is strongly dependent on its microstructure and therefore the quantitative metallography is important to understand and relate the material properties to its microstructure. In this work, different specimens of TRIP steels were etched using LePera reagent. The obtained images were analyzed using digital processing. Using the ImageJ software the methods threshold and watershed were studied as well as a comparison with the ASTM E562 standard. The methods were compared and finally the morphological characteristics and volumetric fraction of the retained austenite and martensite phases were analyzed. The results showed that the threshold led to a higher number of identified grains with lower mean area and total area fraction than the watershed method and ASTM standard

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Manejo da adubação nitrogenada na cultura do milho pelo uso da inoculação com azospirillum brasilense em consórcio com capim xaraés

Pós-graduação em Agronomia - FEIS

Critérios para o manejo da adubação nitrogenada na cultura do feijão utilizando clorofilômetro portátil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adubação nitrogenada para consórcio de alface e rúcula

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Inoculação de sementes com Azospirillum brasilense e Rhizobium tropici e adubação nitrogenada em cobertura em feijoeiro de inverno irrigado em sistema plantio direto

Pós-graduação em Agronomia - FEIS

Parcelamento da adubação nitrogenada no feijão em sucessão a sistemas de cultivo com milho e Urochloa ruziziensis em plantio direto

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Bactérias promotoras de crescimento e adubação nitrogenada no crescimento inicial de cana-de-açúcar proveniente de mudas pré-brotadas

The objective of this work was to evaluate the effects of the inoculation with plant growth-promoting bacteria on the formation of sugarcane pre-sprouted seedlings, originated from individual buds, and to quantify the initial growth of these seedlings in association with nitrogen application, in a low fertility soil. Two experiments were carried out: one in greenhouse conditions, with a time span of 50 days, and the other in vases under field conditions, with a time span of 180 days. In both experiments, a randomized complete block design was used with a factorial arrangement of 2x3, in the first experiment - with or without inoculation, and with three quantities of bud reserve -, and of 2x2x4, in the second one - with or without inoculation, with or without nitrogen, evaluated in four times: at 45, 90, 135, and 180 days. The inoculant had effect on the initial growth of the pre-sprouted seedlings, increasing sprouting speed and dry matter accumulation on roots and shoots, regardless of the bud reserve amount. In the second experiment, the inoculant increased the initial growth of shoots and root system up to 180 days after transplantation, increasing height, tillering, stalk diameter, dry matter production of stalks and straw, and root length, regardless of nitrogen application. The inoculant has a positive physiological effect on plant growth.

Adubação nitrogenada e potássica em goiabeiras ‘paluma’: II. efeito no estado nutricional das plantas

The proper mineral fertilization of guava orchards under intensive management, is a major factor in productivity and monitoring the nutritional status of the plants contributes to the efficiency of this agronomic practice. The aim of this study was to investigate different doses of nitrogen and potassium in the nutritional status of guava 'Paluma'. The experiment was conducted at Vista Alegre do Alto, Sao Paulo, in a 7 year old irrigated orchard, managed with fruiting pruning during four consecutive growing seasons. The soil is a dystrophic Ultisol. The experimental design was randomized blocks, in factorial, with four nitrogen doses (0, 0.5, 1 and 2 kg of N plant(-1)) and four of potassium (0, 0.55, 1.1 and 2.2 kg of K2O plant(-1)), with three replications. Nitrogen fertilization promoted increased levels of leaf N and Mn and the decrease in the levels of P and B; effects observed from the second to the fourth production cycle. Nitrogen fertilization increased the Ca and Mg levels, respectively, in the second and third cycle. Except for the first production cycle, K and Mn foliar concentrations increased with increasing potassium fertilization, whereas the levels of Mg, in the second and the fourth cycle, decreased as a function of fertilization.

Adubação nitrogenada e potássica em goiabeiras ‘paluma’: I. efeito na produtividade e na qualidade dos frutos para industrialização

The nutrition of the orchards is the major factor of productivity, being necessary to know the proper doses of fertilizers and their influence on fruit quality attributes for industrialization. This study evaluated the effects of different doses of nitrogen and potassium on the productivity of guava trees and also on the values of pH, soluble solids (SS), titratable acidity (TA) and pulp/kernel ratio of guavas. The experiment was conducted at Vista Alegre do Alto, SP in an irrigated 'Paluma'guava orchard, 7 years old, managed with pruning during three consecutive cycles of production. The soil of the area was dystrophic Ultisol. The experimental design was the randomized blocks, in factorial, with four nitrogen doses (0, 0.5, 1 and 2 kg of N plant(-1)) and four of potassium (0, 0.55, 1.1 and 2.2 kg of K2O plant(-1)), with three replications. Nitrogen fertilization increased productivity and the pH of the fruit, being explained by the quadratic polynomial regression models; reduced linearly the pulp/kernel ratio and do not influenced the SS and TA values. On the other hand, potassium fertilization and N x K interaction had no significant effects on productivity and the other characteristics evaluated.

Formas orgânicas e inorgânicas de fósforo no solo em função de plantas de cobertura e de adubação nitrogenada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelos de fração de cura de mistura e não-mistura na distribuição Weibull Modificada Generalizada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)