Dinâmica da troca de calor através do bico do tucano-toco, Ramphastos toco (Piciformes, Ramphastidae)

A regulação da temperatura corpórea, diante de variações da temperatura ambiente e/ou da taxa de produção de calor metabólico, envolve mecanismos reguladores da taxa de troca de calor entre o animal e o ambiente. Um destes mecanismos consiste na modulação da temperatura superficial de áreas especificas do corpo do animal, via ajustes vasomotores, que podem atuar tanto no sentido de promover a dissipação de calor (em uma situação de aumento da temperatura) quanto na retenção deste (em uma situação de queda de temperatura). Neste contexto, alguns animais exibem partes do corpo, como orelhas, membros, cauda, etc. que funcionam de maneira otimizada para realizar esta troca de calor. Nestes casos, estas partes são referidas como “janelas térmicas” e possuem em comum três características básicas: 1 - alta área superficial; 2 - baixo isolamento térmico; 3 – boa vascularização e controle do fluxo sanguineo na dependência da temperatura. Recentemente, o uso do bico como uma janela térmica foi descrito para o tucano-toco, Ramphastos toco (Aves, Ramphastidae), revelando ser esta uma estrutura com a maior capacidade de troca térmica já identificada. Naquele estudo, porém, a temperatura superficial das aves (bico) foi monitorada enquanto elas eram submetidas a mudanças bastante lentas (ao longo de várias horas) da temperatura ambiente, de forma que a dinâmica temporal da resposta exibida pelas aves permanecia ainda bastante desconhecida. Além disso, sabe-se que os membros das aves também atuam como importantes vias para troca de calor com o ambiente, e no caso do tucano toco, a regulação da temperatura superficial desses apêndices frente a variações da temperatura não tinha sido estudada. Portanto, o objetivo do presente estudo foi investigar a velocidade com que os ajustes vasomotores subjacentes à modulação... (Resumo completo, clicar acesso eletrônico abaixo)

Dimensionamento de trocadores de calor aplicados à refrigeração da água do molde de um processo de lingotamento contínuo

This study aims to determine the most suitable type of heat exchanger to be applied to the water cooling the mold of a continuous casting process. Basically been studied four types of heat exchangers: shell and tube operating in counterflow, shell and tube operating in parallel flow, plate type and operating counterflow and plates operating in parallel flow. Initially is displayed design of heat exchangers for the conditions of the proposed application. With the heat exchangers dimensioned comparisons were made in order to set the heat exchanger more suitable for application. In the study, one comes to the conclusion that the plate type heat exchangers operating shows counterflow major advantage for this application

Calor e temperatura: uma revisão dos conceitos nas diferentes abordagens físicas

This work research and analyses the formulations and concepts of heat and temperature presented in Physics textbooks. These issues are deemed important because students often have difficulties differentiating and understanding such concepts, which compromises their education. The goal is to show that well-established relationships between Physical quantities such as energy, pressure, heat and temperature, even in different theories of Classical and Quantum Physics are not enough to define either temperature or heat. It also presents simple experiments that complement the teaching and learning of these concepts

Análise preliminar para a estimativa da perda de calor sensível de um fluido homogêneo térmico em um reservatório de geometria cilindrica

This work analyzed the loss of sensible heat from one fluid to be considered homogeneous heat distribution on a thermal reservoir with cylindrical geometries composite insulating layers. We studied two thermal reservoirs with a volume of 20 liters, and the first has a layer thickness of 75 mm of expanding polyurethane foam wrapped in the polycarbonate container and the second container has only layer thickness of 5 mm of polycarbonate, as insulation of fluid of the external environment. The experimental results are compared with theoretical results obtained through a calculation script, displayed and detailed during the work development, from the theory of energy balance. The maximum error introduced between the theoretical and experimental results were 3.5% and 1.4% respectively for the Boilers with or without a polyurethane coating

Comparação da eficiência térmica de trocadores de calor no laboratório de sistemas térmicos da Faculdade de Engenharia

This work aims to verify and compare the efficiency of heat exchangers used in the thermal systems laboratory at Faculdade de Engenharia do Campus de Guaratinguetá - UNESP. Basically, it has been studied two types of heat exchangers: plate type, operating in parallel flow and counter-flow, shell and tube type and also operating in parallel flow and counter flow. Initially it has been presented the didactic equipment and procedures for use of these heat exchangers in the proposed experiments. With the results obtained from the experiments, comparisons were made in order to define the behavior of the heat exchangers regarding some variables. In the study, one comes to the conclusion that the results from shell and tube type of heat exchanger, used in the thermal systems lab, are superior in all conditions analyzed

Análise da troca de calor em sistemas de injeção de termoplásticos – um estudo de caso: polipropileno

The purpose of this work was to define the processes through which the cooling of thermoplastics parts occur inside the mold cavity in an injection process. The plastic materials have become more widespread in the automobile industry and, among its manufacturing processes, injection moulding develops quickly, allowing the manufacturing of quality parts in great volumes. Data was collected from the injection of Volkswagen Gol NF 23X (Gol Generation 5). Using approximated methods for calculation for the heat Exchange inside the mould, in the cooling system, the required water flow was determined to properly cool the parts. Comparing the obtained value with Project specifications, it was verified that the method, in spite of incurring in some mistakes, is efficient in determining the flow of cooling fluid and serves as a verification tool for the parameters defined on project, and can be applied to simple projects. The definition of the cooling system, in practice, is dependent on innumerable variables and each case must be approached in itself, since the parameters for one product may not be ideal for another

Mosaicos: escrita-fluxos

Não disponível

Quantificação de CO2 e vapor de água nas interfaces bairro-cultura de eucalipto da reserva Floresta Estadual Navarro de Andrade no município de Rio Claro - SP

Environrnental issues are in focus lately, mainly due to climate change that have been registered in recent decades. Some of these changes are attributed to the increased atmospheric concentration of greenhouse gases induce, main1y due to anthropogenic emissions. These gases act by absorbing heat in the form of electromagnetic radiation emitted by the planet, and after a time interval, reissuing such radiation in various directions, including back to the surface, causing overheating of the same. Projections indicate that climate change wiIl tend to increase even more. Because of this, in recent years a number of studies are being conducted on the dynamics of inducers of greenhouse gases, especially C02, because that is primarily responsible for the development of that phenomenon. To better understand the flow of C02 are studied specific areas, as regions bordering the forests, soils that are under preparation for agriculture, urban areas, among others. Forests are an important sink for C02, because during the process of photosynthesis, this molecule is captured and used to obtain glucose. Thus, studies of the regions bordering the forests contribute enough to the understanding of the dynamics of C02. Because it requires a large amount of factors, the concentration of CO2 in a given location is very variable and this makes it much more difficult to understand their dynamics and, consequently, the action of the enhanced greenhouse effect. Being a relatively new area of study, there are many controversies about the consequences of the greenhouse effect, so that the community does not believe that climate change resulting from human action. According to them, such changes are merely natural phenomena and periodicals

Bendito: a narrativa em fluxos transmídia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem do equilíbrio térmico de frangos de corte: um estudo da geração e transferência de calor

Pós-graduação em Zootecnia - FCAV

Estratégias Produtivas e Tecnológicas das empresas da Indústria Farmacêutica do Brasil e da Índia: um exame a partir de indicadores aplicados aos fluxos de comércio exterior

This work aims to evaluate the different trajectories in terms of production structure, technological capabilities and performance in international trade of pharmaceutical industries in Brazil and India. For this, we build international trade indicators, based on data provided by the COMTRADE, the UN database for trade. Through the indicators, it is observed that the countries have different results in the catch-up process of the pharmaceutical industry. India has built a productive structure strongly based on generic drugs, with which it is able to greatly meet domestic demand and export to many countries worldwide. Brazil remains in a position of dependence of foreign production, with a high level of imports and exports to the region of Latin America

Monitoramento de cultivos submersos de linhagens de Streptomyces clavuligerus para a quantificação de distribuição de fluxos metabólicos

Pós-graduação em Biotecnologia - IQ

Síntese de nanopartículas de sulfeto de cobre, preparação e estabilidade coloidal de fluidos trocadores de calor em meio aquoso

Pós-graduação em Química - IQ

Formação acadêmica inicial em educação física: perfis profissionais, objetivos e fluxos curriculares de uma instituição privada de ensino superior do interior do Estado de São Paulo

The present study represents a qualitative thesis, characterized as a case study, which uses the method of the present approach. In addressing the academic home in physical education, there is the constancy of the discussions regarding the curriculum and professional formatting. In view of the curriculum modifications to fit the new legislation, and the fact they are few studies related to private institutions that offer such courses, which offer even greater number of courses when compared to public institutions aimed to investigate and analyze the professional profiles, curricular goals and flows contained in the pedagogical projects of courses bachelor degree in physical education and a private institution of higher education of the State of São Paulo, as well as verifying the existence and adequacy of articulation to the institutional educational project and the institutional development plan. Compounding the literature review discussed the key historical facts relating to courses in physical education in our country, and its path to the current model. Also presented was the law of physical education courses in force in Brazil and some concepts about teaching course projects and their relationship to other institutional documents. Techniques were used to review and document analysis, with primary source documents of their own and other government institution. It found a lack of interest of some private institutions of higher education in official documents available for this type of research, which is bad since there are more courses offered by them compared to public institutions. As for the degree course for training teachers of physical education, found lack of specificity regarding the differentiation between content and the bachelor, which ends up deviating from the expectations contained in the course to the one presented in the curriculum. Thus, it becomes a need for greater collaboration of private institutions of higher education...

Identificação de ilhas de calor na área urbana de Ilha Solteira - SP através da utilização de geotecnologias

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)