Studies on the filtration, feeding and excretion rates in Perna viridis, Marcia cor and Crassostrea gryphoides (Mollusca: Bivalvia) using P³² labelled Ankistrodesmes

The study deals with a series of experiments to investigate feeding and excretion in three species of bivalves: Perna viridis (Linné), Marcia cor (Sowerby) and Cassostrea gryphoides (Gould) from Manora Channel, Karachi. Bivalves were fed with suspensions of Ankistrodesmes labelled with P³². These animals showed a considerable variation in the average filtration rates depending upon species and the body lenght. Exceptionally high content of the P³² introduced with Akistrodesmes, got excreted as pseudofaeces and faeces within first three days following its absorption as a meal. The assimilated P³² is partly released as faecal material and its major proportion is directly transferred to the solution. As expexted the gonad and kidney are the main organs found responsible for excretion as comared to other body parts. Although, the assimilated P³² is mostly concentrated in the digestive glands, the results also show a significant presence of P³² in the gonads. Accumulation of P³² was the least in the foot.

Influence of formulated diets with varying protein levels on growth and ammonia excretion in the fry of Indian major carp, Cirrhina mrigala

The influence of formulated isocaloric diets of different protein levels (30, 35, 40, 45 and 50%) on the growth and ammonia excretion of the Indian major carp Cirrhina mrigala fry was studied for a rearing period of four weeks in the laboratory. Fishmeal, groundnut oilcake and silkworm pupae formed the source of protein in all the diets. As the dietary protein level increased from 30 to 40%, the growth and conversion efficiency increased significantly. Further increase in the protein level resulted in decrease in growth and conversion efficiency. Growth rate, weight gain (%), and gross and net feed conversion efficiencies were maximum at 40% dietary protein level. Ammonia excretion was directly proportional to the level of protein in the diet.

Effects of socking [sic] density on ammonia excretion and the growth of Nile tilapia (Oreochromis niloticus L.)

The effects of stocking density (10, 15, 50 & 75 fish in 65L tank) and ammonia excretion on the growth of Nile tilapia, Oreochromis niloticus (12.19 ± 1.21 g) were investigated. Increasing stocking density of Nile tilapia from 15 fish/tank (2.81 g fish/L) to 75 fish/tank (14.07 g fish/L) resulted in associated increase in ammonia level (1.48 ± 0.87 mg/L to 26.44 ± 11.4 mg/L) and significantly lower growth rates. Significantly better feed conversion ratios were found for fish reared at lower (15 fish/tank) stocking densities compared to higher (75 fish/tank) stocking densities. Individual growth rates were significantly better for fish reared at a lower stocking density 15 fish/tank compared to higher stocking density 75 fish/tank and size variation (coefficient of variation in weight) were positively correlated with stocking density. Although water exchange did not have a significant effect on the growth of Nile tilapia for fish stocked at 10 fish/tank (1.88 g fish/L) and 50 fish/tank (9.38 g fish/L), however, the fish in the higher stocking density (9.38 g fish/L) groups and without water exchange, significantly changed the coloration of their bodies (silver to black) which may be due to the lower oxygen levels combined with higher ammonia levels. Ammonia level increased with increasing stocking density and without water exchange. In this study, it may be suggested that when fish reared at higher stocking densities then water exchange must be taken in to consideration so as to help avoid environmental and physiological stress to the fish.

Influences of dietary lipid and phosphorus levels on retention and excretion of phosphorus and nitrogen in fingerlings red sea bream, Pagrus major

A laboratory based 2x3 factorial experiment was conducted for 12 weeks to investigate the influences of dietary lipid and phosphorus (P) levels on retention and excretion of phosphorus and nitrogen (N) in fingerling red sea bream. Two levels of lipid (210 and 260 g/kg) and three levels of phosphorus (17, 14 and 12 g/kgˉ¹) in the dry diets were tested. Duplicate groups of 25 red sea bream (average weight 3.74±0.07 g) per 60L glass tank were fed experimental diets three times a day near to satiation level at 22 to 28°C water temperature. A reduction in dietary fish meal from 500 to 300 g/kg dry diet, corresponding to a supplementation in both dietary lipid and P resulted in significant increase in both P and N retention which resulted in the reduction of their excretion by red sea bream. The overall results of the present study demonstrated that both lipid and phosphorus supplementation are necessary for developing less-polluting feed which in turn, reduce fish meal level in the diet of fingerling red sea bream. Further studies in this regard with different size and age groups of red sea bream are warranted.

Changes of urinary steroid conjugates and gonadotropin excretion in the menstrual cycle and pregnancy in the Yunnan snub-nosed monkey (Rhinopithecus bieti)

The Yunnan snub-nosed monkey (Rhinopithecus bieti) is one of the most endangered species in the world, and it is endemic to China. According to our knowledge, there was no information on reproduction for this species. The present study was designed to und

Application of the fractional Fourier transform to the design of LCOS based optical interconnects and fiber switches

It is shown that reflective liquid crystal on silicon (LCOS) spatial light modulator (SLM) based interconnects or fiber switches that use defocus to reduce crosstalk can be evaluated and optimized using a fractional Fourier transform if certain optical symmetry conditions are met. Theoretically the maximum allowable linear hologram phase error compared to a Fourier switch is increased by a factor of six before the target crosstalk for telecom applications of -40 dB is exceeded. A Gerchberg-Saxton algorithm incorporating a fractional Fourier transform modified for use with a reflective LCOS SLM is used to optimize multi-casting holograms in a prototype telecom switch. Experiments are in close agreement to predicted performance. © 2012 Optical Society of America.

Increasing the open-circuit voltage of photoprotein-based photoelectrochemical cells by manipulation of the vacuum potential of the electrolytes.

The innately highly efficient light-powered separation of charge that underpins natural photosynthesis can be exploited for applications in photoelectrochemistry by coupling nanoscale protein photoreaction centers to man-made electrodes. Planar photoelectrochemical cells employing purple bacterial reaction centers have been constructed that produce a direct current under continuous illumination and an alternating current in response to discontinuous illumination. The present work explored the basis of the open-circuit voltage (V(OC)) produced by such cells with reaction center/antenna (RC-LH1) proteins as the photovoltaic component. It was established that an up to ~30-fold increase in V(OC) could be achieved by simple manipulation of the electrolyte connecting the protein to the counter electrode, with an approximately linear relationship being observed between the vacuum potential of the electrolyte and the resulting V(OC). We conclude that the V(OC) of such a cell is dependent on the potential difference between the electrolyte and the photo-oxidized bacteriochlorophylls in the reaction center. The steady-state short-circuit current (J(SC)) obtained under continuous illumination also varied with different electrolytes by a factor of ~6-fold. The findings demonstrate a simple way to boost the voltage output of such protein-based cells into the hundreds of millivolts range typical of dye-sensitized and polymer-blend solar cells, while maintaining or improving the J(SC). Possible strategies for further increasing the V(OC) of such protein-based photoelectrochemical cells through protein engineering are discussed.

Experimental demonstration of a transparent graphene millimetre wave absorber with 28% fractional bandwidth at 140 GHz.

The development of transparent radio-frequency electronics has been limited, until recently, by the lack of suitable materials. Naturally thin and transparent graphene may lead to disruptive innovations in such applications. Here, we realize optically transparent broadband absorbers operating in the millimetre wave regime achieved by stacking graphene bearing quartz substrates on a ground plate. Broadband absorption is a result of mutually coupled Fabry-Perot resonators represented by each graphene-quartz substrate. An analytical model has been developed to predict the absorption performance and the angular dependence of the absorber. Using a repeated transfer-and-etch process, multilayer graphene was processed to control its surface resistivity. Millimetre wave reflectometer measurements of the stacked graphene-quartz absorbers demonstrated excellent broadband absorption of 90% with a 28% fractional bandwidth from 125-165 GHz. Our data suggests that the absorbers' operation can also be extended to microwave and low-terahertz bands with negligible loss in performance.

Polymerization of ionic liquid-based microemulsions: A versatile method for the synthesis of polymer electrolytes

电子邮箱fyan@suda.edu.cn

A Novel 0.72-6.2GHz Continuously-Tunable Delta Sigma Fractional-N Frequency Synthesizer

This paper presents a wideband Delta Sigma-based fractional-N synthesizer with three integrated quadrature VCOs for multiple-input multiple-output (MIMO) wireless communication applications. It continuously covers a wide range frequency from 0.72GHz to 6.2GHz that is suitable for multiple communication standards. The synthesizer is designed in 0.13-um RE CMOS process. The dual clock full differential multi-modulus divide (MMD) with low power consumption can operate over 9GHz under the worst condition. In the whole range frequency from 0.72GHz to 6.2GHz, the maximal tuning range of the QVCOs reaches 33.09% and their phase noise is -119d8/Hz similar to 124d8/Hz @1MHz. Its current is less than 12mA at a 1.2V voltage supply when it operates at the highest frequency of 6.2GHz.