999 resultados para eficiência de uso de nutrientes
Resumo:
Actually the energy efficiency is making more space in the industry, due to the search for the sustainability, the electrical energy costs reduction, the goals achievement or the efficiency of production processes. In consumer goods industries, such a beverage industry, as the work is based, the productivity is directly related to the electrical energy consumption. The development of methodologies and/or routines, in addition to some tools which allow to align more efficiently these two aspects (production and consumption of electrical energy), in the viewpoint of the Energy Conservation, is very important. In this case, the study will show the Plant Modulation concepts, a production management methodology, based in some factors related to the productive process, installed equipment, production supplies and energy cost. The proposed methodology was implanted in a plant along 2015 and show the results, in face to confirm its efficiency. Finally, in this study, it was shown the capacity of Plant Modulation to positively impact in the energy efficiency inside a big industry
Resumo:
Actually the energy efficiency is making more space in the industry, due to the search for the sustainability, the electrical energy costs reduction, the goals achievement or the efficiency of production processes. In consumer goods industries, such a beverage industry, as the work is based, the productivity is directly related to the electrical energy consumption. The development of methodologies and/or routines, in addition to some tools which allow to align more efficiently these two aspects (production and consumption of electrical energy), in the viewpoint of the Energy Conservation, is very important. In this case, the study will show the Plant Modulation concepts, a production management methodology, based in some factors related to the productive process, installed equipment, production supplies and energy cost. The proposed methodology was implanted in a plant along 2015 and show the results, in face to confirm its efficiency. Finally, in this study, it was shown the capacity of Plant Modulation to positively impact in the energy efficiency inside a big industry
Resumo:
O milho de segunda safra, também conhecido como milho safrinha, é definido como aquele semeado entre os meses de janeiro e março. Esta modalidade de cultivo atingiu no ano agrícola de 2013/2014 uma área plantada de 9,18 milhões de hectares, superior a área cultivada com milho primeira safra, que no mesmo período foi de 6,61 milhões de hectares. Na segunda safra, há alto risco de instabilidades climáticas, principalmente em decorrência de baixas temperaturas, geadas, má distribuição de chuvas e redução do fotoperíodo. Todos estes fatores prejudicam a atividade fotossintética do milho, reduzindo sua produtividade. No entanto, dada a importância deste cultivo, empresas públicas, privadas e universidades vêm buscando incrementar a produtividade e a estabilidade. Para isso, alguns caracteres são especialmente preconizados. Devido ao alto risco de perda por adversidades ambientais, muitos produtores investem pouco em adubação, principalmente adubação nitrogenada. Neste contexto, o desenvolvimento de plantas mais eficientes no uso e, ou, tolerantes ao estresse por nitrogênio, resultaria em maior segurança para o produtor. Não obstante, a precocidade tem elevada importância, já que materiais precoces reduzem o risco de perdas neste período. No entanto, a mesma deve estar sempre associada a alta produtividade. Assim, para a seleção simultânea destes caracteres, pode-se lançar mão de índices per se de resposta das plantas ao estresse, análises gráficas e, ou, índices de seleção simultânea. Adicionalmente, os valores genotípicos das linhagens para essas características, além de serem preditos via REML/BLUP single-trait (análise univariada), também podem ser preditos via REML/BLUP multi-trait (análise multivariada). Dessa forma, os valores genotípicos são corrigidos pela covariância existente entre os caracteres. Assim, o objetivo deste trabalho foi verificar a possibilidade de seleção simultânea para eficiência no uso e tolerância ao estresse por nitrogênio, além de plantas precoces e produtivas. Para isto, linhagens de milho tropical foram cultivadas e avaliadas para estes caracteres. Foram então simulados diversos cenários de seleção simultânea. A partir destes resultados, observou-se que o índice per se de resposta das plantas ao estresse Média Harmônica da Performance Relativa (MHPR) foi o mais eficiente na seleção de plantas eficientes no uso e tolerantes ao estresse por nitrogênio. Isto ocorreu devido a forte correlação desfavorável entre os índices que estimam a eficiência e a tolerância, além da superioridade e em acurácia, herdabilidade e ganhos com a seleção deste índice per se. Já para a seleção simultânea da produtividade e precocidade, o índice Aditivo de seleção simultânea, utilizando os valores genotípicos preditos via REML/BLUP single-trait se mostrou o mais eficiente, já que obteve ganhos satisfatórios em todos os caracteres e há a possibilidade de modular, de forma mais satisfatória, os ganhos em cada caractere. Conclui-se que a seleção simultânea tanto para eficiência no uso e tolerância ao estresse por nitrogênio, quanto para produtividade e precocidade são possíveis. Além disso, a escolha do melhor método de seleção simultânea depende da magnitude e do sentido da correlação entre os caracteres.
Resumo:
Os sistemas interativos estão cada vez mais presentes como recursos tecnológicos utilizados pelo homem, sendo que para que a interação ocorra é necessária uma adaptação destes aparatos às reais necessidades do homem. Para garantir a qualidade de interação é preciso focar no princípio da usabilidade do sistema, desenvolvido por Jakob Nielsen, (1994) aprimorando com isso aspectos de acessibilidade, flexibilidade e eficiência no uso, para que o recurso tecnológico torne-se um objeto de modificação nesta relação. Objetivo: desenvolver um painel interativo utilizando a tecnologia Kinect e com isso fornecer informações sobre autocuidado e prevenção de incapacidades da hanseníase para pacientes e profissionais da saúde. Metodologia: Está baseada no modelo consensual que propõe uma solução para o problema de projeto e apresenta-se dividida em quatro fases: (1) projeto informacional; (2) projeto conceitual; (3) projeto preliminar e (4) projeto detalhado. Resultados: foi produzido um protótipo contendo imagens, texto e vídeos com informações sobre a Hanseníase. Este é composto por material coletado nos manuais produzidos pelo Ministério da Saúde para orientação de cuidados na Hanseníase e um vídeo inserido para demonstrar como seria o acesso a este recurso, acessados por meio dos movimentos dos membros superiores no qual a pessoa posiciona-se, em frente ao painel, a uma distância de 80 cm, e seleciona o que deseja ver com uma das mãos, que se torna a \"mão virtual\" movida na tela e seleciona o material instrucional. Os requisitos funcionais e não funcionais foram organizados contendo a caracterização das imagens de forma legível e nítida e opções de textos buscando a compreensão e o acesso da população. Foram desenvolvidos 16 vídeos que ensinam como realizar os exercícios para prevenir incapacidades e possíveis deformidades, estimulando assim o autocuidado. Conclusão: O desenvolvimento de material educacional sobre a Hanseníase que utilize as novas tecnologias é escasso e pouco explorado pelos profissionais da reabilitação na hanseníase. Investir em ações que visem tornar a pessoa mais informada sobre sua doença e segura sobre seu tratamento, pode contribuir para a autonomia em parte dos cuidados e as novas tecnologias podem funcionar como importante aliado neste processo.
Resumo:
Plants produce a number of substances and products and primary and secondary metabolites (SM) are amongst them with many benefits but limitation as well. Usually, the fodder are not considered toxic to animals or as a source having higher SM. The Brachiaria decumbens has a considerable nutritional value, but it is considered as a toxic grass for causing photosensitization in animals, if the grass is not harvested for more than 30 days or solely. The absence of detailed information in the literature about SM in Brachiaria, metabolites production and its chemical profile enable us to focus not only on the nutritive value but to get answers in all aspects and especially on toxicity. The study was conducted in the period of december 2013 to december 2014; in greenhouse FZEA-USP. B. decumbens was used with two cutting heights (10 and 20 cm) and nitrogen doses (0, 150, 300 and 450 kg ha-1) in complete randomized block design. The bromatological analysis were carried out on near infrared spectroscopy. Generally, the application of 150 kg ha-1 N was sufficient to promote the nutritional value in B. decumbens but above it the nitrogen use efficiency decline significantly. The highest dry matter yield (99.97 g/pot) was observed in autumn and the lowest was in winter (30.20 g/pot). While, as per nitrogen dose the average highest dry matter yield was at 150 kg ha-1 (79.98 g/pot). The highest crude protein was observed in winter (11.88%) and the lowest in autumn (7.78%). By the cutting heights; the 10 cm proved to have high CP (9.51%). In respect of fibrous contents, the highest acid detergent fiber was noted in summer (36.37%) and lowest in winter (30.88%). While the neutral detergent fiber was being highest in autumn and lowest in spring (79.60%). The highest in vitro dry matter and organic matter digestibilities were noted at 300 kg ha-1 N; being 68.06 and 60.57%; respectively; with the lowest observed in without N treatments (62.63% and 57.97), respectively. For determination of the classes, types and concentration of SM in B. decumbens, phytochemical tests, thin layer and liquid chromatography-mass spectrometry and nuclear magnetic resonance analysis were carried out. Height, nitrogen and seasons significantly (P <0.0001) affected the secondary metabolic profile. A new protodioscin isomer (protoneodioscin (25S-)) was identified for first time in B. decumbens and is supposed to be the probable toxicity reason. Its structure was verified by 1D and 2D NMR techniques (1H, 13C) and 1D (COSY-45, edited HSQC, HMBC, H2BC, HSQC -TOCSY, NOESY and 1 H, 1 H, J). All factors influence the metabolic profile significantly (P <0.0001). The lowest phenols were at 300 kg ha-1 while the lowest flavones were at 0 kg ha-1. Season wise the highest phenols occurred in autumn (19.65 mg/g d.wt.) and highest flavones (28.87 mg/g d.wt.) in spring. Seasons effect the saponin production significantly (P <0.0001) and the results showed significant differences in the protodioscin (17.63±4.3 - 22.57±2.2 mg/g d.wt.) and protoneodioscin (23.3±1.2 - 31.07±2.9 mg/g d.wt.) concentrations. The highest protodioscin isomers concentrations were observed in winter and spring and by N doses the highest were noted in 300 kg ha-1. Simply, all factors significantly played their role in varying concentrations of secondary metabolites.
Lâminas de água salina e doses de adubação orgânica na produção de palma Miúda adensada no semiárido
Resumo:
Cactus pear is an important forage for livestock in semi-arid region of Brazil, due to its adaptation to climate conditions in this region, high productivity and nutritional value. The yield of this cactus has positively responded to techniques such as planting density, fertilization and cutting managements, however, in Rio Grande do Norte State, only certain areas have favorable climate conditions to the development of this crop. Drip irrigation, with a small amount of water, has proven to be an alternative to the viability of cactus pear cultivation in these areas. The research aimed to evaluate the effects of different levels of saline water and manure organic fertilization on the morphological characteristics and production of fresh and dry matter of the prickly-pear cactus cv. Miúda (Nopalea cochenillifera Salm Dick) in a dense planting system. The experiment was conducted at the Experimental Station of Terras Secas (EMPARN), Pedro Avelino, latitude 5°31'21" South and longitude 36°23'14" West. The soil was classified as Typical Cambisol Haplicum Carbonate and the water used in irrigation, C4S1T3 (5,25 dS.m-1), with planting spacing of 2.0 x 0.25 m (20,000 plants ha-1). A completely randomized design in a split plot was used, where water levels (0, 7.5, 15.0 and 30.0 mm month-1) with 10 days intervals, were the main plots and organic fertilization (0 , 25 and 50 Mg ha-1 yr-1) the subplots, with four replicates. The measured morphological characteristics were number of cladodes, height and volume of the plant; length, width, perimeter, thickness, area and cladodes area index, fresh and dry matter production, dry matter content, water use efficiency (WUE) and damage promoted by cochineal pest (Diaspis echinocacti) and soft rot (Erwinia carotovora). There was no influence (P>0.05) of organic fertilization on most variables, particularly in relation to the production of fresh and dry matter. The water levels had a significant influence (P<0.05) on most variables, promoting higher height and volume of the plants, larger and thicker cladodes, and increase on fresh and dry matter production (13.55 Mg DM ha-1 yr-1). The absence of irrigation caused a significant expansion in plant damage caused by the cochineal pest and when irrigated with different water levels there was an increase in damage and stand loss, caused by soft rot, been more intense at the higher water level.
Resumo:
Organo-mineral fertilizers have been used to both meet plants’ nutritional needs and reduce producers’ reliance on mineral fertilizers. This practice improves both the use of nutrients by plants and the soil structure due to the organic matter in these fertilizers. This study aimed to determine the effect of organic matter sources in the composition of organomineral fertilizers and compare it to the effect of traditional mineral fertilizers when it comes to the initial development of sorghum. Research was carried out in a greenhouse at the Federal University of Uberlandia, in Uberlandia, Minas Gerais, Brazil. Sorghum seeds of grain-bearing simple hybrid 1G100 were used in the seeding process. The experiment followed a randomized complete block design in a 4 x 3 + 2 factorial arrangement. Factors included four levels (50, 75, 100 and 125% of 450 kg ha-1, which is the recommended dose for sorghum crops), three organic matter sources in the composition of the organomineral fertilizers (sewage sludge, filter cake, and peat), a control (100% mineral fertilizer), and an untreated check (no fertilizers). Each experimental plot consisted of four plants divided into two pots. Oxisol was used in all pots. Analyses were performed at 30 and 60 days after seeding (DAS) and targeted: plant height, stem diameter, chlorophyll A, chlorophyll B, and leaf area. After this period, plants were removed from the soil, and had their aerial parts isolated to be dried in an air-forced oven before measurement of their dry mass. Means of the organomineral fertilizers outperformed those of both control and untreated check plots in almost all variables at 30 DAS. The only exception was variable stem diameter, in which organomineral fertilizers outperformed untreated check plots only. Sorghum fertilized with organomineral fertilizers also showed positive results in the variables analyzed at 60 DAS: even with dose reduction, their means were similar to those found in control plots. Organomineral fertilizers had higher means in some variables, such as diameter and dry mass of the aerial part, than both control and untreated check plots. In the conditions set in this study and considering the variables herein reported, organomineral fertilizers can substitute mineral fertilizers in the initial development of sorghum, even with some dose reductions.
Resumo:
Light varies widely in both time and space in forest formation of “Bioma Cerrado”. Cybistax antisyphilitica occurs in areas typical of this biome, such as cerrado sensu stricto, “cerradões”, and altered areas. The aim of this study was to understand the morphological and physiological responses of C. antisyphilitica to alterations in light intensity. Juvenile plants (5 month of age) were taken to a fragment of semideciduous forest in Uberlândia-MG, and were divided into three treatments: 50 were maintained under the canopy (UC) 20 were kept in small gap (SG) and 20 were maintained under in full sun (FS). The daily courses of chlorophyll a fluorescence were made at the beginning, middle and end of dry season in 2015. At the end of the experiment measurements of chlorophyll content, gas exchange and growth were made. The plants showed dynamic photoinhibition as exhibited by reductions on Fv/Fm close to midday at the end of the dry season. Regarding the effective quantum yield (ΔF/Fm'), plants under FS showed reduced values that coincided with the higher values of electron transport rates (ETR). Plants under FS showed higher values of net CO2 assimilation rates, stomatal conductance, transpiration rates, water use efficiency and chlorophyll content compared to plants under UC. The stem diameter, dry mass of leaves and stem, total dry mass and relative growth rate were higher in plants under FS than plants under UC. On the other hand, plants under UC showed superior values of height, specific leaf area and leaf area ratio. Our results indicate that C. antisyphilitica has plasticity to survive in the contrasting light environments of the semideciduous forests, but this species was able to growth better under full sun conditions.
Resumo:
Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.
Resumo:
The identification of genotypes for drought tolerance has a great importance in breeding programs. The aim of this study was to characterize genotypes of beans in response to drought tolerance in different reproductive stages through physiologic, agronomic and molecular analysis. The experiment was conducted in greenhouse, using a randomized block design with four replicates; 10 cultivars: ANFC 9, ANFP 110, BRS Esplendor, BRSMG Realce, IPR Siriri, IPR Tangará, IPR Tuiuiu, IPR Uirapuru, IAC Imperador and IAC Milênio under two conditions of irrigation: plants irrigated during their entire life cycle, and plants under irrigation suppression in the reproductive stage (R7) until 16% of field capacity, when the irrigation was restored. In the last four days of stress, the gas exchanges were analyzed, and in the last day of stress was analyzed the percentage of closed stomata in the abaxial surface of the leaves, collected in different times of the day (9h, 12h, 15h and 18h). Additionally, plant samples were collected for the following analysis: fresh and dry mass of leaves, stems and legumes, and proline content in leaves and roots. The plants were harvested at the physiological maturity and the yield components and grain yield were determined. In addition, in order to identify polymorphisms in the sequences of promoters and genes related to drought, seven pairs of primers were tested on the group of genotypes. The drought susceptibility indexes (ISS) ranged from 0.65 to 1.10 in the group of genotypes, which the lowest values observed were for IAC Imperador (0.65) and BRS Esplendor (0.87), indicating the ability of these two genotypes to maintain grain yield under water stress condition. All genotypes showed reduction in yield components under water stress. IAC Imperador (43.4%) and BRS Esplendor (60.6%) had the lowest reductions in productivity and kept about 50% of the stomata closed during all the different times evaluated at last day of irrigation suppression. IAC Imperador showed greater water use efficiency and CO2 assimilation rate under drought stress. IPR Tuiuiú, IPR Tangará and IAC Imperador had the highest proline concentrations in the roots. Under water stress condition, there was a strong positive correlation (0.696) between the percentage of stomata closed with the number of grains per plant (0.696) and the fresh mass of leaves (0.731), the maximum percentage of stomata closed 73.71% in water stress. The accumulation of proline in the root was the character that most contributed to the divergence between the genotypes under water deficit, but not always the genotypes that have accumulated more proline were the most tolerant. The polymorphisms in DNA of coding and promoting sequences of transcription factors studied in this experiment did not discriminate tolerant genotypes from the sensitive ones to water stress.
Resumo:
O objetivo desta tese foi avaliar a dinâmica do fósforo em cultivo heterotrófico e produção de compostos celulares por Aphanothece microscopica Nägeli visando avaliar a perspectiva de implementação de uma biorrefinaria microalgal. Desta forma, foi avaliado o comportamento do micro-organismo em estudo no cultivo heterotrófico, utilizando como meio de cultivo o efluente de laticínios. O trabalho foi desenvolvido em 3 etapas. Em um primeiro momento foi avaliada a influência da temperatura (20 e 30°C) e os valores máximos e mínimos de nutrientes, em especial do fósforo dissolvido reativo (PDR), disponíveis no efluente de laticínio, na remoção de nutrientes. Os resultados demonstraram que a concentração inicial de fósforo dissolvido e a temperatura exerceram influência no crescimento celular e na eficiência de remoção de nutrientes. Em termos de otimização de processo os cultivos conduzidos a 20°C e maiores concentrações de PDR (5,5 mg.L-1 ) no efluente de laticínio, foram os mais eficientes na conversão de poluentes em biomassa e remoção de nutrientes. A segunda etapa foi desenvolvida com o objetivo de avaliar a dinâmica de distribuição de fósforo na fase líquida e sólida do reator heterotrófico, quando o efluente de laticínio foi tratado pela Aphanothece microscopica Nägeli, a 20°C e nas máximas concentrações de fósforo dissolvido encontradas no efluente. Foi demonstrado que as formas fosforadas na fase líquida do reator se caracterizam pela predominância da fração dissolvida em comparação à particulada e por apresentar como fração predominante a de fósforo orgânico. No que se refere à fase sólida, ficou demonstrado que a Aphanothece microscopica Nägeli, quando cultivada heterotroficamente apresenta 3,8 vezes mais fósforo que o requerido para o crescimento celular. Ficando demonstrado ainda que a remoção biológica de fósforo por Aphanothece microscopica Nägeli pode resultar em substanciais aportes financeiros para as estações de tratamento de efluentes. Uma terceira etapa foi desenvolvida, a qual teve como objetivo avaliar a estimativa de produção de compostos celulares por Aphanothece microscopica Nägeli, a partir do efluente de laticínio, bem como o efeito da redução de temperatura de cultivo no teor de lipídios , no momento em que é obtida a máxima concentração deste componente celular, nas condições otimizadas.Foi obtido na fase logarítmica de crescimento, concentrações de 41,8 % de proteinas, carboidratos 28,5 %, lipídios 10,4 % e minerais 10,8 %. O maior teor de lipídio registrado a 20°C correspondeu a biomassa analisada na fase logarítmica.Com a redução da temperatura para 5°C por um período de 30 h é possível obter concentrações de lipídios 2,4 vezes superior ao registrado na fase logarítmica a 20 °C. No entanto, não foram indicadas diferenças significativas (p≤0,05) em função da temperatura entre as concentrações de lipídios obtidas para a biomassa a 10°C em 40 h. O perfil de ácidos graxos da biomassa gerada a 20°C, apresentou como ácidos graxos majoritários, os ácidos graxos: palmítico, oléico, γ-linolênico, palmitoleico e esteárico, resultando um aumento na concentração de ácidos graxos saturados as espensa dos insaturados, quando a temperatura é reduzida. Em paralelo,um reator heterotrófico descontinuo foi definido, ficando demonstrado que a extrapolação da operação em batelada para contínua requer um biorreator heterotrófico com volume útil de trabalho de 240,51 m 3 , permitindo tratar 950 m3 diários de efluente, gerando 11,8 kg.d-1 de biomassa útil para produção de compostos celulares por Aphanothece microscopica Nägeli, visando à simultânea remoção de matéria orgânica, nitrogênio total e fósforo total, gerando insumos que podem suportar a implementação de uma biorrefinaria microalgal.
Resumo:
No Submédio do Vale do São Francisco, o sistema de cultivo da cana-de-açúcar (Saccharum spp.) é baseado no fornecimento da água durante todo o seu ciclo. Nesta região, a irrigação na cana-de-açúcar tem sido feita por sulcos, aspersão (pivô central e linear) e por gotejamento subsuperficial, os quais proporcionam índices variáveis de eficiência no uso de água pela cultura. Dentre eles, o gotejamento subsuperficial é o mais eficiente, uma vez que disponibiliza água próximo ao sistema radicular e facilita a automação do sistema para irrigação e fertirrigação durante o ciclo da cultura.
Resumo:
Aumento da eficiência do uso de fertilizantes; Aumento da eficiência do uso da água; Redução do impacto dos defensivos agrícolas; Redução do monocultivo; Respeito às Áreas de Preservação Permanentes (APP) e Áreas de Reserva Legal (RL); Melhorias para o trabalhador rural; Redução da emissão de Gases do Efeito Estufa (GEE); Eficiência da mecanização das operações; Redução do êxodo rural; Redução do desmatamento.
Resumo:
O objetivo do trabalho foi avaliar a pegada hídrica das principais cultivares de soja como indicador de eficiência de uso da água em cultivos de grãos no município de Paragominas. Foi realizado trabalho de campo para acompanhar experimentos com soja visando obtenção de dados durante a safra agrícola 2013/2014. Considerou-se nas estimativas de pegada hídrica cinza o valor de 22 kg ha-1 de nitrogênio, com base na literatura nacional. As cultivares de soja BRS Candeia; BRS Sambaíba; BRS Tracajá; BRS Seridó RCH; BRS Babaçu foram consideradas nas avaliações da pegada hídrica de acordo com o ciclo médio, disponível na literatura. Considerou-se os padrões limites de lançamento de fertilizante nitrogenado em corpos hídricos, adotando-se valores conforme a legislação nº 357/2005 do Conselho Nacional de Meio Ambiente (CONAMA). Os resultados apontaram que a maior pegada hídrica foi na BRS Babaçu correspondendo a 1.306 m³ ton-1 e a menor foi na BRS Candeia com 1.015 m³ ton-1. Conclui-se que a pegada hídrica verde é um excelente indicador de eficiência de uso da água pela cultivar de soja utilizada em cada ano safra. Também, a quantidade de fertilizantes nitrogenados e o rendimento das cultivares são fatores determinantes na contabilidade de uso eficiente de água em polos grãos na Amazônia.
Resumo:
O objetivo do trabalho foi avaliar a influencia de diferentes lâminas de irrigação sobre alguns parâmetros fisiológicos do milho verde, como índice de área foliar e o teor de clorofila total, relacionando-os com a produtividade de espigas verdes e com a eficiência do uso da água. O experimento foi conduzido de setembro a novembro de 2009, em Teresina- PI, na Embrapa Meio-Norte, em um Argissolo Vermelho Amarelo eutrófico, a cultivar utilizada foi o híbrido duplo AG1051. O delineamento experimental foi o de blocos ao acaso com quatro repetições, e como tratamentos cinco lâminas de irrigação baseadas em frações da evapotranspiração de referência (25 %, 50 %, 75 %, 100 % e 125 % da ETo). Os melhores resultados 13.453,13 kg ha-1 e 8.465.62 kg ha-1 de espigas verdes empalhadas e despalhadas foram obtidos com a maior lâmina. O déficit hídrico imposto no estádio V6 (sexta folha completa) reduziu linearmente o índice de área foliar e o teor de clorofila total. Houve uma correlação positiva significativa (p < 0,05) da produtividade de espigas verdes despalhadas com o IAF e o teor de clorofila total. A mais alta eficiência do uso da água (2,48 kg m-3) foi obtida com aplicação da maior lâmina (340,57mm).