Sensitivity of peak positions to flight-path parameters in a deep-inelastic scattering neutron TOF spectrometer

The effects of small changes in flight-path parameters (primary and secondary flight paths, detector angles), and of displacement of the sample along the beam axis away from its ideal position, are examined for an inelastic time-of-flight (TOF) neutron spectrometer, emphasising the deep-inelastic regime. The aim was to develop a rational basis for deciding what measured shifts in the positions of spectral peaks could be regarded as reliable in the light of the uncertainties in the calibrated flight-path parameters. Uncertainty in the length of the primary or secondary flight path has the least effect on the positions of the peaks of H, D and He, which are dominated by the accuracy of the calibration of the detector angles. This aspect of the calibration of a TOF spectrometer therefore demands close attention to achieve reliable outcomes where the position of the peaks is of significant scientific interest and is discussed in detail. The corresponding sensitivities of the position of peak of the Compton profile, J(y), to flight-path parameters and sample position are also examined, focusing on the comparability across experiments of results for H, D and He. We show that positioning the sample to within a few mm of the ideal position is required to ensure good comparability between experiments if data from detectors at high forward angles are to be reliably interpreted.

I know, but I don’t care : how awareness of Queensland’s drug driving testing methods impact upon perceptions of deterrence and offending behaviours

An increasing body of research is highlighting the involvement of illicit drugs in many road fatalities. Deterrence theory has been a core conceptual framework underpinning traffic enforcement as well as interventions designed to reduce road fatalities. Essentially the effectiveness of deterrence-based approaches is predicated on perceptions of certainty, severity, and swiftness of apprehension. However, much less is known about how the awareness of legal sanctions can impact upon the effectiveness of deterrence mechanisms and whether promoting such detection methods can increase the deterrent effect. Nevertheless, the implicit assumption is that individuals aware of the legal sanctions will be more deterred. This study seeks to explore how awareness of the testing method impacts upon the effectiveness of deterrence-based interventions and intentions to drug drive again in the future. In total, 161 participants who reported drug driving in the previous six months took part in the current study. The results show that awareness of testing had a small effect upon increasing perceptions of the certainty of apprehension and severity of punishment. However, awareness was not a significant predictor of intentions to drug drive again in the future. Importantly, higher levels of drug use were a significant predictor of intentions to drug drive in the future. Whilst awareness does have a small effect on deterrence variables, the influence of levels of drug use seems to reduce any deterrent effect.

Synthesis of an erodible biomimetic hydrogel for drug delivery using native chemical ligation

Hydrogels are hydrophilic, three dimensional polymers that imbibe large quantities of water while remaining insoluble in aqueous solutions due to chemical or physical cross-linking. The polymers swell in water or biological fluids, immobilizing the bioactive agent, leading to drug release in a well-defined specific manner. Thus the hydrogels’ elastic properties, swellability and biocompatibility make them excellent formulations for drug delivery. Currently, many drug potencies and therapeutic effects are limited or otherwise reduced because of the partial degradation that occurs before the administered drug reaches the desired site of action. On the other hand, sustained release medications release drugs continually, rather than providing relief of symptoms and protection solely when necessary. In fact, it would be much better if drugs could be administered in a manner that precisely matches physiological needs at desired times and at the desired site (site specific targeting). There is therefore an unmet need to develop controlled drug delivery systems especially for delivery of peptide and protein bound drugs. The purpose of this project is to produce hydrogels for structural drug delivery and time-dependent sustained release of drugs (bioactive agents). We use an innovative polymerisation strategy based on native chemical ligation (NCL) to covalently cross-link polymers to form hydrogels. When mixed in aqueous solution, four armed (polyethylene glycol) amine (PEG-4A) end functionalised with thioester and four branched Nterminal cysteine peptide dendrimers spontaneously conjugated to produce biomimetic hydrogels. These hydrogels showed superior resistance to shear stress compared to an equivalent PEG macromonomer system and were shown to be proteolytically degradable with concomitant release of a model payload molecule. This is the first report of a peptide dendrimers/PEG macromonomer approach to hydrogel production and opens up the prospect of facile hydrogel synthesis together with tailored payload release.

Advanced Bioactive Inorganic Materials for Bone Regeneration and Drug Delivery

Bioceramics play an important role in repairing and regenerating bone defects. Annually, more than 500,000 bone graft procedures are performed in the United states and approximately 2.2 million are conducted worldwide. The estimated cost of these procedures approaches $2.5billion per year. Around 60% of the bone graft substitutes available on the market involve bioceramics. It is reported that bioceramics in the world market increase by 9% per year. For this reason, the research of bioceramics has been one of the most active areas during, the past several years. Considering the significant importance of bioceramics, our goal was to compile this book to review the latest research advances in the field of bioceramics. The text also summarizes our work during the past 10 years in an effort to share innovative concepts, design of bioceramisc, and methods for material synthesis and drug delivery. We anticipate that this text will provide some useful information and guidance in the bioceramics field for biomedical engineering researchers and material scientists. Information on novel mesoporous bioactive glasses and silicate-based ceramics for bone regeneration and drug delivery are presented. Mesoporous bioactive glasses have shown multifunctional characteristics of bone regeneration and drug delivery due to their special mesopore structures,whereas silicated-based bioceramics, as typical third-generation biomaterials,possess significant osteostimulation properties. Silica nanospheres with a core-shell structure and specific properties for controllable drug delivery have been carefully reviewed-a variety of advanced synthetic strategies have been developed to construct functional mesoporous silica nanoparticles with a core-shell structure, including hollow, magnetic, or luminescent, and other multifunctional core-shell mesoporous silica nanoparticles. In addition, multifunctional drug delivery systems based on these nanoparticles have been designed and optimized to deliver the drugs into the targeted organs or cells,with a controllable release fashioned by virtue of various internal and external triggers. The novel 3D-printing technique to prepare advanced bioceramic scaffolds for bone tissue engineering applications has been highlighted, including the preparation, mechanical strength, and biological properties of 3D-printed porous scaffolds of calcium phosphate cement and silicate bioceramics. Three-dimensional printing techniques offer improved large-pore structure and mechanical strength. In addition , biomimetic preparation and controllable crystal growth as well as biomineralization of bioceramics are summarized, showing the latest research progress in this area. Finally, inorganic and organic composite materials are reviewed for bone regeneration and gene delivery. Bioactive inorganic and organic composite materials offer unique biological, electrical, and mechanical properties for designing excellent bone regeneration or gene delivery systems. It is our sincere hope that this book will updated the reader as to the research progress of bioceramics and their applications in bone repair and regeneration. It will be the best reward to all the contributors of this book if their efforts herein in some way help reader in any part of their study, research, and career development.

Risk-taking, harm and help-seeking : reported by young people in treatment at a youth alcohol and drug counselling service

Regarded as a normative component of development, risk-taking by young people is a well-researched subject, and some risk-taking behaviours, such as substance use, are particularly well covered because of their potential to adversely affect health and wellbeing. What has remained unclear is the extent of young people's risk-taking while engaged in alcohol and other drug (AOD) treatment, their awareness of the related harms of risk-taking behaviours, and their prior help-seeking for these harms - information which may have a significant impact on the quality and relevance of the care they receive. This paper reports the findings from a brief pilot study exploring those factors in a clinical sample of young people engaged in ongoing AOD counselling.

Ethanol sensitivity of thermally evaporated nanostructured WO3 thin films doped and implanted with Fe

Ethanol sensing performance of gas sensors made of Fe doped and Fe implanted nanostructured WO3 thin films prepared by a thermal evaporation technique was investigated. Three different types of nanostructured thin films, namely, pure WO3 thin films, iron-doped WO3 thin films by co-evaporation and Fe-implanted WO3 thin films have been synthesized. All the thin films have a film thickness of 300 nm. The physical, chemical and electronic properties of these films have been optimized by annealing heat treatment at 300ºC and 400ºC for 2 hours in air. Various analytical techniques were employed to characterize these films. Atomic Force Microscopy and Transmission Electron Microscopy revealed a very small grain size of the order 5-10 nm in as-deposited WO3 films, and annealing at 300ºC or 400ºC did not result in any significant change in grain size. This study has demonstrated enhanced sensing properties of WO3 thin film sensors towards ethanol at lower operating temperature, which was achieved by optimizing the physical, chemical and electronic properties of the WO3 film through Fe doping and annealing.

Sensitivity of edge detection methods for quantifying cell migration assays

Quantitative imaging methods to analyze cell migration assays are not standardized. Here we present a suite of two–dimensional barrier assays describing the collective spreading of an initially–confined population of 3T3 fibroblast cells. To quantify the motility rate we apply two different automatic image detection methods to locate the position of the leading edge of the spreading population after 24, 48 and 72 hours. These results are compared with a manual edge detection method where we systematically vary the detection threshold. Our results indicate that the observed spreading rates are very sensitive to the choice of image analysis tools and we show that a standard measure of cell migration can vary by as much as 25% for the same experimental images depending on the details of the image analysis tools. Our results imply that it is very difficult, if not impossible, to meaningfully compare previously published measures of cell migration since previous results have been obtained using different image analysis techniques and the details of these techniques are not always reported. Using a mathematical model, we provide a physical interpretation of our edge detection results. The physical interpretation is important since edge detection algorithms alone do not specify any physical measure, or physical definition, of the leading edge of the spreading population. Our modeling indicates that variations in the image threshold parameter correspond to a consistent variation in the local cell density. This means that varying the threshold parameter is equivalent to varying the location of the leading edge in the range of approximately 1–5% of the maximum cell density.

The N550K/H mutations in FGFR2 confer differential resistance to PD173074, dovitinib and ponatinib ATP-competitive inhibitors

We sought to identify fibroblast growth factor receptor 2 (FGFR2) kinase domain mutations that confer resistance to the pan-FGFR inhibitor, dovitinib, and explore the mechanism of action of the drug-resistant mutations. We cultured BaF3 cells overexpressing FGFR2 in high concentrations of dovitinib and identified fourteen dovitinib-resistant mutations, including the N550K mutation observed in 25% of FGFR2mutant endometrial cancers (EC). Structural and biochemical in vitro kinase analyses, together with BaF3 proliferation assays, showed that the resistance mutations elevate the intrinsic kinase activity of FGFR2. BaF3 lines were used to assess the ability of each mutation to confer cross-resistance to PD173074 and ponatinib. Unlike PD173074, ponatinib effectively inhibited all the dovitinib-resistant FGFR2 mutants except the V565I gatekeeper mutation, suggesting ponatinib but not dovitinib targets the active conformation of FGFR2 kinase. EC cell lines expressing wild-type FGFR2 were relatively resistant to all inhibitors. Whereas EC cell lines expressing mutated FGFR2 showed differential sensitivity. Within the FGFR2mutant cell lines, 3/7 showed marked resistance to PD173074 and relative resistance to dovitinib and ponatinib. This suggests that alternative mechanisms distinct from kinase domain mutations are responsible for intrinsic resistance in these three EC lines. Finally, overexpression of FGFR2N550K in JHUEM-2 cells (FGFR2C383R) conferred resistance (~5 fold) to PD173074, providing independent data that FGFR2N550K can be associated with drug resistance. Biochemical in vitro kinase analyses also shows ponatinib is more effective than dovitinib at inhibiting FGFR2N550K. We propose tumors harboring mutationally activated FGFRs should be treated with FGFR inhibitors that specifically bind the active kinase.

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

Understanding the operational structure of Southeast Asian drug trafficking groups in Australia

This thesis examined the operational structure of Southeast Asian drug trafficking groups operating on the eastern seaboard of Australia by testing the validity and application of organised crime and drug trafficking typologies using data obtained from 159 drug trafficking cases in three Australian states: New South Wales; Queensland; and Victoria. Key findings indicated that the usefulness of typologies is limited when classifying and analysing organised crime groups. In particular, Southeast Asian drug trafficking groups operated largely in small, informal, family-based hierarchies or groups that were better conceptualised using theoretical perspectives from network and cultural studies. The study recommended that replicating previous empirical research in the field is an effective approach that will contribute towards building a cumulative body of knowledge on organised crime structures.

Youth Alcohol and Drug Practice Guide 3 : Practice Strategies and Interventions

This guide canvasses a range of practice strategies and interventions utilised by workers and services who engage with young people experiencing problematic AOD use whilst also exploring the many and varied challenges associated with this type of work.

Validating a screening tool for mental health and substance use risk in an Indigenous prison population

Introduction and Aims: The Indigenous Risk Impact Screen (IRIS) is a validated culturally appropriate and widely used tool in the community for assessing substance use and mental disorder. This research aimed to assess the utility of this tool in an Indigenous prison population. Design and Methods: The study used data collected from a cross-sectional study of mental health among indigenous inmates in Queensland custodial centres (n=395, 84% male). Participants were administered a modified version of the IRIS, and ICD-10 diagnoses of substance use, depressive and anxiety disorders obtained using the Composite International Diagnostic Interview (CIDI). The concurrent validity of the modified IRIS was assessed against those of the CIDI. Results: 312 people screened as high risk for a substance use disorder and 179 were high risk for mental problems. 73% of males and 88% of females were diagnosed with a mental disorder. The IRIS was an effective screener for substance use disorders, with high sensitivity (Se) of 94% and low specificity (Sp) of 33%. The screener was less effective in identifying depression (Se 82%, Sp 59%) and anxiety (Se 68%, Sp 60%). Discussion: The IRIS is the first culturally appropriate screening instrument to be validated for the risk of drug and alcohol and mental disorder among Indigenous adults in custody. Conclusions: This study demonstrated that the IRIS is a valid tool for screening of alcohol and drug use risk among an incarcerated Indigenous population. The IRIS could offer an opportunity to improve the identification, treatment and health outcomes for incarcerated Indigenous adults.

Factors associated with common mental disorders during the transition to adulthood : do emerging adults and ‘early starters’ differ? Findings from an Australian birth cohort study

Background: Despite increasing diversity in pathways to adulthood, choices available to young people are influenced by environmental, familial and individual factors, namely access to socioeconomic resources, family support and mental and physical health status. Young people from families with higher socioeconomic position (SEP) are more likely to pursue tertiary education and delay entry to adulthood, whereas those from low socioeconomic backgrounds are less likely to attain higher education or training, and more likely to partner and become parents early. The first group are commonly termed ‘emerging adults’ and the latter group ‘early starters’. Mental health disorders during this transition can seriously disrupt psychological, social and academic development as well as employment prospects. Depression, anxiety and most substance use disorders have early onset during adolescence and early adulthood with approximately three quarters of lifetime psychiatric disorders having emerged by 24 years of age. Aims: This thesis aimed to explore the relationships between mental health, sociodemographic factors and family functioning during the transition to adulthood. Four areas were investigated: 1) The key differences between emerging adults and ‘early starters’, were examined and focused on a series of social, economic, and demographic factors as well as DSM-IV diagnoses; 2) Methodological issues associated with the measurement of depression and anxiety in young adults were explored by comparing a quantitative measure of symptoms of anxiety and depression (Achenbach’s YSR and YASR internalising scales) with DSM-IV diagnosed depression and anxiety. 3) The association between family SEP and DSM-IV depression and anxiety was examined in relation to the different pathways to adulthood. 4) Finally, the association between pregnancy loss, abortion and miscarriage, and DSM-IV diagnoses of common psychiatric disorders was assessed in young women who reported early parenting, experiencing a pregnancy loss, or who had never been pregnant. Methods: Data were taken from the Mater University Study of Pregnancy (MUSP), a large birth cohort started in 1981 in Brisbane, Australia. 7223 mothers and their children were assessed five times, at 6 months, 5, 14 and 21 years after birth. Over 3700 young adults, aged 18 to 23 years, were interviewed at the 21-year phase. Respondents completed an extensive series of self-reported questionnaires and a computerised structured psychiatric interview. Three outcomes were assessed at the 21-year phase. Mental health disorders diagnosed by a computerised structured psychiatric interview (CIDI-Auto), the prevalence of DSM-IV depression, anxiety and substance use disorders within the previous 12-month, during the transition (between ages of 18 and 23 years) or lifetime were examined. The primary outcome “current stage in the transition to adulthood” was developed using a measure conceptually constructed from the literature. The measure was based on important demographic markers, and these defined four independent groups: emerging adults (single with no children and living with parents), and three categories of ‘early starter’, singles (with no children or partner, living independently), those with a partner (married or cohabitating but without children) and parents. Early pregnancy loss was assessed using a measure that also defined four independent groups and was based on pregnancy outcomes in the young women This categorised the young women into those who were never pregnant, women who gave birth to a live child, and women who reported some form of pregnancy loss, either an abortion or a spontaneous miscarriage. A series of analyses were undertaken to test the study aims. Potential confounding and mediating factors were prospectively measured between the child’s birth and the 21-year phase. Binomial and multinomial logistic regression was used to estimate the risk of relevant outcomes, and the associations were reported as odds ratios (OR) and 95% confidence intervals (95%CI). Key findings: The thesis makes a number of important contributions to our understanding of the transition to adulthood, particularly in relation to the mental health consequences associated with different pathways. Firstly, findings from the thesis clearly showed that young people who parented or partnered early fared worse across most of the economic and social factors as well as the common mental disorders when compared to emerging adults. That is, young people who became early parents were also more likely to experience recent anxiety (OR=2.0, 95%CI 1.5-2.8) and depression (OR=1.7, 95%CI 1.1-2.7) than were emerging adults after taking into account a range of confounding factors. Singles and those partnering early also had higher rates of lifetime anxiety and depression than emerging adults. Young people who partnered early, but were without children, had decreased odds of recent depression; this may be due to the protective effect of early marriage against depression. It was also found that young people who form families early had an increased risk of cigarette smoking (parents OR=3.7, 95%CI 2.9-4.8) compared to emerging adults, but not heavy alcohol (parents OR=0.4, 95%CI 0.3-0.6) or recent illicit drug use. The high rates of cigarette smoking and tobacco use disorders in ‘early starters’ were explained by common risk factors related to early adversity and lower SEP. Having a child and early marriage may well function as a ‘turning point’ for some young people, it is not clear whether this is due to a conscious decision to disengage from a previous ‘substance using’ lifestyle or simply that they no longer have the time to devote to such activities because of child caring. In relation to the methodological issues associated with assessing common mental disorders in young adults, it was found that although the Achenbach empirical internalising scales successfully predicted both later DSM-IV depression (YSR OR=2.3, 95%CI 1.7-3.1) and concurrently diagnosed depression (YASR OR=6.9, 95%CI 5.0- 9.5) and anxiety (YASR OR=5.1, 95%CI 3.8- 6.7), the scales discriminated poorly between young people with or without DSM-IV diagnosed mood disorder. Sensitivity values (the proportion of true positives) for the internalising scales were surprisingly low. Only a third of young people with current DSM-IV depression (range for each of the scales was between 34% to 42%) were correctly identified as cases by the YASR internalising scales, and only a quarter with current anxiety disorder (range of 23% to 31%) were correctly identified. Also, use of the DSM-oriented scales increased sensitivity only marginally (for depression between 2-8%, and anxiety between 2-6%) above the standard Achenbach scales. This is despite the fact that the DSM-oriented scales were originally developed to overcome the poor prediction of DSM-IV diagnoses by the Achenbach scales. The internalising scales, both standard and DSM-oriented, were much more effective at identifying young people with comorbid depression and anxiety, with OR’s 10.1 to 21.7 depending on the internalising scale used. SEP is an important predictor of both an early transition to adulthood and the experience of anxiety during that time Family income during adolescence was a strong predictor of early parenting and partnering before age 24 but not early independent living. Compared to families in the upper quintile, young people from families with low income were nearly twice as likely to live with a partner and four times more likely to become parents (OR ranged from 2.6 to 4.0). This association remained after adjusting for current employment and education level. Children raised in low income families were 30% more likely to have an anxiety disorder (OR=1.3, 95%CI 0.9-1.9), but not depression, as young adults when compared to children from wealthier families. Emerging adults and ‘early starters’ from low income families did not differ in their likelihood of having a later anxiety disorder. Young women reporting a pregnancy loss had nearly three times the odds of experiencing a lifetime illicit drug disorder (excluding cannabis) [abortion OR=3.6, 95%CI 2.0-6.7 and miscarriage OR=2.6, 95%CI 1.2-5.4]. Abortion was associated with alcohol use disorder (OR=2.1, 95%CI 1.3- 3.5) and 12-month depression (OR=1.9, 95%CI 1.1- 3.1). These finding suggest that the association identified by Fergusson et al between abortion and later psychiatric disorders in young women may be due to pregnancy loss and not to abortion, per se. Conclusion: Findings from this thesis support the view that young people who parent or partner early have a greater burden of depression and anxiety when compared to emerging adults. As well, young women experiencing pregnancy loss, from either abortion or miscarriage, are more likely to experience depression and anxiety than are those who give birth to a live infant or who have never been pregnant. Depression, anxiety and substance use disorders often go unrecognised and untreated in young people; this is especially true in young people from lower SEP. Early identification of these common mental health disorders is important, as depression and anxiety experienced during the transition to adulthood have been found to seriously disrupt an individual’s social, educational and economic prospects in later life.

Metabolomics coupled with proteomics advancing drug discovery toward more agile development of targeted combination therapies

To enhance the therapeutic efficacy and reduce the adverse effects of traditional Chinese medicine, practitioners often prescribe combinations of plant species and/or minerals, called formulae. Unfortunately, the working mechanisms of most of these compounds are difficult to determine and thus remain unknown. In an attempt to address the benefits of formulae based on current biomedical approaches, we analyzed the components of Yinchenhao Tang, a classical formula that has been shown to be clinically effective for treating hepatic injury syndrome. The three principal components of Yinchenhao Tang are Artemisia annua L., Gardenia jasminoids Ellis, and Rheum Palmatum L., whose major active ingredients are 6,7-dimethylesculetin (D), geniposide (G), and rhein (R), respectively. To determine the mechanisms underlying the efficacy of this formula, we conducted a systematic analysis of the therapeutic effects of the DGR compound using immunohistochemistry, biochemistry, metabolomics, and proteomics. Here, we report that the DGR combination exerts a more robust therapeutic effect than any one or two of the three individual compounds by hitting multiple targets in a rat model of hepatic injury. Thus, DGR synergistically causes intensified dynamic changes in metabolic biomarkers, regulates molecular networks through target proteins, has a synergistic/additive effect, and activates both intrinsic and extrinsic pathways.