Propriedades estruturais e espectroscópicas de complexos de difenilfosfinatos dos sistemas ternários 'LA'-'CE'-'EU'/'LA'-CE'-'TB'

Pós-graduação em Química - IQ

Effect of Zn2+ ions on the structure, morphology and optical properties of CaWO4 microcrystals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products

Características de atributos do solo em ambientes da região Sul do estado do Amazonas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Cor do solo na caracterização de áreas específicas de manejo para cultura do café

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Preparação pelo método poliol modificado, caracterização estrutural e espectroscópia de nanopós de niobato de potássio e neodímio e de suas condições sólidas dopadas em európio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento do fósforo adsorvido por meio da cor e da suscetibilidade magnética do solo

The objective of this work was to evaluate the possibility of mapping adsorbed phosphorus through soil color and magnetic susceptibility. The experiment was done in a 380-ha sugarcane area, which included four types of Oxisols, with different texture and natural fertility. Two hundred and forty-one soil samples were collected at 0.00-0.25-m depth. The soil redness index was calculated from sample values of hue, value, and chroma, obtained with diffuse reflectance spectroscopy. Regression models were adjusted between adsorbed phosphorus and soil magnetic susceptibility or redness index. Data spatial dependence was evaluated with geostatistics. Magnetic susceptibility is significantly correlated to adsorbed phosphorus, which allows it to be used as a component in pedotransfer functions for indirect quantification of soil adsorbed phosphorus. The redness index and the magnetic susceptibility show spatial dependency with adsorbed phosphorus. Soil magnetic susceptibility and redness index, evaluated with diffuse reflectance spectroscopy, can aid in the mapping and identification of areas with different phosphorus adsorption potential.

Multifunction hexagonal liquid-crystal containing modified surface TiO2 nanoparticles and terpinen-4-ol for controlled release

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A joint experimental and theoretical study on the electronic structure and photoluminescence properties of Al-2(WO4)(3) powders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Field-scale spatial correlation between contents of iron oxides and CO2 emission in an Oxisol cultivated with sugarcane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sistemas de screening para detecção de furfural e hidroximetilfurfural e amostras de cachaça por espectroscopia de reflectância difusa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de procedimentos e métodos analíticos no campo forense aplicando os princípios da química verde

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Photocatalytic degradation of phenolic compounds with new TiO2 catalysts

[EN] New TiO2 catalysts have been synthesised by means of a sol–gel method in which aggregates have been selected before thermal treatment. Sieving and calcination temperature have been proved to be key factors in obtaining catalysts with greater photoactivity than that of Degussa P-25. These new catalysts have been characterized by means of transmission electron microscopy (TEM), BET surface area, diffuse reflectance spectroscopy (DRS), UV–vis spectroscopy, Fourier transformed infrared (FTIR) and X-ray diffraction (XRD). The different parameters studied were compared to those obtained from two commercial catalysts (Degussa P-25 and Hombikat-UV100). The photocatalytic efficiency of the new catalysts was evaluated by the degradation of various phenolic compounds using UV light (maximum around 365 nm, 9mW). The catalyst sieved and calcinated at 1023 K, ECT-1023t, showed phenol degradation rates 2.7 times higher than those of Degussa P-25. Also in the degradation of different phenolic compounds, this catalyst showed a higher activity than that of the commercial one. The high photoactivity of this new catalyst has been attributed to the different distribution of surface defects (determined from FTIR studies) and its increased capacity to yield H2O2

Anaerobic oxidation of ethanol over spinel mixed oxides: the first step in the steam-iron process for H2 production

The future hydrogen demand is expected to increase, both in existing industries (including upgrading of fossil fuels or ammonia production) and in new technologies, like fuel cells. Nowadays, hydrogen is obtained predominantly by steam reforming of methane, but it is well known that hydrocarbon based routes result in environmental problems and besides the market is dependent on the availability of this finite resource which is suffering of rapid depletion. Therefore, alternative processes using renewable sources like wind, solar energy and biomass, are now being considered for the production of hydrogen. One of those alternative methods is the so-called “steam-iron process” which consists in the reduction of a metal-oxide by hydrogen-containing feedstock, like ethanol for instance, and then the reduced material is reoxidized with water to produce “clean” hydrogen (water splitting). This kind of thermochemical cycles have been studied before but currently some important facts like the development of more active catalysts, the flexibility of the feedstock (including renewable bio-alcohols) and the fact that the purification of hydrogen could be avoided, have significantly increased the interest for this research topic. With the aim of increasing the understanding of the reactions that govern the steam-iron route to produce hydrogen, it is necessary to go into the molecular level. Spectroscopic methods are an important tool to extract information that could help in the development of more efficient materials and processes. In this research, ethanol was chosen as a reducing fuel and the main goal was to study its interaction with different catalysts having similar structure (spinels), to make a correlation with the composition and the mechanism of the anaerobic oxidation of the ethanol which is the first step of the steam-iron cycle. To accomplish this, diffuse reflectance spectroscopy (DRIFTS) was used to study the surface composition of the catalysts during the adsorption of ethanol and its transformation during the temperature program. Furthermore, mass spectrometry was used to monitor the desorbed products. The set of studied materials include Cu, Co and Ni ferrites which were also characterized by means of X-ray diffraction, surface area measurements, Raman spectroscopy, and temperature programmed reduction.

A chemical-loop approach for the generation of hydrogen by means of ethanol reforming

The work investigates the feasibility of a new process aimed at the production of hydrogen with inherent separation of carbon oxides. The process consists in a cycle in which, in the first step, a mixed metal oxide is reduced by ethanol (obtained from biomasses). The reduced metal is then contacted with steam in order to split the water and sequestrating the oxygen into the looping material’s structure. The oxides used to run this thermochemical cycle, also called “steam-iron process” are mixed ferrites in the spinel structure MeFe2O4 (Me = Fe, Co, Ni or Cu). To understand the reactions involved in the anaerobic reforming of ethanol, diffuse reflectance spectroscopy (DRIFTS) was used, coupled with the mass analysis of the effluent, to study the surface composition of the ferrites during the adsorption of ethanol and its transformations during the temperature program. This study was paired with the tests on a laboratory scale plant and the characterization through various techniques such as XRD, Mössbauer spectroscopy, elemental analysis... on the materials as synthesized and at different reduction degrees In the first step it was found that besides the generation of the expected CO, CO2 and H2O, the products of ethanol anaerobic oxidation, also a large amount of H2 and coke were produced. The latter is highly undesired, since it affects the second step, during which water is fed over the pre-reduced spinel at high temperature. The behavior of the different spinels was affected by the nature of the divalent metal cation; magnetite was the oxide showing the slower rate of reduction by ethanol, but on the other hand it was that one which could perform the entire cycle of the process more efficiently. Still the problem of coke formation remains the greater challenge to solve.