Estudo da utilização de polímeros naturais como auxiliares de floculação no tratamento de água para fins industriais

Este trabalho consiste em avaliar a eficiência de novas alternativas de uso com as espécies naturais do quiabo (Abelmoschus esculentus), da semente de angico-vermelho (Anadenanthera peregrina (L.) Speng) e da semente de olho-de-dragão (Adenanthera pavonina L.) conhecido também como falso angico, pulverizados com granulometria de 0,074 mm, para tratamento de água como polímeros naturais auxiliar de floculação na remoção principalmente dos parâmetros turbidez e cor para fins industriais, através de tratamento em ensaio no mecanismo de varredura utilizando o equipamento estático de bancada Jar Test com adição de coagulante químico (sulfato de alumínio). O pó dos polímeros foi obtido após higienização, secagem, trituração, moagem, peneiramento, e utilizado no processo de coagulação, floculação e sedimentação para testar a eficiência de cada um, quando usado só e quando usado em conjunto com o coagulante químico, seguido da análise dos parâmetros físico-químicos pH, turbidez, cor aparente, cor verdadeira e temperatura. Os resultados mostraram que o polímero do quiabo apresentou melhor eficiência na remoção da turbidez e cor em relação às mesmas dosagens usadas com os demais polímeros analisados e quando se fez a redução da dosagem do coagulante usado em conjunto com os polímeros, observou uma ótima remoção da turbidez, principalmente com o conjunto coagulante e polímero de quiabo, com a eficiência de remoção de 94% da turbidez e de 98% da cor com dosagem ótima do quiabo igual a 1,0 mg/L e do coagulante de 10 mg/L. Portanto é possível fazer uma redução da dosagem do coagulante quando usado em conjunto com o auxiliar de floculação, pois o polímero de quiabo pode ser usado para tratamento de água e frente à possibilidade de múltiplos usos econômicos e ecológicos na indústria.

Nanocompósito de alumina com inclusão nonométricas de zircônia para infraestruturas de próteses odontológicas livres de metal: avaliação de prosperidades mecânicas e análise microestrutural. -

Pós-graduação em Reabilitação Oral - FOAR

Gestão de resíduos de demolição e da construção civil no município de Guaratinguetá-SP

The large volume of waste generated by construction and demolition has become increasingly a matter of concern to society. The handling and disposal of RCD's to gain prominence as over the years intensified the requirements for a sustainable world. This paper presents the positive and negative factors that the management of construction and demolition waste can bring in the municipality of Guaratinguetá-SP. This study examines the methods used in waste management since he was not done any treatment to the present day. Presents comparative tables on the feasibility of installing a central crushing of inert waste and implementation of an inert waste landfill in the municipality of Guaratinguetá and Cachoeira Paulista. And yet the work being done by the city of Guaratinguetá reuse the material in class A in paving roads

Medidas de adequação dos impactos causados por uma indústria de esmagamento de soja

In the last years, environmental issues are being gradually addressed because of awareness regarding the limitation of natural resources for the maintenance of life on Earth, and the role played by the media in reporting on various issues that are related to the theme. In the industrial sector, this topic becomes ever more present in its planning. With the increase of production activities, the generation of waste causes many complications, both in industry and in the environment. For this reason laws and rules were created so that such problems are minimized, thus causing less impact on the environment. In this work was a study of the possible environmental impacts in a soybean crushing industry, situated in the city of Osvaldo Cruz, São Paulo state, detailing the sources and impacts of waste generation, and associate them relevant laws. From this, measures were proposed measures of adequacy involving compliance with commitments to environmental agencies, relevant requests of buyers and / or suppliers and improving environmental performance

Utilização do cavaco de madeira como combustível alternativo para a produção de vapor de água em uma caldeira aquatubular com grelha fixa do tipo PIN HOLE

The steady increase in the price of oil and its derivatives, carbon credits, the concern with the environment combined with the precipitation of rain water and lack of water resources that Brazil has suffered in 2014 caused a migration of participation sources of energy in the Brazilian energy matrix. The hydropower sector suffered big drop at 2013 and is suffering so far, contributing thus to the generation and cogeneration of thermal energy using renewable energy sources such as: sugarcane bagasse, wood chips, rice husks, among others. The selling price of the electricity market reached the level of R$ 807, 00 MWh in January 2014 (Source: ANEEL), heating the Brazilian thermoelectric sector. Although thermoelectric use in bulk water as vaporizing fluid to produce electricity and use in various processes, water reuse plans have become an important factor in these industries. The increased use of biomass has been the bagasse which is allied to the sugarcane sector, strong market in Brazil, and consists basically use the rest of sugar cane, sugarcane industries that would play out. The sugar and ethanol industry is very unstable and only lasts for 6-8 months a year, and the remaining time in the period known as between crop that corresponds to the planting and harvesting of sugarcane and then enter the period of vintage which is the constant cane harvesting and crushing it. This instability of the market and the thermoelectric idle period leads the thermoelectric industries to seek other sources of renewable energy, such as wood chips (pine, Eucalyptus, Orange), rice husk, sorghum among others, to not be dependent on alcohol sector. The present work aims to study the use of wood chips as an alternative biomass for burning a fuel that essentially uses bagasse, the thermoelectric in question consists of two boilers that produce together 350 t / h ... (Complete Abstract click electronic access below)

Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto

In this work are discussed the main types of rivets, their characteristics and applicability within the Aeronautical Industry branch. Here are highlighted the solid rivets, showing off its layout, forms and limits of installation, that are required by aviation regulators. The riveting is a popular and simple procedure of fixing and joining two or more parts, and like any other manufacturing process is subject to process deviations that in some situations are beyond the limits of tolerance. One of these deviations is when the hole diameter exceeds the one proposed in project and which is limited by the rule of edge distance. The overall objective here is to study a possible solution to this problem: the installation of a rivet that has his diameter previously increased by compression. Observe the hole filling after riveting, detect the presence of cracks, discover the yield curve of the fasteners and their the crushing limits for failure prediction are tools used to verify this proposal. They demonstrate, at the end of study, the inefficiency of this procedure, with results that go against the safe fixing of parts in a structure

Degradabilidade e digestibilidade de híbridos de milho em função do estádio de colheita, tamanho de partícula e processamento por meio do esmagamento na ensilagem

During the process of silage corn, should take into consideration some aspects that will result in better utilization. The aim of this study was to evaluate the degradability of dry matter (DM), crude protein (CP), neutral detergent fiber (NDF) and starch digestibility and in vitro dry matter (DM) of silage corn hybrids due two textures, three stages of harvest, three particle sizes and processing by crushing. After harvesting and chipping, part of the material was crushed and then ensiled and sealed for 45 days. After opening the silos, analyzed the degradability in the incubation time of 20 hours using the technique in situ macro bag. The experimental design was a randomized split plot. The DM degradability was influenced only by the effect of stages of sampling used. The degradability of CP showed interaction between processing and particle size (Tp), noting that increased degradation due to processing. For NDF degradation significant interaction of factors, hybrid and processing, similar to the degradation of starch. The IVDMD was influenced by the effects of hybrid, stadium, Tp and processing. It can be concluded that benefits were higher with the use of processing associated with more advanced stages of harvest, in larger particle sizes.

A graphical tool for the tomographic characterisation of microstructural features on metal matrix composites

Research on the micro-structural characterization of metal-matrix composites uses X-ray computed tomography to collect information about the interior features of the samples, in order to elucidate their exhibited properties. The tomographic raw data needs several steps of computational processing in order to eliminate noise and interference. Our experience with a program (Tritom) that handles these questions has shown that in some cases the processing steps take a very long time and that it is not easy for a Materials Science specialist to interact with Tritom in order to define the most adequate parameter values and the proper sequence of the available processing steps. For easing the use of Tritom, a system was built which addresses the aspects described before and that is based on the OpenDX visualization system. OpenDX visualization facilities constitute a great benefit to Tritom. The visual programming environment of OpenDX allows an easy definition of a sequence of processing steps thus fulfilling the requirement of an easy use by non-specialists on Computer Science. Also the possibility of incorporating external modules in a visual OpenDX program allows the researchers to tackle the aspect of reducing the long execution time of some processing steps. The longer processing steps of Tritom have been parallelized in two different types of hardware architectures (message-passing and shared-memory); the corresponding parallel programs can be easily incorporated in a sequence of processing steps defined in an OpenDX program. The benefits of our system are illustrated through an example where the tool is applied in the study of the sensitivity to crushing – and the implications thereof – of the reinforcements used in a functionally graded syntactic metallic foam.

Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Recolhimento mecanizado do café em função do manejo do solo e da declividade do terreno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho produtivo de novilhos nelore confinados alimentados com silagem de milho processada

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Consumo e digestibilidade total da silagem de milho processada mecanicamente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

HIGH VOLTAGE PULSED CURRENT STIMULATION OF THE SCIATIC NERVE IN RATS: ANALYSIS BY THE SFI

Objective: To analyze the efficiency of high voltage pulsed current (HVPC) with early application in three different sites, in the regeneration of the sciatic nerve in rats submitted to crush injury, the sciatic functional index (SFI) was used to assess the functional recovery. Methods: After crushing of the nerve, 57 animals were submitted to cathodal HVPC at frequency of 50Hz and voltage of 100V, 20 minutes per day, 5 days per week. The rats were divided into five groups: control group; ganglion group; ganglion + muscle group; muscle group; and sham group. The SFI was determined weekly for seven weeks, from the preoperative period to the 6th postoperative week. Results: Compared with the control group, the results showed a significantly better performance of group 2 for the first 3 weeks; group 3 showed significantly better performance in the third week; and group 4 showed a significantly negative performance during the 481 and 6th weeks. Conclusion: Early application of HVPC had a positive effect in the treatment of the spinal cord region and the sciatic nerve root ganglion with a dispersive electrode on the contralateral lumbar region or on the gastrocnemius. However, HVPC had a negative effect in the treatment with an active electrode on the gastrocnemius and a dispersive electrode on the contralateral thigh. Level of evidence II, Prospective comparative study.

Steel fiber reinforced concrete pipes: part 1: technological analysis of the mechanical behavior

This paper is the first part of an extensive work focusing the technological development of steel fiber reinforced concrete pipes (FRCP). Here is presented and discussed the experimental campaign focusing the test procedure and the mechanical behavior obtained for each of the dosages of fiber used. In the second part ("Steel fiber reinforced concrete pipes. Part 2: Numerical model to simulate the crushing test"), the aspects of FRCP numerical modeling are presented and analyzed using the same experimental results in order to be validated. This study was carried out trying to reduce some uncertainties related to FRCP performance and provide a better condition to the use of these components. In this respect, an experimental study was carried out using sewage concrete pipes in full scale as specimens. The diameter of the specimens was 600 mm, and they had a length of 2500 mm. The pipes were reinforced with traditional bars and different contents of steel fibers in order to compare their performance through the crushing test. Two test procedures were used in that sense. In the 1st Series, the diameter displacement was monitored by the use of two LVDTs positioned at both extremities of the pipes. In the 2nd Series, just one LVDT is positioned at the spigot. The results shown a more rigidity response of the pipe during tests when the displacements were measured at the enlarged section of the socket. The fiber reinforcement was very effective, especially when low level of displacement was imposed to the FRCP. At this condition, the steel fibers showed an equivalent performance to superior class pipes made with traditional reinforced. The fiber content of 40 kg/m3 provided a hardening behavior for the FRCP, and could be considered as equivalent to the critical volume in this condition.

Abrasividade pendular e a resistência mecânica das rochas

Esse trabalho emprega o método para avaliar a abrasividade proposto por Golovanevskiy e Bearman (2008). Esse método, ensaio de abrasão por impacto deslizante (Gouging Abrasion Test), é realizado em condições de alta tensão/alto impacto de desgaste. O método consiste de uma ponteira cilíndrica com uma ponta cônica de 90º, que, em trajetória pendular, atinge uma amostra de rocha com energia de impacto de 300 J e velocidade da ordem de 5,2 m/s. O Gouging Abrasion Index (Gi) é calculado como sendo a média do diâmetro da ponta cônica, após desgaste, em milímetros e o resultado é multiplicado por 10. Esse trabalho verificou a adequabilidade do Gouging Abrasion Test, para um pequeno número de amostras de rocha, que representam, qualitativamente, os principais tipos de rocha encontrados em trabalhos de corte, perfuração e britagem no Brasil, e a sua correlação com outros ensaios consagrados como a resistência à compressão, o desgaste Amsler e a dureza Knoop. Essa análise mostrou alta correlação entre Gi e a dureza Knoop (R² = 0,94), baixa correlação com o desgaste