Spatio-temporal modelling of the duration of the cotton cycle in the State Of Goiás, Brazil

The objective of this work was to develop and validate a mathematical model to estimate the duration of cotton (Gossypium hirsutum L. r. latifolium hutch) cycle in the State of Goiás, Brazil, by applying the method of growing degree-days (GD), and considering, simultaneously, its time-space variation. The model was developed as a linear combination of elevation, latitude, longitude, and Fourier series of time variation. The model parameters were adjusted by using multiple-linear regression to the observed GD accumulated with air temperature in the range of 15°C to 40°C. The minimum and maximum temperature records used to calculate the GD were obtained from 21 meteorological stations, considering data varying from 8 to 20 years of observation. The coefficient of determination, resulting from the comparison between the estimated and calculated GD along the year was 0.84. Model validation was done by comparing estimated and measured crop cycle in the period from cotton germination to the stage when 90 percent of bolls were opened in commercial crop fields. Comparative results showed that the model performed very well, as indicated by the Pearson correlation coefficient of 0.90 and Willmott agreement index of 0.94, resulting in a performance index of 0.85.

Emergence of corn according to the sowing depth of the seed and loads on press wheels

The seeding process was the operation that suffered the most changes in no-tillage system due the cover crop soil and new particle soil arrangement. The objective of this study was to verify the effects of loads applied to the wheels and adjustments of sowing depth on seedling emergence of corn in no-tillage system. The experimental design was completely randomized with a factorial arrangement 5x4, with five loads applied to the wheels and four theoretical sowing depth adjustments. The real sowing depth increased in the lower theoretical depth and decreased in the higher theoretical depth, due to the compaction loads. Regarding the time of emergence, loads applied had not influence at the greater depths. Emergence time decreased with the load increase in the lower depths. Thus, the adjustment of the compactor wheels can influence in the corn seeding process.

Comparison of metering mechanisms of corn seed

It was compared the performance of the metering mechanism of corn seeds (Zea mays) in direct seeding in an area of ​​200 ha, a property in Piraí do Sul, State of Paraná - PR, in Brazil. It was seeded 4 maize hybrids, 50 ha of each, with seeds of different sieves. The experiment was conducted in a randomized block design (RBD), with 3 treatments and 9 repetitions for each corn hybrid. The treatments were the pneumatic seed of metering mechanisms, horizontal perforated disc with and without ramp®. The plots were 40 m² and were distributed at the early, middle and late sowing. The variables analyzed in each corn hybrid were initial population, faulty spacing, multiple spacing, acceptable spacing, and yield components. As there were no significant differences in the variables, it was concluded that the quality of seeding with different systems of distribution was similar in the different sieves of distributed corn seeds.

Jatropha seed oil content and yield under different irrigation and potassium fertilization levels

The aim of this research was to evaluate the effects of different irrigation depths and potassium dosages, of Jatropha seed oil content and yield. The experimental design used was randomized blocks, in split-plots, with four replicates. The treatments were four water depths (plots) and four potassium dosages (subplots) applied through irrigation water. The water depths were applied based on the percentage of accumulated evaporation of a Class A (ECA) tank and of rainfall, as following: L0 = without irrigation, L40, L80 and L120, representing 40, 80 and 120% of the balance, respectively. The potassium dosages were K30, K60, K90 and K120 (30, 60, 90 and 120kg ha-1 of potassium, respectively). The oil extraction of samples was done through chemical extraction by organic solvent. The seeds used in this test were from the sampling of two seed productions from 2009, second year of crop production. It was possible to observe that irrigation use increased oil yield and decreased the oil content of Jatropha seed. Potassium fertilization did not influence oil content and yield. There was a relative increase of efficiency in water use producing oil until certain water depth, and after that there was a decrease.

Longitudinal distribution of bean seeds in horizontal plate meter operating with one or two seed outlets

This study aimed to evaluate the effect of horizontal plate meter with oblong holes operating with one or two seed outlets at different speeds over the accuracy of longitudinal distribution of common bean seeds (Phaseolus vulgaris L.). The experiment was performed in laboratory using the meter with one and two seed outlet points in relation to ten tangential disk plate speeds (0.03 to 0.30 m s-1). It was used a complete randomized design with four replications, summing up 80 experimental treatments. Tangential speed quantitative factor was estimated through a 2nd order polynomial regression. There was no significant difference in the behavior of the seed meter operating with one or two outlets in the metering of bean seeds in all tested speeds, with percentage of single seeds spacing over 60% in tangential speeds below of 0.24 m s-1.

Evaluation of cotton stalks destroyers

The destruction of the cotton crop residues (cotton stalks) is a mandatory procedure in Brazil for prophylactic issues, but is a subject unexplored by the research and there are few studies that deal with this issue. However, this is not encouraged in recent decades, studies aimed at developing and evaluating equipment for this purpose. The present study had the objective to evaluate six methods for mechanical destruction of cotton crop residues. Each method was defined based on the principle of operation of the active parts of the equipment, which were tested in medium texture soil and in a clayey one. The variables used to evaluate the efficiency of the equipment were the regrowth rate, the theoretical field capacity and energy demand. The equipment with convergent concave disks (DCC) and flat cutters discs from manufacturer A (CPS-a) showed the best results in cotton stalks destruction in both soil types. The harrow disc (GPD) was efficient only in clay soil. It was concluded that the equipment with convergent concave disks, among those tested, was the most efficient to destroy cotton stalks, regardless of soil type, and that the harrow disc was not included among the best performers.

Evaluation of the effect of the seed extract of Moringa oleifera Lam over the efficiency of organic filters in wastewater treatment of dairy cattle breeding

This study aimed to evaluate the effect of Moringa oleifera Lam extract on the removal of total solids (TS), total suspended solids (TSS) and chemical oxygen demand (COD), in different filter media for treating wastewater of dairy cattle breeding (DCW). The moringa seed extract was obtained by grinding 50 g of seeds in one liter of distilled water and, after passing the solution through a quantitative paper filter of 25 microns, 60 mL of the extract were added to wastewater from cattle breeding before the filtration process in organic filters made of thin coal, bamboo leaves, eucalyptus leaves, gliricidia branches and sawdust. This was followed by the completely randomized experimental design, adopting a factorial of 5 x 2. Aliquots of filtered effluent were collected and the total solids (TS) concentrations, total suspended solids (TSS) and chemical oxygen demand (COD) were determined. It was found that the increase in the efficiency of removal of COD and total solids can be attributed to the coagulating power of the moringa seed extract, wherein the filter medium with bamboo leaves presented the best performance, showing potential for use as alternative filter material in the primary treatment of DCW.

Yield of cotton/cowpea and sunflower/cowpea crop rotation systems during the reclamation process of a saline-sodic soil

The objective of this study was to evaluate the use of subsoiling, gypsum and organic matter associated with the cultivation of cotton, sunflower and cowpea in crop rotation, seeking the reclamation and use of a saline-sodic soil. The treatments were arranged in a randomized block design in split plots with four replications, during two crop cycles (2009/2010 and 2010/2011). The plots were formed by the treatments: T1. Subsoiling (S); T2. S + 20 Mg ha-1 of gypsum; T3. S + 40 Mg ha-1 of organic matter; T4. S + 10 Mg ha-1 of gypsum + 20 Mg ha-1 of organic matter; T5. S + 20 Mg ha-1 of gypsum + 40 Mg ha-1 of organic matter and the sub-plots consisted of the cotton-cowpea (C/CP) and sunflower-cowpea (S/CP) crop rotation. The use of gypsum and organic matter contributed to decrease the soil salinity and sodicity. Cotton was not affected by the treatments, while the sunflower crop was favored by the application of amendments only in the second production cycle. Higher yields of cowpea in T5 treatment, during the 2009/2010 cycle, are indicative that higher doses of gypsum and organic matter applied in this treatment accelerate the reclamation process. For other treatments with amendment application there was a beneficial effect for this crop only in the second cycle, when the values of productivity were similar to T5.

Spraying systems and traveling speed in the deposit and spectrum of droplets in cotton plant

ABSTRACT Tractor traveling speed can influence the quality of spraying depending on the application technology used. This study aimed to evaluate the droplet spectrum, the deposition and uniformity of spray distribution with different spraying systems and traveling speeds of a self-propelled sprayer in two phenological stages of the cotton plant (B9 and F13). The experimental design was randomized blocks and treatments were three spraying techniques: common flat spray tips; tilted flat jet with air induction, at 120 L ha-1; and rotary atomizer disk, 20 L ha-1, combined with four traveling speeds: 12, 15, 18 and 25 km h-1, with four replications. Spraying deposition was evaluated for both leaf surfaces from the cotton plant apex and base (stage B9) and middle part of the plant (stage F13) with a cupric marker. A laser particle analyzer also assessed the droplet spectrum. The centrifugal power spray system produces more homogeneous droplet spectrum and increased penetration of droplets into the canopy in both phenological stages. Variation on the operating conditions necessary for increased traveling speed negatively influences the pattern of spraying deposits.

Cotton Club (mainos)

Yökerhon mainoskortti. Saksankielinen

Henkilöstön kokonaisvaltainen kannustinjärjestelmä : Case: Sport-Cotton -konsernin liikunta- ja hyvinvointiliiketoiminta

Taloudellisen taantuman jälkeen yksi suurimmista puheenaiheista työväestön keskuudessa on tyytymättömyys suhteellisen pieniin yleisiin palkankorotuksiin tai jopa niiden puuttumiseen kokonaan. Vuonna 2013 ei näkyvissä ole sellaisia merkkejä talouskasvusta, että palkkoja voitaisiin merkittävästi korottaa yleisellä tasolla. Tämä seikka nostaa esille kokonaisvaltaisen kannustinjärjestelmän arvon eri organisaatioissa. Henkilöstön kokonaisvaltainen kannustinjärjestelmä on yksi väline, jolla voidaan motivoida, sitouttaa, kehittää ja johtaa nykyisen työelämän tietotyöntekijöitä taloudellisesti kannattavalla tavalla ja sitä kautta vahvistaa organisaation kilpailukykyä sekä paikallisilla että yhä globaalimmilla markkinoilla. Tämä tutkimus toteutettiin konstruktiivisena tutkimuksena tarkoituksenaan henkilöstön kokonaisvaltaisen kannustinjärjestelmän luominen toimeksiantajayrityksen, Sport-Cotton Oy:n liikunta- ja hyvinvointiliiketoiminnan, tarpeisiin. Henkilöstön kokonaisvaltaisen kannustinjärjestelmän perustana ovat organisaation sille asettamat tavoitteet. Kannustinjärjestelmälle asetetut tavoitteet ja reunaehdot määrittelevät käytettävät kannustimet, mutta kannustinjärjestelmästä tekee kokonaisvaltaisen sekä aineettomien että aineellisten kannustimien hyödyntäminen tavoitteiden saavuttamiseksi. Järjestelmä ei voi olla kiveen hakattu, sillä organisaatiot ja niiden toimintaympäristöt muuttuvat jatkuvasti. Esimerkiksi teknologisen kehityksen myötä työn luonne muuttuu ja markkinat globalisoituvat, mikä puolestaan voi merkittävästi vaikuttaa kannustinjärjestelmälle asetettuihin tavoitteisiin. Tutkimuksen mukaan henkilöstön kokonaisvaltainen kannustinjärjestelmä voidaan nähdä päivittäisen johtamisen työkaluna, joka on osa organisaation päivittäistä toimintaa. Henkilöstön osallistuminen kannustinjärjestelmän suunnitteluprosessiin on luonnollinen keino osallistaa ja sitouttaa henkilöstöä heihin vaikuttavaan uuteen asiaan ja usein sen mukanaan tuomaan muutokseen. Organisaation kannalta henkilöstön sitouttamisella prosessiin voidaan saavuttaa selkeitä hyötyjä.

Potential for seed bank formation of two weed species from Brazilian Amazonia

The potential for seed bank formation of two perennial weed species, Ipomoea asarifolia (Desr.) Roem. & Schult. (Convolvulaceae) and Stachytarpheta cayennensis (Rich.) M. Vahl (Verbenaceae), both common in Amazonia , was evaluated in a degraded pasture area in eastern Brazilian Amazonia . Seeds were enclosed in nylon mesh packets and placed at the soil surface or buried at 5 or 10 cm deep. The number of viable seeds was recorded at 6, 10, 14 and 18 months after burial. Results showed that S. cayennensis has the ability to form persistent soil seed bank, while I. asarifolia seeds do not build up in the soil seed bank. For S. cayennensis and, to some extent, for I. asarifolia, seed survival was highest at greater burial depths.

Seed longevity of red rice ecotypes buried in soil

Red rice is a troublesome weed in irrigated rice production and is spread through contaminated commercial rice seed and machinery. Seed dormancy is a major trait for red rice. Studies were carried out at two locations to determine red rice seed longevity in the soil of several ecotypes from four US states. Five months after burial near Beaumont, Texas only three ecotypes had viable seed (<1%) when buried at 5 cm, but 9 ecotypes had viable seed after two years when buried at 25 cm. At the thirty-sixth month after burial, ecotypes Arkansas 2, Louisiana 2 and 4, Mississippi 4 and Texas 1 had viable seeds, but at less than 1%. Freshly harvested red rice seeds buried at 12 cm near College Station, TX, survived longer than seeds placed on the soil surface. The percentage of maximum viable seeds was 2% for blackhull type Texas 4, after 17 months. In both studies, commercial rice cultivar seeds were not viable after 5 months, regardless of their position in the soil. Under farming conditions with no fallow land preparations or deep tillage, most red rice seed germinated or was dead after 2 to 3 years, with only minor variation among ecotypes.

Seletividade de herbicidas aplicados em pós-emergência sobre capim-colonião e efeito na qualidade das sementes: effects on seed germination

Este estudo foi conduzido para avaliar a seletividade de herbicidas aplicados em pós-emergência sobre plantas de Panicum maximum, cultivares Tanzânia e Mombaça, e os seus efeitos na qualidade das sementes. Os tratamentos testados (em g ha-1) foram: diclofopmethyl (284), ametryne (1.250), propanil (3.600), chlorimuron-ethyl (15), nicosulfuron (50), bentazon (720) e atrazine (3.000), além de uma testemunha sem aplicação de herbicidas. Foram instalados dois experimentos a campo, um para cada cultivar, no delineamento em blocos casualizados com quatro repetições, e um em laboratório, no delineamento inteiramente casualizado, com 16 repetições. O nicosulfuron foi o herbicida que mais causou injúrias visuais e redução de massa seca de plantas em ambos os cultivares. No cultivar Mombaça, todos os herbicidas reduziram a produção de sementes, mas não afetaram a germinação. Para o cultivar Tanzânia, todos os herbicidas foram seletivos, não afetando a produção e a qualidade fisiológica.