Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Geochemistry of the thermal springs and fumaroles of Basse-Terre Island, Guadeloupe, Lesser Antilles

The purpose of this work was to study jointly the volcanic-hydrothermal system of the high-risk volcano La Soufriere, in the southern part of Basse-Terre, and the geothermal area of Bouillante, on its western coast, to derive an all-embracing and coherent conceptual geochemical model that provides the necessary basis for adequate volcanic surveillance and further geothermal exploration. The active andesitic dome of La Soufriere has erupted eight times since 1660, most recently in 1976-1977. All these historic eruptions have been phreatic. High-salinity, Na-CI geothermal liquids circulate in the Bouillante geothermal reservoir, at temperatures close to 250 degrees C. These Na-CI solutions rise toward the surface, undergo boiling and mixing with groundwater and/or seawater, and feed most Na-CI thermal springs in the central Bouillante area. The Na-Cl thermal springs are surrounded by Na-HCO3 thermal springs and by the Na-Cl thermal spring of Anse a la Barque (a groundwater slightly mixed with seawater), which are all heated through conductive transfer. The two main fumarolic fields of La Soufriere area discharge vapors formed through boiling of hydrothermal aqueous solutions at temperatures of 190-215 degrees C below the ``Ty'' fault area and close to 260 degrees C below the dome summit. The boiling liquid producing the vapors of the Ty fault area has SD and delta(18)O values relatively similar to those of the Na-CI liquids of the Bouillante geothermal reservoir, whereas the liquid originating the vapors of the summit fumaroles is strongly enriched in O-18, due to input of magmatic fluids from below. This process is also responsible for the paucity of CH;I in the fumaroles. The thermal features around La Soufriere dome include: (a) Ca-SO4 springs, produced through absorption of hydrothermal vapors in shallow groundwaters; (b) conductively heated, Ca-Na-HCO3 springs; and (c) two Ca-Na-Cl springs produced through mixing of shallow Ca-SO4 waters and deep Na-Cl hydrothermal liquids. The geographical distribution of the different thermal features of La Soufriere area indicates the presence of: (a) a central zone dominated by the ascent of steam, which either discharges at the surface in the fumarolic fields or is absorbed in shallow groundwaters; and (b) an outer zone, where the shallow groundwaters are heated through conduction or addition of Na-Cl liquids coming from hydrothermal aquifer(s).

Novel action of a wake-promoting neuropeptide in hippocampus : inhibition of nmda receptor function at excitatory synapses through orexin-a

One of the most intriguing functions of the brain is the ability to learn and memorize. The mechanism through which memory and learning are expressed requires the activation of NMDA receptors (NMDARs). These molecular entities are placed at the postsynaptic density of excitatory synapses and their function is tightly controlled by the actions of several modulators at the extracellular, intracellular and pore sites. A large part of the intracellular modulation comes from the action of G-protein coupled receptors (GPCRs). Through intracellular cascades typically involving kinases and phosphatases, GPCRs potentiate or inhibit NMDARs, controlling the conductive state but also the trafficking within the synapse. The GPCRs are involved in the modulation of a variety of brain functions. Many of them control cognition, memory and learning performance, therefore, their effects on NMDARs are extensively studied. The orexinergic system signals through GPCRs and it is well known for the regulation of waking, feeding, reward and autonomic functions. Moreover, it is involved in potentiating hippocampus-related cognitive tasks. Orexin receptors and fibers are present within the hippocampus, but whether these directly modulate hippocampal cells and synapses has not yet been determined. During my thesis, I studied orexinergic actions on excitatory synaptic transmission via whole-cell patch-clamp recordings in rat acute hippocampal slices. I observed that exogenously applied orexin-A (ox-A) exerted a strong inhibitory action on NMDAR-mediated synaptic potentials at mossy fiber (MF)-CA3 synapses, by postsynaptically activating orexin-2 receptors, a minor inhibition at Schaffer collateral-CAl synapses and did not affect other synapses with the CA3 area. Moreover, I demonstrated that the susceptibility of NMDARs to ox- A depends on the tone of endogenous orexin known to fluctuate during the day-night cycle. In fact, in slices prepared during the active period of the rats, when endogenous orexin levels are high, NMDAR-currents were not affected by exogenously applied ox-A. The inhibitory effect of ox-A was, however, reverted when interfering with the orexinergic system through intraperitoneal injections of almorexant, a dual orexin receptor antagonist, during the active phase prior to slice preparation. This thesis work suggests that the orexinergic system regulates NMDAR-dependent information flow through select hippocampal pathways depending on the time-of-day. The specific orexinergic modulation of NMDARs at MFs dampens the excitability of the hippocampal circuit and could impede the mechanisms related to memory formation, possibly also following extended periods of waking. -- La capacité d'apprentissage et de mémorisation est une des fonctions les plus intrigantes de notre cerveau. Il a été montré qu'elles requièrent l'activation des récepteurs NMDA (NMDARs). Ces entités moléculaires sont présentes au niveau de la densité post-synaptique des synapses excitatrices et leur fonction est étroitement contrôlée par l'action de nombreux modulateurs au niveau extracellulaire, intracellulaire et membranaire de ces récepteurs. Une grande partie de la modulation intracellulaire s'effectue via l'action de récepteurs couplés aux protéines G (GPCRs). Grace à leurs cascades intracellulaires typiquement impliquant des kinases et des phosphatases, les GPCRs favorisent l'activation ou l'inhibition des NMDARs, contrôlant ainsi leur perméabilité mais aussi leur mouvement à la synapse. Les GPCRs sont impliquées dans de nombreuses fonctions cérébrales telles que la cognition, la mémoire ainsi que la capacité d'apprentissage c'est pour cela que leurs effets sur les NMDARs sont très étudiés. Le système orexinergique fait intervenir ces GPCRs et est connu par son rôle dans la régulation de fonctions physiologiques telles que l'éveil, la prise alimentaire, la récompense ainsi que d'autres fonctions du système nerveux autonome. De plus, ce système est impliqué dans la régulation de tâches cognitives liées à l'hippocampe. Bien que les fibres et les récepteurs à l'orexine soient présents dans l'hippocampe, leur mécanisme d'action sur les cellules et les synapses de l'hippocampe n'a pas encore été élucidé. Durant ma thèse, je me suis intéressée aux effets de l'orexine sur la transmission synaptique excitatrice en utilisant la méthode d'enregistrement en patch-clamp en configuration cellule entière sur des tranches aiguës d'hippocampes de rats. J'ai observé que l'application exogène d'orexine A d'une part inhibe fortement les courants synaptiques dépendants de l'activation des NMDARs au niveau de la synapse entre les fibres moussues et CA3 via l'activation post-synaptique des orexine récepteurs 2 mais d'autre part n'inhibe que de façon mineure la synapse entre les collatérales de Schaffer et CAI et n'affecte pas les autres synapses impliquant CA3. J'ai également démontré que la sensibilité des NMDARs à l'orexine A dépend de sa concentration endogène qui fluctue durant le cycle éveil-sommeil. En effet, lorsque les coupes d'hippocampes sont préparées durant la période active de l'animal correspondant à un niveau endogène d'orexine élevé, l'application exogène d'orexine A n'a aucun effet sur les courants dépendants de l'activation des NMDARs. Cependant, l'injection dans le péritoine, durant la phase active de l'animal, d'un antagoniste des orexine récepteurs, l'almorexant, va supprimer l'effet inhibiteur de l'orexine A. Les résultats de ma thèse suggèrent donc que le système orexinergique module les informations véhiculées par les NMDARs via des voies de signalisation sélectives de l'hippocampe en fonction du moment de la journée. La modulation orexinergique des NMDARs au niveau des fibres moussues diminue ainsi l'excitabilité du circuit hippocampal et pourrait entraver les mécanismes liés à la formation de la mémoire, potentiellement après de longues périodes d'éveil.

Constraining 3-D electrical resistance tomography with GPR reflection data forimproved aquifer characterization

Surface-based ground penetrating radar (GPR) and electrical resistance tomography (ERT) are common tools for aquifer characterization, because both methods provide data that are sensitive to hydrogeologically relevant quantities. To retrieve bulk subsurface properties at high resolution, we suggest incorporating structural information derived from GPR reflection data when inverting surface ERT data. This reduces resolution limitations, which might hinder quantitative interpretations. Surface-based GPR reflection and ERT data have been recorded on an exposed gravel bar within a restored section of a previously channelized river in northeastern Switzerland to characterize an underlying gravel aquifer. The GPR reflection data acquired over an area of 240×40 m map the aquifer's thickness and two internal sub-horizontal regions with different depositional patterns. The interface between these two regions and the boundary of the aquifer with then underlying clay are incorporated in an unstructured ERT mesh. Subsequent inversions are performed without applying smoothness constraints across these boundaries. Inversion models obtained by using these structural constraints contain subtle resistivity variations within the aquifer that are hardly visible in standard inversion models as a result of strong vertical smearing in the latter. In the upper aquifer region, with high GPR coherency and horizontal layering, the resistivity is moderately high (N300 Ωm). We suggest that this region consists of sediments that were rearranged during more than a century of channelized flow. In the lower low coherency region, the GPR image reveals fluvial features (e.g., foresets) and generally more heterogeneous deposits. In this region, the resistivity is lower (~200 Ωm), which we attribute to increased amounts of fines in some of the well-sorted fluvial deposits. We also find elongated conductive anomalies that correspond to the location of river embankments that were removed in 2002.

Low latitude Paleocene to early Eocene radiolarian systematics, biochronology and paleoenvironmental analysis

Highly diverse radiolarian faunas of latest Maastrichtian to early Eocene age have been recovered from the low latitude realm in order to contribute to the clarification of radiolarian taxonomy, construct a zonation based on a discrete sequence of co-existence intervals of species ranging from the late Paleocene to early Eocene and to describe a rich low latitude latest Cretaceous to late Paleocene fauna. 225 samples of late Paleocene to early Eocene age have been collected from ODP Leg 171 B-Hole 1051 A (Blake Nose), DSDP Leg 43-Site 384 (Northwest Atlantic) and DSDP Leg 10-Sites 86, 94, 95, 96. Sequences consist of mainly pelagic oozes and chalks, with some clay and ash layers. A new imaging technique is devised to perform (in particular on topotypic material) both transmitted light microscopy and SEM imaging on individual radiolarian specimens. SEM precedes transmitted light imaging. Radiolarians are adhered to a cover slip (using nail varnish) which is secured to a stub using conductive levers. Specimens are then photographed in low vacuum (40-50Pa; 0.5mbar), which enables charge neutralization by ionized molecules of the chamber atmosphere. Thus gold coating is avoided and subsequently this allows transmitted light imaging to follow. The conductive levers are unscrewed and the cover slip is simply overturned and mounted with Canada balsam. In an attempt towards a post-Haeckelian classification, the initial spicule (Entactinaria), micro- or macrosphere (Spumellaria) and initial spicule and cephalis (Nassellaria) have been studied by slicing Entactinaria and Spumellaria, and by tilting Nassellaria in the SEM chamber. A new genus of the family Coccodiscidae is erected and Spongatractus HAECKEL is re-located to the subfamily Axopruinae. The biochronology has been carried out using the Unitary Association Method (Guex 1977, 1991). A database recording the occurrences of 112 species has been used to establish a succession of 22 Unitary Associations. Each association is correlated to chronostratigraphy via calcareous microfossils that were previously studied by other authors. The 22 UAs have been united into seven Unitary Associations Zones (UAZones) (JP10- JE4). The established zones permit to distinguish supplementary subdivisions within the existing zonation. The low-latitude Paleocene radiolarian zonation established by Sanfilippo and Nigrini (1998a) is incomplete due to the lack of radiolarian-bearing early Paleocene sediments. In order to contribute to the study of sparsely known low latitude early Paleocene faunas, 80 samples were taken from the highly siliceous Guayaquil Formation (Ecuador). The sequence consists of black cherts, shales, siliceous limestones and volcanic ash layers. The carbonate content increases up section. Age control is supplied by sporadic occurrences of silicified planktonic foraminifera casts. One Cretaceous zone and seven Paleocene zones have been identified. The existing zonation for the South Pacific can be applied to the early-early late Paleocene sequence, although certain marker species have significantly shorter ranges (notably Buryella foremanae and B. granulata). Despite missing marker species in the late Paleocene, faunal distribution correlates reasonably to the Low-Latitude zonation. An assemblage highly abundant in Lithomelissa, Lophophaena and Cycladophora in the upper RP6 zone (correlated by the presence of Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus and Stylotrochus nitidus) shows a close affinity to contemporaneous faunas reported from Site 1121, Campbell Plateau. Coupled with a high diatom abundance (notably Aulacodiscus spp. and Arachnoidiscus spp.), these faunas are interpreted as reflecting a period of enhanced biosiliceous productivity during the late Paleocene. The youngest sample is void of radiolarians, diatoms and sponge spicules yet contains many pyritized infaunal benthic foraminifera which are akin to the midway-type fauna. The presence of this fauna suggests deposition in a neritic environment. This is in contrast to the inferred bathyal slope depositional environment of the older Paleocene sediments and suggests a shoaling of the depositional environment which may be related to a coeval major accretionary event. RESUME DE LA THESE Des faunes de radiolaires de basses latitudes très diversifiées d'âge Maastrichtien terminal à Eocène inférieur, ont été étudiées afin de contribuer à la clarification de leur taxonomie, de construire une biozonation basée sur une séquence discrète d'intervalles de coexistence des espèces d'age Paléocène supérieur à Eocène inférieur et de décrire une riche faune de basse latitude allant du Crétacé terminal au Paléocène supérieur. L'étude de cette faune contribue particulièrement à la connaissance des insaisissables radiolaires de basses latitudes du Paléocène inférieur. 225 échantillons d'âge Paléocène supérieur à Eocène inférieur provenant des ODP Leg 171B-Site 1051A (Blake Nose), Leg DSDP 43-Site 384 (Atlantique Nord -Ouest) et des DSDP Leg 10 -Sites 86, 94, 95, 96, ont été étudiés. Ces séquences sont constituées principalement de « ooze » et de « chalks »pélagiques ainsi que de quelques niveaux de cendres et d'argiles. Une nouvelle technique d'imagerie a été conçue afin de pouvoir prendre conjointement des images en lumière transmise et au Microscope Electronique à Balayage (MEB) de spécimens individuels. Ceci à été particulièrement appliqué à l'étude des topotypes. L'imagerie MEB précède l'imagerie en lumière transmise. Les radiolaires sont collés sur une lame pour micropaléontologie (au moyen de vernis à ongles) qui est ensuite fixée à un porte-objet à l'aide de bras métalliques conducteurs. Les spécimens sont ensuite photographiés en vide partiel (40-50Pa; 0.5mbar), ce qui permet la neutralisation des charges électrostatiques dues à la présence de molécules ionisées dans l'atmosphère de la chambre d'observation. Ainsi la métallisation de l'échantillon avec de l'or n'est plus nécessaire et ceci permet l'observation ultérieure en lumière transmise. Les bras conducteurs sont ensuite dévissés et la lame est simplement retournée et immergée dans du baume du Canada. Dans une approche de classification post Haeckelienne, le spicule initial (Entactinaires), la micro- ou macro -sphère (Spumellaires) et le spicule initial et cephalis (Nassellaires) ont été étudiés. Ceci a nécessité le sectionnement d'Entactinaires et de Spumellaires, et de pivoter les Nassellaires dans la chambre d'observation du MEB. Un nouveau genre de la Famille des Coccodiscidae a été érigé et Spongatractus HAECKEL à été réassigné à la sous-famille des Axopruninae. L'analyse biostratigraphique à été effectuée à l'aide de la méthode des Associations Unitaires {Guex 1977, 1991). Une base de données enregistrant les présences de 112 espèces à été utilisée poux établir une succession de 22 Associations Unitaires. Chaque association est corrélée à la chronostratigraphie au moyen de microfossiles calcaires précédemment étudiés par d'autres auteurs. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (UAZones) (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. La zonation de basses latitudes du Paléocène établie par Sanfilippo et Nigrini (1998a) est incomplète due au manque de sédiments du Paléocène inférieur contenant des radiolaires. Afin de contribuer à l'étude des faunes peu connues des basses latitudes du Paléocène inférieur, 80 échantillons ont été prélevés d'une section siliceuse de la Formation de Guayaquil (Equateur). La séquence est composée de cherts noirs, de shales, de calcaires siliceux et de couches de cendres volcaniques. La fraction carbonatée augmente vers le haut de la section. Des contraintes chronologiques sont fournies par la présence sporadique de moules de foraminifères planctoniques. Une zone d'intervalles du Crétacé et sept du Paléocène ont été mises en évidence. Bien que certaines espèces marqueur ont des distributions remarquablement plus courtes (notamment Buryella foremanae et B. granulata), la zonation existante pour le Pacifique Sud est applicable à la séquence d'age Paléocène inférieure à Paléocène supérieur basal étudiée. Malgré l'absence d'espèces marqueur du Paléocène supérieur, la succession faunistique se corrèle raisonnablement avec la zonation pour les basses latitudes. Un assemblage contenant d'abondants représentant du genre Lithomelissa, Lophophaena et Cycladophora dans la zone RP6 (correlée par la présence de Pterocodon poculum, Circodiscus circularis, Pterocodon? sp. aff. P. tenellus et Stylotrochus nitidus) montre une grande similitude avec certaines faunes issues des hauts latitudes et d'age semblable décrites par Hollis (2002, Site 1121, Campbell Plateau). Ceci, en plus d'une abondance importante en diatomés (notamment Aulacodiscus spp. et Arachnoidiscus spp.) nous mènent à interpréter cette faune comme témoin d'un épisode de productivité biosiliceuse accrue dans le Paléocène supérieur. L'échantillon le plus jeune, dépourvu de radiolaires, de diatomés et de spicules d'éponge contient de nombreux foraminifères benthiques infaunaux pyritisés. Les espèces identifiées sont caractéristiques d'une faune de type midway. La présence de ces foraminifères suggère un environnement de type néritique. Ceci est en contraste avec l'environnement de pente bathyale caractérisent les sédiments sous-jacent. Cette séquence de diminution de la tranche d'eau peut être associée à un événement d'accrétion majeure. RESUME DE LA THESE (POUR LE GRAND PUBLIC) Les radiolaires constituent le groupe de plancton marin le plus divers et le plus largement répandu de l'enregistrement fossile. Un taux d'évolution rapide et une variation géographique considérable des populations font des radiolaires un outil de recherche sans égal pour la biostratigraphie et la paléocéanographie. Néanmoins, avant de pouvoir les utiliser comme outils de travail, il est essentiel d'établir une solide base taxonomique. L'étude des Radiolaires peut impliquer plusieurs techniques d'extraction, d'observation et d'imagerie qui sont dépendantes du degré d'altération diagénétique des spécimens. Le squelette initial, qu'il s'agisse d'un spicule initial (Entactinaria), d'une micro- ou macro -sphère (Spumellaria) ou d'un spicule initial et d'un cephalis (Nassellaria), est l'élément le plus constant au cours de l'évolution et devrait représenter le fondement de la systématique. Des échantillons provenant de carottes de basses latitudes du Deep Sea Drilling Project et de l' Ocean Drilling ont été étudiés. De nouvelles techniques d'imagerie et de sectionnement ont été développées sur des topotypes de radiolaires préservés en opale, dans le but d'étudier les caractéristiques de leur squelette initial qui n'étaient pas visibles dans leur illustration originale. Ceci aide entre autre à comparer des spécimens recristallisés en quartz, provenant de terrains accrétés, avec les holotypes en opale de la littérature. La distribution des espèces étudiés a fourni des données biostratigraphiques qui ont été compilées à l'aide de la méthode des Associations Unitaires (Guez 1977, 1991). Il s'agit d'un modèle mathématique déterministe conçu pour exploiter la totalité de l'assemblage plutôt que de se confiner à l'utilisation de taxons marqueurs individuels. Une séquence de 22 Associations Unitaires a été établie pour la période allant du Paléocène supérieur à l'Éocène inférieur. Chaque Association Unitaire a été corrélée à l'échelle de temps absolue à l'aide de microfossiles calcaires. Les 22 UAs ont été combinées en sept Zones d'Associations Unitaires (JP10- JE4). Ces Zones permettent d'insérer des subdivisions supplémentaires dans la zonation actuelle. Les radiolaires du Paléocène inférieur à moyen des basses latitudes sont rares. Les meilleures sections connues se trouvent dans les hautes latitudes (Nouvelle Zélande). Quelques assemblages épars ont été mentionnés par le passé en Californie, en Équateur et en Russie. Une séquence siliceuse de 190 mètres dans la Formation de Guayaquil (Équateur), s'étendant du Maastrichtien supérieur au Paléocène supérieur, a fourni des faunes relativement bien préservées. L'étude de ces faunes a permis de mettre en évidence la première séquence complète de radiolaires de basses latitudes dans le Paléocène inférieure. Huit zones allant du Crétacé terminal au Paléocène supérieur ont pu être appliqués et la présence de foraminifères planctoniques a fournie plusieurs points d'attache chronologiques. Dans le Paléocène supérieur, un riche assemblage contenant d'abondants diatomés et radiolaires ayant des similitudes faunistiques marquantes avec des assemblages de hautes latitudes de Nouvelle Zélande, témoigne d'un épisode de productivité biosiliceuse accrue pendant cette période. Étant donné que la pointe du continent sud-américain et l'Antarctique étaient plus proches au cours du Paléocène, ce phénomène peut être expliqué par le transport, le long de la côte ouest de l'Amérique du Sud, d'eaux riches en nutriments en provenance de l'Océan Antarctique. Suite à cet épisode, l'enregistrement en radiolaires est interrompu. Ceci peut être associé à des événements tectoniques régionaux qui ont eu pour effet de diminuer la tranche d'eau relative, rendant l'environnement plus favorable aux foraminifères benthiques qui sont abondamment présents dans l'échantillon le plus jeune de la séquence.

Compositional influence on the electrical performance of zinc indium tin oxide transparent thin-film transistors

In this work, zinc indium tin oxide layers with different compositions are used as the active layer of thin film transistors. This multicomponent transparent conductive oxide is gaining great interest due to its reduced content of the scarce indium element. Experimental data indicate that the incorporation of zinc promotes the creation of oxygen vacancies. In thin-film transistors this effect leads to a higher threshold voltage values. The field-effect mobility is also strongly degraded, probably due to coulomb scattering by ionized defects. A post deposition annealing in air reduces the density of oxygen vacancies and improves the fieldeffect mobility by orders of magnitude. Finally, the electrical characteristics of the fabricated thin-film transistors have been analyzed to estimate the density of states in the gap of the active layers. These measurements reveal a clear peak located at 0.3 eV from the conduction band edge that could be attributed to oxygen vacancies.

Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H

Lasers are essential tools for cell isolation and monolithic interconnection in thin-film-silicon photovoltaic technologies. Laser ablation of transparent conductive oxides (TCOs), amorphous silicon structures and back contact removal are standard processes in industry for monolithic device interconnection. However, material ablation with minimum debris and small heat affected zone is one of the main difficulty is to achieve, to reduce costs and to improve device efficiency. In this paper we present recent results in laser ablation of photovoltaic materials using excimer and UV wavelengths of diode-pumped solid-state (DPSS) laser sources. We discuss results concerning UV ablation of different TCO and thin-film silicon (a-Si:H and nc-Si:H), focussing our study on ablation threshold measurements and process-quality assessment using advanced optical microscopy techniques. In that way we show the advantages of using UV wavelengths for minimizing the characteristic material thermal affection of laser irradiation in the ns regime at higher wavelengths. Additionally we include preliminary results of selective ablation of film on film structures irradiating from the film side (direct writing configuration) including the problem of selective ablation of ZnO films on a-Si:H layers. In that way we demonstrate the potential use of UV wavelengths of fully commercial laser sources as an alternative to standard backscribing process in device fabrication.

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Voltage fluctuations in IC power supply distribution

The supply voltage decrease and powerconsumption increase of modern ICs made the requirements for low voltage fluctuation caused by packaging and on-chip parasitic impedances more difficult to achieve. Most of the research works on the area assume that all the nodes of the chip are fed at thesame voltage, in such a way that the main cause of disturbance or fluctuation is the parasitic impedance of packaging. In the paper an approach to analyze the effect of high and fast current demands on the on-chip power supply network. First an approach to model the entire network by considering a homogeneous conductive foil is presented. The modification of the timing parameters of flipflops caused by spatial voltage drops through the IC surface are also investigated.

Differentiation of blue ballpoint pen inks by positive and negative mode LDI-MS

Usually, the differentiation of inks on questioned documents is carried out by optical methods and thin layer chromatography (TLC). Therefore, spectrometric methods were also proposed in forensic literature for the analysis of dyes. Between these techniques, laser desorption/ionization mass spectrometry (LDI-MS) has demonstrated a great versatility thanks to its sensitivity to blue ballpoint ink dyes and minimal sample destruction. Previous researches concentrated mostly on the LDI-MS positive mode and have shown that this analytical tool offers higher discrimination power than high performance TLC (HPTLC) for the differentiation of blue ballpoint inks. Although LDI-MS negative mode has already been applied in numerous forensic domains like the studies of works of art, automotive paints or rollerball pens, its potential for the discrimination of ballpoint pens was never studied before. The aim of the present paper is therefore to evaluate its potential for the discrimination of blue ballpoint inks. After optimization of the method, ink entries from 33 blue ballpoint pens were analyzed directly on paper in both positive and negative modes by LDI-MS. Several cationic and anionic ink components were identified in inks; therefore, pens were classified and compared according to their formulations. Results show that additional information provided by anionic dyes and pigments significantly increases the discrimination power of positive mode. In fact, it was demonstrated that classifications obtained by the two modes were, to some extent, complementary (i.e., inks with specific cationic dyes not necessarily contained the same anionic components).

The use of branched ketenedimers in solving the deposit problems related to the internal sizing of uncoated fine paper

Alkyl ketene dimers (AKD) are effective and highly hydrophobic sizing agents for the internal sizing of alkaline papers, but in some cases they may form deposits on paper machines and copiers. In addition, alkenyl succinic anhydrides (ASA)- based sizing agents are highly reactive, producing on-machine sizing, but under uncontrolled wet end conditions the hydrolysis of ASA may cause problems. This thesis aims at developing an improved ketene dimer based sizing agent that would have a lower deposit formation tendency on paper machines and copiers than a traditional type of AKD. The aim is also to improve the ink jet printability of a AKD sized paper. The sizing characteristics ofketene dimers have been compared to those of ASA. A lower tendency of ketene dimer deposit formation was shown in paper machine trials and in printability tests when branched fatty acids were used in the manufacture of a ketene dimer basedsizing agent. Fitting the melting and solidification temperature of a ketene dimer size to the process temperature of a paper machine or a copier contributes to machine cleanliness. A lower hydrophobicity of the paper sized with branched ketene dimer compared to the paper sized with traditional AKD was discovered. However, the ink jet print quality could be improved by the use of a branched ketene dimer. The branched ketene dimer helps in balancing the paper hydrophobicity for both black and color printing. The use of a high amount of protective colloidin the emulsification was considered to be useful for the sizing performance ofthe liquid type of sizing agents. Similar findings were indicated for both the branched ketene dimer and ASA.