Policewoman walks past demonstrating policemen's wives who are against policewomen riding in radio cars with policemen

General note: Title and date provided by Bettye Lane.

Les stratégies syndicales face aux restructurations d’entreprises : une étude comparative des contre-pouvoirs syndicaux dans le secteur des équipementiers automobiles en France et au Canada

Cette thèse tente de comprendre l’impact des restructurations des entreprises multinationales sur les stratégies syndicales. Les acteurs syndicaux locaux sont-ils déterminés par l’appartenance à des régimes nationaux et à des contingences organisationnelles ou peuvent-ils influencer des décisions objectives comme les restructurations ? Cette recherche s’insère dans une problématique large qui fait la jonction entre la mondialisation économique sur une base continentale, la réorganisation productive des entreprises multinationales et l’action syndicale. Au plan théorique, nous confrontons trois grandes approches analytiques, à savoir : le néo-institutionnalisme et les structures d’opportunités ; l’économie politique critique et la question du pouvoir syndical ; la géographie économique critique mettant de l’avant les contingences, l’encastrement et l’espace concurrentiel. Sur la base de ces trois familles, nous présentons un modèle d’analyse multidisciplinaire. Au plan méthodologique, cette thèse est structurée autour de quatre études de cas locales qui ont subi des menaces de restructurations. Cette collecte a été effectuée dans deux pays (la France et le Canada) et dans un secteur particulier (les équipementiers automobiles). Trois sources qualitatives forment le cœur empirique de cette thèse : des statistiques descriptives, des documents de sources secondaires et des entretiens semi-dirigés (44), principalement avec des acteurs syndicaux. L’analyse intra et inter régime national éclaire plusieurs aspects de la question des stratégies syndicales en contexte de restructurations. Les principales contributions de cette thèse touchent : 1. l’impact des facteurs relationnels et des ressources de pouvoir développées par les syndicats locaux sur les structures d’opportunités institutionnelles; 2. l’importance des aspects « cognitifs » et d’envisager le pouvoir de manière multi-niveaux; 3. l’importance de l’encastrement social et des dynamiques relationnelles entre syndicats et patronats; 4. l’influence de la concurrence internationale/nationale/régionale/locale dans le secteur des équipementiers automobiles; et 5. l’importance des arbitrages et des relations entre les acteurs de l’entreprise par rapport à la théorie de la contingence pour comprendre les marges structurelles des syndicats locaux. Notre recherche invite les acteurs sociaux à repenser leur action dans le cadre des restructurations. En particulier, les syndicats locaux se doivent d’explorer de nouveaux répertoires stratégiques pour répondre aux nombreux défis que posent le changement économique et les restructurations.

Influence of information about trip time variability, personal benefits, and environmental harm from cars versus public transportation on the choice of transportation mode

The influence of information about trip time variability, personal benefits, or environmental harm from cars or public transportation on commuting mode choice (car or subway) is examined in an experimental study. In addition to these experimentally manipulated variables, the influence of prior attitudes towards the subway was verified. The sample is made up of habitual users of the car to travel to work (N = 220, age M = 37.4, SD = 8.1, 63.2% women). The results show that providing information about the advantages of public transportation, as well as prior attitudes towards the subway, decrease the preference, choice, and perceived control of car use. Of the experimentally manipulated variables, information about the variability of trip time had the greatest influence. These results highlight the importance of taking into account these variables to implement institutional campaigns to reduce car use as transportation mode.

Areal rainfall estimation using moving cars - computer experiments including hydrological modeling

The need for high temporal and spatial resolution precipitation data for hydrological analyses has been discussed in several studies. Although rain gauges provide valuable information, a very dense rain gauge network is costly. As a result, several new ideas have been emerged to help estimating areal rainfall with higher temporal and spatial resolution. Rabiei et al. (2013) observed that moving cars, called RainCars (RCs), can potentially be a new source of data for measuring rainfall amounts. The optical sensors used in that study are designed for operating the windscreen wipers and showed promising results for rainfall measurement purposes. Their measurement accuracy has been quantified in laboratory experiments. Considering explicitly those errors, the main objective of this study is to investigate the benefit of using RCs for estimating areal rainfall. For that, computer experiments are carried out, where radar rainfall is considered as the reference and the other sources of data, i.e. RCs and rain gauges, are extracted from radar data. Comparing the quality of areal rainfall estimation by RCs with rain gauges and reference data helps to investigate the benefit of the RCs. The value of this additional source of data is not only assessed for areal rainfall estimation performance, but also for use in hydrological modeling. The results show that the RCs considering measurement errors derived from laboratory experiments provide useful additional information for areal rainfall estimation as well as for hydrological modeling. Even assuming higher uncertainties for RCs as obtained from the laboratory up to a certain level is observed practical.

Les stratégies syndicales face aux restructurations d’entreprises : une étude comparative des contre-pouvoirs syndicaux dans le secteur des équipementiers automobiles en France et au Canada

Cette thèse tente de comprendre l’impact des restructurations des entreprises multinationales sur les stratégies syndicales. Les acteurs syndicaux locaux sont-ils déterminés par l’appartenance à des régimes nationaux et à des contingences organisationnelles ou peuvent-ils influencer des décisions objectives comme les restructurations ? Cette recherche s’insère dans une problématique large qui fait la jonction entre la mondialisation économique sur une base continentale, la réorganisation productive des entreprises multinationales et l’action syndicale. Au plan théorique, nous confrontons trois grandes approches analytiques, à savoir : le néo-institutionnalisme et les structures d’opportunités ; l’économie politique critique et la question du pouvoir syndical ; la géographie économique critique mettant de l’avant les contingences, l’encastrement et l’espace concurrentiel. Sur la base de ces trois familles, nous présentons un modèle d’analyse multidisciplinaire. Au plan méthodologique, cette thèse est structurée autour de quatre études de cas locales qui ont subi des menaces de restructurations. Cette collecte a été effectuée dans deux pays (la France et le Canada) et dans un secteur particulier (les équipementiers automobiles). Trois sources qualitatives forment le cœur empirique de cette thèse : des statistiques descriptives, des documents de sources secondaires et des entretiens semi-dirigés (44), principalement avec des acteurs syndicaux. L’analyse intra et inter régime national éclaire plusieurs aspects de la question des stratégies syndicales en contexte de restructurations. Les principales contributions de cette thèse touchent : 1. l’impact des facteurs relationnels et des ressources de pouvoir développées par les syndicats locaux sur les structures d’opportunités institutionnelles; 2. l’importance des aspects « cognitifs » et d’envisager le pouvoir de manière multi-niveaux; 3. l’importance de l’encastrement social et des dynamiques relationnelles entre syndicats et patronats; 4. l’influence de la concurrence internationale/nationale/régionale/locale dans le secteur des équipementiers automobiles; et 5. l’importance des arbitrages et des relations entre les acteurs de l’entreprise par rapport à la théorie de la contingence pour comprendre les marges structurelles des syndicats locaux. Notre recherche invite les acteurs sociaux à repenser leur action dans le cadre des restructurations. En particulier, les syndicats locaux se doivent d’explorer de nouveaux répertoires stratégiques pour répondre aux nombreux défis que posent le changement économique et les restructurations.

Boom cars

En este artículo se discutitrá el problema de contaminación ambiental por ruido producida por los Boom Cars, automóviles equipados con equipos de audio externos.

Quantification of motor vehicle emission factors from on road measurements

Assessment and prediction of the impact of vehicular traffic emissions on air quality and exposure levels requires knowledge of vehicle emission factors. The aim of this study was quantification of emission factors from an on road, over twelve months measurement program conducted at two sites in Brisbane: 1) freeway type (free flowing traffic at about 100 km/h, fleet dominated by small passenger cars - Tora St); and 2) urban busy road with stop/start traffic mode, fleet comprising a significant fraction of heavy duty vehicles - Ipswich Rd. A physical model linking concentrations measured at the road for specific meteorological conditions with motor vehicle emission factors was applied for data analyses. The focus of the study was on submicrometer particles; however the measurements also included supermicrometer particles, PM2.5, carbon monoxide, sulfur dioxide, oxides of nitrogen. The results of the study are summarised in this paper. In particular, the emission factors for submicrometer particles were 6.08 x 1013 and 5.15 x 1013 particles per vehicle-1 km-1 for Tora St and Ipswich Rd respectively and for supermicrometer particles for Tora St, 1.48 x 109 particles per vehicle-1 km-1. Emission factors of diesel vehicles at both sites were about an order of magnitude higher than emissions from gasoline powered vehicles. For submicrometer particles and gasoline vehicles the emission factors were 6.08 x 1013 and 4.34 x 1013 particles per vehicle-1 km-1 for Tora St and Ipswich Rd, respectively, and for diesel vehicles were 5.35 x 1014 and 2.03 x 1014 particles per vehicle-1 km-1 for Tora St and Ipswich Rd, respectively. For supermicrometer particles at Tora St the emission factors were 2.59 x 109 and 1.53 x 1012 particles per vehicle-1 km-1, for gasoline and diesel vehicles, respectively.

Sustainable Australia : containing travel in master planned estates

Low density suburban development and excessive use of automobiles are associated with serious urban and environmental problems. These problems include traffic congestion, longer commuting times, high automobile dependency, air and water pollution, and increased depletion of natural resources. Master planned development suggests itself as a possible palliative for the ills of low density and high travel. The following study examines the patterns and dynamics of movement in a selection of master planned estates in Australia. The study develops new approaches for assessing the containment of travel within planned development. Its key aim is to clarify and map the relationships between trip generation and urban form and structure. The initial conceptual framework of the paper is developed in a review of literature related to urban form and travel behaviour. These concepts are tested empirically in a pilot study of suburban travel activity in master planned estates. A geographical information systems methodology is used to determine regional journey-to-work patterns and travel containment rates. Factors that influence selfcontainment patterns are estimated with a regression model. This research is a useful preliminary examination of travel self-containment in Australian master planned estates.

Research Monograph : Sustainable Australia : Containing travel in master planned estates

Low density suburban development and excessive use of automobiles are associated with serious urban and environmental problems. These problems include traffic congestion, longer commuting times, high automobile dependency, air and water pollution, and increased depletion of natural resources. Master planned development suggests itself as a possible palliative for the ills of low density and high travel. The following study examines the patterns and dynamics of movement in a selection of master planned estates in Australia. The study develops new approaches for assessing the containment of travel within planned development. Its key aim is to clarify and map the relationships between trip generation and urban form and structure. The initial conceptual framework of the report is developed in a review of literature related to urban form and travel behaviour. These concepts are tested empirically in a pilot study of suburban travel activity in master planned estates. A geographical information systems (GIS) methodology is used to determine regional journey-to-work patterns and travel containment rates. Factors that influence self-containment patterns are estimated with a regression model. The key research findings of the pilot study are: - There is a strong relation between urban structural form and patterns of trip generation; - The travel self-containment of Australian master planned estates is lower than the scholarly literature implies would occur if appropriate planning principles to achieve sustainable urban travel were followed; - Proximity to the central business district, income level and education status are positively correlated with travel containment; - Master planned estates depend more on local and regional centres for employment than on the central business district; - The service sector is the major employer in and around master planned estates. It tends to provide part-time and casual employment rather than full-time employment; - Travel self-containment is negative correlated with car dependency. Master planned estates with less car dependent residents, and with good access to public transport, appear to be more self-contained and, consequently, more sustainable than the norm. This research is a useful preliminary examination of travel self-containment in Australian master planned estates. It by no means exhausts the subject. In future research we hope to further assess sustainable travel patterns with more detailed spatial analysis.

Increase in particle number emissions from motor vehicles due to interruption of steady traffic flow

We assess the increase in particle number emissions from motor vehicles driving at steady speed when forced to stop and accelerate from rest. Considering the example of a signalized pedestrian crossing on a two-way single-lane urban road, we use a complex line source method to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses and show that the total emissions during a red light is significantly higher than during the time when the light remains green. Replacing two cars with one bus increased the emissions by over an order of magnitude. Considering these large differences, we conclude that the importance attached to particle number emissions in traffic management policies be reassessed in the future.

The influence of MTV

MTV has had a key impact on advertising, not only from the point of view that commercials are aired during its programmes, but also because videos themselves can be viewed as advertisements. Music videos came about as a result of the music industry being in a recession during the early eighties. Initially MTV’s incentive to develop music television was advertiser led (Goodwin, 1992, p.38). One needs to remember that television is in the business to make money - not to entertain (Allen, 1992); and that viewers are in effect sold to the advertisers (White, 1992), and MTV is an influential media forces on their targets audience of between the ages twelve and thirty-four, with a median age of twenty-three (Englis et al., 1994). The reason why MTV is such an effective advertising medium, is that it utilises music, mood, visual elements, popular culture and the socialising effect of television, to sell its message in a susceptible/ passive manner. Its primary goal is to promote the artist or band performing in the video clip, so that consumers will purchase their CDs, as well as other band related products. But more often than not, the video clip sells much more than just that. Lifestyles, fashion, cosmetics, cars, consumer and social behaviour are all promoted in an unsuspecting manner. Advertisers, as a result, have looked to MTV for ideas on how to better communicate with the youth market; adopting similar styles to get their message across. The following looks at how and why, the fusion of MTV and advertising works so well together by considering past research.

Non-motorized public transport : a global review and analysis of trends and issues

Over recent decades there has been growing interest in the role of non-motorized modes in the overall transport system (especially walking and cycling for private purposes) and many government initiatives have been taken to encourage these active modes. However there has been relatively little research attention given to the paid form of non-motorized travel which can be called non-motorized public transport (NMPT). This involves cycle-powered vehicles which can carry several passengers (plus the driver) and a small amount of goods; and which provide flexible hail-and-ride services. Effectively they are non-motorized taxis. Common forms include cycle-rickshaw (Bangladesh, India), becak (Indonesia), cyclos (Vietnam, Cambodia), bicitaxi (Columbia, Cuba), velo-taxi (Germany, Netherland), and pedicabs (UK, Japan, USA). --------- The popularity of NMPT is widespread in developing countries, where it caters for a wide range of mobility needs. For instance in Dhaka, Bangladesh, rickshaws are the preferred mode for non-walk trips and have a higher mode share than cars or buses. Factors that underlie the continued existence and popularity of NMPT in many developing countries include positive contribution to social equity, micro-macro economic significance, employment creation, and suitability for narrow and crowded streets. Although top speeds are lower than motorized modes, NMPT is competitive and cost-effective for short distance door-to-door trips that make up the bulk of travel in many developing cities. In addition, NMPT is often the preferred mode for vulnerable groups such as females, children and elderly people. NMPT is more prominent in developing countries but its popularity and significance is also gradually increasing in several developed countries of Asia, Europe and parts of North America, where there is a trend for the NMPT usage pattern to broaden from tourism to public transport. This shift is due to a number of factors including the eco-sustainable nature of NMPT; its operating flexibility (such as in areas where motorized vehicle access is restricted or discouraged through pricing); and the dynamics that it adds to the urban fabric. Whereas NMPT may have been seen as a “dying” mode, in many cities it is maintaining or increasing its significance and with potential for further growth. --------- This paper will examine and analyze global trends in NMPT incorporating both developing and developed country contexts and issues such as usage patterns; NMPT policy and management practices; technological development; and operational integration of NMPT into the overall transport system. It will look at how NMPT policies, practices and usage have changed over time and the differing trends in developing and developed countries. In particular, it will use Dhaka, Bangladesh as a case study in recognition of its standing as the major NMPT city in the world. The aim is to highlight NMPT issues and trends and their significance for shaping future policy towards NMPT in developing and developed countries. The paper will be of interest to transport planners, traffic engineers, urban and regional planners, environmentalists, economists and policy makers.

Prosecution history estoppel in the UK?

The doctrine of 'prosecution history estoppel' (PH estoppel) as developed in the United States has strong intuitive appeal, especially when applied to counterbalance a related patent law principle, the doctrine of equivalents. The doctrines are receiving increasing attention in US patent decisions, to the point where one patent litigator recently compared them to "two cars that keep bumping fenders. They are frequently returned to the shop for repairs". Could PH estoppel find its way into UK patent law? This article briefly examines the doctrine, its evolution in the US and the problems associated with importing the doctrine into the UK. As the EU legislation stands, Article 69 and the Protocol to the European Patent Convention (EPC) pose serious obstacles to using the doctrine directly in claim construction. However there appears to be some scope to apply the doctrine as a limited form of defence in infringement actions.

Flexible high-power multi DC-DC converters for train systems

This thesis reports on the investigations, simulations and analyses of novel power electronics topologies and control strategies. The research is financed by an Australian Research Council (ARC) Linkage (07-09) grant. Therefore, in addition to developing original research and contributing to the available knowledge of power electronics, it also contributes to the design of a DC-DC converter for specific application to the auxiliary power supply in electric trains. Specifically, in this regard, it contributes to the design of a 7.5 kW DC-DC converter for the industrial partner (Schaffler and Associates Ltd) who supported this project. As the thesis is formatted as a ‘thesis by publication’, the contents are organized around published papers. The research has resulted in eleven papers, including seven peer reviewed and published conference papers, one published journal paper, two journal papers accepted for publication and one submitted journal paper (provisionally accepted subject to few changes). In this research, several novel DC-DC converter topologies are introduced, analysed, and tested. The similarity of all of the topologies devised lies in their ‘current circulating’ switching state, which allows them to store some energy in the inductor, as extra inductor current. The stored energy may be applied to enhance the performance of the converter in the occurrence of load current or input voltage disturbances. In addition, when there is an alternating load current, the ability to store energy allows the converter to perform satisfactorily despite frequently and highly varying load current. In this research, the capability of current storage has been utilised to design topologies for specific applications, and the enhancement of the performance of the considered applications has been illustrated. The simplest DC-DC converter topology, which has a ‘current circulating’ switching state, is the Positive Buck-Boost (PBB) converter (also known as the non-inverting Buck-Boost converter). Usually, the topology of the PBB converter is operating as a Buck or a Boost converter in applications with widely varying input voltage or output reference voltage. For example, in electric railways (the application of our industrial partner), the overhead line voltage alternates from 1000VDC to 500VDC and the required regulated voltage is 600VDC. In the course of this research, our industrial partner (Schaffler and Associates Ltd) industrialized a PBB converter–the ‘Mudo converter’–operating at 7.5 kW. Programming the onboard DSP and testing the PBB converter in experimental and nominal power and voltage was part of this research program. In the earlier stages of this research, the advantages and drawbacks of utilization of the ‘current circulating’ switching state in the positive Buck-Boost converter were investigated. In brief, the advantages were found to be robustness against input voltage and current load disturbances, and the drawback was extra conduction and switching loss. Although the robustness against disturbances is desirable for many applications, the price of energy loss must be minimized to attract attention to the utilization of the PBB converter. In further stages of this research, two novel control strategies for different applications were devised to minimise the extra energy loss while the advantages of the positive Buck-Boost converter were fully utilized. The first strategy is Smart Load Controller (SLC) for applications with pre-knowledge or predictability of input voltage and/or load current disturbances. A convenient example of these applications is electric/hybrid cars where a master controller commands all changes in loads and voltage sources. Therefore, the master controller has a pre-knowledge of the load and input voltage disturbances so it can apply the SLC strategy to utilize robustness of the PBB converter. Another strategy aiming to minimise energy loss and maximise the robustness in the face of disturbance is developed to cover applications with unexpected disturbances. This strategy is named Dynamic Hysteresis Band (DHB), and is used to manipulate the hysteresis band height after occurrence of disturbance to reduce dynamics of the output voltage. When no disturbance has occurred, the PBB converter works with minimum inductor current and minimum energy loss. New topologies based on the PBB converter have been introduced to address input voltage disturbances for different onboard applications. The research shows that the performance of applications of symmetrical/asymmetrical multi-level diode-clamped inverters, DC-networks, and linear-assisted RF amplifiers may be enhanced by the utilization of topologies based on the PBB converter. Multi-level diode-clamped inverters have the problem of DC-link voltage balancing when the power factor of their load closes to unity. This research has shown that this problem may be solved with a suitable multi-output DC-DC converter supplying DClink capacitors. Furthermore, the multi-level diode-clamped inverters supplied with asymmetrical DC-link voltages may improve the quality of load voltage and reduce the level of Electromagnetic Interference (EMI). Mathematical analyses and experiments on supplying symmetrical and asymmetrical multi-level inverters by specifically designed multi-output DC-DC converters have been reported in two journal papers. Another application in which the system performance can be improved by utilization of the ‘current circulating’ switching state is linear-assisted RF amplifiers in communicational receivers. The concept of ‘linear-assisted’ is to divide the signal into two frequency domains: low frequency, which should be amplified by a switching circuit; and the high frequency domain, which should be amplified by a linear amplifier. The objective is to minimize the overall power loss. This research suggests using the current storage capacity of a PBB based converter to increase its bandwidth, and to increase the domain of the switching converter. The PBB converter addresses the industrial demand for a DC-DC converter for the application of auxiliary power supply of a typical electric train. However, after testing the industrial prototype of the PBB converter, there were some voltage and current spikes because of switching. To attenuate this problem without significantly increasing the switching loss, the idea of Active Gate Signalling (AGS) is presented. AGS suggests a smart gate driver that selectively controls the switching process to reduce voltage/current spikes, without unacceptable reduction in the efficiency of switching.

Top Gear, top journalism : three lessons for political journalists from the world's most popular TV show

This article examines the BBC program Top Gear, discussing why it has become one of the world’s most-watched TV programs, and how it has very successfully captivated an audience who might otherwise not be particularly interested in cars. The analysis of the show is here framed in the form of three ‘lessons’ for journalists, suggesting that some of the entertaining (and highly engaging) ways in which Top Gear presents information to its viewers could be usefully applied in the coverage of politics – a domain of knowledge which, like cars, many citizens find abstract or boring.