381 resultados para bidirectional
Resumo:
Content protection is a key component for the success of a multimedia services platform, as proven by the plethora of solutions currently on the market. In this paper we analyze a new network scenario where permanent bidirectional connectivity and video-aware encryption technologies allow a trustful operation of ubiquitous end devices. We propose new scalable models for a content protection architecture that may achieve dramatic improvement in robustness, reliability, and scalability. Selective ciphering and countermeasures are included in those models, together with several examples of their application.
Resumo:
En los últimos años, y a la luz de los retos a los que se enfrenta la sociedad, algunas voces están urgiendo a dejar atrás los paradigmas modernos —eficiencia y rendimiento— que sustentan a las llamadas prácticas sostenibles, y están alentando a repensar, en el contexto de los cambios científicos y culturales, una agenda termodinámica y ecológica para la arquitectura. La cartografía que presenta esta tesis doctoral se debe de entender en este contexto. Alineándose con esta necesidad, se esfuerza por dar a este empeño la profundidad histórica de la que carece. De este modo, el esfuerzo por dotar a la arquitectura de una agenda de base científica, se refuerza con una discusión cultural sobre el progresivo empoderamiento de las ideas termodinámicas en la arquitectura. Esta cartografía explora la historia de las ideas termodinámicas en la arquitectura desde el principio del siglo XX hasta la actualidad. Estudia, con el paso de los sistemas en equilibrio a los alejados del equilibrio como trasfondo, como las ideas termodinámicas han ido infiltrándose gradualmente en la arquitectura. Este esfuerzo se ha planteado desde un doble objetivo. Primero, adquirir una distancia crítica respecto de las prácticas modernas, de modo que se refuerce y recalibre el armazón intelectual y las herramientas sobre las que se está apoyando esta proyecto termodinámico. Y segundo, desarrollar una aproximación proyectual sobre la que se pueda fundamentar una agenda termodinámica para la arquitectura, asunto que se aborda desde la firme creencia de que es posible una re-descripción crítica de la realidad. De acuerdo con intercambios de energía que se dan alrededor y a través de un edificio, esta cartografía se ha estructurado en tres entornos termodinámicos, que sintetizan mediante un corte transversal la variedad de intercambios de energía que se dan en la arquitectura: -Cualquier edificio, como constructo espacial y material inmerso en el medio, intercambia energía mediante un flujo bidireccional con su contexto, definiendo un primer entorno termodinámico al que se denomina atmósferas territoriales. -En el interior de los edificios, los flujos termodinámicos entre la arquitectura y su ambiente interior definen un segundo entorno termodinámico, atmósferas materiales, que explora las interacciones entre los sistemas materiales y la atmósfera interior. -El tercer entorno termodinámico, atmosferas fisiológicas, explora los intercambios de energía que se dan entre el cuerpo humano y el ambiente invisible que lo envuelve, desplazando el objeto de la arquitectura desde el marco físico hacia la interacción entre la atmósfera y los procesos somáticos y percepciones neurobiológicas de los usuarios. A través de estos tres entornos termodinámicos, esta cartografía mapea aquellos patrones climáticos que son relevantes para la arquitectura, definiendo tres situaciones espaciales y temporales sobre las que los arquitectos deben actuar. Estudiando las conexiones entre la atmósfera, la energía y la arquitectura, este mapa presenta un conjunto de ideas termodinámicas disponibles —desde los parámetros de confort definidos por la industria del aire acondicionado hasta las técnicas de acondicionamiento pasivo— que, para ser efectivas, necesitan ser evaluadas, sintetizadas y recombinadas a la luz de los retos de nuestro tiempo. El resultado es un manual que, mediando entre la arquitectura y la ciencia, y a través de este relato histórico, acorta la distancia entre la arquitectura y la termodinámica, preparando el terreno para la definición de una agenda termodinámica para el proyecto de arquitectura. A este respecto, este mapa se entiende como uno de los pasos necesarios para que la arquitectura recupere la capacidad de intervenir en la acuciante realidad a la que se enfrenta. ABSTRACT During the last five years, in the light of current challenges, several voices are urging to leave behind the modern energy paradigms —efficiency and performance— on which the so called sustainable practices are relying, and are posing the need to rethink, in the light of the scientific and cultural shifts, the thermodynamic and ecological models for architecture. The historical cartography this PhD dissertation presents aligns with this effort, providing the cultural background that this endeavor requires. The drive to ground architecture on a scientific basis needs to be complemented with a cultural discussion of the history of thermodynamic ideas in architecture. This cartography explores the history of thermodynamic ideas in architecture, from the turn of the 20th century until present day, focusing on the energy interactions between architecture and atmosphere. It surveys the evolution of thermodynamic ideas —the passage from equilibrium to far from equilibrium thermodynamics— and how these have gradually empowered within design and building practices. In doing so, it has posed a double-objective: first, to acquire a critical distance with modern practices which strengthens and recalibrates the intellectual framework and the tools in which contemporary architectural endeavors are unfolding; and second, to develop a projective approach for the development a thermodynamic agenda for architecture and atmosphere, with the firm belief that a critical re-imagination of reality is possible. According to the different systems which exchange energy across a building, the cartography has been structured in three particular thermodynamic environments, providing a synthetic cross-section of the range of thermodynamic exchanges which take place in architecture: -Buildings, as spatial and material constructs immersed in the environment, are subject to a contiuous bidirectional flow of energy with its context, defining a the first thermodynamic environment called territorial atmospheres. -Inside buildings, the thermodynamic flow between architecture and its indoor ambient defines a second thermodynamic environment, material atmospheres, which explores the energy interactions between the indoor atmosphere and its material systems. -The third thermodynamic environment, physiological atmospheres, explores the energy exchanges between the human body and the invisible environment which envelopes it, shifting design drivers from building to the interaction between the atmosphere and the somatic processes and neurobiological perceptions of users. Through these three thermodynamic environments, this cartography maps those climatic patterns which pertain to architecture, providing three situations on which designers need to take stock. Studying the connections between atmosphere, energy and architecture this map presents, not a historical paradigm shift from mechanical climate control to bioclimatic passive techniques, but a range of available thermodynamic ideas which need to be assessed, synthesized and recombined in the light of the emerging challenges of our time. The result is a manual which, mediating between architecture and science, and through this particular historical account, bridges the gap between architecture and thermodynamics, paving the way to a renewed approach to atmosphere, energy and architecture. In this regard this cartography is understood as one of the necessary steps to recuperate architecture’s lost capacity to intervene in the pressing reality of contemporary societies.
Resumo:
Este proyecto se encuadra dentro de los estudios de impacto que están produciendo en las empresas el desarrollo e incorporación de las nuevas tecnologías, y más concretamente la implantación de las aplicaciones provenientes de la denominada web 2.0. Se conoce con este nombre a las herramientas web que permiten una comunicación bidireccional, es decir, el usuario y la empresa pueden intercambiar opiniones, de manera que el usuario adquiere un nuevo papel más protagonista, presentando ideas, aclaraciones, gustos, críticas...que son tenidas en cuenta por la empresa para realizar su actividad. De esta manera se ha roto con el modelo anterior donde el usuario solo podía consultar la información de una página web, era simple receptor de la información. El objetivo de este estudio es conocer cómo las empresas están incorporando estas tecnologías 2.0 a su estrategia empresarial, y cómo términos como innovación abierta o co-creación están tomando mayor importancia en el entorno empresarial gracias a estas nuevas tecnologías. Si bien existen estudios a nivel de consultoría que generalmente aportan información sobre cuáles son las plataformas 2.0 más utilizadas en el mundo empresarial, no se han encontrado hasta ahora estudios que vinculen estas plataformas entre ellas y con la estructura empresarial, para poder definir un perfil de la organización que trabaja con ellas o el nivel de madurez de la incorporación de estas tecnologías en las organizaciones. Analizar cualitativamente estos aspectos, significa estudiar los nuevos conceptos incorporados a las tecnologías 2.0 en la empresa. Un análisis cuantitativo nos llevaría a estudiar de manera práctica que tipo de recursos y en qué cantidad se están utilizando y su vinculación con la estructura de la organización. Para ello: En una primera parte, nos centraremos en las diferentes formas en las que se puede acceder a Internet, y a continuación enfocaremos el estudio en los dispositivos móviles que nos permiten la conexión desde cualquier lugar y en cualquier instante. Con esto conseguiremos tener una situación actual del mercado de las TIC y veremos cómo las empresas han ido construyendo nuevas políticas para cambiar su estrategia con el fin de estar presentes en los nuevos dispositivos móviles y no perder cuota de mercado. Tras ello, veremos porqué conceptos como el de innovación abierta y proceso de co-creación han sido posibles gracias a la implantación de las tecnologías 2.0 en el ámbito empresarial, facilitando que la empresa y el usuario final cooperen y vayan de la mano en una misma dirección; la empresa se surte de las aportaciones que los usuarios ofrecen, y por otra parte el usuario se siente valorado por la empresa para conseguir la meta final. Es aquí donde comprobaremos la transformación que ha sufrido la empresa en sus distintos sectores departamentales (marketing, ventas, recursos humanos y atención al cliente) como consecuencia de la incorporación de las herramientas 2.0 al mundo laboral. Por todo ello, se enumerarán los distintos usos que realizan las empresas de las redes social más habituales, y además se describirán las principales herramientas y/o aplicaciones para monitorizar las redes sociales que servirán a la empresa para hacer un seguimiento de las mismas. La segunda parte del proyecto será un caso práctico y servirá para ofrecer una visión más real del estado actual de las empresas y su relación con las redes sociales. Para la recopilación de los datos se han escogido las empresas que pertenecen al sector de la “Fabricación de productos informáticos, electrónicos y ópticos”. En cuento a las redes sociales elegidas, han sido Facebook y Twitter. Este estudio práctico nos hará entender mejor el impacto directo que tienen las redes sociales en la actividad diaria de las empresas. Finalmente se realizarán una serie de consideraciones a modo de directrices que servirán para tratar de entender cómo se están utilizando las redes sociales en el entorno empresarial y cuál puede ser la manera más óptima de utilizarlas según el estudio presentado. ABSTRACT. This project is part of the impact studies arisen in companies by the development and incorporation of new technologies and, specifically, by the implementation of applications from the so-called web 2.0. That is how we call the web tools that allow bidirectional communication, this is, user and company can exchange opinions, in such a way that users acquire a leading role, submitting ideas, explanations, preferences, criticism... considered by the company when performing its activities. This way, we have broken with the previous model, where users could only check information from a web page and were simple information recipients. The objective of this study is to get to know how companies are incorporating these technologies 2.0 to their business strategy and how terms such as open innovation or co-creation are becoming more important in the business sphere thanks to these new technologies. Even if there are consulting studies that generally provide information about which are the platforms 2.0 more used in the business world, no studies have been found until now that link such platforms among them and with the business structure, in order to define a profile of the organization that works with them or the level of development of the incorporation of these technologies in the organizations. A qualitative analysis of these aspects involves studying the new concepts incorporated to technologies 2.0 by companies. A qualitative analysis would lead us to study in a practical manner what kind of resources and what amount are being used and their relation with the organization structure. Therefore: First, we will focus on the different ways to gain access to the Internet and, afterwards, we will focus the study on mobile devices that allow us to be connected everywhere any time. This way, we will manage to obtain a present situation of the ICT market and we will see how companies have constructed new policies to change their strategy in order to be present in the new mobile devices without losing their market share. Later, we will review why concepts such as open innovation and co-creation process have been possible thanks to the implementation of technologies 2.0 in the business environment, facilitating that companies and final users cooperate and walk hand in hand in the same direction; companies stock up on the contributions offered by users and, on the other hand, users feel appreciated by companies in the achievement of the final goal. Here we will confirm the transformation suffering by companies in different department sectors (marketing, sales, human resources and customer service) as a result of the incorporation of tools 2.0 to the work environment. Therefore, we will enumerate the different uses that companies make of the most common social networks, describing the main tools and/or applications to monitor social networks used by companies to follow them up. The second part of the project will be a case study to offer a more real vision of the present status of companies and their relation with social networks. To collect the data, we have selected companies from the “Manufacture of computer, electronic and optical products” industry. The social networks chosen are Facebook and Twitter. This case study will help us to get a better understanding of the direct impact of social networks in companies’ daily activity. Finally, we will offer a series of considerations and guidelines to try to understand how are social networks being used in the business environment and what can be the most suitable manner to use them according to this study.
Resumo:
Desde hace ya varias décadas la praxis de la ecología ha venido reconociendo la necesidad de estudiar los múltiples sistemas de interacción del ser humano, como especie viva, y su entorno. Entidades espaciales como el paisaje geográfico son empleadas para delimitar sistemas territoriales operados por la sociedad, precisando campos concretos de su acción física, biológica y cultural. La ecología aborda así el conocimiento científico del territorio como asentamiento humano, rastrea sus patrones espaciales y analiza su compleja estructura funcional. En ese contexto, la transferencia de herramientas e instrumentos desde la ecología al ámbito proyectivo posee ya un bagaje de más de cinco décadas. Cada vez con más frecuencia el proyecto emplea parámetros, inventarios, fórmulas, indicadores y tecnologías que tratan de dar una respuesta ambientalmente adecuada a los condicionantes de contorno, por ejemplo aprovechando las condiciones climáticas en la optimización energética o proponiendo programas de usos del suelo que eviten perturbaciones en ecosistemas de interés. Con todo, en el momento presente surgen voces que, ante el dominio indiscutible de los enfoques netamente deterministas, tratan de recordar que los principios del pensamiento ecológico van más allá del mero control cuantitativo de los procesos biofísicos. Recuerdan que la etología demostró a principios del XX que el ser humano, como ser consciente, inviste una relación de intimidad con su entorno que supera tales perspectivas: a través de la correspondencia entre percepción y significación, entre lo físico y lo psíquico, entre interioridad y exterioridad, las personas abrazan la plenitud de aquello que les rodea en un acto de profunda conciliación afectiva. De tal ligadura de intimidad depende, sí o sí, y en toda su profundidad, la aceptación humana del entorno construido. A través de la noción de ambiente [Umwelt] se demuestra que la relación del hombre con su entorno es inseparable, bidireccional y coordinada y, por lo tanto, desde una posición coherente, la experiencia del espacio puede ser examinada a partir de la reciprocidad que constituyen, en continuidad, la persona y el lugar. De esta forma, la tesis dirige su objetivo principal a explorar y considerar, desde el proyecto, el significado y la influencia de la experiencia ambiental del espacio construido en la vida humana. Es más que probable que buena parte de los problemas de desafección del hombre con los paisajes transformados de su contemporaneidad tenga que ver con que tanto las intensidades de la experiencia y percepción humana, como la potestad interpretativa de sus productos culturales, incluyendo la arquitectura, han sido fuertemente reducidas. Ante este problema, la investigación toma como hipótesis la oportunidad que ofrece el pensamiento ecológico de reformular la experiencia estética como un acto de conocimiento, como un evento donde se da el encuentro físico y se construyen significados, donde se sancionan valores sociales y se mira hacia el futuro. Se ha de señalar que la presente tesis doctoral arranca en el Laboratorio de Paisaje del Grupo de Investigación Paisaje Cultural de la Universidad Politécnica de Madrid dirigido por Concha Lapayese y Darío Gazapo, y por tanto hace suyos para el estado del arte los principales conceptos e ideas bajo los que el trabajo teórico y práctico del grupo se viene orientando desde hace años: la consideración del paisaje como acontecimiento; la oscilación de la interpretación entre un paisaje específico y un paisaje genérico en un mundo globalizado; el reconocimiento de la experiencia estética del paisaje como una toma de conciencia social; y en definitiva, la reivindicación de la interioridad en el proyecto contemporáneo. La investigación profundiza en una línea de oportunidad que se abre al promover lo que se ha llamado un conocimiento por lo sentido como estrategia ambiental que permite contrarrestar mitos profundamente arraigados en las estructuras sociales. El primer paso en ese recorrido sería explorar ecológicamente el aporte de la experiencia estética; esto es, su consideración como forma de conocimiento específico. Resultaría pertinente impulsar la idea de la inmersión en el paisaje como fenómeno experiencial, sensual y corporal, y enfrentar, desde ahí, el problema de la aceptación social de lo nuevo y lo trasformado de acuerdo con el momento actual. La exploración sobre la afectividad en el ambiente no es, en cualquier caso, un asunto nuevo. Sin pretensiones de historiografía, dos momentos del siglo XX concentran el interés de la investigación. La primera se corresponde fundamentalmente con la segunda década del siglo, en relación a una serie de influencias que desde los avances científicos determinaron singulares aventuras del arte más experimental. La segunda se posiciona en el entorno de 1970, época en la que es conocido el interés que despertaron las cuestiones ambientales. En ambos casos se han estudiado aportaciones que desvelan conceptos determinantes en la definición de la experiencia estética como un evento de adquisición de conocimiento por lo sentido. Es conveniente adelantar el rol de centralidad que para la investigación tiene el concepto de energía, tal como el propio título subraya. La energía como realidad material y sensible es el sustrato que permite navegar por el principio de unidad epistemológica que subyace al pensamiento ecológico. Sus continuas referencias simbólicas, físicas y metafóricas entre los artistas estudiados no son un mero recurso iconográfico: mantienen inherente el principio de continuidad ambiental en el cual el ser humano y la inmensidad del cosmos navegan indisociables. Un discurso unificado y consistente sobre los aportes de la experiencia estética enfocada como forma de conocimiento por lo sentido hila la lectura histórica, conceptual y práctica de toda la investigación. Con ello se alcanza a hilvanar un diagrama conceptual, modelo de análisis proyectivo, que recoge ideas científicas, filosóficas y proyectivas. De alguna manera, el diagrama trata de dibujar, desde los principios del pensamiento ecológico, la correlación de continuidad que, vacilante, tensa, sutil y frágil se desplaza incesante e irresuelta entre interioridad y exterioridad. ABSTRACT Over the last few decades ecological practice has come to acknowledge a need for studying the multiple systems of interaction between the human being - inasmuch as it is a living species - and its environment. Spatial entities such as the geographic notion of landscape have been used to delimitate the territorial systems operated by society and to describe in detail specific fields of its physical, biological and cultural action. Ecology has thus managed to address the scientific knowledge of the territory as a human settlement, tracking its spatial patterns and analysing its complex functional structure. In this context, the transfer of tools and instruments from the field of ecology to that of design has a tradition already going back more than fifty years. Increasingly more often, design makes use of parameters, inventories, formulas, indicators and technologies to give an environmentally sound response to contour conditions: for instance, taking advantage of the local climate for the optimisation of energy consumption or proposing land uses that avoid disturbing valuable ecosystems. Yet in the present day some voices have arisen that, against the uncontested domination of purely positivistic approaches, are trying to draw attention to the fact that the principles of ecological thought go beyond mere quantitative control of biophysical processes. They point out that, in the early 20th century, ethology proved that the human being, as a conscious entity, invests itself into a relationship of intimacy with its environment that surpasses such perspectives: through the correspondences between perception and signification, between physical and psychological or between inside and outside, people embrace the entirety of their surroundings in an action of deep affective conciliation. It is on this link of intimacy that - fully and unquestionably - human acceptance of the built environment depends. Through the notion of environment [Umwelt] it can be proven that the relationship between the human being and its environment is inseparable, bidirectional and coordinated; and that, therefore, from a coherent position the experience of space can be examined through the reciprocity constituted continuously by person and place. Thus, the main goal in this thesis is to explore and acknowledge, from the standpoint of design, the meaning and influence of the environmental experience in human life. It is extremely likely that many of the issues with mankind’s alienation from the transformed landscapes of the present day arise from the fact that both the intensity of human perception and experience and the interpretive capacity of its cultural products –including architecture - have been greatly reduced. Facing this issue, research has taken as hypothesis the opportunity offered by ecological thought of reformulating aesthetic experience as an act of knowledge – as an event where physical encounter takes place and meanings are constructed; where social values are sanctioned and the path towards the future is drawn. This notwithstanding, the present thesis began in the Landscape Laboratory of the Technical University of Madrid Cultural Landscape Research Group (GIPC-UPM), led by Concha Lapayese and Darío Gazapo; and has therefore appropriated for its state of the art the main concepts and ideas that have been orienting the practical and theoretical work of the latter: the understanding of landscape as an event, the oscillation of interpretation between a specific and a generic landscape within a globalised world; the acknowledgement of the aesthetic experience of landscape as a way of acquiring social awareness; and, all in all, a vindication of interiority in contemporary design. An exploration has been made of the line of opportunity that is opened when promoting what has been termed knowledge through the senses as an environmental strategy allowing to counter myths deeply rooted in social structures. The first step in this path would be an ecological exploration of the contribution of the aesthetic experience; that is, its consideration as a type of specific knowledge. It would be pertinent to further the idea of immersion into the landscape as an experiential, sensual and corporeal phenomenon and, from that point, to face the issue of social acceptance of what is new and transformed according to the values of the present day. The exploration of affectivity in the environment is not, at any rate, a new topic. Without aspiring to make a history of it, we can mark two points in the 20th century that have concentrated the interest of this research. The first coincides with the second decade of the century and relates to a number of influences that, arising from scientific progress, determined the singular adventures of the more experimental tendencies in art. The second is centred around 1970: a period in which the interest drawn by environmental matters is well known. In both cases, contributions have been studied that reveal crucial concepts in defining the aesthetic experience as an event for the acquisition of knowledge through the senses. It is necessary to highlight the role of centrality that the concept of energy has throughout this research, as is evident even in its title. Energy as a material, sensitive reality is the substrate making it possible to navigate through the principle of epistemological unity underlying ecological thought. The continuous symbolic, physical and metaphorical references to it among the artists studied here are not a mere iconographic source: they remind of the inherency of the principle of environmental continuity within which the human being and the immensity of cosmos travel indissociably. A unified, consistent discourse on the contributions of the aesthetic experience addressed as knowledge through the senses weaves together the historic, conceptual and practical reading of the whole research. With it, a conceptual diagram is constructed – a model of design analysis – gathering together scientific, philosophical and design ideas. Somehow, the diagram tries to draw from the principles of ecological thought the correlation of continuity that, vacillating, tense, subtle and fragile, shifts incessantly and unresolved between interiority and exteriority.
Resumo:
RDB to RDF Mapping Language (R2RML) es una recomendación del W3C que permite especificar reglas para transformar bases de datos relacionales a RDF. Estos datos en RDF se pueden materializar y almacenar en un sistema gestor de tripletas RDF (normalmente conocidos con el nombre triple store), en el cual se pueden evaluar consultas SPARQL. Sin embargo, hay casos en los cuales la materialización no es adecuada o posible, por ejemplo, cuando la base de datos se actualiza frecuentemente. En estos casos, lo mejor es considerar los datos en RDF como datos virtuales, de tal manera que las consultas SPARQL anteriormente mencionadas se traduzcan a consultas SQL que se pueden evaluar sobre los sistemas gestores de bases de datos relacionales (SGBD) originales. Para esta traducción se tienen en cuenta los mapeos R2RML. La primera parte de esta tesis se centra en la traducción de consultas. Se propone una formalización de la traducción de SPARQL a SQL utilizando mapeos R2RML. Además se proponen varias técnicas de optimización para generar consultas SQL que son más eficientes cuando son evaluadas en sistemas gestores de bases de datos relacionales. Este enfoque se evalúa mediante un benchmark sintético y varios casos reales. Otra recomendación relacionada con R2RML es la conocida como Direct Mapping (DM), que establece reglas fijas para la transformación de datos relacionales a RDF. A pesar de que ambas recomendaciones se publicaron al mismo tiempo, en septiembre de 2012, todavía no se ha realizado un estudio formal sobre la relación entre ellas. Por tanto, la segunda parte de esta tesis se centra en el estudio de la relación entre R2RML y DM. Se divide este estudio en dos partes: de R2RML a DM, y de DM a R2RML. En el primer caso, se estudia un fragmento de R2RML que tiene la misma expresividad que DM. En el segundo caso, se representan las reglas de DM como mapeos R2RML, y también se añade la semántica implícita (relaciones de subclase, 1-N y M-N) que se puede encontrar codificada en la base de datos. Esta tesis muestra que es posible usar R2RML en casos reales, sin necesidad de realizar materializaciones de los datos, puesto que las consultas SQL generadas son suficientemente eficientes cuando son evaluadas en el sistema gestor de base de datos relacional. Asimismo, esta tesis profundiza en el entendimiento de la relación existente entre las dos recomendaciones del W3C, algo que no había sido estudiado con anterioridad. ABSTRACT. RDB to RDF Mapping Language (R2RML) is a W3C recommendation that allows specifying rules for transforming relational databases into RDF. This RDF data can be materialized and stored in a triple store, so that SPARQL queries can be evaluated by the triple store. However, there are several cases where materialization is not adequate or possible, for example, if the underlying relational database is updated frequently. In those cases, RDF data is better kept virtual, and hence SPARQL queries over it have to be translated into SQL queries to the underlying relational database system considering that the translation process has to take into account the specified R2RML mappings. The first part of this thesis focuses on query translation. We discuss the formalization of the translation from SPARQL to SQL queries that takes into account R2RML mappings. Furthermore, we propose several optimization techniques so that the translation procedure generates SQL queries that can be evaluated more efficiently over the underlying databases. We evaluate our approach using a synthetic benchmark and several real cases, and show positive results that we obtained. Direct Mapping (DM) is another W3C recommendation for the generation of RDF data from relational databases. While R2RML allows users to specify their own transformation rules, DM establishes fixed transformation rules. Although both recommendations were published at the same time, September 2012, there has not been any study regarding the relationship between them. The second part of this thesis focuses on the study of the relationship between R2RML and DM. We divide this study into two directions: from R2RML to DM, and from DM to R2RML. From R2RML to DM, we study a fragment of R2RML having the same expressive power than DM. From DM to R2RML, we represent DM transformation rules as R2RML mappings, and also add the implicit semantics encoded in databases, such as subclass, 1-N and N-N relationships. This thesis shows that by formalizing and optimizing R2RML-based SPARQL to SQL query translation, it is possible to use R2RML engines in real cases as the resulting SQL is efficient enough to be evaluated by the underlying relational databases. In addition to that, this thesis facilitates the understanding of bidirectional relationship between the two W3C recommendations, something that had not been studied before.
Resumo:
Las enfermedades no transmisibles provocan cada ano 38 millones de fallecimientos en el mundo. Entre ellas, tan solo cuatro enfermedades son responsables del 82% de estas muertes: las enfermedades cardiovasculares, las enfermedades crónicas respiratorias, la diabetes, y el cáncer. Se prevé que estas cifras aumenten en los próximos anos, ya que las tendencias indican que en el año 2030 las muertes por esta causa ascenderán a 53 millones de personas. La Organización Mundial de la Salud (OMS) considera importante buscar soluciones para afrontar esta situación y ha solicitado a los gobiernos del mundo la implementación de intervenciones para mejorar los hábitos de vida de las personas y reducir así el riesgo de desarrollo de enfermedades no trasmisibles. Cada año se producen 32 millones de infartos de miocardio y derrames celebrales, de los cuales 12.5 son mortales. En el mundo entre el 40% y 75% de la víctimas de un infarto de miocardio mueren antes de su ingreso en el hospital. En los casos que sobreviven, la adopción de un estilo de vida saludable puede evitar infartos sucesivo, y supone un ahorro potencial de 6 billones de euros al año. La rehabilitación cardiaca es un programa individualizado que aplica un método multidisciplinar para ayudar al paciente a recuperar su condición física, a gestionar la enfermedad cardiovascular y sus comorbilidades, a adoptar hábitos de vida saludables, y a promover su salud mental. La rehabilitación cardiaca requiere la total involucración y motivación del paciente, solo de esta manera se podrán promover hábitos saludables y mejorar la gestión y prevención de su enfermedad. Aunque la participación en los programas de rehabilitación cardiaca es baja, hoy en día existen programas de rehabilitación cardiaca que el paciente puede realizar en su casa. Estos suponen una solución prometedora para aumentar la participación. La rehabilitación cardiaca se considera una intervención integral donde los modelos de psicología de la salud son aplicados para promover un cambio en el estilo de vida de las personas así como para ayudarles a afrontar su propia enfermedad. Existen métodos para implementar cambios de hábitos y de aptitud, y también se considera muy relevante promover no solo el bienestar físico sino también el mental. Existen tecnologías que promueven los cambios de comportamientos en los seres humanos. En concreto, las tecnologías persuasivas y los sistemas de apoyo al cambio de comportamientos modelan las características, las estrategias y los métodos de diseño para promover cambios usando la tecnología. Pero estos modelos tienen algunas limitaciones: todavía no se ha definido que rol tienen las emociones en el cambio de comportamientos y como traducir los métodos de la psicología de la salud en la tecnología. Esta tesis se centra en tres elementos que tienen un rol clave en los cambios de hábitos y actitud: el estado físico, el estado mental, y la tecnología. -Estado de salud: un estado de salud critico puede modificar la actitud del ser humano respecto al cambio. A la vez un buen estado de salud hace que la necesidad del cambio sea menos percibida. -Estado emocional: la actitud tiene un componente afectivo. Los estados emocionales negativos pueden reducir la habilidad de una persona para adoptar nuevos comportamientos. La salud mental es la situación ideal donde los individuos tienen predisposición a los cambios. La tecnología puede ayudar a las personas a adoptar nuevos hábitos, así como a mantener una salud física y mental. Este trabajo de investigación se centra en el diseño de tecnologías para la mejora del estado físico y emocional de las personas. Se ha propuesto un marco de diseño llamado “Well.Be.Sign”. El marco se basa en tres aspectos: El marco teórico: representa los elementos que se tienen que definir para diseñar tecnologías para promover el bienestar de las personas. -El diagrama de influencia: presenta las fuerzas de ‘persuasión’ en el contexto de la salud. El rol de las tecnologías persuasivas ha sido contextualizado en una dimensión donde otros elementos influencian el usuario. El proceso de diseño: describe el proceso de diseño utilizando una metodología iterativa e incremental que aplica una combinación de métodos de diseño existentes (Diseño Orientado a Objetivos, Diseño de Sistemas Persuasivos) así como elementos originales de este trabajo de investigación. Los métodos se han aplicados para diseñar un sistema que ofrezca un programa de tele-rehabilitación cardiaca. Inicialmente se ha diseñado un prototipo de acuerdo con las necesidades del usuario. En segundo lugar, el prototipo se ha extendido especificando la intervención requerida para al programa de rehabilitación cardiaca. Finalmente el sistema se ha desarrollado y validado en un ensayo clínico con grupo control, donde se observaron las variaciones del estado cardiovascular, el nivel de conocimiento acerca de la enfermedad, la percepción de la enfermedad, la persistencia de hábitos saludables, y la aceptabilidad del sistema. Los resultados muestran que el grupo de intervención tiene una superior capacidad cardiovascular, mejor conocimiento acerca de la enfermedad, y más percepción de control de la enfermedad. Asimismo, en algunos casos se ha registrado persistencia de los hábitos de ejercicios 6 meses después del uso del sistema. Otros dos estudios se han presentado para demonstrar la relevancia del estado emocional del usuario en el diseño de aplicaciones para la promoción del bienestar. En personas con una grave enfermedad crónica como la insuficiencia cardiaca, donde se ha presentado las conexiones entre estado de salud y estado emocional. En el estudio se ensena la relaciones que tienen los síntomas y las emociones negativas y como un estado negativo emocional puede empeorar la condición física del paciente. -Personas con trastornos del humor: el estudio muestra como las emociones pueden tener un impacto en la percepción de la tecnología por parte del usuario. ABSTRACT Noncommunicable diseases (NCDs) cause the death of 38 million people every year. Four major NCDs are responsible for 82% of these deaths: cardio vascular disease, chronic respiratory disease, diabetes and cancer. These pandemic numbers are projected to raise to 53 million deaths in 2030, and for this reason the assembly of the World Health Organization (WHO) considers communicable diseases as an urgent need to be addressed. It is also a trend to advocate the adoption of mobile technology to deliver health services and to promote healthy behaviours among citizens, but adopting healthS promoting lifestyle is still a difficult task facing human tendencies. Within this context, there is a promising opportunity: persuasive technologies. These technologies are intentionally designed to change a person’s attitudes or behaviours; when applied in this context, than can be used to change health-related attitudes, beliefs, and behaviours. Each year there are 32 million heart attacks and strokes globally, of which about 12.5 million are fatal. Worldwide between 40 and 75% of all heart-attack victims die before reaching hospital. Avoiding a second heart attack by improving adherence to lifestyle and medication regimens has a cost saving potential of around €6 billion per year. In most of the cases the cardiovascular event has been provoked by unhealthy lifestyle. Furthermore, after an MI event the patient's decision to adopt or not healthier behaviour will influence the progress of the disease. Cardio-rehabilitation is an individualized program that follows a multidisciplinary approach to support the user to recover from the Myocardial Infarction, manage the Cardio Vascular Disease and the comorbidities, adopt healthy habits, and cope with any emotional distress. Cardio- rehabilitation requires patient participation and willingness to perform behavioral modifications and change the attitude toward the management and prevention of the disease. Participation in the Cardio Rehabilitation program is not high; the home-based rehabilitation program is a promising solution to increase participation. Nowadays cardio rehabilitation is considered a comprehensive intervention in which models of health psychology are applied to promote the behaviour change of the individuals. Relevant methods that have been successfully applied to foster healthy habits include the Health Belief Model and the Trans Theoretical Model. Studies also demonstrate the importance to promote not only the physical but also the mental well being of the individuals. The idea of also promoting behaviour change using technologies has been defined by the literature as persuasive technologies or behaviour change support systems, in which the features, the strategies and the design method have been modelled to foster the behaviour change using technology. Limitations have been found in this model: there is still research to be done on the role of the emotions and how psychological health intervention can be translated into computer methods. This research focuses on three elements that could foster behaviour change in individuals: the physical and emotional status of the person, and the technology. Every component can influence the user's attitude and behaviour in the following ways: ' Physical status: bad physical status could change human attitude toward the necessity to adopt health behaviours; at the same time, good health status reduces the need to adopt healthy habits. ' Emotional status: the attitude has an affective component, negative emotional state can reduce the ability of a person to adopt new behaviours, and mental well being is the ideal situation in which individuals have a predisposition to adopt healthy behaviours. ' Technology: it can help users to adopt new behaviours and can also be support to promote physical and emotional status. Following this approach the idea driven in this research is that technology that is designed to improve the physical status and the emotional status of the individual could better foster behaviour change. According to this principle, the Well.Be.Sign framework has been proposed. The framework is based on three views: ' The theoretical framework: it represents the patterns that have to be defined to design the technologies to promote well being. ' The influence diagram: it shows the persuasive forces in the context of health care. The role of the persuasive technologies is contextualized in a wider universe where other factors and persuasive forces influence a patient. ' The design process: it shows the process of design using an iterative, incremental methodology that applies a combination of existing methodologies (Goal Directed Design and Persuasive System Design) and others that are original to this research. The methods have been applied to design a system to deliver cardio rehabilitation at home: first a prototype has been defined according to the user’s needs, then it has been extended with the specific intervention required for the cardio–rehabilitation, finally the system has been developed and validated in a controlled clinical study in which the cardiovascular fitness, the level of knowledge, the perception of the illness, the persistence of healthy habits and the system acceptance (only the intervention group) were measured. The results show that the intervention group increased cardiovascular capacity, knowledge, feeling of control of illness and perceived benefits of exercise at the end of the study. After six months of the study, a followSup of the exercise habits was performed. Some individuals of the intervention group continued to be engaged in the running exercise sessions promoted in the designed system. Two other cases have been presented to demonstrate the foundations of the Well.Be.Sign’s approach to promote both physical and emotional status: ' People affected by Heart Failure, in which a bidirectional connection between health status and emotions has been discussed with patients. Two correlations were demonstrated: the relationship between symptoms and negative emotional response, and that negative emotional status is correlated with worsening of chronic conditions. ' People with mood disorders: the study shows that emotions could also impact how the user perceives the technology.
Resumo:
En la última década la potencia instalada de energía solar fotovoltaica ha crecido una media de un 49% anual y se espera que alcance el 16%del consumo energético mundial en el año 2050. La mayor parte de estas instalaciones se corresponden con sistemas conectados a la red eléctrica y un amplio porcentaje de ellas son instalaciones domésticas o en edificios. En el mercado ya existen diferentes arquitecturas para este tipo de instalaciones, entre las que se encuentras los módulos AC. Un módulo AC consiste en un inversor, también conocido como micro-inversor, que se monta en la parte trasera de un panel o módulo fotovoltaico. Esta tecnología ofrece modularidad, redundancia y la extracción de la máxima potencia de cada panel solar de la instalación. Además, la expansión de esta tecnología posibilitará una reducción de costes asociados a las economías de escala y a la posibilidad de que el propio usuario pueda componer su propio sistema. Sin embargo, el micro-inversor debe ser capaz de proporcionar una ganancia de tensión adecuada para conectar el panel solar directamente a la red, mientras mantiene un rendimiento aceptable en un amplio rango de potencias. Asimismo, los estándares de conexión a red deber ser satisfechos y el tamaño y el tiempo de vida del micro-inversor son factores que han de tenerse siempre en cuenta. En esta tesis se propone un micro-inversor derivado de la topología “forward” controlado en el límite entre los modos de conducción continuo y discontinuo (BCM por sus siglas en inglés). El transformador de la topología propuesta mantiene la misma estructura que en el convertidor “forward” clásico y la utilización de interruptores bidireccionales en el secundario permite la conexión directa del inversor a la red. Asimismo el método de control elegido permite obtener factor de potencia cercano a la unidad con una implementación sencilla. En la tesis se presenta el principio de funcionamiento y los principales aspectos del diseño del micro-inversor propuesto. Con la idea de mantener una solución sencilla y de bajo coste, se ha seleccionado un controlador analógico que está originalmente pensado para controlar un corrector del factor de potencia en el mismo modo de conducción que el micro-inversor “forward”. La tesis presenta las principales modificaciones necesarias, con especial atención a la detección del cruce por cero de la corriente (ZCD por sus siglas en inglés) y la compatibilidad del controlador con la inclusión de un algoritmo de búsqueda del punto de máxima potencia (MPPT por sus siglas en inglés). Los resultados experimentales muestran las limitaciones de la implementación elegida e identifican al transformador como el principal contribuyente a las pérdidas del micro-inversor. El principal objetivo de esta tesis es contribuir a la aplicación de técnicas de control y diseño de sistemas multifase en micro-inversores fotovoltaicos. En esta tesis se van a considerar dos configuraciones multifase diferentes aplicadas al micro-inversor “forward” propuesto. La primera consiste en una variación con conexión paralelo-serie que permite la utilización de transformadores con una relación de vueltas baja, y por tanto bien acoplados, para conseguir una ganancia de tensión adecuada con un mejor rendimiento. Esta configuración emplea el mismo control BCM cuando la potencia extraída del panel solar es máxima. Este método de control implica que la frecuencia de conmutación se incrementa considerablemente cuando la potencia decrece, lo que compromete el rendimiento. Por lo tanto y con la intención de mantener unos bueno niveles de rendimiento ponderado, el micro-inversor funciona en modo de conducción discontinuo (DCM, por sus siglas en inglés) cuando la potencia extraía del panel solar es menor que la máxima. La segunda configuración multifase considerada en esta tesis es la aplicación de la técnica de paralelo con entrelazado. Además se han considerado dos técnicas diferentes para decidir el número de fases activas: dependiendo de la potencia continua extraída del panel solar y dependiendo de la potencia instantánea demandada por el micro-inversor. La aplicación de estas técnicas es interesante en los sistemas fotovoltaicos conectados a la red eléctrica por la posibilidad que brindan de obtener un rendimiento prácticamente plano en un amplio rango de potencia. Las configuraciones con entrelazado se controlan en DCM para evitar la necesidad de un control de corriente, lo que es importante cuando el número de fases es alto. Los núcleos adecuados para todas las configuraciones multifase consideradas se seleccionan usando el producto de áreas. Una vez seleccionados los núcleos se ha realizado un diseño detallado de cada uno de los transformadores. Con la información obtenida de los diseños y los resultados de simulación, se puede analizar el impacto que el número de transformadores utilizados tiene en el tamaño y el rendimiento de las distintas configuraciones. Los resultados de este análisis, presentado en esta tesis, se utilizan posteriormente para comparar las distintas configuraciones. Muchas otras topologías se han presentado en la literatura para abordar los diferentes aspectos a considerar en los micro-inversores, que han sido presentados anteriormente. La mayoría de estas topologías utilizan un transformador de alta frecuencia para solventar el salto de tensión y evitar problemas de seguridad y de puesta a tierra. En cualquier caso, es interesante evaluar si topologías sin aislamiento galvánico son aptas para su utilización como micro-inversores. En esta tesis se presenta una revisión de inversores con capacidad de elevar tensión, que se comparan bajo las mismas especificaciones. El objetivo es proporcionar la información necesaria para valorar si estas topologías son aplicables en los módulos AC. Las principales contribuciones de esta tesis son: • La aplicación del control BCM a un convertidor “forward” para obtener un micro-inversor de una etapa sencillo y de bajo coste. • La modificación de dicho micro-inversor con conexión paralelo-series de transformadores que permite reducir la corriente de los semiconductores y una ganancia de tensión adecuada con transformadores altamente acoplados. • La aplicación de técnicas de entrelazado y decisión de apagado de fases en la puesta en paralelo del micro-inversor “forward”. • El análisis y la comparación del efecto en el tamaño y el rendimiento del incremento del número de transformadores en las diferentes configuraciones multifase. • La eliminación de las medidas y los lazos de control de corriente en las topologías multifase con la utilización del modo de conducción discontinuo y un algoritmo MPPT sin necesidad de medida de corriente. • La recopilación y comparación bajo las mismas especificaciones de topologías inversoras con capacidad de elevar tensión, que pueden ser adecuadas para la utilización como micro-inversores. Esta tesis está estructurada en seis capítulos. El capítulo 1 presenta el marco en que se desarrolla la tesis así como el alcance de la misma. En el capítulo 2 se recopilan las topologías existentes de micro-invesores con aislamiento y aquellas sin aislamiento cuya implementación en un módulo AC es factible. Asimismo se presenta la comparación entre estas topologías bajo las mismas especificaciones. El capítulo 3 se centra en el micro-inversor “forward” que se propone originalmente en esta tesis. La aplicación de las técnicas multifase se aborda en los capítulos 4 y 5, en los que se presentan los análisis en función del número de transformadores. El capítulo está orientado a la propuesta paralelo-serie mientras que la configuración con entrelazado se analiza en el capítulo 5. Por último, en el capítulo 6 se presentan las contribuciones de esta tesis y los trabajos futuros. ABSTRACT In the last decade the photovoltaic (PV) installed power increased with an average growth of 49% per year and it is expected to cover the 16% of the global electricity consumption by 2050. Most of the installed PV power corresponds to grid-connected systems, with a significant percentage of residential installations. In these PV systems, the inverter is essential since it is the responsible of transferring into the grid the extracted power from the PV modules. Several architectures have been proposed for grid-connected residential PV systems, including the AC-module technology. An AC-module consists of an inverter, also known as micro-inverter, which is attached to a PV module. The AC-module technology offers modularity, redundancy and individual MPPT of each module. In addition, the expansion of this technology will enable the possibility of economies of scale of mass market and “plug and play” for the user, thus reducing the overall cost of the installation. However, the micro-inverter must be able to provide the required voltage boost to interface a low voltage PV module to the grid while keeping an acceptable efficiency in a wide power range. Furthermore, the quality standards must be satisfied and size and lifetime of the solutions must be always considered. In this thesis a single-stage forward micro-inverter with boundary mode operation is proposed to address the micro-inverter requirements. The transformer in the proposed topology remains as in the classic forward converter and bidirectional switches in the secondary side allows direct connection to the grid. In addition the selected control strategy allows high power factor current with a simple implementation. The operation of the topology is presented and the main design issues are introduced. With the intention to propose a simple and low-cost solution, an analog controller for a PFC operated in boundary mode is utilized. The main necessary modifications are discussed, with the focus on the zero current detection (ZCD) and the compatibility of the controller with a MPPT algorithm. The experimental results show the limitations of the selected analog controller implementation and the transformer is identified as a main losses contributor. The main objective of this thesis is to contribute in the application of control and design multiphase techniques to the PV micro-inverters. Two different multiphase configurations have been applied to the forward micro-inverter proposed in this thesis. The first one consists of a parallel-series connected variation which enables the use of low turns ratio, i.e. well coupled, transformers to achieve a proper voltage boost with an improved performance. This multiphase configuration implements BCM control at maximum load however. With this control method the switching frequency increases significantly for light load operation, thus jeopardizing the efficiency. Therefore, in order to keep acceptable weighted efficiency levels, DCM operation is selected for low power conditions. The second multiphase variation considered in this thesis is the interleaved configuration with two different phase shedding techniques: depending on the DC power extracted from the PV panel, and depending on the demanded instantaneous power. The application of interleaving techniques is interesting in PV grid-connected inverters for the possibility of flat efficiency behavior in a wide power range. The interleaved variations of the proposed forward micro-inverter are operated in DCM to avoid the current loop, which is important when the number of phases is large. The adequate transformer cores for all the multiphase configurations are selected according to the area product parameter and a detailed design of each required transformer is developed. With this information and simulation results, the impact in size and efficiency of the number of transformer used can be assessed. The considered multiphase topologies are compared in this thesis according to the results of the introduced analysis. Several other topological solutions have been proposed to solve the mentioned concerns in AC-module application. The most of these solutions use a high frequency transformer to boost the voltage and avoid grounding and safety issues. However, it is of interest to assess if the non-isolated topologies are suitable for AC-module application. In this thesis a review of transformerless step-up inverters is presented. The compiled topologies are compared using a set benchmark to provide the necessary information to assess whether non-isolated topologies are suitable for AC-module application. The main contributions of this thesis are: • The application of the boundary mode control with constant off-time to a forward converter, to obtain a simple and low-cost single-stage forward micro-inverter. • A modification of the forward micro-inverter with primary-parallel secondary-series connected transformers to reduce the current stress and improve the voltage gain with highly coupled transformers. •The application of the interleaved configuration with different phase shedding strategies to the proposed forward micro-inverter. • An analysis and comparison of the influence in size and efficiency of increasing the number of transformers in the parallel-series and interleaved multiphase configurations. • Elimination of the current loop and current measurements in the multiphase topologies by adopting DCM operation and a current sensorless MPPT. • A compilation and comparison with the same specifications of suitable non-isolated step-up inverters. This thesis is organized in six chapters. In Chapter 1 the background of single-phase PV-connected systems is discussed and the scope of the thesis is defined. Chapter 2 compiles the existing solutions for isolated micro-inverters and transformerless step-up inverters suitable for AC-module application. In addition, the most convenient non-isolated inverters are compared using a defined benchmark. Chapter 3 focuses on the originally proposed single-stage forward micro-inverter. The application of multiphase techniques is addressed in Chapter 4 and Chapter 5, and the impact in different parameters of increasing the number of phases is analyzed. In Chapter 4 an original primary-parallel secondary-series variation of the forward micro-inverter is presented, while Chapter 5 focuses on the application of the interleaved configuration. Finally, Chapter 6 discusses the contributions of the thesis and the future work.
Resumo:
La principal motivación para la elección del tema de la tesis es nuestra realidad energética y ambiental. Y más específicamente, la necesidad urgente de dar una respuesta a esta realidad desde el sector de la edificación. Por lo que, el trabajo parte de la búsqueda de soluciones pasivas que ayuden a la reducción del consumo energético y de las emisiones de C02 de los edificios, tanto nuevos como existentes. El objeto de estudio son aplicaciones innovadoras, basadas en el uso de materiales reactivos, con un efecto térmico de memoria bidireccional. La energía es un elemento imprescindible para el desarrollo. Sin embargo, el modelo energético predominante, basado principalmente en la utilización de combustibles de origen fósil, es uno de los importantes responsables del deterioro ambiental que sufre el planeta. Además, sus reservas son limitadas y están concentradas en unas pocas regiones del mundo, lo que genera problemas de dependencia, competitividad y de seguridad de suministro. Dado el gran potencial de ahorro energético del sector de la edificación, la Unión Europea en sus directivas enfatiza la necesidad de mejorar la eficiencia energética de los edificios. Añadiendo, además, la obligatoriedad de desarrollar edificios “energía casi nula”, cuyo prerrequisito es tener un muy alto rendimiento energético. En España, los edificios son responsables del 31% del consumo de energía primaria. La mayor parte de este consumo se relaciona a la utilización de sistemas activos de acondicionamiento. Una medida efectiva para reducir la demanda es mejorar la envolvente. Sin embargo, hay que buscar estrategias adicionales para aumentar aún más la eficiencia de los edificios nuevos y existentes. Para los climas de España, el uso de la inercia térmica ha probado ser una estrategia válida. Sin embargo, su funcionamiento está vinculado al peso y al volumen de los materiales utilizados. Esto limita sus posibilidades en la rehabilitación energética y en los nuevos edificios basados en la construcción ligera. Una alternativa es el uso de aplicaciones de almacenamiento térmico por calor latente, utilizando materiales de cambio de fase (PCM). Los PCM son sustancias con un muy alto calor de fusión, capaces de almacenar una gran cantidad de energía térmica sin requerir aumentos significativos de peso o volumen. Estas características los hacen idóneos para reducir el consumo relacionado con el acondicionamiento térmico, en edificios nuevos y existentes. En la parte preliminar de la investigación, se encontró que para lograr un aprovechamiento óptimo de las aplicaciones con PCM es necesario tener un conocimiento profundo de su funcionamiento y de las variables del sistema. De ahí que el objetivo principal de la presente tesis sea: establecer las bases para la optimizatión integral de las aplicaciones con almacenamiento de energía térmica por calor latente, identificando y validando sus variables más relevantes. La investigación consta de tres partes. La primera, documental, sistematizando y jerarquizando la información científica publicada; la segunda, numérica, basada en un análisis paramétrico de una aplicación con PCM, utilizando simulaciones térmicas; y la tercera, experimental, monitorizando el funcionamiento térmico y energético de diferentes aplicaciones con PCM en módulos a escala real. Los resultados brindan un más profundo entendimiento del funcionamiento de las aplicaciones evaluadas. Han permitido identificar sus variables relevantes, cuantificar su influencia, y determinar condiciones óptimas para su utilización así como situaciones en las que sería muy difícil justificar su uso. En el proceso, se realizó la caracterización térmica y energética de aplicaciones con PCM, tanto opacas como traslúcidas. Además, se ha encontrado que las aplicaciones con PCM son capaces de aumentar la eficiencia energética inclusive en recintos con diseños optimizados, demostrando ser una de las estrategias adecuadas para lograr el muy alto desempeño energético requerido en los edificios energía nula. ABSTRACT The main motivation for choosing the theme of the thesis is our energy and environmental reality. And more specifically, the urgent need to respond to this reality from the building sector. This is why, the work start with the search of passive solutions that help reduce energy consumption and C02 emissions of buildings, in both new and existing ones. The object of study is innovative applications based on the use of responsive materials, with bidirectional thermal memory. Energy is an essential element for development. However, the predominant energy model, based primarily on the use of fossil fuels, is one of the major responsible for the environmental deterioration of the planet, the cause of most of the CO2 emissions. Furthermore, reserves of fossil fuels are limited and are concentrated in a few regions of the world, which creates issues related to dependency, competitiveness, and security of supply. Given the large potential for energy savings in the building sector, the European Union in its directives emphasizes the need to improve energy efficiency in buildings. Also, adding the obligation to develop "nearly zero energy" buildings, whose first prerequisite is to achieve a very high energy efficiency. In Spain, buildings are responsible for 31% of primary energy consumption and most of this consumption is related to the used of HVAC systems. One of the most effective measures to reduce demand is to improve the envelope. However, it is necessary to look for additional strategies to further increase the efficiency of new and existing buildings. For the predominant climates in Spain, use of the thermal inertia may be a valid strategy. Nevertheless, its operation is linked to weight and volume of the materials used. This limits their possibilities in the existing buildings energy retrofitting and in the new buildings based on lightweight construction. An alternative is the use of latent heat thermal energy storage applications (LHTES), using phase change materials (PCM). PCM are substances with a high heat of fusion, capable of storing a large amount of thermal energy without requiring significant increases in weight or volume. These features make them ideal for reducing energy consumption associated with thermal conditioning in both new and existing buildings. In the preliminary part of the investigation, it was found that to get optimum utilization of the PCM applications is needed to have a deep understanding of its operation and, in particular, how the system variables affect its performance. Hence, the main objective of this thesis is: to establish the basis for the integral optimization of applications with latent heat thermal energy storage, identifying and validating the most relevant variables. The research comprises of three parts. The first, documentary, systematizing and prioritizing published scientific information. The second, numeric, based on a parametric analysis of an application PCM using thermal simulations. The third, experimental, monitoring the thermal and energy performance of different applications with PCM on real scale test cells. The results provide a complete understanding of the functioning of the evaluated LHTES application. They have allowed to identify their relevant variables, quantify their influence and determine optimum conditions for use as well as situations where it would be very difficult to justify its use. In the process, it was carried out the power and thermal characterization of various opaque and translucent PCM applications. Furthermore, it has been found that applications with PCM can increase the energy efficiency, even in buildings with optimized designs; proving to be one of the appropriate measures to achieve the high energy performance required in zero energy buildings.
Resumo:
The design of a Ku-band reconfigurable reflectarray antenna for emergency satellite communications is presented. Bidirectional high data rate satellite links are needed in emergency conditions where other telecommunication infrastructures are not available. In order to operate in this type of scenario, an antenna should be deployable, transportable, and easily repointable. The need of an automatic and fast satellite location and pointing system leads to a completely electronic reconfigurable antenna. The operative bandwidth is from 10.7 to 12.5 GHz for reception and from 14 up to 14.5 GHz for transmission (30% of relative bandwidth). The selected antenna architecture is based on a dual reflectarray system comprising a passive subreflectarray and an active main reflectarray made of reconfigurable 1-bit elementary cells based on PIN diodes.
Resumo:
La tesis doctoral se centra en la posibilidad de entender que la práctica de arquitectura puede encontrar en las prácticas comunicativas un apoyo instrumental, que sobrepasa cualquier simplificación clásica del uso de los medios como una mera aplicación superficial, post-producida o sencillamente promocional. A partir de esta premisa se exponen casos del último cuarto del siglo XX y se detecta que amenazas como el riesgo de la banalización, la posible saturación de la imagen pública o la previsible asociación incorrecta con otros individuos en presentaciones grupales o por temáticas, han podido influir en un crecimiento notable de la adquisición de control, por parte de los arquitectos, en sus oportunidades mediáticas. Esto es, como si la arquitectura hubiera empezado a superar y optimizar algo inevitable, que las fórmulas expositivas y las publicaciones, o más bien del exponer(se) y publicar(se), son herramientas disponibles para activar algún tipo de gestión intelectual de la comunicación e información circulante sobre si misma. Esta práctica de “autoedición” se analiza en un periodo concreto de la trayectoria de OMA -Office for Metropolitan Architecture-, estudio considerado pionero en el uso eficiente, oportunista y personalizado de los medios. Así, la segunda parte de la tesis se ocupa del análisis de su conocida monografía S,M,L,XL (1995), un volumen que contó con gran participación por parte de sus protagonistas durante la edición, y de cuyo proceso de producción apenas se había investigado. Esta publicación señaló un punto de inflexión en su género alterando todo formato y restricciones anteriores, y se ha convertido en un volumen emblemático para la disciplina que ninguna réplica posterior ha podido superar. Aquí se presenta a su vez como el desencadenante de la construcción de un “gran evento” que concluye en la transformación de la identidad de OMA en 10 años, paradójicamente entre el nacimiento de la Fundación Groszstadt y el arranque de la actividad de AMO, dos entidades paralelas clave anexas a OMA. Este planteamiento deviene de cómo la investigación desvela que S,M,L,XL es una pieza más, central pero no independiente, dentro de una suma de acciones e individuos, así como otras publicaciones, exposiciones, eventos y también artículos ensayados y proyectos, en particular Bigness, Generic City, Euralille y los concursos de 1989. Son significativos aspectos como la apertura a una autoría múltiple, encabezada por Rem Koolhaas y el diseñador gráfico Bruce Mau, acompañados en los agradecimientos de la editora Jennifer Sigler y cerca de una centena de nombres, cuyas aportaciones no necesariamente se basan en la construcción de fragmentos del libro. La supresión de ciertos límites permite superar también las tareas inicialmente relevantes en la edición de una publicación. Un objetivo general de la tesis es también la reflexión sobre relaciones anteriormente cuestionadas, como la establecida entre la arquitectura y los mercados o la economía. Tomando como punto de partida la idea de “design intelligence” sugerida por Michael Speaks (2001), se extrae de sus argumentos que lo esencial es el hallazgo de la singularidad o inteligencia propia de cada estudio de arquitectura o diseño. Asimismo se explora si en la construcción de ese tipo de fórmulas magistrales se alojaban también combinaciones de interés y productivas entre asuntos como la eficiencia y la creatividad, o la organización y las ideas. En esta dinámica de relaciones bidireccionales, y en ese presente de exceso de información, se fundamenta la propuesta de una equivalencia más evidenciada entre la “socialización” del trabajo del arquitecto, al compartirlo públicamente e introducir nuevas conversaciones, y la relación inversa a partir del trabajo sobre la “socialización” misma. Como si la consciencia sobre el uso de los medios pudiera ser efectivamente instrumental, y contribuir al desarrollo de la práctica de arquitectura, desde una perspectiva idealmente comprometida e intelectual. ABSTRACT The dissertation argues the possibility to understand that the practice of architecture can find an instrumental support in the practices of communication, overcoming any classical simplification of the use of media, generally reduced to superficial treatments or promotional efforts. Thus some cases of the last decades of the 20th century are presented. Some threats detected, such as the risk of triviality, the saturation of the public image or the foreseeable wrong association among individuals when they are introduced as part of thematic groups, might have encouraged a noticeable increase of command taken by architects when there is chance to intervene in a media environment. In other words, it can be argued that architecture has started to overcome and optimize the inevitable, the fact that exhibition formulas and publications, or simply the practice of (self)exhibition or (self)publication, are tools at our disposal for the activation of any kind of intellectual management of communication and circulating information about itself. This practice of “self-edition” is analyzed in a specific timeframe of OMA’s trajectory, an office that is considered as a ground-breaking actor in the efficient and opportunistic use of media. Then the second part of the thesis dissects their monograph S,M,L,XL (1995), a volume in which its main characters were deeply involved in terms of edition and design, a process barely analyzed up to now. This publication marked a turning point in its own genre, disrupting old formats and traditional restrictions. It became such an emblematic volume for the discipline that none of the following attempts of replica has ever been able to improve this precedent. Here, the book is also presented as the element that triggers the construction of a “big event” that concludes in the transformation of OMA identity in 10 years. Paradoxically, between the birth of the Groszstadt Foundation and the early steps of AMO, both two entities parallel and connected to OMA. This positions emerge from how the research unveils that S,M,L,XL is one more piece, a key one but not an unrelated element, within a sum of actions and individuals, as well as other publications, exhibitions, articles and projects, in particular Bigness, Generic City, Euralille and the competitions of 1989. Among the remarkable innovations of the monograph, there is an outstanding openness to a regime of multiple authorship, headed by Rem Koolhaas and the graphic designer Bruce Mau, who share the acknowledgements page with the editor, Jennifer Sigler, and almost 100 people, not necessarily responsible for specific fragments of the book. In this respect, the dissolution of certain limits made possible that the expected tasks in the edition of a publication could be trespassed. A general goal of the thesis is also to open a debate on typically questioned relations, particularly between architecture and markets or economy. Using the idea of “design intelligence”, outlined by Michael Speaks in 2001, the thesis pulls out its essence, basically the interest in detecting the singularity, or particular intelligence of every office of architecture and design. Then it explores if in the construction of this kind of ingenious formulas one could find interesting and useful combinations among issues like efficiency and creativity, or organization and ideas. This dynamic of bidirectional relations, rescued urgently at this present moment of excess of information, is based on the proposal for a more evident equivalence between the “socialization” of the work in architecture, anytime it is shared in public, and the opposite concept, the work on the proper act of “socialization” itself. As if a new awareness of the capacities of the use of media could turn it into an instrumental force, capable of contributing to the development of the practice of architecture, from an ideally committed and intelectual perspective.
Resumo:
Coincidence detection is important for functions as diverse as Hebbian learning, binaural localization, and visual attention. We show here that extremely precise coincidence detection is a natural consequence of the normal function of rectifying electrical synapses. Such synapses open to bidirectional current flow when presynaptic cells depolarize relative to their postsynaptic targets and remain open until well after completion of presynaptic spikes. When multiple input neurons fire simultaneously, the synaptic currents sum effectively and produce a large excitatory postsynaptic potential. However, when some inputs are delayed relative to the rest, their contributions are reduced because the early excitatory postsynaptic potential retards the opening of additional voltage-sensitive synapses, and the late synaptic currents are shunted by already opened junctions. These mechanisms account for the ability of the lateral giant neurons of crayfish to sum synchronous inputs, but not inputs separated by only 100 μsec. This coincidence detection enables crayfish to produce reflex escape responses only to very abrupt mechanical stimuli. In light of recent evidence that electrical synapses are common in the mammalian central nervous system, the mechanisms of coincidence detection described here may be widely used in many systems.
Resumo:
Fast axonal transport is characterized by the bidirectional, microtubule-based movement of membranous organelles. Cytoplasmic dynein is necessary but not sufficient for retrograde transport directed from the synapse to the cell body. Dynactin is a heteromultimeric protein complex, enriched in neurons, that binds to both microtubules and cytoplasmic dynein. To determine whether dynactin is required for retrograde axonal transport, we examined the effects of anti-dynactin antibodies on organelle transport in extruded axoplasm. Treatment of axoplasm with antibodies to the p150Glued subunit of dynactin resulted in a significant decrease in the velocity of microtubule-based organelle transport, with many organelles bound along microtubules. We examined the molecular mechanism of the observed inhibition of motility, and we demonstrated that antibodies to p150Glued disrupted the binding of cytoplasmic dynein to dynactin and also inhibited the association of cytoplasmic dynein with organelles. In contrast, the anti-p150Glued antibodies had no effect on the binding of dynactin to microtubules nor on cytoplasmic dynein-driven microtubule gliding. These results indicate that the interaction between cytoplasmic dynein and the dynactin complex is required for the axonal transport of membrane-bound vesicles and support the hypothesis that dynactin may function as a link between the organelle, the microtubule, and cytoplasmic dynein during vesicle transport.
Resumo:
Anchorage and growth factor independence are cardinal features of the transformed phenotype. Although it is logical that the two pathways must be coregulated in normal tissues to maintain homeostasis, this has not been demonstrated directly. We showed previously that down-modulation of β1-integrin signaling reverted the malignant behavior of a human breast tumor cell line (T4–2) derived from phenotypically normal cells (HMT-3522) and led to growth arrest in a three-dimensional (3D) basement membrane assay in which the cells formed tissue-like acini (14). Here, we show that there is a bidirectional cross-modulation of β1-integrin and epidermal growth factor receptor (EGFR) signaling via the mitogen-activated protein kinase (MAPK) pathway. The reciprocal modulation does not occur in monolayer (2D) cultures. Antibody-mediated inhibition of either of these receptors in the tumor cells, or inhibition of MAPK kinase, induced a concomitant down-regulation of both receptors, followed by growth-arrest and restoration of normal breast tissue morphogenesis. Cross-modulation and tissue morphogenesis were associated with attenuation of EGF-induced transient MAPK activation. To specifically test EGFR and β1-integrin interdependency, EGFR was overexpressed in nonmalignant cells, leading to disruption of morphogenesis and a compensatory up-regulation of β1-integrin expression, again only in 3D. Our results indicate that when breast cells are spatially organized as a result of contact with basement membrane, the signaling pathways become coupled and bidirectional. They further explain why breast cells fail to differentiate in monolayer cultures in which these events are mostly uncoupled. Moreover, in a subset of tumor cells in which these pathways are misregulated but functional, the cells could be “normalized” by manipulating either pathway.
Resumo:
The androgen receptor (AR) binds to androgen response elements and regulates target genes via a mechanism involving coregulators. Here we demonstrate that the AR can interact with the testicular orphan receptor-4 (TR4) and function as a repressor to down-regulate the TR4 target genes by preventing the TR4 binding to its target DNA. Interestingly, the heterodimerization of AR and TR4 also allows TR4 to repress AR target gene expression. Simultaneous exposure to both receptors therefore could result in bidirectional suppression of their target genes. Together, these data demonstrate that the coupling of two different receptors, through the heterodimerization of AR and TR4, is a unique signaling pathway in the steroid receptor superfamily, which may facilitate further understanding of the complicated androgen action in prostate cancer or libido.
Resumo:
Rad is the prototypic member of a new class of Ras-related GTPases. Purification of the GTPase-activating protein (GAP) for Rad revealed nm23, a putative tumor metastasis suppressor and a development gene in Drosophila. Antibodies against nm23 depleted Rad-GAP activity from human skeletal muscle cytosol, and bacterially expressed nm23 reconstituted the activity. The GAP activity of nm23 was specific for Rad, was absent with the S105N putative dominant negative mutant of Rad, and was reduced with mutations of nm23. In the presence of ATP, GDP⋅Rad was also reconverted to GTP⋅Rad by the nucleoside diphosphate (NDP) kinase activity of nm23. Simultaneously, Rad regulated nm23 by enhancing its NDP kinase activity and decreasing its autophosphorylation. Melanoma cells transfected with wild-type Rad, but not the S105N-Rad, showed enhanced DNA synthesis in response to serum; this effect was lost with coexpression of nm23. Thus, the interaction of nm23 and Rad provides a potential novel mechanism for bidirectional, bimolecular regulation in which nm23 stimulates both GTP hydrolysis and GTP loading of Rad whereas Rad regulates activity of nm23. This interaction may play important roles in the effects of Rad on glucose metabolism and the effects of nm23 on tumor metastasis and developmental regulation.