Hand-held spectroscopic device for in vivo and intraoperative tumor detection: contrast enhancement, detection sensitivity, and tissue penetration.

Surgery is one of the most effective and widely used procedures in treating human cancers, but a major problem is that the surgeon often fails to remove the entire tumor, leaving behind tumor-positive margins, metastatic lymph nodes, and/or satellite tumor nodules. Here we report the use of a hand-held spectroscopic pen device (termed SpectroPen) and near-infrared contrast agents for intraoperative detection of malignant tumors, based on wavelength-resolved measurements of fluorescence and surface-enhanced Raman scattering (SERS) signals. The SpectroPen utilizes a near-infrared diode laser (emitting at 785 nm) coupled to a compact head unit for light excitation and collection. This pen-shaped device effectively removes silica Raman peaks from the fiber optics and attenuates the reflected excitation light, allowing sensitive analysis of both fluorescence and Raman signals. Its overall performance has been evaluated by using a fluorescent contrast agent (indocyanine green, or ICG) as well as a surface-enhanced Raman scattering (SERS) contrast agent (pegylated colloidal gold). Under in vitro conditions, the detection limits are approximately 2-5 × 10(-11) M for the indocyanine dye and 0.5-1 × 10(-13) M for the SERS contrast agent. Ex vivo tissue penetration data show attenuated but resolvable fluorescence and Raman signals when the contrast agents are buried 5-10 mm deep in fresh animal tissues. In vivo studies using mice bearing bioluminescent 4T1 breast tumors further demonstrate that the tumor borders can be precisely detected preoperatively and intraoperatively, and that the contrast signals are strongly correlated with tumor bioluminescence. After surgery, the SpectroPen device permits further evaluation of both positive and negative tumor margins around the surgical cavity, raising new possibilities for real-time tumor detection and image-guided surgery.

Biological and ecological mechanisms supporting marine self-governance: The Seri Callo de Hacha Fishery in Mexico

My goal was to describe how biological and ecological factors give shape to fishing practices that can contribute to the successful self-governance of a small-scale fishing system in the Gulf of California, Mexico. The analysis was based on a comparison of the main ecological and biological indicators that fishers claim to use to govern their day-to-day decision making about fishing and data collected in situ. I found that certain indicators allow fishers to learn about differences and characteristics of the resource system and its units. Fishers use such information to guide their day-to-day fishing decisions. More importantly, these decisions appear unable to shape the reproductive viability of the fishery because no indicators were correlated to the reproductive cycle of the target species. As a result, the fishing practices constitute a number of mechanisms that might provide short-term buffering capacity against perturbations or stress factors that otherwise would threaten the overall sustainability and self-governance of the system. The particular biological circumstances that shape the harvesting practices might also act as a precursor of self-governance because they provide fishers with enough incentives to meet the costs of organizing the necessary rule structure that underlies a successful self-governance system.

Innovations in learning and teaching approaches using game technologies - can "The Movies" teach how to make a movie?

The use of games technology in education is not a new phenomenon. Even back in the days of 286 processors, PCs were used in some schools along with (what looks like now) primitive simulation software to teach a range of different skills and techniques – from basic programming using Logo (the turtle style car with a pen at the back that could be used to draw on the floor – always a good way of attracting the attention of school kids!) up to quite sophisticated replications of physical problems, such as working out the trajectory of a missile to blow up an enemies’ tank. So why are games not more widely used in education (especially in FE and HE)? Can they help to support learners even at this advanced stage in their education? We aim to provide in this article an overview of the use of game technologies in education (almost as a small literature review for interested parties) and then go more in depth into one particular example we aim to introduce from this coming academic year (Sept. 2006) to help with teaching and assessment of one area of our Multimedia curriculum. Of course, we will not be able to fully provide the reader with data on how successful this is but we will be running a blog (http://themoviesineducation.blogspot.com/) to keep interested parties up to date with the progress of the project and to hopefully help others to set up similar solutions themselves. We will also only consider a small element of the implementation here and cover how the use of such assessment processes could be used in a broader context. The use of a game to aid learning and improve achievement is suggested because traditional methods of engagement are currently failing on some levels. By this it is meant that various parts of the production process we normally cover in our Multimedia degree are becoming difficult to monitor and continually assess.

Contribution to the knowlegde of Galician xenoflora (NW Iberian Peninsula, Spain).

Information on 12 exotic plants of diverse interest for the Galician flora are presented. All of them were collected in Ribeira council (SW of the A Coruña province). The total includes 8 novelties at a regional level (Aeonium haworthii, Aloe mitriformis, Brugmansia × candida, Nephrolepis cordifolia, Osteospermum ecklonis, Pelargonium capitatum, Sedum mexicanum, Sparaxis tricolor), and 2 provincial novelties. In addition, information on two taxa hardly mentioned in the literature on Galician vascular flora is also included. All the cited specimens are deposited at the SANT Herbarium.

Processing characteristics and mechanical properties of metallocene catalyzed linear low-density polyethylene foams for rotational molding

The object of this work is to assess the suitability of metallocene catalyzed linear low-density polyethylenes for the rotational molding of foams and to link the material and processing conditions to cell morphology and part mechanical properties (flexural and compressive strength). Through adjustments to molding conditions, the significant processing and physical material parameters that optimize metallocene catalyzed linear low-density polyethylene foam structure have been identified. The results obtained from an equivalent conventional grade of Ziegler-Natta catalyzed linear low-density polyethylene are used as a basis for comparison. The key findings of this study are that metallocene catalyzed LLDPE can be used in rotational foam molding to produce a foam that will perform as well as a ZieglerNatta catalyzed foam and that foam density Is by far the most Influential factor over mechanical properties of foam. © 2004 Society of Plastics Engineers.

The first chronicle of Miguel Hernandez: The New Journalism (1936-1939)

This paper presents and analyzes the first literary-journalistic chronicle writen and published by Miguel Hernández: “Defensa de Madrid. Madrid y las ciudades de Retaguardia”, during the Spanish Civil War (1936-1939). This chronicle is the first one of a series establishing a new and personal type of journalism: literary chronicles –poetical and political-. Miguel Hernandez published his masterpieces in different newspapers as a war reporter, with his own name and with a pen-name, playing roles of director and political commissar in different newspapers in the war-trenches. Thematically, this first article shows his personal and political engagement, as well as his desire and strategy to protect the capital city of Spain: Madrid. Methodologically, the analysis is an approached to linguistics in social sciences, which presents some of the personal characteristics and style of the chronist Miguel Hernández. Thus, it becomes patent that the so-called New Journalism (narrative and literary), which flourished in the 70s, had already been deeply and efficiently practiced by Miguel Hernández 40 years before. That is the reason why Miguel Hernández deserves to be added to the well-known collective of chronicle writers that have already been rescued to this moment. His literary style and quality are installing him in a outstanding position as well as pioneer of the genre nowadays known as New Journalism that in his case, it is politically engaged

Do pigs form preferential associations?

This investigation examined whether pigs form long-term preferential associations or ‘friendships’ and factors that may influence the formation of these relationships. Thirty-three pigs from 16 litters were housed together from 4 weeks of age. At 10 weeks they were split into two groups of 16 and 17 pigs and each introduced into 3.05 m × 3.66 m observation pens (1st pen). At 17 weeks the two groups swapped pens (2nd pen). The lying patterns of each group were recorded over 3 weeks in both the 1st and 2nd pens. To identify dyads with preferential associations, association indices were calculated for each pair based on their lying patterns and analysed using SOCPROG1.3 and the permutation method [Whitehead, H., 1999. Programs for analysing social structure. SOCPROG 1.2, http://is.dal.cal/~whitelab/index.htm]. Dyads with high association indices for at least 2 out of 3 weeks in either pen, i.e. =0.10 (twice the mean), were classed as having preferential associations. Mantel tests were used to examine the relationship between the relative sex, weight, familiarity and relatedness of a dyad and their level of association and to examine consistency of associations between pens. The existence of preferential associations was identified in both groups, since the standard deviations for the observed half-weight association index means were significantly higher than for the randomly permuted half-weight association index means (P < 0.001). Of the 33 pigs observed, 32 formed preferential associations with one or more pigs in their group, resulting in 50 dyads. Only six dyads (12 pigs) formed preferential associations in both pens, suggesting that the remaining dyads either formed short-term associations only or were simply displaying a shared preference for the same lying location. Levels of association between pens showed no significant correlation. The relative sex, weight, familiarity and relatedness of dyad members also showed no significant correlation with their level of association. These findings suggest that unrelated pigs are capable of forming preferential associations. However, it is unclear whether such associations are widespread or important to pigs, since most dyads’ preferential associations were not consistent between pens.

The role of plug design in determining wall thickness distribution in thermoforming

An experimental investigation has been carried out into the effects of changes in plug design on the wall thickness distribution of thermoformed products. Plugs were machined with a series of geometrical variations and their effects on the process were measured. The overall results show that the plug has a crucial role in controlling the wall thickness distribution in thermoforming. Larger plugs tend to distribute more material to the base of the product, but the introduction of a small sidewall taper, base radius, or a reduction in plug diameter tend to lead to more balanced distributions. However, larger changes in any of the variables tend to destroy these benefits. It has also been demonstrated that the frictional and thermal properties of the plug are important in determining the deformation response of the sheet material. There is a clear evidence of slip in the sheet during plug contact and, although the cooling effect of the plug appears to be minimal, cooling in the highly deformed regions away from the plug appears to be a significant factor.

Role of conformational constraints of position 7 of the disulphide bridge of h-alpha-CGRP derivatives in their agonist versus antagonist properties

Previous structure-activity studies have shown that the disulphide bridge of calcitonin gene-related peptide (CGRP) is important for the highly potent, CGRP receptor-mediated effects of this peptide. In this study penicillamine (Pen) was substituted for one or both of the cysteinyl residues to determine conformational and topographical properties of the disulphide bridge favourable for binding to CGRP receptors and/or receptor activation. Pen constrains the conformational flexibility of disulphide bridges in other peptides. Binding affinities were measured using a radioligand binding assay with membranes prepared from pig coronary arteries and I-125-h-alpha-CGRP. Functional effects were characterized using a previously reported pig coronary artery relaxation bioassay. The binding affinity of [Pen(2)]h-alpha-CGRP was not significantly different from that of h-alpha-CGRP. All other analogues showed reduced affinity for CGRP receptors. [Pen(2)]h-alpha-CGRP also caused relaxation of coronary arteries. The remaining analogues either caused relaxation with significantly reduced potency or failed to relax the arteries at concentrations up to 1 x 10(-5) M. All analogues that did not relax coronary arteries contained a D-Pen in position 7 and inhibited CGRP-induced relaxation. [D-Pen(2,7)]h-alpha- CGRP was the most potent antagonist with a K-B value of 630 nM. This affinity is similar to that of the classical CGRP receptor antagonist, h-alpha-CGRP(8-37), on these arteries (K-B, 212 nM). These studies show that modifying the topography of the disulphide bridge can cause large and variable effects on ligand binding and activation of CGRP receptors. The contribution of position 7 to the conformation and topography of the disulphide bridge of h-alpha-CGRP is crucial to the future design of agonists of CGRP receptors. Furthermore, position 7 is important for the development of new CGRP receptor antagonists with structures based on the whole sequence of h-alpha-CGRP.

The Role of Process Parameters in Determining Wall Thickness Distribution in Plug-Assisted Thermoforming

This article describes the results of a comprehensive investigation to determine the link between process parameters and observed wall thickness output for the plug-assisted thermoforming process. The overall objective of the work was to systematically investigate the process parameters that may be adjusted during production to control the wall thickness distribution of parts manufactured by plug-assisted thermoforming. The parameters investigated were the sheet temperature, plug temperature, plug speed, plug displacement, plug shape, and air pressure. As well as quantifying the effects of each parameter on the wall thickness distribution, a further aim of the work was to improve the understanding of the physical mechanisms of deformation of the sheet during the different stages of the process. The process parameters shown to have the greatest effect on experimentally determined wall thickness distribution were the plug displacement, sheet temperature, plug temperature, and plug shape. It is proposed that during the plug-assisted thermoforming of polystyrene the temperature dependent friction between the plug and sheet surface was the most important factor in determining product wall thickness distribution, whereas heat transfer was shown to play a less important role. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers

Validating Injection Stretch-Blow Molding Simulation Through Free Blow Trials

A 2D isothermal finite element simulation of the injection stretch-blow molding (ISBM) process for polyethylene terephthalate (PET) containers has been developed through the commercial finite element package ABAQUS/standard. In this work, the blowing air to inflate the PET preform was modeled through two different approaches: a direct pressure input (as measured in the blowing machine) and a constant mass flow rate input (based on a pressure-volume-time relationship). The results from these two approaches were validated against free blow and free stretch-blow experiments, which were instrumented and monitored through high-speed video. Results show that simulation using a constant mass flow rate approach gave a better prediction of volume vs. time curve and preform shape evolution when compared with the direct pressure approach and hence is more appropriate in modeling the preblowing stage in the injection stretch-blow molding process