Effects of mercury on the arterial blood pressure of anesthetized rats

The available data suggests that hypotension caused by Hg2+ administration may be produced by a reduction of cardiac contractility or by cholinergic mechanisms. The hemodynamic effects of an intravenous injection of HgCl2 (5 mg/kg) were studied in anesthetized rats (N = 12) by monitoring left and right ventricular (LV and RV) systolic and diastolic pressures for 120 min. After HgCl2 administration the LV systolic pressure decreased only after 40 min (99 ± 3.3 to 85 ± 8.8 mmHg at 80 min). However, RV systolic pressure increased, initially slowly but faster after 30 min (25 ± 1.8 to 42 ± 1.6 mmHg at 80 min). Both right and left diastolic pressures increased after HgCl2 treatment, suggesting the development of diastolic ventricular dysfunction. Since HgCl2 could be increasing pulmonary vascular resistance, isolated lungs (N = 10) were perfused for 80 min with Krebs solution (continuous flow of 10 ml/min) containing or not 5 µM HgCl2. A continuous increase in pulmonary vascular resistance was observed, suggesting the direct effect of Hg2+ on the pulmonary vessels (12 ± 0.4 to 29 ± 3.2 mmHg at 30 min). To examine the interactions of Hg2+ and changes in cholinergic activity we analyzed the effects of acetylcholine (Ach) on mean arterial blood pressure (ABP) in anesthetized rats (N = 9) before and after Hg2+ treatment (5 mg/kg). Using the same amount and route used to study the hemodynamic effects we also examined the effects of Hg2+ administration on heart and plasma cholinesterase activity (N = 10). The in vivo hypotensive response to Ach (0.035 to 10.5 µg) was reduced after Hg2+ treatment. Cholinesterase activity (µM h-1 mg protein-1) increased in heart and plasma (32 and 65%, respectively) after Hg2+ treatment. In conclusion, the reduction in ABP produced by Hg2+ is not dependent on a putative increase in cholinergic activity. HgCl2 mainly affects cardiac function. The increased pulmonary vascular resistance and cardiac failure due to diastolic dysfunction of both ventricles are factors that might contribute to the reduction of cardiac output and the fall in arterial pressure.

Influence of renal denervation on blood pressure, sodium and water excretion in acute total obstructive apnea in rats

Obstructive apnea (OA) can exert significant effects on renal sympathetic nerve activity (RSNA) and hemodynamic parameters. The present study focuses on the modulatory actions of RSNA on OA-induced sodium and water retention. The experiments were performed in renal-denervated rats (D; N = 9), which were compared to sham (S; N = 9) rats. Mean arterial pressure (MAP) and heart rate (HR) were assessed via an intrafemoral catheter. A catheter was inserted into the bladder for urinary measurements. OA episodes were induced via occlusion of the catheter inserted into the trachea. After an equilibration period, OA was induced for 20 s every 2 min and the changes in urine, MAP, HR and RSNA were recorded. Renal denervation did not alter resting MAP (S: 113 ± 4 vs D: 115 ± 4 mmHg) or HR (S: 340 ± 12 vs D: 368 ± 11 bpm). An OA episode resulted in decreased HR and MAP in both groups, but D rats showed exacerbated hypotension and attenuated bradycardia (S: -12 ± 1 mmHg and -16 ± 2 bpm vs D: -16 ± 1 mmHg and 9 ± 2 bpm; P < 0.01). The basal urinary parameters did not change during or after OA in S rats. However, D rats showed significant increases both during and after OA. Renal sympathetic nerve activity in S rats increased (34 ± 9%) during apnea episodes. These results indicate that renal denervation induces elevations of sodium content and urine volume and alters bradycardia and hypotension patterns during total OA in unconscious rats.

Transitory increased blood pressure after upper airway surgery for snoring and sleep apnea correlates with the apnea-hypopnea respiratory disturbance index

A transitory increase in blood pressure (BP) is observed following upper airway surgery for obstructive sleep apnea syndrome but the mechanisms implicated are not yet well understood. The objective of the present study was to evaluate changes in BP and heart rate (HR) and putative factors after uvulopalatopharyngoplasty and septoplasty in normotensive snorers. Patients (N = 10) were instrumented for 24-h ambulatory BP monitoring, nocturnal respiratory monitoring and urinary catecholamine level evaluation one day before surgery and on the day of surgery. The influence of postsurgery pain was prevented by analgesic therapy as confirmed using a visual analog scale of pain. Compared with preoperative values, there was a significant (P < 0.05) increase in nighttime but not daytime systolic BP (119 ± 5 vs 107 ± 3 mmHg), diastolic BP (72 ± 4 vs 67 ± 2 mmHg), HR (67 ± 4 vs 57 ± 2 bpm), respiratory disturbance index (RDI) characterized by apnea-hypopnea (30 ± 10 vs 13 ± 4 events/h of sleep) and norepinephrine levels (22.0 ± 4.7 vs 11.0 ± 1.3 µg l-1 12 h-1) after surgery. A positive correlation was found between individual variations of BP and individual variations of RDI (r = 0.81, P < 0.01) but not between BP or RDI and catecholamines. The visual analog scale of pain showed similar stress levels on the day before and after surgery (6.0 ± 0.8 vs 5.0 ± 0.9 cm, respectively). These data strongly suggest that the cardiovascular changes observed in patients who underwent uvulopalatopharyngoplasty and septoplasty were due to the increased postoperative RDI.

Ambulatory blood pressure and Doppler echocardiographic indexes of borderline hypertensive men presenting an exaggerated blood pressure response during dynamic exercise

Borderline hypertension (BH) has been associated with an exaggerated blood pressure (BP) response during laboratory stressors. However, the incidence of target organ damage in this condition and its relation to BP hyperreactivity is an unsettled issue. Thus, we assessed the Doppler echocardiographic profile of a group of BH men (N = 36) according to office BP measurements with exaggerated BP in the cycloergometric test. A group of normotensive men (NT, N = 36) with a normal BP response during the cycloergometric test was used as control. To assess vascular function and reactivity, all subjects were submitted to the cold pressor test. Before Doppler echocardiography, the BP profile of all subjects was evaluated by 24-h ambulatory BP monitoring. All subjects from the NT group presented normal monitored levels of BP. In contrast, 19 subjects from the original BH group presented normal monitored BP levels and 17 presented elevated monitored BP levels. In the NT group all Doppler echocardiographic indexes were normal. All subjects from the original BH group presented normal left ventricular mass and geometrical pattern. However, in the subjects with elevated monitored BP levels, fractional shortening was greater, isovolumetric relaxation time longer, and early to late flow velocity ratio was reduced in relation to subjects from the original BH group with normal monitored BP levels (P<0.05). These subjects also presented an exaggerated BP response during the cold pressor test. These results support the notion of an integrated pattern of cardiac and vascular adaptation during the development of hypertension.

Diverse effects of renal denervation on ventricular hypertrophy and blood pressure in DOCA-salt hypertensive rats

Cardiac hypertrophy that accompanies hypertension seems to be a phenomenon of multifactorial origin whose development does not seem to depend on an increased pressure load alone, but also on local growth factors and cardioadrenergic activity. The aim of the present study was to determine if sympathetic renal denervation and its effects on arterial pressure level can prevent cardiac hypertrophy and if it can also delay the onset and attenuate the severity of deoxycorticosterone acetate (DOCA)-salt hypertension. DOCA-salt treatment was initiated in rats seven days after uninephrectomy and contralateral renal denervation or sham renal denervation. DOCA (15 mg/kg, sc) or vehicle (soybean oil, 0.25 ml per animal) was administered twice a week for two weeks. Rats treated with DOCA or vehicle (control) were provided drinking water containing 1% NaCl and 0.03% KCl. At the end of the treatment period, mean arterial pressure (MAP) and heart rate measurements were made in conscious animals. Under ether anesthesia, the heart was removed and the right and left ventricles (including the septum) were separated and weighed. DOCA-salt treatment produced a significant increase in left ventricular weight/body weight (LVW/BW) ratio (2.44 ± 0.09 mg/g) and right ventricular weight/body weight (RVW/BW) ratio (0.53 ± 0.01 mg/g) compared to control (1.92 ± 0.04 and 0.48 ± 0.01 mg/g, respectively) rats. MAP was significantly higher (39%) in DOCA-salt rats. Renal denervation prevented (P>0.05) the development of hypertension in DOCA-salt rats but did not prevent the increase in LVW/BW (2.27 ± 0.03 mg/g) and RVW/BW (0.52 ± 0.01 mg/g). We have shown that the increase in arterial pressure level is not responsible for cardiac hypertrophy, which may be more related to other events associated with DOCA-salt hypertension, such as an increase in cardiac sympathetic activity.

Neural reflex regulation of arterial pressure in pathophysiological conditions : interplay among the baroreflex, the cardiopulmonary reflexes and the chemoreflex

The maintenance of arterial pressure at levels adequate to perfuse the tissues is a basic requirement for the constancy of the internal environment and survival. The objective of the present review was to provide information about the basic reflex mechanisms that are responsible for the moment-to-moment regulation of the cardiovascular system. We demonstrate that this control is largely provided by the action of arterial and non-arterial reflexes that detect and correct changes in arterial pressure (baroreflex), blood volume or chemical composition (mechano- and chemosensitive cardiopulmonary reflexes), and changes in blood-gas composition (chemoreceptor reflex). The importance of the integration of these cardiovascular reflexes is well understood and it is clear that processing mainly occurs in the nucleus tractus solitarii, although the mechanism is poorly understood. There are several indications that the interactions of baroreflex, chemoreflex and Bezold-Jarisch reflex inputs, and the central nervous system control the activity of autonomic preganglionic neurons through parallel afferent and efferent pathways to achieve cardiovascular homeostasis. It is surprising that so little appears in the literature about the integration of these neural reflexes in cardiovascular function. Thus, our purpose was to review the interplay between peripheral neural reflex mechanisms of arterial blood pressure and blood volume regulation in physiological and pathophysiological states. Special emphasis is placed on the experimental model of arterial hypertension induced by N-nitro-L-arginine methyl ester (L-NAME) in which the interplay of these three reflexes is demonstrable.

Intraocular pressure measurement in sheep using an applanation tonometer

The purpose of this study was to evaluate and establish the mean values of IOP in healthy adult sheep using an applanation tonometer. Information on age, sex, and breed was obtained for all animals included in this study. Twenty five healthy sheep (Ovis aries), of the same breed (Texel), male or female, with three years of age, received an ophthalmic examination in both eyes, including pupillary reflexes, Schirmer tear test, slit lamp biomicroscopy, and fluorescein staining. For all ophthalmic testing, animals were gently physically restrained, with no pressure in the jugular area and the eyelids were carefully open. IOP was measured by applanation tonometry (Tonopen XL). The same examiner performed the tonometry; measurements were taken three times for each eye, and their average was recorded as the IOP of the animal. Statistical analysis was performed using paired t-test and values of P < 0.05 were considered significant. The mean intraocular pressure in the whole group of 50 eyes was of 16.36 +/- 2.19 mm Hg. The mean (SD) IOP in the right eye was of 15.96 +/- 2.02 mm Hg, while the mean (SD) IOP in the left eye was of 16.76 +/- 2.32 mm Hg. Significant differences in IOP were not found between right and left eyes. The applanation tonometer was adequate for measuring the intraocular pressure in sheep. Reference data will assist in diagnosing testing for ophthalmic disease in sheep, as¹ well as promote further studies in this area.

On the Problem of Balancing the DC Capacitor Voltage Divider in Back-to-Back Multilevel Converters

This paper presents a new generalized solution for DC bus capacitors voltage balancing in back-to-back m level diode-clamped multilevel converters connecting AC networks. The solution is based on the DC bus average power flow and exploits the switching configuration redundancies. The proposed balancing solution is particularized for the back-to-back multilevel structure with m=5 levels. This back-to-back converter is studied working with bidirectional power flow, connecting an induction machine to the power grid.

Wells turbine: fiberglass flanges

A introdução desta tese começa por realizar um enquadramento do projecto em mão, apresentando a central de energia das ondas em que se encontram os componentes em fibra de vidro a projectar. Esta central usa o princípio de variação de coluna de água, e encontra-se localizada na ilha do Pico, Açores. São de seguida apresentados os objectivos deste trabalho, que consistem na selecção de materiais de fabrico dos componentes, desenvolvimento de uma metodologia para projectar juntas aparafusadas em materiais compósitos, dimensionamento e comparação de duas juntas concorrentes em materiais compósitos: junta solicitada à tracção e junta solicitada ao corte, validação da análise e estudo das causas dos vários tipos de falha destas juntas. A parte I deste trabalho é o resultado da pesquisa bibliográfica efectuada para levar a cabo os objectivos definidos. Assim, começa por se fazer uma descrição dos materiais e processos de fabrico que mais se adequam ao presente projecto, nomeadamente fibra de vidro, resinas, tecidos, impregnação manual, RTM e infusão por vácuo. Daqui resultou que os materiais mais adequados para esta aplicação são fibra de vidro do tipo E e resina polyester devido ao seu baixo custo e larga utilização em aplicações estruturais marinhas. O processo de fabrico mais eficiente é a infusão por vácuo devido á sua vocação para pequenas séries de produção, a poupança que permite em termos de mão-de-obra, a complacência com normas de emissão de voláteis e as boas propriedades das partes produzidas. No capítulo II da parte I são discutidos os tópicos relacionados com juntas em materiais compósitos. Da pesquisa levada a cabo conclui-se que as grandes vantagens das juntas aparafusadas são a sua facilidade de montagem e desmontagem, facilidade de inspecção e capacidade de ligar quaisquer tipos de materiais. Quanto à furação de compósitos é importante referir a necessidade de utilizar ferramentas resistentes e parâmetros de maquinação que minimizem o dano infligido aos laminados. Isto é possível através da selecção de ferramentas com passos baixos que reduzam igualmente a dimensão do seu centro estático responsável pela força axial exercida sobre o laminado - principal factor causador de dano. Devem-se igualmente utilizar baixas velocidades de avanço e elevadas velocidades de rotação. É importante salientar a importância da realização de pré-furação, de utilização de um prato de suporte na superfície de saída do laminado e a existência de ferramentas especialmente concebidas para a furação de compósitos. Para detectar e quantificar o dano existente num furo destacam-se os métodos de inspecção ultrasónica e a radiografia. Quanto aos parâmetros que influenciaram o comportamento de juntas aparafusadas destacam-se os rácios largura/diâmetro, distância ao bordo/diâmetro, espessura/diâmetro, pré-tensão, fricção, sequência de empilhamento e respectivas proporções, dimensão das anilhas e folga entre o parafuso e o furo. A pesquisa efectuada visando metodologias de projecto fiáveis ditou a necessidade de utilizar métodos que permitiram determinar o parafuso mais carregado de uma junta, efectuar o cálculo de tensões no mesmo, e ainda métodos que permitam determinar a primeira falha que ocorre no laminado bem como a falha final no mesmo. O capítulo III da primeira parte descreve os métodos de análise de tensões necessários para as metodologias de projecto utilizadas. Aqui é apresentada a teoria clássica da laminação, um método para determinação do parafuso mais carregado, um método analítico baseado na teoria da elasticidade anisotrópica de um corpo e o método dos elementos finitos. O método para determinar o parafuso mais carregado - análise global - consiste num modelo bidimensional de elementos finitos em que 2 laminados coincidentes são modelados com elementos lineares de casca com 4 nós, sendo a extremidade de um laminado restringida em todos os graus de liberdade e a extremidade oposta do segundo laminado carregada com a carga pretendida. Os laminados são ligados através de elementos mola que simulam os parafusos, sendo a sua constante de rigidez previamente calculada para este fim. O método analítico modela o contacto assumindo uma distribuição de pressão cosinoidal ao longo de metade do furo, e é válido para laminados simétricos e quasi-isotrópicos. O método dos elementos finitos é o que mais factores permite ter em conta, sendo os modelos tridimensionais com um elemento por camada os que melhor modelam o estado de tensões experienciado por uma junta aparafusada em materiais compósitos. O tópico de análise de falha é abordado no capítulo 4 da primeira parte. Aqui são apresentados os resultados do world wide failure exercice que compara vários critérios de falha existentes até 2004, fazendo-se referência a desenvolvimentos recentes que têm ocorrido nesta área. O critério de Puck surge como aquele que permite previsões de falha mais exactas. O critério de falha de Hashin 3D foi o escolhido para o presente trabalho, devido à sua facilidade de implementação num modelo de elementos finitos, à sua capacidade para detectar modos de falha subcríticos e à sua utilização em trabalhos anteriores que apresentaram previsões de falha muito próximas dos dados experimentais. Também neste capítulo se apresentaram os vários tipos de falha de uma junta aparafusada em materiais compósitos, apresentando as causas de cada uma. Por fim, na última secção, apresenta-se o método de dano progressivo que se desenvolveu para prever a primeira falha final do laminado. Este é muito interessante tendo permitido previsões de falha muito próximas dos resultados experimentais em trabalhos anteriores. Este método é iterativo e encontra-se dividido em 3 passos: Análise de tensões, análise de falha utilizando o critério de Hashin 3D e degradação de propriedades, de acordo com o tipo de falha detectada. Para além dos passos referidos, existe ainda um quarto responsável pelo fim da análise que consiste na aferição da existência ou não de falha final e respectivo tipo de falha (por pressão de contacto, por tensão ou por esforços de corte). No capítulo V da primeira parte é apresentado o resultado de uma pesquisa das normas de teste necessárias para obter as propriedades dos materiais requeridas para a aplicação dos métodos descritos neste trabalho. A parte II deste trabalho consiste na aplicação dos métodos apresentados na parte I ao caso concreto em estudo. Os softwares Microsoft Excel, Matlab e ANSYS foram utilizados para este fim. A junta começa por ser dimensionada estimando a espessura necessária do componente e o número e características dos parafusos. De seguida foi feita uma análise global à flange em estudo determinando a força suportada pelo parafuso mais carregado. Após esta análise desenvolveu-se um modelo tridimensional de elementos finitos da zona em que se encontra o parafuso mais carregado, utilizando elementos sólidos lineares e isoparamétricos de 8 nós e uma malha gerada pelo método directo. Aplicou-se a este modelo o algoritmo de dano progressivo descrito na primeira parte. Começou por se incluir explicitamente o parafuso, anilhas, pré-tensão e a modelação dos vários contactos com fricção posteriormente simplificado o modelo restringindo radialmente os nós da porção carregada do furo, excluindo os factores mencionados inicialmente. Procurou-se validar o modelo utilizando o método de cálculo de tensões descrito na primeira parte, desenvolvendo um programa em Matlab para o efeito. Tal não foi possível tendo-se incluído a tentativa realizada em anexo. Para efeitos de dimensionamento, desenvolveu-se um modelo de elementos finitos de duas dimensões da junta em causa, utilizando elementos de casca lineares de quatro nós isoparamétricos com uma espessura unitária. Através da análise de tensões efectuada com este modelo, e utilizando um método combinado programado em linguagem paramétrica, foi possível dimensionar as duas juntas concorrentes pretendidas. Este método combinado consistiu no cálculo de tensões em pontos localizados sobre uma curva característica e utilização de um critério de falha quadrático para cálculo da espessura necessária para a junta. O dimensionamento ditou que a junta solicitada à tensão necessita de pelo menos 127% das camadas e do custo de uma junta solicitada ao corte equivalente.

Academic dishonesty: understanding how undergraduate students think and act

The purpose of this investigation is to explore and understand the justifications given by students to the existence of dishonest behavior and understanding the extent to which the justifications given might influence denouncing and cheating behavior. 1277 undergraduate students of two Portuguese Public Universities were surveyed about their own cheating behavior, their propensity to denounce and the ―neutralizing attitudes‖. As predicted, ―neutralizing attitudes‖ was negatively correlated with self cheating behavior and positively correlated with reporting. The likelihood of copying is greater when the purpose is ―helping a friend‖, ―when the courses are more difficult‖, ―to get higher marks/grades‖, and because ―peers accept and tend to see copying practices as normal‖. Results support the notion that context emerges as a very important influence in the decision to cheating. The environment-peer pressure and the normalized attitudes towards academic dishonesty are the main influences on the propensity to cheating.

Evaluation of a program to reduce back pain in nursing personnel

OBJECTIVE: To evaluate the effectiveness of a program designed to reduce back pain in nursing aides. METHODS: Female nursing aides from a university hospital who had suffered episodes of back pain for at least six months were included in the study. Participants were randomly divided into a control group and an intervention group. The intervention program involved a set of exercises and an educational component stressing the ergonomic aspect, administered twice a week during working hours for four months. All subjects answered a structured questionnaire and the intensity of pain was assessed before and after the program using a visual analogue scale (VAS). Student's t-test or the Wilcoxon Rank Sum Test for independent samples, and Chi-square test or the Exact Fisher test for categorical analysis, were used. The McNemar test and the Wilcoxon matched pairs test were used to compare the periods before and after the program. RESULTS: There was a statistically significant decrease in the frequency of cervical pain in the last two months and in the last seven days in the intervention group. There was also a reduction in cervical pain intensity in the two periods (2 months, 7 days) and lumbar pain intensity in the last 7 days. CONCLUSIONS: The results suggest that a program of regular exercise with an emphasis on ergonomics can reduce musculoskeletal symptoms in nursing personnel.

Cr2O3 thin films grown at room temperature by low pressure laser chemical vapour deposition

Chromia (Cr2O3) has been extensively explored for the purpose of developing widespread industrial applications, owing to the convergence of a variety of mechanical, physical and chemical properties in one single oxide material. Various methods have been used for large area synthesis of Cr2O3 films. However, for selective area growth and growth on thermally sensitive materials, laser-assisted chemical vapour deposition (LCVD) can be applied advantageously. Here we report on the growth of single layers of pure Cr2O3 onto sapphire substrates at room temperature by low pressure photolytic LCVD, using UV laser radiation and Cr(CO)(6) as chromium precursor. The feasibility of the LCVD technique to access selective area deposition of chromia thin films is demonstrated. Best results were obtained for a laser fluence of 120 mJ cm(-2) and a partial pressure ratio of O-2 to Cr(CO)(6) of 1.0. Samples grown with these experimental parameters are polycrystalline and their microstructure is characterised by a high density of particles whose size follows a lognormal distribution. Deposition rates of 0.1 nm s(-1) and mean particle sizes of 1.85 mu m were measured for these films. (C) 2011 Elsevier B.V. All rights reserved.

Effect of the number of shells on the pressure and energy of two-dimensional free bubble clusters

We have performed Surface Evolver simulations of two-dimensional hexagonal bubble clusters consisting of a central bubble of area lambda surrounded by s shells or layers of bubbles of unit area. Clusters of up to twenty layers have been simulated, with lambda varying between 0.01 and 100. In monodisperse clusters (i.e., for lambda = 1) [M.A. Fortes, F Morgan, M. Fatima Vaz, Philos. Mag. Lett. 87 (2007) 561] both the average pressure of the entire Cluster and the pressure in the central bubble are decreasing functions of s and approach 0.9306 for very large s, which is the pressure in a bubble of an infinite monodisperse honeycomb foam. Here we address the effect of changing the central bubble area lambda. For small lambda the pressure in the central bubble and the average pressure were both found to decrease with s, as in monodisperse clusters. However, for large,, the pressure in the central bubble and the average pressure increase with s. The average pressure of large clusters was found to be independent of lambda and to approach 0.9306 asymptotically. We have also determined the cluster surface energies given by the equation of equilibrium for the total energy in terms of the area and the pressure in each bubble. When the pressures in the bubbles are not available, an approximate equation derived by Vaz et al. [M. Fatima Vaz, M.A. Fortes, F. Graner, Philos. Mag. Lett. 82 (2002) 575] was shown to provide good estimations for the cluster energy provided the bubble area distribution is narrow. This approach does not take cluster topology into account. Using this approximate equation, we find a good correlation between Surface Evolver Simulations and the estimated Values of energies and pressures. (C) 2008 Elsevier B.V. All rights reserved.

Comparative study of power converter topologies and control strategies for the harmonic performance of variable-speed wind turbine generator systems

Power converters play a vital role in the integration of wind power into the electrical grid. Variable-speed wind turbine generator systems have a considerable interest of application for grid connection at constant frequency. In this paper, comprehensive simulation studies are carried out with three power converter topologies: matrix, two-level and multilevel. A fractional-order control strategy is studied for the variable-speed operation of wind turbine generator systems. The studies are in order to compare power converter topologies and control strategies. The studies reveal that the multilevel converter and the proposed fractional-order control strategy enable an improvement in the power quality, in comparison with the other power converters using a classical integer-order control strategy. (C) 2010 Elsevier Ltd. All rights reserved.

Force and pressure analysis during occasional loaded gait

O documento em anexo encontra-se na versão pre-print (versão inicial enviada para o editor).