Análise das principais variáveis na flotação industrial do complexo de mineração de Tapira - MG

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: ://www.scielo.br/scielo.php?pid=S0366-69132009000200015&script=sci_abstract&tlng=pt>. Acesso em: 06 out. 2010.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Obtenção de concentrado proteico do farelo de arroz e avaliação das propriedades químicas e funcionais

Esta dissertação é composta por 5 artigos.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: ://www.scielo.br/scielo.php?pid=S0366-69132009000200015&script=sci_abstract&tlng=pt>. Acesso em: 06 out. 2010.

The multistage crystallization of zircon in calc-alkaline granitoids : U-Pb age constraints on the timing of Variscan tectonic activity in SW Iberia

CL imaging and U–Th–Pb data for a population of zircons from two of the Évora Massif granitoids (Ossa-Morena Zone, SW Iberia) show that both calc-alkaline granitoids have zircon populations dominated by grains with cores and rims either showing or not showing differences in Th/U ratio, and having ages in the range ca. 350–335 Ma (Early Carboniferous). Multistage crystallization of zircon is revealed in two main growth stages (ca. 344–342 Ma and ca. 336–335 Ma), well represented by morphologically complex zircons with cores and rims with different ages and different Th/U ratios that can be explained by: (1) crystallization from melts with different compositions (felsic peraluminous to felsic-intermediate metaluminous; 0.001 Th/U ratio < 0.5) and (2) transient temperature fluctuations in a system where anatectic felsic melts periodically underwent injection of more mafic magmas at higher temperatures. The two studied calc-alkaline granitoids do not include inherited zircons (pre-Carboniferous), probably because they were formed at the highest grade of metamorphism (T 837 °C; granulite facies) and/or because they were derived from inheritance-poor felsic and mafic rocks from a previous cycle, as suggested by the internal structures of zircon cores. These Variscan magmatic rocks with crystallization ages estimated at ca. 336–335 Ma are spatially and temporally related to high-temperature metamorphism, anatexis, processes of interaction between crustal- and mantle-derived magmas and intra-orogenic extension that acted in SW Iberia during the Early Carboniferous.

Isolado protéico de farelo de arroz: obtenção, propriedades funcionais e aplicação

O arroz é o segundo cereal mais produzido no mundo e para que ele seja consumido é necessário o processo de beneficiamento, onde é retirada a casca, e com o polimento, o farelo. O farelo, após a retirada do óleo, é utilizado para alimentação animal, mas como corresponde a 8% do grão, são necessárias novas alternativas para o uso do mesmo, uma vez que contém em torno de 17% de proteína. As proteínas do farelo de arroz são consideradas de alta qualidade, hipoalergênicas e anticancerígenas. Devido ao excesso de fibras presentes no farelo, este não é utilizado diretamente na alimentação humana, podendo ser usado como fonte para a obtenção de extratos, concentrados ou isolados. A obtenção do isolado protéico pode ser por via química, que consiste na extração alcalina ou ácida, seguida de precipitação no ponto isoelétrico ou via enzimática, com o uso de enzimas amilolíticas, hemicelulases e carboidrases para a separação das proteínas. O objetivo deste estudo foi obter um isolado protéico a partir de farelo de arroz visando a inclusão deste em produto de panificação. Foi obtido isolado protéico pelo método químico que foi analisado pelo rendimento protéico, pelas propriedades funcionais, perfil aminoacídico, eletroforese e características térmicas. O isolado foi adicionado em bolos em diferentes concentrações sendo avaliado pelas características tecnológicas e sensoriais. O isolado protéico do farelo de arroz (IPFA) que apresentou maior rendimento protéico foi o obtido pelo método químico, com o farelo de granulometria de 42 mesh e desengordurado. Em relação às propriedades funcionais, foi verificado que o IPFA possui maior solubilidade e capacidade de retenção de água em pH 11, alta capacidade emulsificante e alta capacidade de formação de espuma. No aminograma, constatou-se que os aminoácidos encontrados no IPFA atendem as necessidades de bebês e crianças. No perfil eletroforético, o IPFA apresentou 3 grupos de proteínas. Na análise térmica com DSC, o IPFA apresentou alta temperatura de desnaturação e baixo valor de entalpia. Na elaboração dos bolos, à medida que foi adicionado o IPFA, aumentou o teor protéico, o pH e o volume específico e diminuiu o colapso, a luminosidade e a firmeza dos bolos. Na análise sensorial, os bolos com IPFA não apresentaram diferenças estatísticas do bolo controle (sem IPFA). Estes resultados indicam a potencialidade do IPFA em produtos de panificação.

Entre a pesca e a escola: a educação dos povos tradicionais a partir da comunidade pesqueira na ilha da Torotama (Rio Grande/RS)

O presente estudo aborda a temática da educação escolar nas comunidades tradicionais. Essa abordagem ocorre a partir do estudo de caso da Ilha da Torotama, Rio Grande/RS. É reconhecido que as comunidades tradicionais sofrem uma intensa transformação a partir da lógica moderna do capital, no caso do município de Rio Grande, percebe-se o quanto os discursos em torno do Polo Naval, paralelamente com a crise da pesca artesanal, impulsionam o êxodo das comunidades pesqueiras que constituem a região, levando o pescador ao abandono do trabalho, bem como a uma drástica ruptura frente as formas de vida no espaço tradicional de pesca. A partir desse panorama cabe questionar os sentidos que a escolarização assume nesses espaços, portanto: Quais as contradições e possibilidades da educação escolar nas comunidades tradicionais? Além disso, é necessário questionar: É possível (re)pensar as formas de contemplar os anseios desses povos tradicionais? Nesse sentido, busca-se compreender e problematizar as contradições e possibilidades em torno da escolarização em um contexto do Campo, constituído por povos tradicionais. Para o enfrentamento da problemática, assume-se uma postura dialética a partir de Gadotti (2012) e Severino (2001); esse embasamento epistemológico sustenta o olhar e a escuta da pesquisadora frente aos processos presentes no estudo. Com efeito, por meio da utilização da História Oral na perspectiva assumida por Thompson (1992), encontra-se para maior organização do processo de construção dos dados, a História Oral Temática (MEIHY e HOLANDA, 2010) e (MEIHY, 1996). Nesse horizonte, realizam-se entrevistas com três educadores e quatro educandos do Projeto Educação para Pescadores, o qual ocorre enquanto um processo de escolarização na Ilha da Torotama. O estudo aponta para a necessidade de pensar a escola nas comunidades tradicionais a partir do horizonte da Educação do Campo. Essa compreensão ocorre a partir dos desafios encontrados com relação a escolarização das referidas comunidades; haja vista que o Estado não assume de forma efetiva a educação básica nesses contextos, tampouco aborda a possibilidade de retorno dos sujeitos que tiveram a escolarização negligenciada. A omissão do poder público frente as demandas da comunidade, junto as formas de incentivo e beneficiamento da pequena burguesia industrial pesqueira, por exemplo, são indicativos de que as comunidades tradicionais sofrem em seu contexto uma forte contradição, pois, muito embora o Estado tenha enquanto obrigação resguardar tais povos, as demandas do mercado prevalecem na dinâmica evidenciada. Assim, assumir as lutas lançadas pela 8 perspectiva da Educação do Campo, é uma pertinente possibilidade de ruptura com o sentido que a escola vem apresentando nesses espaços: a escola é vista como uma forma de saída da comunidade e do trabalho da pesca. Portanto, acredita-se que ao assumir o horizonte da Educação do Campo, o trabalho desses sujeitos pertencentes as comunidades tradicionais possa ser problematizado, fomentando a construção crítica frente aos desafios impostos pela lógica opressora.

Sistema de gestão em segurança e saúde do trabalho (SGSST) integrando a norma OHSAS 18001 e NR-18: proposta para o setor da construção civil

The job security issue is crucial for the development of construction due to the need to ensure the health of workers, which is done by means of laws and production management. Thus, among various other laws, was enacted NR-18, in order to ensure the worker's minimum conditions for the development work. Despite legislative developments on the subject, they have become ineffective against the excessive number of accidents in the construction industry, bringing the company to greater in ensuring the health and safety of its workers. In view of this need for improvement of working environment in a general appearance, both for purposes of ensuring the law obedience as comfort for workers and quality of the organization, the System Health Management and Safety (OHSMS) is a valid tool demonstrates the evolution of business management, as well as OHSAS 18001 which proposes to ensure the efficiency and integration of a system geared to safety and health at work by means of implements and adaptations of it, in order to bring significant improvements to conditions of work, especially in the form of a new culture to be adopted by the company. Addressing the problem, this paper aims to develop a management system by OHSAS 18001 which is consistent with the terms of NR-18 as it is this integration of OHSMS Management System of the company as a usual practice of that aims at an improvement of work safety in the business of Buildings.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

A proveniência dos sedimentos e cinzas vulcânicas dos sedimentos permianos da bacia do Paraná : implicações para a história geológica do sul-sudoeste de Gondwana

Tese (doutorado)—Universidade de Brasília, Instituto de Geociências, Programa de Pós-Graduação em Geologia, 2016.

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Análise da rede de comercialização da castanha-do-brasil no Estado do Amazonas a partir de uma abordagem socioeconômica: um estudo de caso dos municípios de Lábrea e Beruri.

A castanha-do-brasil (Bertholletia excelsa) é um produto agroextrativista com forte potencial de geração de renda para as comunidades amazônicas. A coleta e o beneficiamento das amêndoas constituem importante atividade econômica nos municípios de Lábrea e Beruri, no Estado do Amazonas, formando uma complexa rede socioeconômica, composta por extrativistas, atravessadores, compradores, empresas e entidades civis e estatais. O presente trabalho teve como objetivo analisar tal dinâmica a partir da perspectiva de rede.

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry