Avaliação da espécie vegetal Croton cajucara Benth como inibidor de biocorrosão em aço carbono Aisi 1020

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties

Comparação de procedimentos de quantificação de nitrato em tecido vegetal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da adição de óleos mineral e vegetal a acaricidas no controle do ácaro-da-leprose dos citros Brevipalpus phoenicis (Geijskes) (Acari: Tenuipalpide)

Com a finalidade de esclarecer os efeitos da adição de óleo vegetal e mineral aos acaricidas foi conduzido um ensaio de campo em 1994 no município de Viradouro, SP, utilizando-se de Assist, Triona e Natur'l Óleo, na dosagem de 500 mL por 100 litros de água, adicionados aos acaricidas: pyridaben nas formulações 200 CE e 750 PM, nas dosagens de 75 mL e 20 g; propargite 720 CE a 100 mL; óxido de fenbutatina 500 SC a 80 mL e cyhexatin 500 PM a 50 g. O delineamento estatístico adotado foi o de blocos casualizados. As aplicações foram feitas com pulverizador tipo pistola. Após a preparação da calda, foi determinado o pH. Empregou-se máquina de varredura e microscópio estereoscópico para as avaliações da população acarina. A adição de Natur'l Óleo pode afetar negativamente a eficiência do pyridaben 200 CE e 750 PM e cyhexatin 500 PM, no controle do ácaro-da-leprose. Triona e Assist não afetaram as eficiências dos acaricidas testados. Pelo índice de iodo, mediu-se o grau de insaturação das misturas dos acaricidas com Natur'l Óleo, concluindo-se que houve incorporação das moléculas dos acaricidas pelas ligações insaturadas do óleo; porém, isto não explica o diferente comportamento dos produtos no controle do ácaro da leprose dos citros.

Efeito do uso de óleos vegetais, associados ou não a inseticida, no controle de bemisia tabaci (gennadius, 1889) e thrips tabaci (lindeman, 1888), em feijoeiro, na época das águas

The objective of this experiments was evaluate the control of Bemisia tabaci and Thrips tabaci, through the use of plant oils associated or not to insecticide in bean plants, besides verifying the consequences on yield. The experiment was carried out in the period of rainy seasons, by utilizing Carioca variety. The statistical design was the randomized blocks, by employing a 6x2 factorial scheme ( plant oil versus insecticide), totalizing 12 treatments and four replications. It was concluded thet application of plant oils without insecticide can be utilized on the control of the B. tabaci biotipo B, since their population and the symptoms of golden mosaic was similar to the treatment plant oils plus insecticide; among the plant oils Agrex (R) plant oil promoted a higher control of white fly. For T. tabaci the application of plant oil associated to insecticide provide with a smaller population index when compared to the treatments without this association. The yield was not affected by the population of B. tabaci biotipo B and T. tabaci when plant oils were utilized, associated or not to the insecticide.

Índice de cobertura vegetal e sua modelagem para cultivares de soja no sul de Minas Gerais

A cobertura vegetal do solo é decisiva para redução dos efeitos erosivos do impacto direto das gotas de chuva na superfície do solo. Desta forma, objetivou-se com este estudo determinar o índice de cobertura vegetal (CV) e desenvolver modelos para sua estimativa para a cultura da soja, usando os atributos climáticos no período de chuvas intensas no Sul de Minas Gerais. As determinações da CV foram feitas semanalmente, na área experimental do Departamento de Ciência do Solo, Universidade Federal de Lavras (UFLA), no período de novembro de 1999 a maio de 2000, em 28 cultivares de soja com potencial para cultivo nesta região. Para avaliação da cobertura vegetal foi utilizada a metodologia descrita por Stocking (1988). Na modelagem procurou-se relacionar a CV com os valores acumulados dos seguintes atributos climáticos: temperatura média (Tmed), precipitação (PREC) e umidade relativa do ar (UR). Os valores de cobertura vegetal apresentaram uma amplitude de variação de 56 a 83%, sendo BR 162, LO 12 L e M. Soy 108 as cultivares mais eficientes e FT Abyara e Tucano as menos eficientes. O hábito diferencial de crescimento das cultivares ajuda a explicar esse comportamento. O modelo ajustado adequado para estimativa da CV foi: CV = 116589,976 + 0,422 . Tmed + 0,132 . PREC - 0,095 . UR + 0,000024 . Tmed², R² = 0,99 (P < 0,01). A determinação da CV nas diferentes fases de desenvolvimento da cultura é de grande importância, uma vez que seu estabelecimento coincide com o período de maior potencial erosivo das chuvas na região estudada.

Uso de subprodutos de carvão vegetal na formação do porta-enxerto limoeiro 'Cravo' em ambiente protegido

O trabalho teve como objetivo avaliar o efeito do uso de fino de carvão no substrato e da aplicação de extrato pirolenhoso no substrato e na planta sobre o desenvolvimento de porta-enxertos de limoeiro 'Cravo' (Citrus limonia Osbeck) cultivados em ambiente protegido. O experimento foi desenvolvido no delineamento em blocos casualisados, com análise em esquema fatorial 3 x 2 x 3, sendo: 3 proporções de fino de carvão (0, 100 e 200 cm³ dm-3) em mistura com substrato comercial, 2 concentrações de extrato pirolenhoso (0 e 20 cm³ dm-3) misturadas no substrato (240 cm³ por dm³ de substrato) e 3 concentrações de extrato pirolenhoso (0, 5 e 10 cm³ dm-3) pulverizadas na parte aérea, em 4 repetições. Aos 150 e 180 dias após o plantio foram realizadas avaliações do desenvolvimento das plantas. As misturas de fino de carvão e substrato comercial contendo fino de carvão na proporção de 100 cm³ dm-3 não influíram no desenvolvimento de porta-enxertos de limoeiro 'Cravo' , porém, na proporção de 200 cm³ dm-3 prejudica o desenvolvimento dos mesmos. O umedecimento pré-plantio do substrato com solução diluída (20 cm³ dm-3) de extrato pirolenhoso ou pulverização da parte aérea das plantas com soluções a 5 e 10 cm³ dm-3 provoca redução do desenvolvimento de porta-enxertos de limoeiro 'Cravo' .

Resistência do solo à penetração, cobertura vegetal e produtividade do milho em plantio direto escarificado

O objetivo deste trabalho foi avaliar a influência da operação da escarificação ao longo do tempo sobre a estrutura de um solo em plantio direto, assim como os seus efeitos sobre a produtividade do milho e a formação de cobertura vegetal. O trabalho foi conduzido em um NITOSSOLO VERMELHO no município de Botucatu, São Paulo, Brasil. O delineamento experimental foi o de blocos casualizados em esquema de parcelas subdivididas, sendo as parcelas o fator manejo do solo (em plantio direto e em escarificação) e as subparcelas o fator período de avaliação (quatro e 18 meses após a escarificação) com quatro repetições por tratamento. Os resultados indicaram que, após o período de quatro meses, a escarificação reduziu significativamente a resistência do solo à penetração, até a profundidade de atuação das hastes do escarificador (0,30 m), e, após o período de 18 meses, o efeito da escarificação sobre a resistência do solo à penetração ocorreu apenas na camada superficial do solo (0,05 e 0,10 m). em área cultivada em sistema plantio direto, o efeito do preparo do solo com escarificador sobre a resistência à penetração tende a desaparecer no período de 1,5 anos. A quantidade de matéria seca na superfície do solo, em plantio direto, foi 30% superior ao solo com antecedente de escarificação pelo período de quatro meses.

Reguladores de crescimento vegetal na concentração de macronutrientes em videira Itália

Em clima tropical semi-árido, o uso de reguladores vegetais em fruteiras permite o manejo do crescimento vegetativo, tão necessário ao escalonamento da produção e ao aumento da fertilidade das gemas. Estas substâncias influenciam vários fenômenos fisiológicos relacionados com a absorção mineral, como a condutância de membrana e utilização metabólica de íons. O objetivo deste trabalho foi avaliar o crescimento vegetativo, produção de matéria seca dos ramos, concentração e quantidade acumulada de N, P, K, Ca e Mg nos ramos e nos pecíolos e produção de panículas florais em resposta ao uso de reguladores vegetais, em plantas de videira da cultivar Itália. No experimento foram avaliados três ciclos vegetativos e cinco tratamentos (controle, chlormequat - 1500 mg L-1; daminozide - 3000 mg L-1; uniconazole - 30 mg L-1 e cloreto de mepiquat - 300 mg L-1), aplicados nas plantas em pulverizações aos 35 e 70 dias após a poda. Com o chlormequat e o uniconazole ocorreu efeito cumulativo nas plantas, quando aplicados em ciclos sucessivos da cultura, favorecendo o acúmulo de nutrientes e a diferenciação de gemas férteis em comparação com as plantas controle das videiras 'Itália'. Embora o daminozide tenha inibido significativamente o crescimento das plantas, não resultou em maior acúmulo de nutrientes e emissão de panículas florais nas plantas tratadas.

A naturally occurring recombinant isolate of Lettuce mosaic virus

LMV-Common and LMV-Most are two seed-borne types of Lettuce mosaic virus (LMV), genus Potyvirus. LMV-Most, but not LMV-Common, overcomes the resistance afforded to lettuce by two recessive genes, mo1(1) and mo1(2). An RT-PCR-based assay thought to be specific for LMV-Most also amplified LMV-Tn2, previously typified as LMV-Common. The sequence of selected regions along the genome indicated that LMV-Tn2 is a natural recombinant between LMV-Most and LMV-Common isolates, with a putative recombination site located within the P3 coding region. This is the first evidence of a naturally occurring LMV recombinant isolate.

Specific detection of Lettuce mosaic virus isolates belonging to the Most type

Lettuce mosaic virus (LMV)-Most isolates can infect and are seed-borne in cultivars containing the mol gene. A reverse transcription and polymerase chain reaction (RT-PCR)-based test was developed for the specific detection of LMV-Most isolates. Based on the complete genome sequences of three LMV isolates belonging respectively to the Most type, the Common type and neither of these two types, three different assays were compared: (i) presence of a diagnostic restriction site in the region of the genome encoding the variable N-terminus of the capsid protein, in the 3' end of the genome, (ii) RT-PCR using primers designed to amplify a cDNA corresponding to a portion of the P1 coding region, in the 5' end of the genome and (iii) RT-PCR using primers designed to amplify a central region of the genome. The assays were performed against a collection of 21 isolates from different geographical origins and representing the molecular variability of LMV. RT-PCR of the central region of the genome was preferred because its results are expected to be less affected by natural recombination between LMV isolates, and it allows sensitive detection of LMV-Most in situations of single as well as mixed contamination. (C) 2004 Elsevier B.V. All rights reserved.

Analysis of the serological variability of Lettuce mosaic virus using monoclonal antibodies and surface plasmon resonance technology

A panel of 19 monoclonal antibodies (mAbs) was used to study the immunological variability of Lettuce mosaic virus (LMV), a member of the genus Potyvirus, and to perform a first epitope characterization of this virus. Based on their specificity of recognition against a panel of 15 LMV isolates, the mAbs could be clustered in seven reactivity groups. Surface plasmon resonance analysis indicated the presence, on the LMV particles, of at least five independent recognition/ binding regions, correlating with the seven mAbs reactivity groups. The results demonstrate that LMV shows significant serological variability and shed light on the LMV epitope structure. The various mAbs should prove a new and efficient tool for LIVIV diagnostic and field epidemiology studies.

Molecular mapping of the viral determinants of systemic wilting induced by a Lettuce mosaic virus (LMV) isolate in some lettuce cultivars

The isolate AF199 of Lettuce mosaic virus (LMV, genus Potyvirus) causes local lesions followed by systemic wilting and plant death in the lettuce cultivars Ithaca and Vanguard 75. Analysis of the phenotype of virus chimeras revealed that a region within the PI protein coding region (nucleotides 112-386 in the viral genome) and/or another one within the CI protein coding region (nucleoticles 5496-5855) are sufficient together to cause the lethal wilting in Ithaca, but not in Vanguard 75. This indicates that the determinants of this particular symptom are different in these two lettuce cultivars. The wilting phenotype was not directly correlated with differences in the deduced amino acid sequence of these two regions. Furthermore, transient expression of the LMV-AF 199 proteins, separately or in combination, did not induce local necrosis or any other visible reaction in the plants. Together, these results Suggest that the systemic wilting reaction might be Clue to RNA rather than protein sequences. (c) 2004 Elsevier B.V. All rights reserved.

Fibras de licuri: um reforço vegetal alternativo de compósitos poliméricos

This research is based, at first, on the seeking of alternatives naturals reinforced in place of polymeric composites, also named reinforced plastics. Therein, this work starts with a whole licuri fiber micro structural characterization, as alternative proposal to polymeric composites. Licuri fiber is abundant on the Bahia state flora, native from a palm tree called Syagrus Coronata (Martius) Beccari. After, it was done only licuri fiber laminar composite developing studies, in order to know its behavior when impregnated with thermofix resin. The composite was developed in laminar structure shape (plate with a single layer of reinforcement) and produced industrially. The layer of reinforcement is a fabric-fiber unidirectional of licuri up in a manual loom. Their structure was made of polyester resin ortofitálica (unsaturated) only reinforced with licuri fibers. Fiber characterization studies were based on physical chemistry properties and their constitution. It was made by tension, scanning electron microscopy (SEM), x-ray diffraction (RDX) and thermal analyses (TG and DTA) tests, besides fiber chemistry analyses. Relating their mechanical properties of strength and hardness testing, they were determined through unit axial tension test and flexion in three points. A study in order to know fiber/matrix interface effects, in the final composites results, was required. To better understand the mechanical behavior of the composite, macroscopic and microscopic optical analysis of the fracture was performed

Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

INHERITANCE of CUCUMBER TOLERANCE TO ZUCCHINI YELLOW MOSAIC VIRUS

Studies were carried out in Brazil to study the inheritance of tolerance to Zucchini yellow mosaic virus (ZYMV) in cucumber cv. Formosa. This cultivar was individually crossed with two cucumber lines from different varietal types (L(b) from a Brazilian type, and L(j) from a Japanese type), both susceptible to the virus. Two experiments, one for each line, were separately carried out, where 6 treatments (parents, generations F1, F2 and F1BC1 for both parents) were evaluated in a randomized block design with 5 repetitions. Cotyledons of 2-week-old cucumber seedlings were inoculated with ZYMV. Only the plants that did not show symptoms up to 63 days post inoculation were considered as tolerant. A chi-square (chi(2)) analysis for assessing segregation from F2 and both F1BC1, led to the conclusion that the tolerance found in cv. Formosa is determined by a recessive gene.