Fine root respiration in the mangrove Rhizophora mangle over variation in forest stature and nutrient availability

Root respiration uses a significant proportion of photosynthetically fixed carbon (C) and is a globally important source of C liberated from soils. Mangroves, which are an important and productive forest resource in many tropical and subtropical countries, sustain a high ratio of root to shoot biomass which may indicate that root respiration is a particularly important component in mangrove forest carbon budgets. Mangroves are often exposed to nutrient pollution from coastal waters. Here we assessed the magnitude of fine root respiration in mangrove forests in Belize and investigated how root respiration is influenced by nutrient additions. Respiration rates of excised fine roots of the mangrove, Rhizophora mangle L., were low (4.01 +/- 0.16 nmol CO2 g(-1) s(-1)) compared to those measured in temperate tree species at similar temperatures. In an experiment where trees where fertilized with nitrogen (N) or phosphorus (P) in low productivity dwarf forests (1-2 m height) and more productive, taller (47 m height) seaward fringing forests, respiration of fine roots did not vary consistently with fertilization treatments or with forest stature. Fine roots of taller fringe trees had higher concentrations of both N and P compared to dwarf trees. Fertilization with P enhanced fine root P concentrations in both dwarf and fringe trees, but reduced root N concentrations compared to controls. Fertilization with N had no effect on root N or P concentrations. Unlike photosynthetic C gain and growth, which is strongly limited by P availability in dwarf forests at this site, fine root respiration (expressed on a mass basis) was variable, but showed no significant enhancements with nutrient additions. Variation in fine root production and standing biomass are, therefore, likely to be more important factors determining C efflux from mangrove sediments than variations in fine root respiration per unit mass.

Uncovering the root cause of ethnic difference in ability testing:differential test functioning, test familiarity and trait optimism as explanations of ethnic group differences

The present research represents a coherent approach to understanding the root causes of ethnic group differences in ability test performance. Two studies were conducted, each of which was designed to address a key knowledge gap in the ethnic bias literature. In Study 1, both the LR Method of Differential Item Functioning (DIF) detection and Mixture Latent Variable Modelling were used to investigate the degree to which Differential Test Functioning (DTF) could explain ethnic group test performance differences in a large, previously unpublished dataset. Though mean test score differences were observed between a number of ethnic groups, neither technique was able to identify ethnic DTF. This calls into question the practical application of DTF to understanding these group differences. Study 2 investigated whether a number of non-cognitive factors might explain ethnic group test performance differences on a variety of ability tests. Two factors – test familiarity and trait optimism – were able to explain a large proportion of ethnic group test score differences. Furthermore, test familiarity was found to mediate the relationship between socio-economic factors – particularly participant educational level and familial social status – and test performance, suggesting that test familiarity develops over time through the mechanism of exposure to ability testing in other contexts. These findings represent a substantial contribution to the field’s understanding of two key issues surrounding ethnic test performance differences. The author calls for a new line of research into these performance facilitating and debilitating factors, before recommendations are offered for practitioners to ensure fairer deployment of ability testing in high-stakes selection processes.

Inter-relação entre lesão cervical não cariosa e comprometimento periodontal: diagnóstico, tratamento e previsibilidade - estudo clínico prospectivo e laboratorial

The coexistence of gingival recession (GR) with root coverage indication and non-carious cervical lesions (LCNC) generates the need for a protocol that respects and promotes health of dental and periodontal tissues and allows treatment predictability. The main objectives of this theses were: (1) verify, through clinical evaluations, the connective tissue graft for root coverage on direct and indirect restorations made of ceramic resin; (2) analyze the influence of the battery level of the LED curing unit in the composite resin characteristics; (3) assess the influence of restorative materials, composite resin and ceramics, on the viability of gingival fibroblasts from primary culture. Nine patients with good oral hygiene and occlusal stability diagnosed with LCNCs the anterior teeth including premolars associated with gingival recession (class I and II of Miller) and only gingival recession were selected. After initial clinical examination, occlusal adjustment was performed and the patients had their teeth randomized allocated on direct composite resin restoration of LCNC, polishing and GR treatment with connective tissue graft and advanced coronally flap CR group (n = 15); and indirect ceramic restoration of the LCNC's and GR treatment (CTG+CAF) Group C (n = 15). The GR presented teeth with no clinically formed LCNCs cavity were treated using (CTG+CAF) being the control group (n = 15). Sorption and solubility tests, analysis of the degree of conversion and diametral tensile strength were performed in composite resin samples (n = 10) photoactivated by 100, 50 and 10% battery charge LED unit. The viability of fibroblasts on composite resin, ceramics and dentin disks (n = 3) was examined. Clinical follow-up was performed for three months. The data obtained at different stages were tabulated and subjected to analysis for detection of normal distribution and homogeneity. The results showed that: the LED unit with 10% battery affects the characteristics of the composite resin; restorative materials present biocompatibility with gingival fibroblasts; and the association of surgical and restorative treatment of teeth affected by NCCL and GR presents successful results at 3-month follow-up.

Behavior of Granular Materials Under Triaxial Compression with Pulsating Deviator Stress, HR-131, Special Report

Behavior of granular material subjected to repeated load triaxial compression tests is characterized by a model based on rate process theory. Starting with the Arrhenius equation from chemical kinetics, the relationship of temperature, shear stress, normal stress and volume change to deformation rate is developed. The proposed model equation includes these factors as a product of exponential terms. An empirical relationship between deformation and the cube root of the number of stress applications at constant temperature and normal stress is combined with the rate equation to yield an integrated relationship of temperature, deviator stress, confining pressure and number of deviator stress applications to axial strain. The experimental program consists of 64 repeated load triaxial compression tests, 52 on untreated crushed stone and 12 on the same crushed stone material treated with 4% asphalt cement. Results were analyzed with multiple linear regression techniques and show substantial agreement with the model equations. Experimental results fit the rate equation somewhat better than the integrated equation when all variable quantities are considered. The coefficient of shear temperature gives the activation enthalpy, which is about 4.7 kilocalories/mole for untreated material and 39.4 kilocalories/mole for asphalt-treated material. This indicates the activation enthalpy is about that of the pore fluid. The proportionality coefficient of deviator stress may be used to measure flow unit volume. The volumes thus determined for untreated and asphalt-treated material are not substantially different. This may be coincidental since comparison with flow unit volumes reported by others indicates flow unit volume is related to gradation of untreated material. The flow unit volume of asphalt-treated material may relate to asphalt cement content. The proposed model equations provide a more rational basis for further studies of factors affecting deformation of granular materials under stress similar to that in pavement subjected to transient traffic loads.

Orientation de l’effort des tests unitaires dans les systèmes orientés objet : une approche basée sur les métriques logicielles

Les logiciels actuels sont de grandes tailles, complexes et critiques. Le besoin de qualité exige beaucoup de tests, ce qui consomme de grandes quantités de ressources durant le développement et la maintenance de ces systèmes. Différentes techniques permettent de réduire les coûts liés aux activités de test. Notre travail s’inscrit dans ce cadre, est a pour objectif d’orienter l’effort de test vers les composants logiciels les plus à risque à l’aide de certains attributs du code source. À travers plusieurs démarches empiriques menées sur de grands logiciels open source, développés avec la technologie orientée objet, nous avons identifié et étudié les métriques qui caractérisent l’effort de test unitaire sous certains angles. Nous avons aussi étudié les liens entre cet effort de test et les métriques des classes logicielles en incluant les indicateurs de qualité. Les indicateurs de qualité sont une métrique synthétique, que nous avons introduite dans nos travaux antérieurs, qui capture le flux de contrôle ainsi que différentes caractéristiques du logiciel. Nous avons exploré plusieurs techniques permettant d’orienter l’effort de test vers des composants à risque à partir de ces attributs de code source, en utilisant des algorithmes d’apprentissage automatique. En regroupant les métriques logicielles en familles, nous avons proposé une approche basée sur l’analyse du risque des classes logicielles. Les résultats que nous avons obtenus montrent les liens entre l’effort de test unitaire et les attributs de code source incluant les indicateurs de qualité, et suggèrent la possibilité d’orienter l’effort de test à l’aide des métriques.

Génération de squelettes des contrats de classes et des tests unitaires en Java

Le logiciel est devenu omniprésent dans nos vies de sorte qu'on le retrouve dans plusieurs domaines de la vie courante. Cependant cette omniprésence, n'est pas sans conséquences. Les bogues de logiciel peuvent causer de vrais désastres, économiques, écologiques voire sanitaires. Vu la forte omniprésente du logiciel dans nos vies, le fonctionnement de nos sociétés dépend fortement de sa qualité. La programmation par contrat a pour but de produire des logiciels fiables, c'est-à-dire corrects et robustes. En effet, ce paradigme de programmation vise à introduire des assertions qui sont des spécifications de services. Ces spécifications représentent une forme de contrat. Les contrats définissent les responsabilités entre le client et le fournisseur. Le respect des contrats permet de garantir que le logiciel ne fait ni plus ni moins que ce que l'on attend de lui qu'il fasse. Le test unitaire est un test qui permet de s'assurer du bon fonctionnement d'une partie précise d'un logiciel. C'est un test dont la vérification se fait en exécutant une petite unité de code. En somme, un test unitaire est un code qui exécute de manière indirecte le code d'une classe pour vérifier que le code fonctionne bien. L'outil Génération de Squelettes des Contrats de classes et des tests unitaires (GACTUS) permet la génération automatique de squelettes de contrats de classes et celles des classes des tests unitaires d'un projet Java. La génération automatique du code source permet d'obtenir un code uniforme. GACTUS est un plug-in pour l'environnement de développement Eclipse écrit en Java. L'objectif principal de GACTUS est de faciliter la réalisation de logiciel de qualité grâce à la génération automatique des squelettes de contrats de classe et celui des tests unitaires et aussi d'accroître la productivité des développeurs. Pour faciliter son utilisation, GACTUS dispose d'une interface graphique permettant de guider l'utilisateur.

Sero-prevalence and associated factors of Helicobacter pylori infection among adult patients with dyspepsia attending the gastroenterology unit in a tertiary hospital in Mwanza, Tanzania.

Background: Prevalence of H. pylori infection varies greatly between populations in different countries. This study was conducted to determine the magnitude of H.pylori among adult patients with dyspepsia attending the gastroenterology unit at Bugando medical centre. Methods: A cross sectional study involving 202 dyspeptic patients was conducted between June and July 2014. A Standardized data collection tool was used to collect socio-demographic characteristics. H.pylori antibodies were detected using rapid immunochromatographic tests according to manufacturer’s instructions. Results: The median age of study population was 42 (IQR: 33-54). Females 105 (51.9%) formed majority of the population studied. Of 202 participants; 119 (58.9%) were from rural areas. Seroprevalence of H.pylori infection was found to be 79/202 (39.1%, 95% CI: 32.3 -45.7). As the age increased the risk of having H.pylori infection also increased (OR: 1.02 95% CI: 1-1.04, P=0.02). On multivariate logistic regression analysis untreated drinking water was found to predict H.pylori seropositivity (OR: 2.33, CI: 1.09-4.96, p=0.028). Conclusion: The seroprevalence of H.pylori among dyspeptic patients is high in this setting. Therefore the community in Mwanza should be educated on the use of safe drinking water in order to minimize H. pylori infections.

Evaluation of a root extract gel from Urtica dioica (Urticaceae) as analgesic and anti-inflammatory therapy in rheumatoid arthritis in mice

Purpose: To develop and characterize an herbal gel prepared from methanol root extract of Urtica dioica (Urticaceae) (Stinging nettle) for the treatment of arthritis in mice. Methods: A methanol root extract from Urtica dioica was prepared, and a gel was then prepared using Carbopol 934. The prepared gel was subjected to various physical tests (color, appearance, pH, texture, viscosity) and in vivo evaluation, including primary skin irritation, analgesic, and anti-inflammatory tests, in arthritic mice and compared with 2 % indomethacin gel, which was used as standard. Results: The prepared herbal gel was of light gray color with a smooth texture. It showed a pH of 7.1 and a viscosity of 21.2 cps. The gel exhibited pseudoplastic rheology, as evidenced by shear thinning with increased shear rate. It was non-irritating to the skin in primary skin irritation test in mice and showed 55.05 % inhibition of paw edema in a carrageenan-induced hind rat paw edema model, comparable to that of the standard gel (53.93 %), after 24 h. The gel showed 58.21 % analgesia, versus 61.19 % analgesia for the indomethacin gel standard in writhing test. Conclusion: The topical gel from methanol root extract of U. dioica may be an efficacious and safe alternative to non-steroidal anti-inflammatory drugs in the treatment of rheumatoid arthritis but this requires further investigations to ascertain its safety and clinical efficacy.

Ordonnancement des opérations dans une unité d’extrusion

Les travaux de ce mémoire traitent du problème d’ordonnancement et d’optimisation de la production dans un environnement de plusieurs machines en présence de contraintes sur les ressources matérielles dans une usine d’extrusion plastique. La minimisation de la somme pondérée des retards est le critère économique autour duquel s’articule cette étude car il représente un critère très important pour le respect des délais. Dans ce mémoire, nous proposons une approche exacte via une formulation mathématique capable des donner des solutions optimales et une approche heuristique qui repose sur deux méthodes de construction de solution sérielle et parallèle et un ensemble de méthodes de recherche dans le voisinage (recuit-simulé, recherche avec tabous, GRASP et algorithme génétique) avec cinq variantes de voisinages. Pour être en totale conformité avec la réalité de l’industrie du plastique, nous avons pris en considération certaines caractéristiques très fréquentes telles que les temps de changement d’outils sur les machines lorsqu’un ordre de fabrication succède à un autre sur une machine donnée. La disponibilité des extrudeuses et des matrices d’extrusion représente le goulot d’étranglement dans ce problème d’ordonnancement. Des séries d’expérimentations basées sur des problèmes tests ont été effectuées pour évaluer la qualité de la solution obtenue avec les différents algorithmes proposés. L’analyse des résultats a démontré que les méthodes de construction de solution ne sont pas suffisantes pour assurer de bons résultats et que les méthodes de recherche dans le voisinage donnent des solutions de très bonne qualité. Le choix du voisinage est important pour raffiner la qualité de la solution obtenue. Mots-clés : ordonnancement, optimisation, extrusion, formulation mathématique, heuristique, recuit-simulé, recherche avec tabous, GRASP, algorithme génétique

Evaluation Of The Radiopacity Of Esthetic Root Canal Posts.

The radiopacity of esthetic root canal posts may impair the assessment of their fit to the root canal when using radiographic images. This study determined in vitro the radiographic density of esthetic root canal posts using digital images. Thirty-six roots of human maxillary canines were assigned to six groups (N=6 per group): Reforpost (RP); Aestheti-Plus (AP); Reforpost MIX (RPM); D.T. Light Post (LP); Reforpost Radiopaque (RPR); and White Post DC (WP). Standardized digital images of the posts were obtained in different conditions: outside the root canal, inside the canal before and after cementation using luting material, and with a tissue simulator. Analysis of variance was used to compare the radiopacity mean values among the posts outside the root canal and among the posts under the other conditions, and the t unpaired test to compare the radiopacity between the posts and the dentin, and between the posts and the root canal space. There was no statistically significant difference in radiopacity between RP and RPM, and LP and WP. AP posts showed radiopacity values significantly lower than those for dentin. No statistically significant difference was found between posts (RP and AP) and the root canal space. A statistically significant difference was observed between the luted and non-luted posts; additionally, luted posts with and without tissue simulator showed no significant differences. Most of the cement-luted posts analyzed in this study were distinguishable from the density of adjacent dentin surfaces, allowing radiographic confirmation of the fit of the post in the canal. The success of using esthetic root canal posts depends mainly on the fit of the post within the canal.[1] The radiopacity of a post allows for radiographic imaging to be used to determine the fit, an important factor in a clinical perspective.

Microbial Evaluation Of Traumatized Teeth Treated With Triple Antibiotic Paste Or Calcium Hydroxide With 2% Chlorhexidine Gel In Pulp Revascularization.

Revascularization outcome depends on microbial elimination because apical repair will not happen in the presence of infected tissues. This study evaluated the microbial composition of traumatized immature teeth and assessed their reduction during different stages of the revascularization procedures performed with 2 intracanal medicaments. Fifteen patients (7-17 years old) with immature teeth were submitted to the revascularization procedures; they were divided into 2 groups according to the intracanal medicament used: TAP group (n = 7), medicated with a triple antibiotic paste, and CHP group (n = 8), dressed with calcium hydroxide + 2% chlorhexidine gel. Samples were taken before any treatment (S1), after irrigation with 6% NaOCl (S2), after irrigation with 2% chlorhexidine (S3), after intracanal dressing (S4), and after 17% EDTA irrigation (S5). Cultivable bacteria recovered from the 5 stages were counted and identified by means of polymerase chain reaction assay (16S rRNA). Both groups had colony-forming unit counts significantly reduced after S2 (P < .05); however, no significant difference was found between the irrigants (S2 and S3, P = .99). No difference in bacteria counts was found between the intracanal medicaments used (P = .95). The most prevalent bacteria detected were Actinomyces naeslundii (66.67%), followed by Porphyromonas endodontalis, Parvimonas micra, and Fusobacterium nucleatum, which were detected in 33.34% of the root canals. An average of 2.13 species per canal was found, and no statistical correlation was observed between bacterial species and clinical/radiographic features. The microbial profile of infected immature teeth is similar to that of primarily infected permanent teeth. The greatest bacterial reduction was promoted by the irrigation solutions. The revascularization protocols that used the tested intracanal medicaments were efficient in reducing viable bacteria in necrotic immature teeth.

Assessment Of The Fixation Of Mandibular Symphysis Fractures Using Conical Cannulated Screws: Mechanical And Photoelastic Tests.

The aim of this study was to use mechanical and photoelastic tests to compare the performance of cannulated screws with other fixation methods in mandibular symphysis fractures. Ten polyurethane mandibles were allocated to each group and fixed as follows: group PRP, 2 perpendicular miniplates; group PLL, 1 miniplate and 1 plate, parallel; and group CS, 2 cannulated screws. Vertical linear loading tests were performed. The differences between mean values were analyzed with the Tukey test. The photoelastic test was carried out using a polariscope. The results revealed differences between the CS and PRP groups at 1, 3, 5, and 10 millimeters of displacement. The photoelastic test confirmed higher stress concentration in all groups close to the mandibular base, whereas the CS group showed it throughout the region assessed. Conical cannulated screws performed well in mechanical and photoelastic tests.

Efficacy Of Ethylene-diamine-tetra-acetic Acid Associated With Chlorhexidine On Intracanal Medication Removal: A Scanning Electron Microscopy Study.

The aim of this study was to evaluate the effectiveness of 17% ethylene-diamine-tetra-acetic acid (EDTA) used alone or associated with 2% chlorhexidine gel (CHX) on intracanal medications (ICM) removal. Sixty single-rooted human teeth with fully formed apex were selected. The cervical and middle thirds of each canal were prepared with Gates Glidden drills and rotary files. The apical third was shaped with hand files. The specimens were randomly divided into two groups depending on the ICM used after instrumentation: calcium hydroxide Ca(OH)(2) +CHX or Ca(OH)(2) +sterile saline (SS). After seven days, each group was divided into subgroups according to the protocol used for ICM removal: instrumentation and irrigation either with EDTA, CHX+EDTA, or SS (control groups). All specimens were sectioned and processed for observation of the apical thirds by using scanning electron microscopy. Two calibrated evaluators attributed scores to each specimen. The differences between the protocols for ICM removal were analyzed with Kruskal-Wallis and Mann-Whitney U tests. Friedman and Wilcoxon signed rank tests were used for comparison between the score of debris obtained in each root canal third. Remains of Ca(OH)(2) were found in all specimens independently of the protocol and ICM used (P > 0.05). Seventeen percent EDTA showed the best results in removing ICM when used alone (P < 0.05), particularly in those associated with CHX. It was concluded that the chelating agent 17% EDTA significantly improved the removal of ICM when used alone. Furthermore, the type of the vehicle associated with Ca(OH)(2) also plays a role in the ICM removal.

A Microleakage Study Of Gutta-percha/ah Plus And Resilon/real Self-etch Systems After Different Irrigation Protocols.

The development and maintenance of the sealing of the root canal system is the key to the success of root canal treatment. The resin-based adhesive material has the potential to reduce the microleakage of the root canal because of its adhesive properties and penetration into dentinal walls. Moreover, the irrigation protocols may have an influence on the adhesiveness of resin-based sealers to root dentin. The objective of the present study was to evaluate the effect of different irrigant protocols on coronal bacterial microleakage of gutta-percha/AH Plus and Resilon/Real Seal Self-etch systems. One hundred ninety pre-molars were used. The teeth were divided into 18 experimental groups according to the irrigation protocols and filling materials used. The protocols used were: distilled water; sodium hypochlorite (NaOCl)+eDTA; NaOCl+H3PO4; NaOCl+eDTA+chlorhexidine (CHX); NaOCl+H3PO4+CHX; CHX+eDTA; CHX+ H3PO4; CHX+eDTA+CHX and CHX+H3PO4+CHX. Gutta-percha/AH Plus or Resilon/Real Seal Se were used as root-filling materials. The coronal microleakage was evaluated for 90 days against Enterococcus faecalis. Data were statistically analyzed using Kaplan-Meier survival test, Kruskal-Wallis and Mann-Whitney tests. No significant difference was verified in the groups using chlorhexidine or sodium hypochlorite during the chemo-mechanical preparation followed by eDTA or phosphoric acid for smear layer removal. The same results were found for filling materials. However, the statistical analyses revealed that a final flush with 2% chlorhexidine reduced significantly the coronal microleakage. A final flush with 2% chlorhexidine after smear layer removal reduces coronal microleakage of teeth filled with gutta-percha/AH Plus or Resilon/Real Seal SE.

Utilization Of (15)no3 (-) By Nodulated Soybean Plants Under Conditions Of Root Hypoxia.

Waterlogging of soils is common in nature. The low availability of oxygen under these conditions leads to hypoxia of the root system impairing the development and productivity of the plant. The presence of nitrate under flooding conditions is regarded as being beneficial towards tolerance to this stress. However, it is not known how nodulated soybean plants, cultivated in the absence of nitrate and therefore not metabolically adapted to this compound, would respond to nitrate under root hypoxia in comparison with non-nodulated plants grown on nitrate. A study was conducted with (15)N labelled nitrate supplied on waterlogging for a period of 48 h using both nodulated and non-nodulated plants of different physiological ages. Enrichment of N was found in roots and leaves with incorporation of the isotope in amino acids, although to a much smaller degree under hypoxia than normoxia. This demonstrates that nitrate is taken up under hypoxic conditions and assimilated into amino acids, although to a much lesser extent than for normoxia. The similar response obtained with nodulated and non-nodulated plants indicates the rapid metabolic adaptation of nodulated plants to the presence of nitrate under hypoxia. Enrichment of N in nodules was very much weaker with a distinct enrichment pattern of amino acids (especially asparagine) suggesting that labelling arose from a tissue source external to the nodule rather than through assimilation in the nodule itself.