Qualidade de vida em pacientes com doença ateroclerótica coronariana grave e estável

FUNDAMENTO: Existem poucas informações sobre fatores agravantes da qualidade de vida em pacientes com doença arterial coronariana (DAC), antes da intervenção coronária percutânea (ICP). OBJETIVO: Associar variáveis clínicas com escores de qualidade de vida (EQV) em pacientes com DAC estável, antes da ICP e com desfechos desfavoráveis, 12 meses após o procedimento. MÉTODOS: Trata-se de estudo longitudinal incluindo 78 pacientes (43 homens e 35 mulheres), antes da ICP eletiva. As associações entre EQV (questionário SF-36) e idade, sexo, peso, índice de massa corpórea, diabete melito (DM), hipertensão arterial, dislipidemia, tabagismo atual, evento cardiovascular ou ICP prévios, controle da glicemia e da pressão arterial foram analisadas por meio de regressão logística multivariada. Também se analisaram as associações entre esses atributos clínicos e os desfechos desfavoráveis (morte por qualquer causa, insuficiência cardíaca ou infarto não fatal). O nível de significância foi p < 0,05. RESULTADOS: As medianas dos EQV estiveram abaixo de 70 percentuais em todos os domínios. Sexo feminino, idade < 60 anos, evento cardiovascular ou ICP prévios, IMC > 25 kg/m², DM e pressão arterial elevada foram associados a maior prejuízo de, pelo menos, um dos EQV. Sexo feminino (OR: 7,19; IC95%: 1,55 - 33,36; p = 0,012), evento cardiovascular prévio (OR: 3,97; IC95%: 1,01 - 15,66; p = 0,049) e insucesso na ICP (OR: 10,60; IC95%: 1,83 - 61,46; p = 0,008) foram associados com risco aumentado de desfecho combinado. CONCLUSÃO: Na presença de DAC, mulheres e pacientes com comorbidades têm maior prejuízo da qualidade de vida. Os desfechos desfavoráveis após 12 meses da ICP estão associados com o sexo feminino, evento prévio ou insucesso do procedimento.

Aspectos histológicos da união da enxertia hipocotiledonar do maracujazeiro-amarelo

O objetivo deste trabalho foi verificar, um mês após a realização da enxertia hipocotiledonar, a conexão entre os tecidos vasculares do enxerto e do porta-enxerto e diferenças anatômicas na formação da união da enxertia entre os sete porta-enxertos. Coletaram-se amostras da região de enxertia de duas mudas de cada combinação enxerto/porta-enxerto. As regiões da enxertia foram fixadas, desidratadas em série alcoólica, incluídas em parafina, emblocadas e seccionadas em micrótomo. As secções obtidas foram montadas em lâminas de vidro, desparafinizadas, coradas com safranina e novamente desidratadas, obtendo-se lâminas histológicas permanentes. Cerca de 800 secções foram observadas e analisadas sob microscópio óptico e fotomicrografadas. Não se verificou diferença anatômica na formação da união da enxertia entre os sete porta-enxertos, e um mês após a realização da enxertia, a conexão entre os tecidos vasculares do enxerto e do porta-enxerto era observável.

A união substancial corpo-alma no âmbito da nova ciência cartesiana

As dificuldades enfrentadas por Descartes para pensar a união substancial corpo/alma, já que partiu da distinção real das duas substâncias. Uma tentativa de pensar essa união conflitante em termos de uma oposição por complementaridade.

Avaliação da resistência de união metalocerâmica em função de diferentes tempos de oxidação prévia

Avaliou-se a resistência de união metal/porcelana utilizando-se uma liga de Ni-Cr, submetida a diferentes tempos de oxidação prévia com o sistema cerâmico Vita-VMK, através do teste preconizado por CHIODI NETTO3. A análise dos resultados permitiu as seguintes conclusões: a ausência da oxidação prévia possibilitou os melhores resultados, sendo que a diferença foi estatisticamente significante; diferentes tempos de oxidação prévia provocaram redução acentuada nos valores obtidos e foram semelhantes entre si; o grupo submetido ao processo de jateamento após a oxidação prévia por cinco minutos mostrou resultados similares aos grupos que também passaram pelo processo de oxidação e não sofreram jateamento posterior.

Influência de diferentes agentes de fixação na resistência de união, por tração, de ligas metálicas fixadas à dentina.

They were casted pieces using three kinds of alloy (Ni-Cr, Ag-Sn and Cu-Al) with circular and smooth surface. They were cemented to human teeth, on occlusal surface, grounded at dentin level, through three different materials kind (zinc polycarboxylate cement, glassionomer cement and composite). After 24 hours storing, the samples were subjected to the tensile test. The results showed that the samples cemented with composite and the casts made with Ag-Sn alloy had higher bond strength.

Estudo comaprativo da resistência da união esmalt/resina/metal. Efeito de resinas de fixação, artifícios retentivos e ligas metálicas.

The purpose of this study was to compare the enamel/resin/metal bond tensile strength by using human canines, in which castings were bonded. These castings were obtained by Co-Cr or Ni-Cr alloys and showed four types of mechanisms of retention: 50 micrograms aluminum oxide abrasive, electrochemical etch, acrylic beads metal mesh. The castings were bonded utilizing Comspan Opaque and Panavia Ex. The specimens were subjected to tensile forces after 24 hours in an Instron machine. The castings subjected to 50 micrograms aluminum oxide abrasive and bonded utilizing Panavia EX showed the biggest bond tensile strength.

Abundância natural do isótopo estável de carbono (13C) de alguns itens alimentares e sua contribuição no crescimento de juvenis de pintado, Pseudoplatystoma corruscans (Agassiz, 1829) (Osteichthyes, Pimelodidae)

The aim of this study is to determine the natural abundance of carbon stable isotope (13C) of some food components and determine its contribution to the pintado juvenile growth, in laboratory conditions. 150 fishes were used with average weight of 1.39 g, and stocked in two net ponds with 125L each, during 60 days. Every 10 days a water sample was collected to analyse phytoplakton and zooplankton. Clacocera was dominant in the analysis of the stomach contents, following Chironomidae and Copepoda. A fish sample was collected in the beginning, and at the end of the experiment to analyses the isotopic signal. An average value of -20.94; -15.36 and -18.81 δ13C%o was obtained for phytoplankton, Cladocera and Chironomidae, respectively. Cladocera was the main carbon source and contribution with carbon average 89.24% in feeding this species, while the Chironomid contribution was 10.76%. The δ13C was effective as carbon tracer in food chain, because the consumer reflects its diet isotopicly.

O limiar de esforço percebido (LEP) corresponde à potência crítica e a um indicador de máximo estado estável de consumo de oxigěnio

The perceived exertion has been a target of several investigations, many times with association with objective physiological indicators in exercise. Recently, the identification of the perceived exertion threshold (PET) was proposed in the water running, which presented no difference in relation to the critical velocity. Theoretically, both parameters would be indicators of the maximum steady state of variables such as V̇O2 and blood lactate. The objective of this work was to verify the coincidence between PET, critical power (PCrit) and an indicator of maximum V̇O2 steady state (PCrit') in cycle ergometer. Eight male participants were submitted to progressive effort test in order to determine V̇O2peak (46.7 ± 8.5 ml/kg/min) and to four rectangular tests until exhaustion for the estimation of the critical power model parameters, PET and PCrit'. The hyperbolic relation between mechanical power and time spent for the V̇O2peak to be reached in each test was used for the PCrit' estimation, considered as the asymptote in the power axis, and the portion of the anaerobic work capacity (CTAnaer) depleted up to the establishment of the V̇O2peak (CTAnaer'). In order to identify PET, the straight lines angular coefficients of the perceived exertion in time (ordinate) and the powers used (abscissa) were adjusted to a linear function that provided a point in the power axis in which the perceived exertion would be kept indefinitely stable. The parameters PCrit and CTAnaer were estimated by means of the power-time non-linear equation. In order to compare the estimations of PET, PCrit and PCrit', the analysis of variance ANOVA for repeated measurements was employed, and the associations were established through the Pearson correlation. CTAnaer and CTAnaer' were compared through the t test. PET (180 W ± 61 W), PCrit (174 W ± 43 W) and PCrit' (176 W ± 48 W) were not significantly different and the correlations were of 0.92-0.98. CTAnaer' (14,080 ± 5,219 J) was lower than CTAnaer (22,093 ± 9,042 J). One concludes that the PET predicts the intensity of PCrit and PCrit' with accuracy.

Influência da contaminação da dentina por cimentos temporários na resistência da união de sistemas adesivos

Objective: The aim of this study was to assess the bond strength of adhesive systems to dentin contaminated by temporary cements with or without eugenol. Method: Flat dentin surfaces were obtained from twenty-four human third molars. With exception of the control group (n=8), the surfaces were covered with Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) or Cavit (3M ESPE, St. Paul, MN, USA) and kept in an oven at 37°C for seven days. After removing the cements, the adhesive systems Adper Single Bond (3M ESPE, St. Paul, MN, USA) or Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan) were applied in accordance with the manufacturers' recommendations, and then the crowns were constructed in of resin composite. The teeth were sectioned into specimens with a cross-sectional bond area of 0.81mm2, which were submitted to microtensile testing in a mechanical test machine at an actuator speed of 0.5mm/min. The data were analyzed by t- and ANOVA tests, complemented by Tukey tests (α=0.05). Results: For Adper Single Bond (3M ESPE, St. Paul, MN, USA), bond strength did not differ statistically (p>0.05) for all the experimental conditions. For Clearfil SE Bond (Kuraray Co. Ltd., Osaka, Japan), only the Interim Restorative Material (Caulk Dentsplay, Milford, DE, USA) Group showed significantly lower bond strength (30.1 ± 13.8 MPa) in comparison with the other groups; control (38.9 ± 13.5 MPa) and Cavit (3M ESPE, St. Paul, MN, USA) (42.1 ± 11.0 MPa), which showed no significant difference between them. Conclusion: It was concluded that the previous covering of dentin with temporary cement containing eugenol had a deleterious effect on the adhesive performance of the self-etching system only.

Recursos naturais na União das Nações Sul-americanas (UNASUL): Situação e tendências para uma agenda de desenvolvimento regional

Incluye Bibliografía

Os mercados de trabalho, a proteção dos trabalhadores e a aprendizagem continuada em uma economia global: Experiências e perspectivas da América Latina e o Caribe

Incluye Bibliografía

Compras governamentais: políticas e procedimentos na Organização Mundial de Comércio, União Européia, NAFTA, Estados Unidos e Brasil

Incluye Bibliografía

Influência de diferentes sistemas adesivos na resistência de união de pinos de fibra à dentina intrarradicular

Objective: To evaluate the influence of three adhesive systems on the bond strength of fiber post luted to root dentine. The hypothesis was that the bond strength is influenced by the adhesive system. Method: The canals of thirty single-root bovine roots (16mm in length) were prepared using the preparation drill (FGM) until 12mm. 14 mm of each root was embedded with acrylic resin and the specimens were allocated into three groups (n=10), considering the factor adhesive (3 levels): Gr1- Scotchbond Multipurpose Plus (3M ESPE), Gr2- One Step (Bisco) and Gr3- Excite DSC (Ivoclar Vivadent). The adhesive systems were applied using a microbrush, according to the manufacture's recommendations. The fiber posts (White Post DC, FGM) were luted with dual resin cement (All-Cem,FGM). After, the cores with composite resin (Llis, FGM) were made and each set of root/post/core was submitted to the mechanical cycling (Erios, Brazil) (10 6 cycles, 84N, 4 Hz, inclination of 45 o, 37 oC, water). Each specimen was cut in 4 samples (1.8mm in thickness), which were submitted to the push-out test in a universal testing machine (ServoPulser - Shimadzu) (50Kgf, 1mm/min). The data (MPa) were analyzed using ANOVA (1-way) and Tukey test (5%). Results: The factor adhesive (P=0.00352) influenced the bond strength significantly (ANOVA). Gr1 (6.8±3.8 MPa) a presented higher bond strength values than Gr2 (3.1±1.5 MPa) b and similar to Gr3 (4.4±3.3) a,b. Moreover, Gr3 and Gr2 were similar between them (Tukey). The hypothesis was accepted. Conclusion: Based on the results it was concluded that chemical and dual polymerization adhesive system should be used for the adhesive luting fiber post procedures.

Reformas das instituições fiscais: reflexões sobre o caso do Brasil

Incluye Bibliografía

Teatro União e Olho Vivo: cultura tradicional e arte popular

Pós-graduação em Artes - IA