Entwicklung und Validierung der Steigbildmethode zur Differenzierung von ausgewählten Lebensmitteln aus verschiedenen Anbausystemen und Verarbeitungsprozessen

Zusammenfassung (deutsch) Seit den 1980iger Jahren wächst die Bedeutung der sog. Bildschaffenden Methoden für die Bestimmung der Qualität ökologischer Produkte. Zu diesen Methoden gehört die Biokristallisation, Steigbild und Rundfilter-Chromatographie. Die Ergebnisse dieser Methoden sind Bilder, die anhand definierter Kriterien ausgewertet werden. Bei der Biokristallisation sind es mehr oder weniger geordnete Kristallisationen auf einer Glasplatte, bei dem Steigbild zweidimensionale Strukturen auf Chromatographiepapier. In der Vergangenheit wurden die Bilder von Spezialisten ausgewertet, die nach einer längeren Schulung produktspezifische Kriterien entwickelt hatten. Im Gegensatz zur Dünnschicht-Chromatographie, wo der einzelne Stoff von der Matrix separiert wird, ist das Ziel beim Steigbild, Strukturen der möglichst ganzen Probe zu erzeugen. Die Methode wurde von Kolisko in den 1929iger Jahren entwickelt, wobei eine Kombination aus Chromatographieprozess und Metallkomplexreaktionen genutzt wurde. Die Firma WALA entwickelte die Methode für die Kontrolle ihrer Produkte und setze Silbernitrat und Eisensulfat ein. Bisher wurde die Methode qualitativ beschreibend ausgewertet, wobei einzelne Bildelemente und deren Interaktion beschrieben wurden. Deshalb musste für die vorliegende Arbeit Auswertungsmethoden entwickelt werden, mit denen auch eine statistische Bearbeitung der Ergebnisse möglich ist (nominale Unterscheidung von proben anhand der Bilder). Die Methode wurde bisher in einer Reihe von Studien eingesetzt (u.a. die Unterscheidung von Produktionsweisen). Obwohl die Bilder nur qualitativ ausgewertet wurden, konnten geschulte Prüfpersonen Proben aus verschiedenen Anbausystemen anhand der Bilder trennen. Die Ergebnisse wurden aber nicht so dokumentiert, dass sie den Erfordernissen internationaler Standardnormen für Laboratorien genügten. Deshalb mussten für diese Arbeit zunächst die Prozeduren dokumentiert und eine systematische Untersuchung zu den Einflussgrößen durchgeführt werden. Dazu wurde die visuelle Bildauswertung entwickelt und standardisiert. Die visuelle Bildauswertung basiert auf morphologischen Kriterien der Bilder von den untersuchten Weizen- und Möhrenproben. Ein Panel aus geschulten Personen entwickelte dann die Kriterien und legte sie anhand von Referenzbildern fest. Die Bilder der vorliegenden Arbeit wurden mit der einfach beschreibenden Prüfung ausgewertet, wie sie aus der sensorischen Prüfung von Lebensmitteln übernommen werden konnte. Mit geschulten und ungeschulten Prüfpersonen wurden Weizenproben und verschiedene Möhrensäfte mit der sog. Dreiecksprüfung ausgewertet (von ISO 4120). Alle Laborprozeduren wurden dokumentiert. Mit der Anwendung dieser Prozeduren wurden Vergleichsversuche mit Laboren in Dänemark und Holland (BRAD, LBI) durchgeführt. Die Ergebnisse waren sowohl für Weizen- als auch für Möhrenproben vergleichbar, wobei alle drei Labore zwischen jeweils zwei Proben unterscheiden konnten. Die systematische Untersuchung zu den Einflussgrößen zeigte, dass das Unterscheidungsvermögen der Methode vor allem von den klimatischen Bedingungen während der Steigphasen beeinflusst wird. Auch die Präkonditionierung der Papiere hat einen großen Einfluss, während die Wasserqualität (ultra-filtriert, de-ionisiert, destilliert) eine untergeordnete Bedeutung hat. Für Weizen- und Möhrenproben wurde sowohl die Wiederholbarkeit als auch die Reproduzierbarkeit getestet. Die Unterschiede in den Bildern der verschiedenen Proben waren dabei immer größer als die Variation durch Proben- und Bildwiederholung und das Labor. Die so charakterisierte Methode wurde auf kodierte Proben von definierten Feldversuchen und auf Marktproben (Paarvergleich von Anbausystemen ökologisch und konventionell) angewandt, wobei als Ergebnis mehr als 90% der Proben mit der einfach beschreibenden Prüfung anhand der Bilder unterschieden werden konnten. Die Auswertung mit der Dreiecksprüfung zeigte, dass sowohl Sorten und Verarbeitungsschritte (Saft) als auch Anbauweisen signifikant getrennt wurden. Darüber hinaus wurde die Methode auch erfolgreich auf Apfelproben angewandt. Weitere Untersuchungen müssen zeigen, ob sich das Potential der Methode, verschiedene Fragen wie die Authentizitätsprüfung von Lebensmitteln verifizieren lassen.

Charakterisierung der mikrobiellen Population und Untersuchungen zum Quorum Sensing in der Rhizosphäre vom Weidelgras (Lolium perenne) auf einer Rückstandshalde der Kaliindustrie

Im Rahmen dieser Dissertation wurden die Dynamik und die Kommunikation innerhalb der mikrobiellen Population der Rhizosphäre von Deutschem Weidelgras (Lolium perenne) untersucht, welches auf einer teilweise rekultivierten Rückstandshalde der Kaliindustrie wuchs. Um die niederschlagsbedingte Auswaschung von Salzen zu reduzieren, wird die Rückstandshalde des Kaliwerks Sigmundshall (in Bokeloh bei Hannover) schrittweise mit dem technogenen Abdecksubstrat REKAL/SAV ummantelt. Dieses weist eine hohe Standfestigkeit und Wasserspeicherkapazität auf und kann zudem begrünt werden, wofür als Pionierpflanze Lolium perenne dient. Durch diese Rekultivierung wird Niederschlag besser gespeichert und über Evapotranspiration wieder in die Luft abgegeben, was letztendlich die Bildung von Salzwasser vermindert. Da das Abdecksubstrat neben alkalischem pH-Wert auch teilweise hohe Schwermetallkonzentrationen aufweist, sollte in der vorliegenden Arbeit erstmals die mikrobielle Rhizosphären-Gemeinschaft in diesem extremen Habitat mittels einer kulturunabhängigen Methode erforscht werden. Zudem wurden erste Untersuchungen angestellt, ob im Substrat die zelldichte-abhängige bakterielle Kommunikation (Quorum Sensing) nachgewiesen werden kann. Mittels extrahierter Gesamt-DNA wurde anhand der 16S rDNA die Analyse des „Terminalen Restriktonsfragmentlängenpolymorphismus“ (TRFLP) verwendet, um die komplexe bakterielle Rhizosphären-Gemeinschaft unter zeitlichen und lokalen Aspekten zu vergleichen. Auftretende Veränderungen bei den bakteriellen Populationen der jeweiligen Proben wurden durch eine Zu- oder Abnahme der auch als Ribotypen bezeichneten terminalen Restriktionsfragmente (TRF) erfasst. Hierbei zeigten sich am Südhang der Halde während der Sommermonate der Jahre 2008 und 2009 zwar Schwankungen in den bakteriellen Gemeinschaftsprofilen, es lagen jedoch keine eindeutigen Dynamiken vor. Im Vergleich zum Südhang der Halde wies der Nordhang eine höhere Ribotyp-Diversität auf, was mit der fortgeschritteneren Rekultivierung dieses Haldenabschnitts zusammenhängen könnte. Zusätzlich wurden Bakterien aus der Rhizosphäre von Lolium perenne isoliert und mithilfe der Biosensoren Agrobacterium tumefaciens A136 pCF218 pCF372 und Chromobacterium violaceum CV026 auf die Produktion von N-Acylhomoserinlactonen (AHLs) überprüft. Diese AHLs werden von Gram-negativen Mikroorganismen als Signalmoleküle verwendet, um ihre Genexpression zelldichteabhängig zu kontrollieren. Von den 47 getesteten Gram-negativen Rhizosphärenisolaten konnten nur bei einem reproduzierbar AHL-Moleküle mithilfe des Reporterstamms A. tumefaciens nachgewiesen werden. Der AHL-Produzent wurde als Pseudomonas fluorescens identifiziert. Mittels dünnschichtchromatographischer Analysen konnten die extrahierten bakteriellen AHL-Moleküle den N-Octanoyl-L-homoserinlactonen zugeordnet werden.

Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays

Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition techniques which has been used are Plasma Enhanced Chemical Vapor Deposition (PECVD), Physical Vapor Deposition (PVD) and Ion Beam Sputter Deposition (IBSD). The thickness of the SiO2 thin layer was kept constant at 150nm for each deposition process. The surface roughness was measured by Stylus Profilometry and Atomic Force Microscopy (AFM). It was found that the layer which was deposited by IBSD has got the minimum surface roughness value and the layer which was deposited by PECVD process has the highest surface roughness value. During the same investigation, the substrate temperature of PECVD was varied from 80° C to 300° C with the step size of 40° C and it was found that the surface roughness keeps on increasing as the substrate holder temperature increases in the PECVD process. A new insulation layer system was proposed to minimize the dielectric breakdown effect in insulation layer for micromirror arrays. The conventional bilayer system was replaced by five layer system but the total thickness of insulation layer remains the same. It was found that during the actuation of micromirror arrays structure, the dielectric breakdown effect was reduced considerably as compared to the bilayer system. In the second step the fabrication process of the micromirror arrays was successfully adapted and transferred from glass substrates to the flexible PEN substrates by optimizing the conventional process recipe. In the last section, a large module of micromirror arrays was fabricated by electrically interconnecting four 10cm×10cm micromirror modules on a glass pane having dimensions of 21cm×21cm.

Simultaneous Drying and Separation of Composite Agricultural Material for Hay Processing

In composite agricultural materials such as grass, tee, medicinal plants; leaves and stems have a different drying time. By this behavior, after leaving the dryer, the stems may have greater moisture content than desired, while the leaves one minor, which can cause either the appearance of fungi or the collapse of the over-dried material. Taking into account that a lot of grass is dehydrated in forced air dryers, especially rotary drum dryers, this research was developed in order to establish conditions enabling to make a separation of the components during the drying process in order to provide a homogeneous product at the end. For this, a rotary dryer consisting of three concentric cylinders and a circular sieve aligned with the more internal cylinder was proposed; so that, once material enters into the dryer in the area of the inner cylinder, stems pass through sieve to the middle and then continue towards the external cylinder, while the leaves continue by the inner cylinder. For this project, a mixture of Ryegrass and White Clover was used. The characteristics of the components of a mixture were: Drying Rate in thin layer and in rotation, Bulk density, Projected Area, Terminal velocity, weight/Area Ratio, Flux through Rotary sieve. Three drying temperatures; 40°C, 60° C and 80° C, and three rotation speeds; 10 rpm, 20 rpm and 40 rpm were evaluated. It was found that the differences in drying time are the less at 80 °C when the dryer rotates at 40 rpm. Above this speed, the material adheres to the walls of the dryer or sieve and does not flow. According to the measurements of terminal velocity of stems and leaves of the components of the mixture, the speed of the air should be less than 1.5 m s-1 in the inner drum for the leaves and less than 4.5 m s-1 in middle and outer drums for stems, in such way that only the rotational movement of the dryer moves the material and achieves a greater residence time. In other hand, the best rotary sieve separation efficiencies were achieved when the material is dry, but the results are good in all the moisture contents. The best rotary speed of sieve is within the critical rotational speed, i.e. 20 rpm. However, the rotational speed of the dryer, including the sieve in line with the inner cylinder should be 10 rpm or less in order to achieve the greatest residence times of the material inside the dryer and the best agitation through the use of lifting flights. With a finite element analysis of a dryer prototype, using an air flow allowing speeds of air already stated, I was found that the best performance occurs when, through a cover, air enters the dryer front of the Middle cylinder and when the inner cylinder is formed in its entirety through a sieve. This way, air flows in almost equal amounts by both the middle and external cylinders, while part of the air in the Middle cylinder passes through the sieve towards the inner cylinder. With this, leaves do not adhere to the sieve and flow along drier, thanks to the rotating movement of the drums and the showering caused by the lifting flights. In these conditions, the differences in drying time are reduced to 60 minutes, but the residence time is higher for the stems than for leaves, therefore the components of the mixture of grass run out of the dryer with the same desired moisture content.

Peeling, healing and bursting in a lubricated elastic sheet

We consider the dynamics of an elastic sheet lubricated by the flow of a thin layer of fluid that separates it from a rigid wall. By considering long wavelength deformations of the sheet, we derive an evolution equation for its motion, accounting for the effects of elastic bending, viscous lubrication and body forces. We then analyze various steady and unsteady problems for the sheet such as peeling, healing, levitating and bursting using a combination of numerical simulation and dimensional analysis. On the macro-scale, we corroborate our theory with a simple experiment, and on the micro-scale, we analyze an oscillatory valve that can transform a continuous stream of fluid into a series of discrete pulses.

Determinação de tetraciclinas em leite por cromatografia de camada fina

As tetraciclinas são compostos antibacterianos utilizados em bovinos de leite para tratamento de doenças infecciosas, como a mastite, mas também como aditivos em ração animal. O uso das tetraciclinas pode conduzir à presença de resíduos destes fármacos no leite, principalmente se não forem utilizados de acordo com as indicações, nem respeitado o período mínimo de eliminação dos antibióticos pelo leite. A presença de resíduos de antibióticos no leite interfere no processo industrial dos seus derivados, podendo inviabilizar a produção destes e, consequentemente, causar igualmente prejuízos económicos, como por exemplo, pela inibição de fermentos lácticos que são culturas de microorganismos utilizados na produção de iogurtes, queijos e outros produtos lácteos. Os resíduos de antibióticos no leite de consumo podem representar riscos à saúde humana, podendo causar reacções alérgicas em indivíduos sensíveis ou ter um efeito adverso na flora intestinal humana, prejudicando a sua acção protectora local, além de propiciar a selecção de populações bacterianas resistentes.(Denobile & Nascimento, 2004)

Wind-tunnel modelling of dispersion from a scalar area source in urban-like roughness

A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ p = λ f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness

Plant roots release phospholipid surfactants that modify the physical and chemical properties of soil

Plant root mucilages contain powerful surfactants that will alter the interaction of soil solids with water and ions, and the rates of microbial processes. The lipid composition of maize, lupin and wheat root mucilages was analysed by thin layer chromatography and gas chromatography-mass spectrometry. A commercially available phosphatidylcholine (lecithin), chemically similar to the phospholipid surfactants identified in the mucilages, was then used to evaluate its effects on selected soil properties. The lipids found in the mucilages were principally phosphatidylcholines, composed mainly of saturated fatty acids, in contrast to the lipids extracted from root tissues. In soil at low tension, lecithin reduced the water content at any particular tension by as much as 10 and 50% in soil and acid-washed sand, respectively. Lecithin decreased the amount of phosphate adsorption in soil and increased the phosphate concentration in solution by 10%. The surfactant also reduced net rates of ammonium consumption and nitrate production in soil. These experiments provide the first evidence we are aware of that plant-released surfactants will significantly modify the biophysical environment of the rhizosphere.

Pollen ultrastructure in anther cultures of Datura innoxia. I. Division of the presumptive vegetative cell.

Ultrastructural features of embryogenic pollen in Datura innoxia are described, just prior to, during, and after completion of the first division of the presumptive vegetative cell. In anther cultures initiated towards the end of the microspore phase and incubated at 28 degrees C in darkness, the spores divide within 24 h and show features consistent with those of dividing spores in vivo. Cytokinesis is also normal in most of the spores and the gametophytic cell-plate curves round the presumptive generative nucleus in the usual highly ordered way. Further differentiation of the 2 gametophytic cells does not take place and the pollen either switches to embryogenesis or degenerates. After 48-72 h, the remaining viable pollen shows the vegetative cell in division. The cell, which has a large vacuole and thin layer of parietal cytoplasm carried over from the microspore, divides consistently in a plane parallel to the microspore division. The dividing wall follows a less-ordered course than the gametophytic wall and usually traverses the vacuole, small portions of which are incorporated into the daughter cell adjacent to the generative cell. The only structural changes in the vegetative cell associated with the change in programme appear to be an increase in electron density of both plastids and mitochondria and deposition of an electron-dense material (possibly lipid) on the tonoplast. The generative cell is attached to the intine when the vegetative cell divides. Ribosomal density increases in the generative cell and exceeds that in the vegetative cell. A thin electron-dense layer also appears in the generative-cell wall. It is concluded that embryogenesis commences as soon as the 2 gametophytic cells are laid down. Gene activity associated with postmitotic synthesis of RNA and protein in the vegetative cell is switched off. The data are discussed in relation to the first division of the embryogenic vegetative cells in Nicotiana tabacum.

Drying method influences the development of germinability, dessication tolerance and subsequent longevity of immature seeds of sumauma (Ceiba pentandra (L.) Gaertn. [Bombacaceae])

The ability to germinate, tolerate desiccation and survive in air-dry storage was investigated during early seed development in planta and subsequent ex planta maturation of sumauma (Ceiba pentandra). Immature fruits were collected on three different dates (i.e. from about 5 days before until 7 days after mass maturity). Immature fresh seeds were not able to germinate. Fruits or seeds were subjected immediately after each collection to three different drying treatments with progressively slower rates of dessication: (i) seeds were extracted from the fruits and dried immediately; (ii) fruits were dried in a thin layer; (iii) fruits were dried in a tied polyethylene bag (with 10 holes of 1cm diameter). Drying was in a room maintained at 25 degrees C +/- 3 degrees C and 65%+/- 5% r.h. For treatment (i) the seeds were dried for 6 days in order to reduce moisture content to around 13% ( +/- 2%) moisture content. For treatments (ii) and (iii) the fruits were subjected to different periods of drying depending upon collection date. The results of these post-collection treatments showed generally that the more immature the seeds the slower the rate of drying that is required to improve ability to germinate, ability to tolerate desiccation and potential longevity, but at the third harvest, 7 days after mass maturity, the intermediate drying rate treatment was the most beneficial. Thus post fruit collection treatments can be modified depending upon the stage of seed development in order to provide good to high quality seeds of sumauma when collection has to be made at a site with difficult access at less than ideal times. The results are relevant to seed collection practices for both forestry and ex situ plant biodiversity conservation.

Concentrations of parabens in human breast tumours

Parabens are used as preservatives in many thousands of cosmetic, food and pharmaceutical products to which the human population is exposed. Although recent reports of the oestrogenic properties of parabens have challenged current concepts of their toxicity in these consumer products, the question remains as to whether any of the parabens can accumulate intact in the body from the long-term, low-dose levels to which humans are exposed. Initial studies reported here show that parabens can be extracted from human breast tissue and detected by thin-layer chromatography. More detailed studies enabled identification and measurement of mean concentrations of individual parabens in samples of 20 human breast tumours by high-pressure liquid chromatography followed by tandem mass spectrometry. The mean concentration of parabens in these 20 human breast tumours was found to be 20.6 +/- 4.2 ng g(-1) tissue. Comparison of individual parabens showed that methylparaben was present at the highest level (with a mean value of 12.8 +/- 2.2 ng g(-1) tissue) and represents 62% of the total paraben recovered in the extractions. These studies demonstrate that parabens can be found intact in the human breast and this should open the way technically for more detailed information to be obtained on body burdens of parabens and in particular whether body burdens are different in cancer from those in normal tissues. Copyright (C) 2004 John Wiley Sons, Ltd.

Identification of lipophilic flavones and flavonols by comparative HPLC, TLC and UV spectral analysis

The identification of lipophilic flavones and flavonols using a combination of high performance liquid chromatography, thin layer chromatography and UV spectral analysis is discussed. Data are provided for the flavones, apigenin, luteolin and tricetin and twelve of their methyl ethers, 8-hydroxyluteolin, 6-hydroxyluteolin and scutellarein and fourteen of their methyl ethers, and some 6,8-dihydroxyapigenin and 6,8-dihydroxyluteolin derivatives. Data for some forty two flavonols with extra 6- and/or 8-hydroxylation, mostly 6-hydroxykaempferol and quercetagetin derivatives, are also presented. The remaining compounds analysed include fourteen 5-deoxyflavones, four 5-methoxyflavones and five 5-deoxyflavonols plus further 5-hydroxylated flavones and flavonols without B-ring oxidation or with 2-, 5- or 6-hydroxylation. Copyright © 2003 John Wiley & Sons, Ltd.

Reversible ageing effects in cryogenically cooled infrared filter radiometers

In this paper we report the observation of drifts in the responsivity of cryogenically cooled InSb detector-based infrared filter radiometers which have very strong wavelength dependence. These drifts can result in the increase or decrease of the response of the filter radiometers by over 5%. The origin of these variations was investigated and was shown to arise due to a thin film of ice formed on the multi-layer bandpass filter used to define the spectral response of the filter radiometer. The thin layer of ice interacts with the characteristics of the filter (which itself consists of a number of thin layers) and modifies the filter spectral transmission thus modifying the response of the filter radiometer of which the filter is part of. These observations are particularly relevant to space instruments which use infrared filter radiometers for earth observation. Debris from the spacecraft engines is known to accumulate on cold surfaces of instruments carried on board. The deposition of this debris on cold filters can modify the spectral response of the instruments, which use these filters to define a spectral response. Crown Copyright (c) 2004 Published by Elsevier B.V. All rights reserved.

On a class of non-self-adjoint periodic eigenproblems with boundary and interior singularities

We prove that all the eigenvalues of a certain highly non-self-adjoint Sturm–Liouville differential operator are real. The results presented are motivated by and extend those recently found by various authors (Benilov et al. (2003) [3], Davies (2007) [7] and Weir (2008) [18]) on the stability of a model describing small oscillations of a thin layer of fluid inside a rotating cylinder.

Isomeric olefin tetracarbonyl complexes of tungsten(I): an infrared spectroelectrochemical study at low temperatures

In situ electrolysis within an optically transparent thin-layer electrochemical (OTTLE) cell was applied at 293-243 K in combination with FTIR spectroscopy to monitor spectral changes in the carbonyl stretching region accompanying oxidation of four tetracarbonyl olefin complexes of tungsten(0), viz., trans-[W(CO)(4)(eta(2)-ethene)(2)], trans-[W(CO)(4)(eta(2)-norbornene)(2)], [W(CO)(4)(eta(4)-cycloocta-1,5-diene)], and [W(CO)(4)(eta(4)-norbornadiene)]. In all cases, the one-electron-oxidized radical cations (17-electron complexes) have been identified by their characteristic nu(CO) patterns. For the bidentate diene ligands, the cis stereochemistry is essentially fixed in both the 18- and 17-electron complexes. The radical cation of the trans-bis(ethene) complex was observed only at 243 K, while at room temperature it isomerized rapidly to the corresponding cis-isomer. The thermal stability of the three studied radical cations in the cis configuration correlates with the relative strength of the W-CO bonds in the positions trans to the olefin ligand, which are more affected by the oxidation than the axial W-CO bonds. For the bulky norbornene ligands, their trans configuration in the bis(norbornene) complex remains preserved after the oxidation in the whole temperature range studied. The limited thermal stability of the radical cations of the trans-bis(alkene) complexes is ascribed to dissociation of the alkene ligands. The spectroelectrochemical results are in very good agreement with data obtained earlier by DFT (B3LYP) calculations.