845 resultados para Teak plantations
Resumo:
ABSTRACT The number of days between anthesis and maturation of conilon coffee berries varies according to the genotype. Thus, it is believed that periods of greater nutrient demand for fruit formation also vary according to the genotype, directly influencing fertilizer management. The goal of this study was to establish accumulation curves for the micronutrients boron, copper, iron, manganese, and zinc in conilon coffee trees with different maturation cycles. The experiment was conducted in Nova Venécia, State of Espírito Santo, Brazil, during the reproductive cycle of the 2010/2011 crop year. Four coffee genotypes with different maturation cycles (early, intermediate, late, and super-late) were studied. A completely randomized experimental design was used with five replications. The treatments correspond to the accumulation of B, Cu, Fe, Mn, and Zn in the berries every 28 days in the period from flowering to harvest. The early, intermediate, and late genotypes accumulated Fe, Cu, and Mn in a similar manner, with sigmoid curves, whereas the super-late genotype accumulated these nutrients exponentially. Zn was accumulated by all four genotypes following a sigmoid curve. The early, intermediate, and late genotypes accumulated B linearly, whereas the super-late genotype accumulated B following a sigmoid curve. The maturation cycle of the genotype must be taken into account to apply the correct rate of micronutrient fertilization in coffee plantations.
Resumo:
ABSTRACT Soil tillage that maintains the productivity of sugarcane plantations, providing an area for the root development and without traffic on crop rows, has given rise to new technologies in rural areas. The purpose of this study was to evaluate the soil physical properties in two sugarcane plantations, one of which was prepared with deep tilling and the other with conventional tillage. The experiment was conducted in Lençóis Paulista, São Paulo State. Soil penetration resistance and relative density were analyzed. The cone index was lower in deep-tilled soil without traffic in all layers, than in deep-tilled soil with traffic and in conventional tillage. In both tillage treatments, the relative density values were acceptable in the 0.00-0.15 m soil layer, but considered detrimental for sugarcane development in the 0.15-0.30 and 0.30-0.45 m layers.
Resumo:
RESUME DE LA THESE Le but de cette thèse est d'analyser la réforme générale de l'Etat au Cameroun et au Gabon par les institutions de Bretton Woods sur une période de vingt ans (1987-2007). Pour ce faire, mon travail consiste à étudier le rôle majeur joué par les différentes mesures économiques impulsées dans les pays par le Fonds Monétaire International (FMI) et la Banque Mondiale. Il s'agit de voir si les différentes réformes d'ajustement que ces institutions ont imposé au Cameroun et au Gabon ont produit des effets positifs en vue de solution la crise économique qui s'y installait durablement et remettre ces Etats sur le sentier de la croissance et du développement. L'avènement de la crise économique qui sévissait dans les pays au milieu des années 1980 montrait que le modèle développementaliste expérimenté par ces Etats n'avait expérimenté contribué qu'à provoquer la paralysie de l'appareil de production. Les causes profondes résidaient dans l'omniprésence de l'Etat qui privilégiait une logique administrative au dépend de celle de production au point de nuire gravement aux politiques interventionnistes étatiques. A cela, s'ajoutaient d'autres facteurs endogènes et exogènes aux Etats comme la mauvaise gestion couplée à la forte corruption et au clientélisme politique, la contrebande et le dumping, l'effritement du secteur agricole dû au vieillissement des plantations et à la sous-mécanisation, l'explosion démographique, la détérioration des termes de l'échange, le chômage endémique et galopant, etc. En ayant recours aux réformes d'ajustement structurel du FMI et de la Banque Mondiale, les gouvernements camerounais et gabonais entendaient lutter contre les rigidités institutionnelles et les distorsions structurelles qui empêchaient leurs économies de répondre aux signaux du marché et d'accroître l'offre d'une part. Et, d'autre part, les réformes d'ajustement devaient permettre de renforcer la concurrence des produits sur les marchés, accroître les capacités d'adaptation des marchés de facteurs et améliorer l'efficacité et l'efficience du secteur public. Mais avant d'analyser les réformes d'ajustement dans les pays j'ai d'abord présenté dans une première partie, l'évolution sociopolitique et économique des deux pays. Cette partie donne à l'analyse une profondeur historique indispensable et rend compte de l'évolution des politiques sectorielles des Etats marquée par une phase de croissance (1960-1984), puis par une phase de décroissance ou de crise qui commence à partir de 1985. La seconde partie met en évidence les politiques d'ajustement structurelle principalement axées sur la régulation monétaire, financière et budgétaire, la réforme de la fonction publique, la réforme agricole, le désengagement de l'Etat du secteur productif national et les privatisations. Je termine cette seconde partie par un bilan contrasté que je dresse de l'impact de ces réformes dans les économies camerounaises et gabonaises. La troisième partie met en évidence les nouvelles orientations stratégiques des institutions de Bretton Woods en partant de l'agenda politique des réformes au Cameroun et au Gabon. Elle fait intervenir une batterie de réformes portant sur l'initiative Pays Pauvres Très Endettés (PPTE), les Documents de Stratégie pour la Réduction de la Pauvreté (DSRP), l'Evaluation Politique et Institutionnelle du Pays (EPIP) et la «Bonne Gouvernance». Cette thèse s'achève par une conclusion exhaustive mettant en évidence les insuffisances des modèles théoriques et conceptuels fondant l'ajustement structurel et la remise en cause des nouvelles stratégies de lutte contre la pauvreté impulsées par le FMI et la Banque Mondiale dans les pays d'une part. D'autre part, j'observe une faiblesse institutionnelle de l'Etat dans ces pays qui se résume à la mauvaise gouvernance ; à l'absence d'un cadre et des outils appropriés pour la gestion économique et stratégique du développement à long terme ; à l'impunité généralisée et à l'inefficacité des mesures de lutte contre la pauvreté ; à l'absence d'un Etat de droit et à l'autoritarisme des régimes en place.
Resumo:
Cell suspensions of a human mammary carcinoma cellline (BT 20), wh en injected subcutaneously into nude athymie mice (BALB/c NujNu), produced tumor nodules at the injection site. Subsequent seriai transM plantations also gave rise to neoplastic nodules after latency periods averaging 3 weeks. The nodules displayed morphologie and functional characteristics comparable to those of the original tumor cells. Metastases, however, were not observed in any of the tumor-bearing mice.
Resumo:
Pinus caribaea var. hondurensis (Sénécl) Barr. & Golf. is a tropical pine that naturally occurs in lowland areas of Belize, El Salvador, Guatemala, Honduras, Nicaragua, and eastern Mexico. It has been one of the most studied tropical pines and the one with the most commercial importance in Brazil. The objective of this work was to select the best provenances for plantations and best trees in families for the establishment of seed orchards. For that a trial with five provenances and 47 open-pollinated families was planted near Planaltina, Federal District, in the Cerrado Region of Brazil. The provenances tested were Poptun (Guatemala), Gualjoco, Los Limones, El Porvenir and Santa Cruz de Yojoa (Honduras) and assessed at 12 years of age. Poptun and Gualjoco had larger volume, and Los Limones and El Porvenir the lowest incidence of forks and foxtails. Individual tree heritabilities for volume, stem form and branch diameter were 0.34, 0.06, and 0.26 respectively. More than 90% of the trees had defects, common in unimproved P. caribaea. Selection criteria for quality traits need to be relaxed in the first generation of breeding to allow for larger genetic gains in productivity. Results from this test compared with P. caribaea var. hondurensis trials in other Brazilian, Colombian and Venezuelan sites suggest that provenance x site and family x site interactions are not as strong as in other pine species.
Resumo:
Species of the Trichogramma genus are among the most important ones for biological control. The objective of this research was to evaluate parasitism potential of two species of Trichogramma on eggs of Anagasta kuheniella through life fertility table, at temperatures between 15ºC and 35ºC. These species were collected in the State of Espírito Santo parasitising eggs of the avocado defoliator Nipteria panacea. Trichogramma pretiosum and T. acacioi showed adequate reproductive potential between 15ºC and 35ºC which indicates possibilities of using them in biological control programs in avocado plantations.
Resumo:
Collembolan communities in conifer plantations (Japanese cedar, Cryptomeria japonica) and secondary deciduous broad-leaved forests of varying ages were investigated to determine the extent to which forest conversion (broad-leaved to coniferous) affects the species richness and assemblage composition of Collembola in central Japan. Density and total species richness of Collembola not differed between the broad-leaved and cedar forests except immediately after clear-cutting. The amount of forest-floor organic matter was larger in cedar forests and positively correlated with the species richness of detritus feeders. Species richness of fungal feeders and sucking feeders positively correlated with the species richness of forest-floor plants. There was difference in collembolan species composition between the forest types. The age of the forests seemed to have only small importance for the collembolan community, except during the first four years after clear-cutting. The conversion to artificial cedar stands has not reduced the abundance or species richness of collembolan communities, but has affected community composition. Differences in species composition may be related to the ground floras.
Resumo:
The objective of this work was to clarify whether the method to extract nematodes from European soils is suitable for forest soils and litter in the eastern of Paraná state, Brazil, and whether nematode abundance differs between sites with different ecosystems and levels of human interference. The study sites were situated in the coastal area of the Serra do Mar, near the town of Antonina, in Eastern Paraná, Brazil. Cobb's sieving and decanting method was more appropriate than ISO method, since extraction efficiency was higher and intra-sample variability was significantly lower. In order to achieve an extraction efficiency higher than 90%, Cobb's method was modified. For the extraction of nematodes from litter, the Baermann funnel, with an extraction time of 48 hours, yielded an extraction efficiency higher than 90%. Nematode abundance in litter was higher than in soil. The mean number of individuals extracted from the litter increased with the age stage of the forest sites sampled, and there was no difference in the number of individuals in the soil of the four forest sites. Mean nematode abundance in soil in banana plantations was about twice as high compared to the banana-palmito mixed stands and to the forest sites.
Resumo:
The objective of this work was to evaluate the performance of 15 clones of the IAC 500 series of Hevea brasiliensis, developed at Instituto Agronômico (IAC), over a 12-year period, in the northwest region of São Paulo State, Brazil. The 15 new clones evaluated are primary clones obtained from selected ortets within half-sib progenies. The clone RRIM 600, of Malaysian origin, was used as the control. Dry rubber yield performance over a four-year period, mean girth at the tenth year, girth increment before and during tapping, thermal properties of the natural rubber produced and other characters of the laticiferous system were evaluated. Forty percent of the clones were superior in comparison to the control for yield. Clone IAC 500 recorded the highest yield (66.81 g per tree per tapping) over four years of tapping, followed by IAC 502 (62.37 g per tree per tapping), whereas the control recorded 48.71 g per tree per tapping. All selected clones were vigorous in growth. The natural rubber from this IAC clones showed thermal stability up to 300ºC. No differences were observed in the thermal behavior of rubber among the IAC series and the RRIM 600 clones. The clones IAC 500, IAC 501, IAC 502, IAC 503 and IAC 506 are the more promising for small-scale plantations, due to growth and yield potential.
Resumo:
Abstract:The objective of this work was to develop and validate a prognosis system for volume yield and basal area of intensively managed loblolly pine (Pinus taeda) stands, using stand and diameter class models compatible in basal area estimates. The data used in the study were obtained from plantations located in northern Uruguay. For model validation without data loss, a three-phase validation scheme was applied: first, the equations were fitted without the validation database; then, model validation was carried out; and, finally, the database was regrouped to recalibrate the parameter values. After the validation and final parameterization of the models, a simulation of the first commercial thinning was carried out. The developed prognosis system was precise and accurate in estimating basal area production per hectare or per diameter classes. There was compatibility in basal area estimates between diameter class and whole stand models, with a mean difference of -0.01 m2ha-1. The validation scheme applied is logic and consistent, since information on the accuracy and precision of the models is obtained without the loss of any information in the estimation of the models' parameters.
Resumo:
Cultivation of black truffle, Tuber melanosporum Vitt., has become an important agricultural alternative in rural Mediterranean regions due to its success in relatively harsh conditions, its high market value and diminishing production in natural areas. In addition, truffle cultivation requires relatively low agricultural inputs, promotes reforestation and economic restoration of rural lands and land-use stability. However, there remain major issues regarding the management practices to ensure successful black truffle production. We therefore conducted an experiment to evaluate 3 levels of irrigation based on monthly water deficit and the effects of currently applied weed control systems and fertilization. Treatment effects were evaluated by examining the mycorrhizal status of out-planted 1-yr-old Quercus ilex L. seedlings and seedling growth parameters after 18 months in 3 distinct experimental truffle plantations located in the foothills of the Spanish Pyrenees. We found that replacing one-half of the water deficit of the driest month (moderate irrigation) promoted the proliferation of T. melanosporum mycorrhizae, while high irrigation reduced fine root production and truffle mycorrhizae. Glyphosate weed control improved seedling survival by up to 16% over control seedlings without jeopardizing truffle mycorrhizae in the first year. Fertilization did not improve seedling growth or influence its mycorrhizal status. We describe the persistent relationship between this ectomycorrhizal fungus and Q. ilex by quantifying old and new mycorrhizae and we discuss the ecological implications of the symbiosis.
Resumo:
Due to the low genetic variability reported in the commercial plantations of papaya (Carica papaya L.), the objective of this study was analyze the genetic diversity of 32 genotypes including cultivars, landraces, inbred lines, and improved germplasm using the AFLP technique (Amplified Fragment Length Polymorphism). The genetic distance matrix was obtained using the Nei and Li genetic distance and clustering was performed using the unweighted pair-method with arithmetic mean (UPGMA). Using 11 combinations of EcoRI/MseI primers, 383 polymorphic bands were obtained. On average, 34.8 polymorphic bands were obtained per primer combination. Five clusters were formed. The traditional cultivar 'Sunrise' and the inbred line CMF-L30-08 were the closest genotypes, and the improved germplasm (CMF041) and landrace (CMF233) the most distant. The main papaya cultivars commercially grown in Brazil, as well as four inbred lines and three improved germplasm, were clustered together, however, were not grouped in the same branch. The genetic distance between the Sunrise and Golden cultivars was 0.329, and even arising from mutation and selection within the Sunrise variety, the Golden stores considerable genetic variability. Additional variability was observed in the inbred lines derived from papaya breeding program at Embrapa Cassava and Fruits.
Resumo:
Seloste artikkelista: Marjokorpi, A. & Salo, J., 2007. Operational standards and guidelines for biodiversity management in tropical and subtropical forest plantations - how widely do they cover an ecological framework? Silva Fennica 41 ( 2) : 281-297
Resumo:
Boletus edulis Bull. is one of the most economically and gastronomically valuable fungi worldwide. Sporocarp production normally occurs when symbiotically associated with a number of tree species in stands over 40 years old, but it has also been reported in 3-year-old Cistus ladanifer L. shrubs. Efforts toward the domestication of B. edulis have thus focused on successfully generating C. ladanifer seedlings associated with B. edulis under controlled conditions. Microorganisms have an important role mediating mycorrhizal symbiosis, such as some bacteria species which enhance mycorrhiza formation (mycorrhiza helper bacteria). Thus, in this study, we explored the effect that mycorrhiza helper bacteria have on the efficiency and intensity of the ectomycorrhizal symbiosis between C. ladanifer and B. edulis. The aim of this work was to optimize an in vitro protocol for the mycorrhizal synthesis of B. edulis with C. ladanifer by testing the effects of fungal culture time and coinoculation with the helper bacteria Pseudomonas fluorescens Migula. The results confirmed successful mycorrhizal synthesis between C. ladanifer and B. edulis. Coinoculation of B. edulis with P. fluorescens doubled within-plant mycorrhization levels although it did not result in an increased number of seedlings colonized with B. edulis mycorrhizae. B. edulis mycelium culture time also increased mycorrhization levels but not the presence of mycorrhizae. These findings bring us closer to controlled B. edulis sporocarp production in plantations.
Resumo:
The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.