Short-term successional dynamics of a macroalgal community in a stream from northwestern São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using kinematic characteristics of lepton plus jets events

We present a measurement of the top quark pair production cross section in p (p) over bar collisions at root s=1.96 TeV utilizing 425 pb(-1) of data collected with the D0 detector at the Fermilab Tevatron Collider. We consider the final state of the top quark pair containing one high-p(T) electron or muon and at least four jets. We exploit specific kinematic features of t (t) over bar events to extract the cross section. For a top quark mass of 175 GeV, we measure sigma(t (t) over bar)=6.4(-1.2)(+1.3)(stat)+/- 0.7(syst)+/- 0.4(lum) pb, in good agreement with the standard model prediction.

Rescaled range analysis of pluviometric records in SA o pound Paulo State, Brazil

This paper presents an analysis of pluviometric precipitation time series obtained from 45 data collection points, with daily rain measurements (in mm), from 45 counties within the nine climatic regions of the state of SA o pound Paulo, mostly for the period of 1950-1997. SA o pound Paulo State (Brazil) is situated between the inter-tropical climatic zone, dominated by tropical and equatorial masses, and the sub-tropical climatic zone controlled by tropical and polar air masses. Due to this location the State can be divided into three climatic zones: south-east and south-west, which are permanently humid, and north with a well defined dry period. Rescaled range analysis, or R/S analysis, has been used to investigate the scale properties of the time series. We found two clear values for the Hurst exponent, one for a period of 10 to 200 days (H(1)), and another for a period above 210 days (H(2)). The value of H(1) lies between 0.6 to 0.7 for all climatic zones indicating characteristics of persistence. However, H(2) is (i) close to 0.5 for the littoral area, showing random characteristics, (ii) close to 0.6 for mountain areas, indicating persistence characteristics, and (iii) close to 0.4 for the plane area, irrespective of whether the climate is dry or humid, and shows anti-persistence characteristics.

Electron microprobe and Raman spectroscopic investigation of monazite from chromitites of Cedrolina (Goias State, Brazil)

Monazite from chromitites of Cedrolina (Goias State, Brazil) was investigated by electron microprobe and Raman spectroscopy. Monazite has been rarely encountered in chromitites. In Brazil, it was previously reported from chromitites of the Campo Formoso layered intrusion. Comparison between the two occurrences indicates similar morphology and textural characteristics, but remarkable differences in chemical composition. In both cases, monazite occurs as irregular grains (up to 200 mu m) preferentially located in the chlorite-serpentine matrix of the chromitite, more rarely included in chromite. However, the monazite from Cedrolina is characterized by higher Ce/La ratio, and Pr, Nd, Th contents, compared with the monazite from Campo Formoso. The obtained Raman spectra are very similar in the two cases, suggesting that the compositional variation of monazites and the spectral resolution of the Raman do not allow a conclusive chemical analysis with Raman spectra. Textural evidence indicates that, in both occurrences, monazite precipitation did not take place at high temperature, concomitantly with the host chromitite. In the Campo Formoso chromitites, precipitation of monazite has been related with percolation of hydrothermal, aqueous and acid fluids emanating from a granite batholith. on the contrary, the Cedrolina monazite probably formed during one of the metamorphic events that affected the area in which the host chromitite occurs.

Micromorphology and spectroscopic characteristics of organic matter in waterlogged podzols of the upper Amazon basin

In waterlogged environments of the upper Amazon basin, organic matter is a major driver in the podzolisation of clay-depleted laterites, especially through its ability to weather clay minerals and chelate metals. Its structure in eight organic-rich samples collected at the margin and in the centre of the podzolic area of a soil sequence was investigated. The samples illustrate the main steps in the development of waterlogged podzols and belong either to eluviated topsoil A horizons or to illuviated subsoil Bhs, Bh and 2BCs horizons. Organic matter micromorphology was described, and the overall molecular structure of their clay size fractions was assessed using Fourier transform infrared (FTIR) spectroscopy and cross polarization/magic angle spinning (CP/MAS) C-13 nuclear magnetic resonance (NMR). Organic features of the horizons strongly vary both vertically and laterally in the sequence. Topsoil A horizons are dominated by organic residues juxtaposed to clean sands with a major aliphatic contribution. In the subsoil, numerous coatings, characteristic of illuviation processes, are observed in the following horizons: (i) At the margin and bottom parts of the podzolic area, dark brown organic compounds of low aromacity with abundant oxygen-containing groups accumulate in Bhs and 2BCs horizons. Their spectroscopic features agree with the observation of cracked coatings in 2BCs and the presence of organometallic complexes, whose abundance decreases towards low lying positions. (ii) By contrast, black organic compounds of high aromacity with few chelating functions accumulate as coatings and infills in the overlying sandy Bh horizon of well-expressed waterlogged podzols. (c) 2008 Elsevier B.V. All rights reserved.

Aspects of solid state formation and properties of Sn(0.9)Ti(0.1)O(2) system doped with CoO and Nb(2)O(5)

The effect of calcination temperature during the formation of the solid solution Sn(0.9)Ti(0.1)O(2) doped with 1.00 mol % CoO and 0.05 mol % Nb(2)O(5) is presented. The structural characteristics of this system were studied using X-ray diffraction, and the changes in phase formation were analyzed using the Rietveld method. With an increase in calcination temperature, there is increasing miscibility of Ti into the (Ti,Sn)O(2) phase and near 1000 degrees C, and the remaining TiO(2) (anatase) was transformed into the rutile phase. The sintering process, monitored using dilatometry, suggests two mass transport mechanisms, one activated close to 900 degrees C associated with the presence of TiO(2) (anatase) and the second mechanism, occurring between 1200 and 1300 degrees C, is attributed to a faster grain boundary diffusion caused by oxygen vacancies. (C) 2008 International Centre for Diffraction Data.

Bat rabies in the north-northwestern regions of the state of São Paulo, Brazil: 1997-2002

OBJETIVO: Os relatos sobre a ocorrência de raiva em morcegos no Brasil são esporádicos e isolados. Assim, o objetivo do estudo foi descrever a detecção do vírus da raiva em morcegos do Estado de São Paulo. MÉTODOS: Foram analisados 7.393 morcegos provenientes de 235 municípios do norte e noroeste do Estado de São Paulo, no período de 1997 a 2002 e identificados por meio de características morfológicas e morfométricas. Para a detecção do antígeno viral foi utilizada a técnica de imunofluorescência direta e o isolamento do vírus foi realizado por inoculação em camundongos. RESULTADOS: Das amostras examinadas, 1,3% foram positivas para raiva, com variação de 0,2% em 1997 a 1,6% em 2001. Foram encontrados 98 morcegos com o vírus, 87 deles em área urbana. O vírus da raiva foi detectado pela imunofluorescência direta em 77 do total de amostras positivas, enquanto 92 produziram doença em camundongos inoculados e o período de incubação variou entre 4-23 dias. em 43 municípios foi encontrado pelo menos um morcego positivo. Entre as espécies analisadas o vírus da raiva foi detectado com maior freqüência (33,7%) em Artibeus lituratus. Os vespertilionideos do gênero Eptesicus e Myotis totalizaram 24,5% dos morcegos positivos e as espécies do gênero Molossus (Molossus molossus e Molossus rufus), 14,3%. A distribuição do vírus da raiva foi semelhante entre fêmeas (33; 48,5%) e machos (35; 51,5%). CONCLUSÕES: Morcegos positivos para raiva foram encontrados em situações que colocam em risco tanto a população humana como animais de estimação, exigindo medidas voltadas para o manejo destas espécies e de educação da população.

Phytoseiid mites (Acari : Phytoseiidae) on Myrtaceae in the State of São Paulo, Brazil

Eighteen predatory mite species of the family Phytoseiidae are reported from three sites of the Cerrado ecosystem in the State of São Paulo, southeastern Brazil, on seven plant species of the family Myrtaceae. This paper provides a list of those species and compares relevant morphological characteristics of the specimens collected with those of the original descriptions and/or redescriptions of the corresponding species. A key is provided to help in the separation of the species mentioned in the paper. Some of the species collected have been reported as common predators on dominant crops in the region where the work was done. Their occurrence on Myrtaceae plants found naturally in the Cerrado ecosystem indicates that those plants could represent important reservoirs of those predators.

Control of retention and fatigue-free characteristics in CaBi4Ti4O15 thin films prepared by chemical method

Ferroelectric CaBi4Ti4O15 (CBTi144) thin films were deposited on Pt/Ti/SiO2/Si substrates by the polymeric precursor method. The films present a single phase of layered-structured perovskite with polar axis orientation after annealing at 700 degrees C for 2 h in static air and oxygen atmosphere. The a/b-axis orientation of the ferroelectric film is considered to be associated with the preferred orientation of the Pt bottom electrode. It is noted that the films annealed in static air showed good polarization fatigue characteristics at least up to 10(10) bipolar pulse cycles and excellent retention properties up to 10(4) s. on the other hand, oxygen atmosphere seems to be crucial in the decrease of both, fatigue and retention characteristics of the capacitors. Independently of the applied electric field, the retained switchable polarization approached a nearly steady-state value after a retention time of 10 s. (C) 2006 Elsevier B.V. All rights reserved.

Microhabitat and plant structure of Characeae (Chlorophyta) populations in streams from São Paulo State, southeastern Brazil

Microhabitat distribution was investigated in five populations of Characeae (two of Chara guairensis, two of Nitella subglomerata and one of Nitella sp.) to determine the distributional patterns, the morphometric and reproductive adaptations to varying environmental conditions and niche width on a scale of few centimeters. Variations in physical variables revealed some general trends of microhabitat distribution for the Characeae populations studied, with occurrence under the following conditions: slow and narrow current velocities; substrata predominantly composed of small particle size (sand-clay); variable and generally low depths. In terms of morphological adaptations, we found some general patterns: plants with longer whorl branchlets also had longer internodes in all populations studied, whereas longer plants had also thicker axis. The former were generally associated with higher biomass (percent cover). Few correlations of morphological characters were observed with environmental variables (e.g. plant length with irradiance: negative in two populations and positive in one population). Despite the general patterns of occurrence mentioned above, our results also indicated that each population differed in its responses to environmental variables and had particular morphological and reproductive adaptations. The Characean populations occurred under a narrower range of microhabitat conditions than other macroalgae from lotic habitats, particularly lower current velocity (6.7-9.8 cm s(-1)) and a more specific substratum type (sand-clay). Niche width values (0.60-0.99) of the Characeae populations studied indicate a high degree of habitat specialization and are among the highest yet found in lotic macroalgae. The relatively narrow variations in microhabitat conditions and high niche widths here reported for Characean populations, suggest a lower tolerance to variations in current velocity, depth, irradiance and substratum type. These characteristics probably explain the relatively restricted distribution of Characeae species in streams of S (a) over tildeo Paulo State with low frequency of records in most regions.

UV-visible absorption characteristics of TEOS-derived and Cr-doped silica sonogels aged in different pH solutions and heat treated up to 600 degrees C

Cr-doped xerogels were obtained by sol-gel process from the acid-catalyzed and ultrasound-stimulated hydrolysis of tetraethoxysilane (TEOS) with addition of CrCl3.6H(2)O in water solution during the liquid step of the process. The gels were aged immersed in different pH solutions for about 30 days, after that they were allowed to dry. The samples were annealed at temperatures ranging from 40 to 600degreesC and analyzed by UV-visible absorption spectroscopy. Cr3+ is the preferable oxidation state of the chromium ion in the gels annealed up to 250-300degreesC, in the case of aging in solutions of pH=5 and 11. A high UV absorption below similar to320 nm, due to the host gel, and different absorption bands, depending on the temperature, due to the chromium ion were observed in the xerogels at temperatures below similar to250degreesC, in the case of aging in solutions of pH=1 and 2. These absorption bands have not been assigned. Above 300degreesC up to 600degreesC, Cr5+, and possibly Cr6+, are the preferable oxidation states of the chromium ion independent of the pH of the aging solution, so the xerogels turn to a yellowish appearance in all cases.

A new titanosaur from western São Paulo State, Upper Cretaceous Bauru Group, south-east Brazil

Material from a new titanosaur from the Bauru Basin (Bauru Group), Brazil is described and compared with well-known titanosaurs. Adamantisaurus mezzalirai gen. et sp. nov. is based on six articulated anterior caudal vertebrae and two haemapophyses collected from the Adamantina Formation, which is considered to be Campanian-Maastrichtian? in age. Adamantisaurus mezzalirai is characterized by the following combination of characteristics: anterior caudal vertebrae with straight or slightly backwardly-projecting neural spines with strongly expanded distal ends, stout prespinal lamina, very wide pre- and postzygapophyseal articular facets, and concave postzygapophyseal articular facets on anterior caudal vertebrae. Although our cladistic analysis has produced equivocal results, Adamantisaurus mezzalirai shares with DGM 'Series B' (Peiropolis titanosaur) and Aeolosaurus the presence of postzygapophyses with concave articular facets, and shares with DGM 'Series B' the presence of laterally expanded neural spines and stout prespinal lamina. Additionally, A. mezzalirai shares with DGM 'Series' C (other titanosaur from Peiropolis) the presence of short neural spines.

Study of electrical, chemical and structural characteristics of superconductor thin film obtained by polymeric precursors method

Superconductor films of the BSCCO system have been grown by dip coating technique with good success. The chemical method allows us to grow high temperature superconductor thin films to get better control of stoichiometry, large areas and is cheaper than other methods. There is a great technological interest in growth oriented superconductor films due anisotropic characteristics of superconductor materials of high critical temperature, specifically the cuprates, as we know that the orientation may increase the electrical transport properties. Based on this, the polymeric precursor method has been used to obtain thin films of the BSCCO system. In this work we have applied that method together with the deposition technique known as dip coating to obtain Bi-based superconductor thin films, specifically, Bi1.6Pb0.4Sr2.0C2.0Cu3.0Ox+8, also known as 2223 phase with a critical temperature around 110 K. The films with multilayers have been grown on crystalline substrates of LaAlO3 and orientated (100) after being heat treated around 790 degrees C - 820 degrees C in lapse time of 1 hour in a controlled atmosphere. XRD measurements have shown the presence of a crystalline phase 2212 with a critical temperature around 85 K with (001) orientation, as well as a small fraction of 2223 phase. SEM has shown a low uniformity and some cracks that maybe related to the applied heat treatment. WDS has also been used to study the films composition. Different heat treatments have been used with the aim to increase the percentage of 2223 phase. Measurements of resistivity confirmed the presence of at least two crystalline phases, 2212 and 2223, with T-c around 85 K and 110 K, respectively.

Retention characteristics in Bi3.25La0.75Ti3O12 thin films prepared by the polymeric precursor method

Ferroelectric Bi3.25La0.75Ti3O12 (BLT) thin films were deposited on Pt/Ti/SiO2/Si substrates by the polymeric precursor method. The films present c-axis preferred orientation after annealing at 700 degrees C for 2 h in conventional furnace. All the capacitors showed good polarization fatigue characteristics at least up to 1x10(10) bipolar pulse cycles and excellent retention properties up to 1x10(4) s. We found that the polarization loss is insignificant with five write/read voltages at a waiting time of 10 000 S. Independently of the applied electric field the retained switchable polarization approached a nearly steady-state value after a retention time of 10 s. (C) 2005 American Institute of Physics.

The characteristics of a test liquid formulation for use in evaluating the performance of handling and metering systems

Injection metering systems are an important option for the development of pesticide application equipment, with advantages relating to minimising the need for disposal of unused pesticide, improving the ease of cleaning and optimising the accuracy of chemical application. For all injection systems, characteristics such as the steady-state accuracy of delivered dose, dose stability and the time response for dose step changes are related to the ability of the system to operate with different chemical formulations. A system designed to inject liquids should be able to accommodate changes in viscosity and density. The aim of this study was to develop a methodology for testing chemical injection systems using liquids with different viscosities. The experimental arrangement simulating applications with injection metering systems used dye and salt solutions as tracers. Tests were conducted to analyse the influence of salt on the characteristics of the water and a viscous solution. Results showed that the salt interfered with the dye stability in the water solution. In tests with a viscous test liquid, the salt was introduced at different steps during the mixing process, providing four different liquids to be analysed in terms of viscosity, density and pH. Some differences in liquid characteristics were found which could influence the performance of the injection systems.