Effects of physical and psychological stressors on adolescents’ cortisol levels and self-perceived stress in school

Both, psychosocial stress and exercise in the past have been used as stressors to elevate saliva cortisol and change state anxiety levels. In the present study, high-school students at the age of 14 were randomly assigned to three experimental groups: (1) an exercise group (n = 18), that was running 15 minutes at a medium intensity level of 65-75% HRmax, (2) a psychosocial stress group (n = 19), and (3) a control group (n = 18). The psychosocial stress was induced to the students by completing a standardized intelligence test under the assumption that their IQ scores would be made public in class. Results display that only psychosocial stress but not exercise was able to significantly increase cortisol levels but decreased cognitive state anxiety in adolescents. The psychosocial stress protocol applied here is proposed for use in future stress studies with children or adolescents in group settings, e.g., in school.

Toxic Stress and Child Hunger Over the Life Course: Three Case Studies

The causes and contexts of food insecurity among children in the U.S. are poorly understood because the prevalence of food insecurity at the child level is low compared to the prevalence of household food insecurity. In addition, caregivers may be reluctant to admit their children may not be getting enough food due to shame or fear they might lose custody of their children. Based on our ongoing qualitative research with mothers of young children, we suggest that food security among children is related to adverse childhood experiences of caregivers. This translates into poor mental and physical health in adolescence and adulthood, which can lead to inability to secure and maintain meaningful employment that pays a living wage. In this paper we propose that researchers shift the framework for understanding food insecurity in the United States to adopt a life course approach. This demands we pay greater attention to the lifelong consequences of exposure to trauma or toxic stress—exposure to violence, rape, abuse and neglect, and housing, food, and other forms of deprivation—during childhood. We then describe three case studies of women from our ongoing study to describe a variety of toxic stress exposures and how they have an impact on a woman’s earning potential, her mental health, and attitudes toward raising children. Each woman describes her exposure to violence and deprivation as a child and adolescent, describes experiences with child hunger, and explains how her experiences have shaped her ability to nourish her children. We describe ways in which we can shift the nature of research investigations on food insecurity, and provide recommendations for policy-oriented solutions regarding income support programs, early intervention programs, child and adult mental health services, and violence prevention programs.

Associations of self-compassion and global self-esteem with positive and negative affect and stress reactivity in daily life: Findings from a smart phone study

The present study examined trait self-compassion and trait self-esteem in relation to positive (PA) and negative affect (NA), as well as their associations with stress reactivity in daily life. One hundred and one subjects completed questionnaires on perceived stress and affect twice a day for 14 consecutive days on smart phones. Results indicated that self-compassion and global self-esteem were positively related to PA and negatively to NA. After controlling for self-esteem, self-compassion remained significantly associated with PA and NA, whereas self-esteem was no longer associated with PA and NA after controlling for self-compassion. Furthermore, results indicated that self-compassion buffered the effect of stress on NA, whereas this was not the case for global self-esteem. Neither self-compassion nor self-esteem moderated the relation of stress on PA in separate models. The results of the present study add to the growing literature regarding beneficial relations of self-compassion and psychological well-being and further emphasize the distinction of self-compassion and global self-esteem.

Metamorphosis of human lumbar vertebrae induced by VEPTR growth modulation and stress shielding

INTRODUCTION Distraction-based spinal growth modulation by growing rods or vertical expandable prosthetic titanium ribs (VEPTRs) is the mainstay of instrumented operative strategies to correct early onset spinal deformities. In order to objectify the benefits, it has become common sense to measure the gain in spine height by assessing T1-S1 distance on anteroposterior (AP) radiographs. However, by ignoring growth changes on vertebral levels and by limiting measurement to one plane, valuable data is missed regarding the three-dimensional (3D) effects of growth modulation. This information might be interesting when it comes to final fusion or, even more so, when the protective growing implants are removed and the spine re-exposed to physiologic forces at the end of growth. METHODS The goal of this retrospective radiographic study was to assess the growth modulating impact of year-long, distraction-based VEPTR treatment on the morphology of single vertebral bodies. We digitally measured lumbar vertebral body height (VBH) and upper endplate depth (VBD) at the time of the index procedure and at follow-up in nine patients with rib-to-ileum constructs (G1) spanning an anatomically normal lumbar spine. Nine patients with congenital thoracic scoliosis and VEPTR rib-to-rib constructs, but uninstrumented lumbar spines, served as controls (G2). All had undergone more than eight half-yearly VEPTR expansions. A Wilcoxon signed-rank test was used for statistical comparison of initial and follow-up VBH, VBD and height/depth (H/D) ratio (significance level 0.05). RESULTS The average age was 7.1 years (G1) and 5.2 year (G2, p > 0.05) at initial surgery; the average overall follow-up time was 5.5 years (p = 1). In both groups, VBH increased significantly without a significant intergroup difference. Group 1 did not show significant growth in depth, whereas VBD increased significantly in the control group. As a consequence, the H/D ratio increased significantly in group 1 whereas it remained unchanged in group 2. The growth rate for height in mm/year was 1.4 (group 1) and 1.1 (group 2, p = 0.45), and for depth, it was -0.3 and 1.1 (p < 0.05), respectively. CONCLUSIONS VEPTR growth modulating treatment alters the geometry of vertebral bodies by increasing the H/D ratio. We hypothesize that the implant-related deprivation from axial loads (stress-shielding) impairs anteroposterior growth. The biomechanical consequence of such slender vertebrae when exposed to unprotected loads in case of definitive VEPTR removal at the end of growth is uncertain.

Involuntary reflexive pelvic floor muscle training in addition to standard training versus standard training alone for women with stress urinary incontinence: study protocol for a randomized controlled trial

BACKGROUND Pelvic floor muscle training is effective and recommended as first-line therapy for female patients with stress urinary incontinence. However, standard pelvic floor physiotherapy concentrates on voluntary contractions even though the situations provoking stress urinary incontinence (for example, sneezing, coughing, running) require involuntary fast reflexive pelvic floor muscle contractions. Training procedures for involuntary reflexive muscle contractions are widely implemented in rehabilitation and sports but not yet in pelvic floor rehabilitation. Therefore, the research group developed a training protocol including standard physiotherapy and in addition focused on involuntary reflexive pelvic floor muscle contractions. METHODS/DESIGN The aim of the planned study is to compare this newly developed physiotherapy program (experimental group) and the standard physiotherapy program (control group) regarding their effect on stress urinary incontinence. The working hypothesis is that the experimental group focusing on involuntary reflexive muscle contractions will have a higher improvement of continence measured by the International Consultation on Incontinence Modular Questionnaire Urinary Incontinence (short form), and - regarding secondary and tertiary outcomes - higher pelvic floor muscle activity during stress urinary incontinence provoking activities, better pad-test results, higher quality of life scores (International Consultation on Incontinence Modular Questionnaire) and higher intravaginal muscle strength (digitally tested) from before to after the intervention phase. This study is designed as a prospective, triple-blinded (participant, investigator, outcome assessor), randomized controlled trial with two physiotherapy intervention groups with a 6-month follow-up including 48 stress urinary incontinent women per group. For both groups the intervention will last 16 weeks and will include 9 personal physiotherapy consultations and 78 short home training sessions (weeks 1-5 3x/week, 3x/day; weeks 6-16 3x/week, 1x/day). Thereafter both groups will continue with home training sessions (3x/week, 1x/day) until the 6-month follow-up. To compare the primary outcome, International Consultation on Incontinence Modular Questionnaire (short form) between and within the two groups at ten time points (before intervention, physiotherapy sessions 2-9, after intervention) ANOVA models for longitudinal data will be applied. DISCUSSION This study closes a gap, as involuntary reflexive pelvic floor muscle training has not yet been included in stress urinary incontinence physiotherapy, and if shown successful could be implemented in clinical practice immediately. TRIAL REGISTRATION NCT02318251 ; 4 December 2014 First patient randomized: 11 March 2015.

C9ORF72 Regulates Stress Granule Formation and Its Deficiency Impairs Stress Granule Assembly, Hypersensitizing Cells to Stress

Hexanucleotide repeat expansions in the C9ORF72 gene are causally associated with frontotemporal lobar dementia (FTLD) and/or amyotrophic lateral sclerosis (ALS). The physiological function of the normal C9ORF72 protein remains unclear. In this study, we characterized the subcellular localization of C9ORF72 to processing bodies (P-bodies) and its recruitment to stress granules (SGs) upon stress-related stimuli. Gain of function and loss of function experiments revealed that the long isoform of C9ORF72 protein regulates SG assembly. CRISPR/Cas9-mediated knockdown of C9ORF72 completely abolished SG formation, negatively impacted the expression of SG-associated proteins such as TIA-1 and HuR, and accelerated cell death. Loss of C9ORF72 expression further compromised cellular recovery responses after the removal of stress. Additionally, mimicking the pathogenic condition via the expression of hexanucleotide expansion upstream of C9ORF72 impaired the expression of the C9ORF72 protein, caused an abnormal accumulation of RNA foci, and led to the spontaneous formation of SGs. Our study identifies a novel function for normal C9ORF72 in SG assembly and sheds light into how the mutant expansions might impair SG formation and cellular-stress-related adaptive responses.

Rapid divergence in physiological and life-history traits between northern and southern populations of the British introduced neo-species, Senecio squalidus

Alien plants provide a unique opportunity to study evolution in novel environments, but relatively little is known about the extent to which they become locally adapted to different environments across their new range. Here, we compare northern and southern populations of the introduced species Senecio squalidus in Britain; S. squalidus has been in southern Britain for approximately 200 years and reached Scotland only about 50 years ago. We conducted common garden experiments at sites in the north and south of the species’ range in Britain. We also conducted glasshouse and growth chamber experiments to test the hypothesis that southern genotypes flower later, are more drought-tolerant, germinate and establish better at warmer temperatures, and are less sensitive to cold stress than their more northern counterparts. Results from the common garden experiments are largely consistent with the hypothesis of rapid adaptive divergence of populations of the species within the introduced range, with genotypes typically showing a home-site advantage. Results from the glasshouse and growth chamber experiments demonstrate adaptive divergence in ability to tolerate drought stress and high temperatures, as well as in phenology. In particular, southern genotypes were more tolerant of dry conditions and high temperatures and they flowered later than northern genotypes. Our results show that rapid local adaptation can occur in alien species, and they have implications for our understanding of the ecological genetics of range expansion of introduced weeds.

Baseline quality of life as a predictor of exercise intervention adherence among endometrial cancer survivors

Background: The objective of this analysis is to test whether baseline quality of life (QOL) measurements, body mass index (BMI) and prior exercise behavior are significantly associated with (1) telephone counseling adherence, and (2) activity at the final assessment, in a physical activity promoting intervention among endometrial cancer survivors.^ Methods: One hundred endometrial cancer survivors not currently meeting physical activity guidelines completed baseline QOL and anthropometric assessments to measure general physical and mental health [Medical Outcomes Survey (SF-36)], sleep patterns and sleep quality [Pittsburgh Sleep Quality Index (PSQI)], perceived stress [Perceived Stress Scale (PSS)], cancer-specific concerns of long-term survivors [Quality of Life in Adult Cancer Survivors (QLACS)], and psychological distress [Brief Symptom Inventory-18 (BSI-18)]. Survivors were counseled by telephone during the 6-month intervention and their completion rate determined their adherence. The primary variables of interest included age, baseline BMI, baseline activity level, time since diagnosis, education, treatment received, and the SF-36 physical and mental component scores.^ Results: Final activity was most closely linked with baseline activity (p<.001) and less invasive surgery, being leaner and older, and experiencing less pain and more vitality. Telephone counseling was also predicted well by baseline activity, working less and having better overall cancer-related functioning.^ Conclusion: Above and beyond the QOL measures, baseline activity was the strongest predictor of both final activity and telephone counseling adherence. While education, surgery treatment type and bodily pain were important predictors for final exercise and employment status and cancer-related quality of life were important predictors for telephone counseling adherence, considering adaptive exercise interventions that focus heavily on engaging inactive participants may be a way to produce better exercise-related outcomes in the endometrial cancer survivor population.^

Warming and acidification experiment on early life-stage F. vesiculosus under natural fluctuation and seasonal variations (spring 2013 - 2014)

Genetic diversity of baltic F. vesiculosus is low compared to other populations which might jeopardize their potential for adaptation to climate change. Especially the early life-stage F. vesiculosus may be threaten by ocean warming and acidification. To test this, we exposed F. vesiculosus germlings to warming and acidification in the near-natural scenario in the "Kiel Outdoor Benthocosms" maintaining the natural variation of the Kiel Fjord, Germany (54°27 'N, 10°11 'W) in all seasons (spring 2013 - 2014). Warming was simulated by using a delta treatment adding 5 °C and by increasing pCO2 at 1000 µatm. Warming positively affected germlings' growth in spring and in summer but decreased non-photochemical quenching in spring and survival in summer. Acidified conditions showed much weaker effects than warming. The high genotypic variation in stress sensitivity as well as the enhanced survival at high diversity levels indicate higher potential for adaptation for genetically diverse populations. We conclude that the combination of stressors and season determines the sensitivity to environmental stress and that genetic variation is crucial for the adaptation to climate change stress.

Instrumentación de referencia para realización automática de ensayos de fiabilidad

En todo proceso de desarrollo de un dispositivo electrónico o equipo cabe la necesidad de evaluar la fiabilidad de sus componentes, es decir, cual es el porcentaje de equipos que tras un determinado periodo de vida mantiene todas sus funcionalidades dentro de especificaciones. La evaluación de la fiabilidad mediante ensayos acelerados es la herramienta que permite una estimación de la vida del dispositivo o equipo de forma previa a su comercialización. La cuantificación de la fiabilidad es crítica para identificar los costos de un determinado periodo de garantía, y para ofrecer a los clientes el nivel de calidad deseado. El objetivo de este Proyecto Fin de Carrera, es el diseño de un sistema automático de instrumentación versátil, para la realización y caracterización de ensayos acelerados, el cual nos sirva para abordar una amplia gama de ensayos con los que evaluar la fiabilidad de los dispositivos electrónicos o equipos. Además del uso industrial donde se evaluará la fiabilidad de forma previa a la comercialización, este sistema se podrá emplear en la docencia de esta área, y fundamentalmente para la realización de ensayos acelerados en investigación de dispositivos electrónicos. La versatilidad de nuestro hardware y aplicación software es un punto a favor, ya que con este sistema de instrumentación se pueden realizar numerosos tipos de ensayos acelerados, sin el problema de tener que cambiar toda la instrumentación, cada vez que se quiera realizar otro ensayo distinto. Los componentes que se elijan para realizar el ensayo acelerado, serán sometidos a un estrés (tensión, corriente, humedad, temperatura…) y se podrá ir observando cómo envejecen, lo que nos permite evaluar la vida del dispositivo en un corto periodo, emulando sus condiciones de trabajo, además de estudiar la fiabilidad también se puede identificar como se degradan sus características principales antes del fallo. El Software utilizado en este Proyecto se ha implementado con un lenguaje de programación gráfico para instrumentación, LabVIEW. La aplicación software se explica de manera muy detallada a lo largo de la memoria, para que su uso y adaptación si fuese necesario no suponga ningún problema para el usuario. En la última parte de esta memoria se encuentra la guía de usuario y un ensayo acelerado planteado como ejemplo. Explicaremos como se han interconectado los equipos a los componentes en los que se va a realizar el ensayo y así se comprobará el correcto funcionamiento del software tomando las medidas necesarias. ABTRACT In all process of development of an electronic device or equipment, we have the need to evaluate the reliability of its components, that is to say, what percentage of equipment that after a certain period of life keeps all of its functionalities within specifications. The evaluation of reliability by means of accelerated tests is the tool that allows an estimation of the lifetime of the device or equipment prior to its marketing. The quantification of reliability is critical to identify the costs of a specific warranty period, and to offer customers the desired quality level. The objective of this Thesis is the design of an automatic very versatile instrument for the realization and characterization of accelerated tests, which will help us to address a wide range of tests to assess the reliability of the devices or electronic equipment. In addition to industrial use where test the reliability before its commercialization, use it can be used in teaching of this area, fundamentally for the realization of accelerated testing in the investigation of electronic devices. The versatility of our hardware and software implementation is a plus, given that this instrumentation system can perform numerous types of accelerated tests, without the problem to have to change everything, every time you want to make another different test. The components that will be chosen to perform the accelerated test, will be subjected to stress (voltage, current, humidity, temperature ...) and you can observe how they age, allowing us to evaluate the life of the device in a short period, emulating their working conditions. In addition to studying the reliability it can also identify how its main characteristics are degraded before failure. The software used in this Thesis has been implemented with a graphical programming language for instrumentation, LabVIEW. This software is explained in great detail throughout the Thesis, so that its use and adaptation, if necessary, will not be a problem for the user. In the last part of this memory we will expose a user guide and test that we have done. We will explain how the equipment has been interconnected to the components in which we are going to perform the test and so we will check the correct operation of the software taking the necessary measures.

Análisis de micromovilidad en vástagos femorales mediante ensayo dinámico de oscilaciones libres

La artroplastia de cadera se considera uno de los mayores avances quirúrgicos de la Medicina. La aplicación de esta técnica de Traumatología se ha incrementado notablemente en los últimos anos, a causa principalmente del progresivo incremento de la esperanza de vida. En efecto, con la edad aumentan los problemas de artrosis y osteoporosis, enfermedades típicas de las articulaciones y de los huesos que requieren en muchos casos la sustitución protésica total o parcial de la articulación. El buen comportamiento funcional de una prótesis depende en gran medida de la estabilidad primaria, es decir, el correcto anclaje de la prótesis en el momento de su implantación. Las prótesis no cementadas basan su éxito a largo plazo en la osteointegración que tiene lugar entre el material protésico y el tejido óseo, y para lograrla es imprescindible conseguir unas buenas condiciones de estabilidad primaria. El aflojamiento aséptico es la principal causa de fallo de artroplastia total de cadera. Este es un fenómeno en el que, debido a complejas interacciones de factores mecánicos y biológicos, se producen movimientos relativos que comprometen la funcionalidad del implante. La minimización de los correspondientes danos depende en gran medida de la detección precoz del aflojamiento. Para lograr la detección temprana del aflojamiento aséptico del vástago femoral se han ensayado diferentes técnicas, tanto in vivo como in vitro: análisis numéricos y técnicas experimentales basadas en sensores de movimientos provocados por cargas transmitidas natural o artificialmente, tales como impactos o vibraciones de distintas frecuencias. Los montajes y procedimientos aplicados son heterogéneos y, en muchas ocasiones, complejos y costosos, no existiendo acuerdo sobre una técnica simple y eficaz de aplicación general. Asimismo, en la normativa vigente que regula las condiciones que debe cumplir una prótesis previamente a su comercialización, no hay ningún apartado referido específicamente a la evaluación de la bondad del diseño del vástago femoral con respecto a la estabilidad primaria. El objetivo de esta tesis es desarrollar una metodología para el análisis, in vitro, de la estabilidad de un vástago femoral implantado, a fin de poder evaluar las técnicas de implantación y los diferentes diseños de prótesis previamente a su oferta en el mercado. Además se plantea como requisito fundamental que el método desarrollado sea sencillo, reversible, repetible, no destructivo, con control riguroso de parámetros (condiciones de contorno de cargas y desplazamientos) y con un sistema de registro e interpretación de resultados rápido, fiable y asequible. Como paso previo, se ha realizado un análisis cualitativo del problema de contacto en la interfaz hueso-vástago aplicando una técnica optomecánica del campo continuo (fotoelasticidad). Para ello se han fabricado tres modelos en 2D del conjunto hueso-vástago, simulando tres tipos de contactos en la interfaz: contacto sin adherencia y con holgura, contacto sin adherencia y sin holgura, y contacto con adherencia y homogéneo. Aplicando la misma carga a cada modelo, y empleando la técnica de congelación de tensiones, se han visualizado los correspondientes estados tensionales, siendo estos más severos en el modelo de unión sin adherencia, como cabía esperar. En todo caso, los resultados son ilustrativos de la complejidad del problema de contacto y confirman la conveniencia y necesidad de la vía experimental para el estudio del problema. Seguidamente se ha planteado un ensayo dinámico de oscilaciones libres con instrumentación de sensores resistivos tipo galga extensométrica. Las muestras de ensayo han sido huesos fémur en todas sus posibles variantes: modelos simplificados, hueso sintético normalizado y hueso de cadáver, seco y fresco. Se ha diseñado un sistema de empotramiento del extremo distal de la muestra (fémur) con control riguroso de las condiciones de anclaje. La oscilación libre de la muestra se ha obtenido mediante la liberación instantánea de una carga estética determinada y aplicada previamente, bien con una maquina de ensayo o bien por gravedad. Cada muestra se ha instrumentado con galgas extensométricas convencionales cuya señal se ha registrado con un equipo dinámico comercial. Se ha aplicado un procedimiento de tratamiento de señal para acotar, filtrar y presentar las respuestas de los sensores en el dominio del tiempo y de la frecuencia. La interpretación de resultados es de tipo comparativo: se aplica el ensayo a una muestra de fémur Intacto que se toma de referencia, y a continuación se repite el ensayo sobre la misma muestra con una prótesis implantada; la comparación de resultados permite establecer conclusiones inmediatas sobre los efectos de la implantación de la prótesis. La implantación ha sido realizada por un cirujano traumatólogo utilizando las mismas técnicas e instrumental empleadas en el quirófano durante la práctica clínica real, y se ha trabajado con tres vástagos femorales comerciales. Con los resultados en el dominio del tiempo y de la frecuencia de las distintas aplicaciones se han establecido conclusiones sobre los siguientes aspectos: Viabilidad de los distintos tipos de muestras sintéticas: modelos simplificados y fémur sintético normalizado. Repetibilidad, linealidad y reversibilidad del ensayo. Congruencia de resultados con los valores teóricos deducidos de la teoría de oscilaciones libres de barras. Efectos de la implantación de tallos femorales en la amplitud de las oscilaciones, amortiguamiento y frecuencias de oscilación. Detección de armónicos asociados a la micromovilidad. La metodología se ha demostrado apta para ser incorporada a la normativa de prótesis, es de aplicación universal y abre vías para el análisis de la detección y caracterización de la micromovilidad de una prótesis frente a las cargas de servicio. ABSTRACT Total hip arthroplasty is considered as one of the greatest surgical advances in medicine. The application of this technique on Traumatology has increased significantly in recent years, mainly due to the progressive increase in life expectancy. In fact, advanced age increases osteoarthritis and osteoporosis problems, which are typical diseases of joints and bones, and in many cases require full or partial prosthetic replacement on the joint. Right functional behavior of prosthesis is highly dependent on the primary stability; this means it depends on the correct anchoring of the prosthesis at the time of implantation. Uncemented prosthesis base their long-term success on the quality of osseointegration that takes place between the prosthetic material and bone tissue, and to achieve this good primary stability conditions is mandatory. Aseptic loosening is the main cause of failure in total hip arthroplasty. This is a phenomenon in which relative movements occur, due to complex interactions of mechanical and biological factors, and these micromovements put the implant functionality at risk. To minimize possible damage, it greatly depends on the early detection of loosening. For this purpose, various techniques have been tested both in vivo and in vitro: numerical analysis and experimental techniques based on sensors for movements caused by naturally or artificially transmitted loads, such as impacts or vibrations at different frequencies. The assemblies and methods applied are heterogeneous and, in many cases, they are complex and expensive, with no agreement on the use of a simple and effective technique for general purposes. Likewise, in current regulations for governing the conditions to be fulfilled by the prosthesis before going to market, there is no specific section related to the evaluation of the femoral stem design in relation to primary stability. The aim of this thesis is to develop a in vitro methodology for analyzing the stability of an implanted femoral stem, in order to assess the implantation techniques and the different prosthesis designs prior to its offer in the market. We also propose as a fundamental requirement that the developed testing method should be simple, reversible, repeatable, non-destructive, with close monitoring of parameters (boundary conditions of loads and displacements) and with the availability of a register system to record and interpret results in a fast, reliable and affordable manner. As a preliminary step, we have performed a qualitative analysis of the contact problems in the bone-stem interface, through the application of a continuous field optomechanical technique (photoelasticity). For this proposal three 2D models of bone–stem set, has been built simulating three interface contact types: loosened an unbounded contact, unbounded and fixed contact, and bounded homogeneous contact. By means of applying the same load to each model, and using the stress freezing technique, it has displayed the corresponding stress states, being more severe as expected, in the unbounded union model. In any case, the results clearly show the complexity of the interface contact problem, and they confirm the need for experimental studies about this problem. Afterward a free oscillation dynamic test has been done using resistive strain gauge sensors. Test samples have been femur bones in all possible variants: simplified models, standardized synthetic bone, and dry and cool cadaveric bones. An embedding system at the distal end of the sample with strong control of the anchoring conditions has been designed. The free oscillation of the sample has been obtained by the instantaneous release of a static load, which was previously determined and applied to the sample through a testing machine or using the gravity force. Each sample was equipped with conventional strain gauges whose signal is registered with a marketed dynamic equipment. Then, it has applied a signal processing procedure to delimit, filter and present the time and frequency response signals from the sensors. Results are interpreted by comparing different trials: the test is applied to an intact femur sample which is taken as a reference, and then this test is repeated over the same sample with an implanted prosthesis. From comparison between results, immediate conclusions about the effects of the implantation of the prosthesis can be obtained. It must be said that the implementation has been made by an expert orthopedic surgeon using the same techniques and instruments as those used in clinical surgery. He has worked with three commercial femoral stems. From the results obtained in the time and frequency domains for the different applications the following conclusions have been established: Feasibility of the different types of synthetic samples: simplified models and standardized synthetic femur. Repeatability, linearity and reversibility of the testing method. Consistency of results with theoretical values deduced from the bars free oscillations theory. Effects of introduction of femoral stems in the amplitude, damping and frequencies of oscillations Detection of micromobility associated harmonics. This methodology has been proved suitable to be included in the standardization process of arthroplasty prosthesis, it is universally applicable and it allows establishing new methods for the analysis, detection and characterization of prosthesis micromobility due to functional loads.