DC-DC Power Converters Featuring Wide-Bandgap Devices

This work focuses on the design of high-efficient DC-DC converters based on WBG power devices. The first objective is the development of an isolated bidirectional converter for the distribution network of future electrical aircrafts. A SiC-based Dual Active Bridge converter is designed and fabricated. Control strategies for individual and parallel operations are investigated and implemented into a FPGA platform. Experimental results on 1.2kW 270V/28V prototype are presented to confirm the proper behavior of the proposed solution. The second project belongs to the field of photovoltaic systems and aims to develop a three-port converter with multiple power elements interfacing capability. A GaN-based Triple Active Bridge has been designed, regarding both the controller and the hardware realization.

COMUNICAÇÃO PARA OS PEQUENOS NEGÓCIOS: PROPOSTA DE MODELO DE APLICAÇÃO PRÁTICA PARA POSICIONAMENTO EM MÍDIAS E REDES SOCIAIS DIGITAIS

A comunicação via mídias e redes sociais digitais é uma atividade estratégica de suporte para a consecução dos objetivos dos pequenos negócios que, em face de uma realidade de restrição de recursos financeiros, estrutura administrativa reduzida e necessidade de obter resultados no curtíssimo prazo, encontram nas ferramentas da internet alternativas viáveis para o posicionamento e a diferenciação de seus negócios. Os objetivos desta tese envolvem tanto a compreensão da importância da comunicação organizacional para os pequenos negócios quanto à identificação das particularidades dos pequenos negócios, o desenvolvimento de um instrumento para orientar a atuação estratégica dos pequenos negócios nas mídias e redes sociais digitais e a análise da colaboração deste instrumento para as atividades empresariais dos empreendedores individuais, das microempresas e das pequenas empresas. Realizaram-se, primeiramente, estudos bibliográfico e documental com vistas à fundamentação teórica da pesquisa e à compreensão dos pequenos negócios e dos aspectos contemporâneos acerca da comunicação institucional. Sucedeu-se o trabalho de desenvolvimento do Modelo de Aplicação Prática para Posicionamento em Mídias e Redes Sociais Digitais e, posteriormente, uma pesquisa qualitativa, compreendida por duas etapas: a) aplicação do modelo proposto a três empresas; e b) avaliação do modelo. Os resultados da pesquisa mostram que, a despeito de o Modelo de Aplicação Prática para Posicionamento em Mídias e Redes Sociais Digitais contribuir estrategicamente para o posicionamento dos pequenos negócios, de maneira geral, a comunicação nesse tipo de empreendimento não surte melhor efeito porque esbarra nas limitações próprias desse tipo de empresa.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS SÃO BERNARDO DO CAMPO

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital

Broader or deeper? Exploring the most effective intervention profile for public small business support

Most advanced economies offer publicly financed advice services to start-up firms and SMEs. In England, local or regional Business Links organisations have provided these services, and divided their support into nonintensive one-off contacts providing information or advice and more intensive support involving a diagnostic process and repeated interaction with firms. A key choice for Business Link managers is how to shape their intervention strategies, balancing resources between intensive and nonintensive support. Drawing on resource dependency theory, we develop a typology of intervention strategies for Business Links in England which reflects differences in the breadth and depth of the support provided. We then test the impacts of these alternative intervention models on client companies using both subjective assessments by firms and econometric treatment models that allow for selection bias. Our key empirical result is that Business Links’ choice of intervention strategy has a significant effect both on actual and on perceived business outcomes, with our results emphasising the value of depth over breadth. The implication is that where additional resources are available for business support these should be used to deepen the assistance provided rather than extend assistance to a wider group of firms.

Estimating additionality and leverage:between public and private sector equity finance in Ireland (2000 – 2002)

This paper aims to contribute to the debate about the role of the public sector in stimulating greater use of private sector equity for business start-up and growth in two ways. First, to examine the extent to which the provision of public sector equity finance enables individual firms to raise additional funds in the private sector market place. Second, to consider the methodological implications for an economic impact assessment of industrial policy interventions (especially those which include an equity component) at the level of the individual firm. We assess the extent to which there may be indirect positive effects (externalities) associated with public sector financial assistance to individual firms and if so how they distort standard evaluation methodologies designed to estimate the level of additionality of that support. The paper draws upon the results of a recent study of the impact of Enterprise Ireland (EI) financial assistance to indigenous Irish industry in the period 2000 to 2002. The paper demonstrates that a process of re-calibration is necessary in estimates of economic impact in order to account for these positive externalities and the result in this study was a ‘boost’ to additionality. In operational and conceptual terms, the study underlines the importance of the relationship between private and public sector sources of equity finance as an important dynamic in the attempt by industrial and regional policy to stimulate the number of firms with viable investment proposals accessing external equity finance.

The political economy of industry dynamics in China:a microeconomic investigation

Using a unique firm level data, this paper analyses the role of political connections in the post-entry performance of private start-up companies in China. It documents robust evidence that political affiliation enhances firms’ survival and growth prospects. But interestingly politically neutral start-ups enjoy faster productivity improvements conditional on survival.. We conclude that the close association between the state and a segment of the business community is leading to sub-optimal resource allocation in the economy by interfering with the process of market selection.

Evaluating the motives of informal entrepreneurs: some lessons from Ukraine

To understand entrepreneurs' motivations, it has become increasingly common to distinguish between those driven by necessity (or pushed) and those driven by opportunity (or pulled) into entrepreneurship. Until now, entrepreneurs operating wholly or partially in the informal economy have been widely assumed to be necessity-driven, pushed into this enterprise as a survival strategy in the absence of alternatives. To evaluate whether this is indeed the case, this paper reports one of the first surveys of informal entrepreneurs' motives. Reporting face-to-face interviews conducted in Ukraine during 2005–06 with 298 informal entrepreneurs, the finding is although most identified themselves as necessity entrepreneurs when initially asked whether they were either pushed or pulled, subsequent questions reveal in the vast majority of cases, there were not only both push and pull factors driving their original decision to start-up informal enterprises, but also a clear shift among these entrepreneurs as their business became established away from necessity-oriented motivations and toward more opportunity-oriented motivations. The outcome is a call for a transcendence of a static either/or approach and the adoption of a dynamic both/and approach that recognizes the coexistence of necessity- and opportunity-drivers as well as the fluidity of entrepreneurs' motivations.

Entrepreneurship and the informal economy: a study of Ukraine's hidden enterprise culture

How many entrepreneurs start-up their business ventures conducting some or all of their trade in the informal economy? The aim of this paper is to answer this key question that has been seldom addressed using data from 600 face-to-face structured interviews conducted in Ukraine in late 2005 and early 2006. Analyzing the 331 entrepreneurs identified (i.e., individuals starting-up an enterprise in the past three years), just 10 percent operate on a wholly legitimate basis, while 39 percent have a license to trade and/or have registered their business but conduct a portion of their trade in the informal economy, and 51 percent operate unregistered enterprises and conduct all of their trade on an off-the-books basis. Given that some 90 percent of all business start-ups operate partially or wholly in the informal economy, and that 40 percent of all respondents depend on the informal economy as either their principal or secondary contributor to their livelihoods, the paper concludes by considering the wider implications of these findings both for further research and public policy.

The acceptability of alcohol fuels for automobile engines

The aim of this project was to carry out an investigastion into suitable alternatives to gasoline for use in modern automobiles. The fuel would provide the western world with a means of extending the natural gasoline resources and the third world a way of cutting down their dependence on the oil producing countries for their energy supply. Alcohols, namely methanol and ethanol, provide this solution. They can be used as gasoline extenders or as fuels on their own.In order to fulfil the aims of the project a literature study was carried out to investigate methods and costs of producing these fuels. An experimental programme was then set up in which the performance of the alcohols was studied on a conventional engine. The engine used for this purpose was the Fiat 127 930cc four cylinder engine. This engine was used because of its popularity in the European countries. The Weber fixed jet carburettor, since it was designed to be used with gasoline, was adapted so that the alcohol fuels and the blends could be used in the most efficient way. This was mainly to take account of the lower heat content of the alcohols. The adaptation of the carburettor was in the form of enlarging the main metering jet. Allowances for the alcohol's lower specfic gravity were made during fuel metering.Owing to the low front end volatility of methanol and ethanol, it was expected that `start up' problems would occur. An experimental programme was set up to determine the temperature range for a minimum required percentage `take off' that would ease start-up since it was determined that a `take off' of about 5% v/v liquid in the vapour phase would be sufficient for starting. Additions such as iso-pentane and n-pentane were used to improve the front end volatility. This proved to be successful.The lower heat content of the alcohol fuels also meant that a greater charge of fuel would be required. This was seen to pose further problems with fuel distribution from the carburettor to the individual cylinders on a multicylinder engine. Since it was not possible to modify the existing manifold on the Fiat 127 engine, experimental tests on manifold geometry were carried out using the Ricardo E6 single cylinder variable compression engine. Results from these tests showed that the length, shape and cross-sectional area of the manifold play an important part in the distribution of the fuel entering the cylinder, ie. vapour phase, vapour/small liquid droplet/liquid film phase, vapour/large liquid droplet/liquid film phase etc.The solvent properties of the alcohols and their greater electrical conductivity suggested that the materials used on the engine would be prone to chemical attack. In order to determine the type and rate of chemical attack, an experimental programme was set up whereby carburettor and other components were immersed in the alcohols and in blends of alcohol with gasoline. The test fuels were aerated and in some instances kept at temperatures ranging from 50oC to 90oC. Results from these tests suggest that not all materials used in the conventional engine are equally suitable for use with alcohols and alcohol/gasoline blends. Aluminium for instance was severely attacked by methanol causing pitting and pin-holing in the surface.In general this whole experimental programme gave valuable information on the acceptability of substitute fuels. While the long term effects of alcohol use merit further study, it is clear that methanol and ethanol will be increasingly used in place of gasoline.

Marketing in indigenous and Asian small firms in the West Midlands.

This study is concerned with examining the application of marketing during the start-up, development and growth of small firms in the West Midlands. As an exploratory study, it provides evidence to support the central hypothesis of the thesis that whilst many small firms have the potential to progress through to the successful growth stage of development, they fail to do so because of their owner-managers' orientation towards production and selling and because they do not apply formal marketing during the initial stages of business development. A comparative approach to studying marketing in indigenous and Asian firms is adopted in an attempt to fill a gap in the literature on the characteristics and differences in the formation and development processes of these two groups of enterprises. The study has three main objectives and is based on qualitative research techniques of in-depth interviews, case studies and longitudinal studies among sixty-six firms representing the key activities of the small firms sector of the local economy. Firstly, it investigates owner-managers' orientation in developing and managing new and established businesses and explores the sources of, and changes in their orientation during the various stages of development. Secondly, it assesses the owner-manager's awareness and understanding of what constitutes the marketing function and investigates what aspects of marketing are applied during the different stages of business development. Finally, the study monitors and evaluates the outcomes and implications of applying formal marketing techniques in a small sample of firms over a period of two years. The thesis concludes by using the findings of the study to contribute additions to existing models of growth and by proposing new models of evolution and application of marketing in small firms.

An assessment of factors affecting performance and growth of new technology based firms in the UK

New Technology Based Firms (NTBF) are considered to be important for the economic development of a country in regards to both employment growth and innovative activity. The latter is believed to contribute significantly to the increase in productivity and therefore the competitiveness of UK’s economy. This study contributes to the above literature by investigating two of the factors believed to limit the growth of such firms in the UK. The first concerns the existence of a ‘knowledge gap’ while the second the existence of a ‘financial gap’. These themes are developed along three main research lines. Firstly, based upon the human capital theory initially proposed by Backer (1964) new evidence is provided on the human capital characteristics (experience and education) of the current UK NTBF entrepreneurs. Secondly, the causal relationship between general and specific human capital (as well as their interactions) upon the company performance and growth is investigated via its traditional direct effect as well as via its indirect effect upon the access to external finance. Finally, more light is shed on the financial structure and the type of financial constraints that high-tech firms face at start-up. In particular, whether a financial gap exists is explored by distinguishing between the demand and the supply of external finance as well as by type of external source of financing. The empirical testing of the various research hypotheses has been obtained by carrying out an original survey of new technology based firms defined as independent companies, established in the past 25 years in R&D intensive sectors. The resulting dataset contains information for 412 companies on a number of general company characteristics and the characteristics of their entrepreneurs in 2004. Policy and practical implications for future and current entrepreneurs and also providers of external finance are provided.

Advances towards a pressurised rotating fluidised bed combustor

Rotating fluidised Beds offer the potential for high intensity combustion, large turndown and extended range of fluidising velocity due to the imposition of an artificial gravitational field. Low thermal capacity should also allow rapid response to load changes. This thesis describes investigations of the validity of these potential virtues. Experiments, at atmospheric pressure, were conducted in flow visualisation rigs and a combustor designed to accommodate a distributor 200mm diameter and 80mm axial length. Ancillary experiments were conducted in a 6" diameter conventional fluidised bed. The investigations encompassed assessment of; fluidisation and elutriation, coal feed requirements, start-up and steady-state combustion using premixed propane and air, transition from propane to coal combustion and mechanical design. Assessments were made of an elutriation model and some effects of particle size on the combustion of premixed fuel gas and air. The findings were: a) more reliable start-up and control methods must be developed. Combustion of premixed propane and air led to severe mechanical and operating problems. Manual control of coal combustion was inadequate. b) Design criteria must encompass pressure loss, mechanical strength and high temperature resistance. The flow characteristics of ancillaries and the distributor must be matcheo. c) Fluidisation of a range of particle sizes was investigated. New correlations for minimum fluidisation and fully supported velocities are proposed. Some effects on elutriation of particle size and the distance between the bed surface and exhaust port have been identified. A conic distributor did not aid initial bed distribution. Furthermore, airflow instability was encountered with this distributor shape. Future use of conic distributors is not recommended. Axial solids mixing was found to be poor. A coal feeder was developed which produced uniform fuel distribution throughout the bed. The report concludes that small scale inhibits development of mechanical design and exploration of performance. future research requires larger combustors and automatic control.

The new generation: characteristics and motivations of BME graduate eEntrepreneurs

The purpose of this research is to profile the characteristics and entrepreneurial motivations of graduate entrepreneurs from black and minority ethnic (BME) communities. The authors found that: BME graduate entrepreneurs were diverse in terms of their characteristics: size, gender, ethnicity and when they started the business. Almost all interviewees had worked for someone before they started their business. The two most compelling motivations for start up were 'being your own boss', especially for Indians and Bangladeshis; and making more money (31%), in particular for African Caribbeans. Over half of interviewees started a business in a sector in which they had prior experience, knowledge or skills. Two thirds of interviewees obtained advice from family and friends, while just over a third had completed any kind of training or course. This study has provided an insight into characteristics and entrepreneurial motivations of BME graduate entrepreneurs. Though the results of this study are indicative, there is a compelling case for further research into this relatively unexplored group.

Black and minority ethnic graduate entrepreneurs: motivations, characteristics and access to finance

This paper draws upon four case studies to examine characteristics, entrepreneurial motivations and access to finance of black and minority ethnic (BME) graduates in the UK. We find that BME graduates starting a business are motivated by a desire to “do better”, and rely heavily on personal savings and family sources for start-up capital. In addition: • There is no conclusive evidence that suggests in this study that BME graduates entered entrepreneurship because of unemployment; with the exception of a few, all had jobs prior to entering self employment. • “Glass ceilings” were often cited by participants of the case studies as a kind of barrier, but there was reluctance to specify exactly what that meant. • Also, lack of satisfaction from working for others is considered to be a strong motivator for entering self-employment but other reasons, to be one’s own boss and the prospect of higher earnings, are also strong motivators. There is, therefore, a need for support agencies and universities to recognise the distinctive nature of BME graduate enterprise in order to provide effective solutions for different groups. This might include a) work experience, b) advice on an adequate capital structure at start up, c) adequate funding and training, and d) appropriate training for all graduates in basic business education.

Red capitalists:political connections and firm performance in China

Using a unique firm level data, this paper analyses the role of political connections in the post-entry performance of private start-up companies in China. It documents robust evidence that political affiliation enhances firms' survival and growth prospects. But interestingly politically neutral start-ups enjoy faster productivity improvements conditional on survival. In addition, the benefits of political connections are largely confined to firms associated with local or top level governments, and they are more pronounced in capital-intensive industries. We conclude that the close association between the state and a segment of the business community is leading to sub-optimal resource allocation in the economy by interfering with the process of market selection.