Atletismo na educação física escolar: a elaboração colaborativa do software Atletic

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento de ontologias empresariais para modelos de processos de negócio em BPMN, com aplicação em processos de software

Pós-graduação em Ciência da Computação - IBILCE

An Active Learning Module for an Introduction to Software Engineering Course

Many schools do not begin to introduce college students to software engineering until they have had at least one semester of programming. Since software engineering is a large, complex, and abstract subject it is difficult to construct active learning exercises that build on the students’ elementary knowledge of programming and still teach basic software engineering principles. It is also the case that beginning students typically know how to construct small programs, but they have little experience with the techniques necessary to produce reliable and long-term maintainable modules. I have addressed these two concerns by defining a local standard (Montana Tech Method (MTM) Software Development Standard for Small Modules Template) that step-by-step directs students toward the construction of highly reliable small modules using well known, best-practices software engineering techniques. “Small module” is here defined as a coherent development task that can be unit tested, and can be car ried out by a single (or a pair of) software engineer(s) in at most a few weeks. The standard describes the process to be used and also provides a template for the top-level documentation. The instructional module’s sequence of mini-lectures and exercises associated with the use of this (and other) local standards are used throughout the course, which perforce covers more abstract software engineering material using traditional reading and writing assignments. The sequence of mini-lectures and hands-on assignments (many of which are done in small groups) constitutes an instructional module that can be used in any similar software engineering course.

Comparative Analysis of Evolving Software Systems Using the Gini Coefficient

Software metrics offer us the promise of distilling useful information from vast amounts of software in order to track development progress, to gain insights into the nature of the software, and to identify potential problems. Unfortunately, however, many software metrics exhibit highly skewed, non-Gaussian distributions. As a consequence, usual ways of interpreting these metrics --- for example, in terms of "average" values --- can be highly misleading. Many metrics, it turns out, are distributed like wealth --- with high concentrations of values in selected locations. We propose to analyze software metrics using the Gini coefficient, a higher-order statistic widely used in economics to study the distribution of wealth. Our approach allows us not only to observe changes in software systems efficiently, but also to assess project risks and monitor the development process itself. We apply the Gini coefficient to numerous metrics over a range of software projects, and we show that many metrics not only display remarkably high Gini values, but that these values are remarkably consistent as a project evolves over time.

The Emergence of Formal Control Specificity in Information Systems Outsourcing: A Process-View

Information systems (IS) outsourcing projects often fail to achieve initial goals. To avoid project failure, managers need to design formal controls that meet the specific contextual demands of the project. However, the dynamic and uncertain nature of IS outsourcing projects makes it difficult to design such specific formal controls at the outset of a project. It is hence crucial to translate high-level project goals into specific formal controls during the course of a project. This study seeks to understand the underlying patterns of such translation processes. Based on a comparative case study of four outsourced software development projects, we inductively develop a process model that consists of three unique patterns. The process model shows that the performance implications of emergent controls with higher specificity depend on differences in the translation process. Specific formal controls have positive implications for goal achievement if only the stakeholder context is adapted, while they are negative for goal achievement if in the translation process tasks are unintendedly adapted. In the latter case projects incrementally drift away from their initial direction. Our findings help to better understand control dynamics in IS outsourcing projects. We contribute to a process theoretic understanding of IS outsourcing governance and we derive implications for control theory and the IS project escalation literature.

Time and space partition platform for safe and secure flight software.

There are a number of research and development activities that are exploring Time and Space Partition (TSP) to implement safe and secure flight software. This approach allows to execute different real-time applications with different levels of criticality in the same computer board. In order to do that, flight applications must be isolated from each other in the temporal and spatial domains. This paper presents the first results of a partitioning platform based on the Open Ravenscar Kernel (ORK+) and the XtratuM hypervisor. ORK+ is a small, reliable real-time kernel supporting the Ada Ravenscar Computational model that is central to the ASSERT development process. XtratuM supports multiple virtual machines, i.e. partitions, on a single computer and is being used in the Integrated Modular Avionics for Space study. ORK+ executes in an XtratuM partition enabling Ada applications to share the computer board with other applications.

A component library to improve the reusability in the development of converged services

The evolution of communications networks to Next Generation Networks (NGN) has encouraged the development of new services. Nowadays, several technologies are being integrated into telecommunications services in order to provide new functionalities, resulting in what are known as converged services. The objective is to adapt the behavior of the services to the necessities of different users, generating customized services. Some of the main technologies involved in their development are those related to the Web. But due to this type of services implies the combination of different technologies, their development is a very complex process that has to be improved to reduce the time and cost required, with the aim of promoting the success of such services. This paper proposes to apply software reuse through the utilization of a component library and presents one focused on ECharts for SIP Servlets (E4SS). It is a framework, based on the SIP Servlet specification, which uses finite state machines for the definition of converged communications services. Also, to promote the use of the library, a methodology is proposed in order to facilitate the integration between the library operations and the software development cycle.

Evaluation of Development Projects: a Process-Centered Approach in the Outskirts of Lima, Peru.

Development cooperation projects work with people involved in processes of change and social transformation. While the main objective of the intervention is the development process itself, the project?s quality will be determined by the way of implementing it. Its success lies in the sustainability of the generated processes and the connection with them by the involved actors. The evaluation analyses both aspects. This article examines the evaluation, under a process approach, of a project on urban agriculture in Lima (Peru). The results show that the use of this approach, which combines different evaluation tools, allows the identification and analysis of the processes with the involved members, providing a better understanding of the real sustainability of the results.

Gestión de configuración y línea de productos para mejorar el proceso experimental en ingeniería del software

La Ingeniería del Software (IS) Empírica adopta el método científico a la IS para facilitar la generación de conocimiento. Una de las técnicas empleadas, es la realización de experimentos. Para que el conocimiento obtenido experimentalmente adquiera el nivel de madurez necesario para su posterior uso, es necesario que los experimentos sean replicados. La existencia de múltiples replicaciones de un mismo experimento conlleva la existencia de numerosas versiones de los distintos productos generados durante la realización de cada replicación. Actualmente existe un gran descontrol sobre estos productos, ya que la administración se realiza de manera informal. Esto causa problemas a la hora de planificar nuevas replicaciones, o intentar obtener información sobre las replicaciones ya realizadas. Para conocer con detalle la dimensión del problema a resolver, se estudia el estado actual de la gestión de materiales experimentales y su uso en replicaciones, así como de las herramientas de gestión de materiales experimentales. El estudio concluye que ninguno de los enfoques estudiados proporciona una solución al problema planteado. Este trabajo persigue como objetivo mejorar la administración de los materiales experimentales y replicaciones de experimentos en IS para dar soporte a la replicación de experimentos. Para satisfacer este objetivo, se propone la adopción en experimentación de los paradigmas de Gestión de Configuración del Software (GCS) y Línea de Producto Software (LPS). Para desarrollar la propuesta se decide utilizar el método de investigación acción (en inglés action research). Para adoptar la GCS a experimentación, se comienza realizando un estudio del proceso experimental como transformación de productos; a continuación, se realiza una adopción de conceptos fundamentada en los procesos del desarrollo software y de experimentación; finalmente, se desarrollan un conjunto de instrumentos, que se incorporan a un Plan de Gestión de Configuración de Experimentos (PGCE). Para adoptar la LPS a experimentación, se comienza realizando un estudio de los conceptos, actividades y fases que fundamentan la LPS; a continuación, se realiza una adopción de los conceptos; finalmente, se desarrollan o adoptan las técnicas, simbología y modelos para dar soporte a las fases de la Línea de Producto para Experimentación (LPE). La propuesta se valida mediante la evaluación de su: viabilidad, flexibilidad, usabilidad y satisfacción. La viabilidad y flexibilidad se evalúan mediante la instanciación del PGCE y de la LPE en experimentos concretos en IS. La usabilidad se evalúa mediante el uso de la propuesta para la generación de las instancias del PGCE y de LPE. La satisfacción evalúa la información sobre el experimento que contiene el PGCE y la LPE. Los resultados de la validación de la propuesta muestran mejores resultados en los aspectos de usabilidad y satisfacción a los experimentadores. ABSTRACT Empirical software engineering adapts the scientific method to software engineering (SE) in order to facilitate knowledge generation. Experimentation is one of the techniques used. For the knowledge generated experimentally to acquire the level of maturity necessary for later use, the experiments have to be replicated. As the same experiment is replicated more than once, there are numerous versions of all the products generated during a replication. These products are generally administered informally without control. This is troublesome when it comes to planning new replications or trying to gather information on replications conducted in the past. In order to grasp the size of the problem to be solved, this research examines the current state of the art of the management and use of experimental materials in replications, as well as the tools managing experimental materials. The study concludes that none of the analysed approaches provides a solution to the stated problem. The aim of this research is to improve the administration of SE experimental materials and experimental replications in support of experiment replication. To do this, we propose the adaptation of software configuration management (SCM) and software product line (SPL) paradigms to experimentation. The action research method was selected in order to develop this proposal. The first step in the adaptation of the SCM to experimentation was to analyse the experimental process from the viewpoint of the transformation of products. The concepts were then adapted based on software development and experimentation processes. Finally, a set of instruments were developed and added to an experiment configuration management plan (ECMP). The first step in the adaptation of the SPL to experimentation is to analyse the concepts, activities and phases underlying the SPL. The concepts are then adapted. Finally, techniques, symbols and models are developed or adapted in support of the experimentation product line (EPL) phases. The proposal is validated by evaluating its feasibility, flexibility, usability and satisfaction. Feasibility and flexibility are evaluated by instantiating the ECMP and the EPL in specific SE experiments. Usability is evaluated by using the proposal to generate the instances of the ECMP and EPL. The results of the validation of the proposal show that the proposal performs better with respect to usability issues and experimenter satisfaction.

UML 1.4 versus UML 2.0 as Languages to Describe Software Architectures.

ML 1.4 is widely accepted as the standard for representing the various software artifacts generated by a development process. For this reason, there have been attempts to use this language to represent the software architec- ture of systems as well. Unfortunately, these attempts have ended in representa- tions (boxes and lines) already criticized by the software architecture commu- nity. Recently, OMG has published a draft that will constitute the future UML 2.0 specification. In this paper we compare the capacities of UML 1.4 and UML 2.0 to describe software architectures. In particular, we study extensions of both UML versions to describe the static view of the C3 architectural style (a simplification of the C2 style). One of the results of this study is the difficulties found when using the UML 2.0 metamodel to describe the concept of connector in a software architecture.

Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

Novatests : metodología y herramienta software de apoyo para los ingenieros de prueba junior

La Ingeniería de Pruebas está especializada en la verificación y validación del Software,y formalmente se define como: “Proceso de desarrollo que emplea métodos rigurosos para evaluar la corrección y calidad del producto a lo largo de todo su ciclo de vida” [3]. Este proceso comprende un conjunto de métodos, procedimientos y técnicas formalmente definidas las cuales, usadas de forma sistemática, facilitan la identificación de la mayor cantidad de errores y fallos posibles de un software. Un software que pase un proceso riguroso de pruebas es un producto de calidad que seguramente facilitará la labor del Ingeniero de Software en la corrección de futuras incidencias, algunas de ellas generadas tras la implantación en el entorno real. Este proceso constituye un área de la Ingeniería del Software y una especialidad por tanto, de la misma. De forma simple, la consecución de una correcta Verificación y Validación del Software requiere de algunas actividades imprescindibles como: - Realizar un plan de pruebas del proyecto. - Actualizar dicho plan y corregirlo en caso necesario. - Revisar los documentos de análisis de requisitos. - Ejecutar las pruebas en las diferentes fases del desarrollo del proyecto. - Documentar el diseño y la ejecución de las pruebas. - Generar documentos con los resultados y anomalías de las pruebas ya ejecutadas. Actualmente, la Ingeniería de Pruebas no es muy reconocida como área de trabajo independiente sino más bien, un área inmersa dentro de la Ingeniería de Software. En el entorno laboral existe el perfil de Ingeniero de Pruebas, sin embargo pocos ingenieros de software tienen claro querer ser Ingenieros de Pruebas (probadores o testers) debido a que nunca han tenido la oportunidad de enfrentarse a actividades prácticas reales dentro de los centros de estudios universitarios donde cursan la carrera. Al ser un área de inherente ejercicio profesional, la parte correspondiente de la Ingeniería de Pruebas suele enfocarse desde un punto de vista teórico más que práctico. Hay muchas herramientas para la creación de pruebas y de ayuda para los ingenieros de pruebas, pero la mayoría son de pago o hechas a medida para grandes empresas que necesitan dicho software. Normalmente la gente conoce lo que es la Ingeniería de Pruebas únicamente cuando se empieza a adquirir experiencia en dicha área en el ejercicio profesional dentro de una empresa. Con lo cual, el acercamiento durante la carrera no necesariamente le ha ofrecido al profesional en Ingeniería, la oportunidad de trabajar en esta rama de la Ingeniería del Software y en algunos casos, NOVATests: Metodología y herramienta software de apoyo para los Ingenieros de Prueba Junior 4 los recién egresados comienzan su vida profesional con algún desconocimiento en este sentido. Es por el conjunto de estas razones, que mi intención en este proyecto es proponer una metodología y una herramienta software de apoyo a dicha metodología, para que los estudiantes de carreras de Ingeniería Software y afines, e ingenieros recién egresados con poca experiencia o ninguna en esta área (Ingenieros de Pruebas Junior), puedan poner en práctica las actividades de la Ingeniería de Pruebas dentro de un entorno lo más cercano posible al ejercicio de la labor profesional. De esta forma, podrían desarrollar las tareas propias de dicha área de una manera fácil e intuitiva, favoreciendo un mayor conocimiento y experiencia de la misma. ABSTRACT The software engineering is specialized in the verification and validation of Software and it is formally defined as: “Development process which by strict methods evaluates and corrects the quality of the product along its lifecycle”. This process contains a number of methods, procedures and techniques formally defined which used systematically make easier the identification of the highest quantity of error and failures within a Software. A software going through this rigorous process of tests will become a quality product that will help the software engineer`s work while correcting incidences. Some of them probably generated after the deployment in a real environment. This process belongs to the Software engineering and therefore it is a specialization itself. Simplifying, the correct verification and validation of a software requires some essential activities such as: -Create a Test Plan of the project - Update this Test Plan and correct if necessary - Check Requirement’s specification documents -Execute the different tests among all the phases of the project - Create the pertinent documentation about design and execution of these tests. - Generate the result documents and all the possible incidences the tests could contain. Currently, the Test engineering is not recognized as a work area but an area immerse within the Software engineering. The professional environment includes the role of Test engineer, but only a few software engineers have clear to become Test engineers (testers) because they have never had the chance to face this activities within the university study centers where they take study of this degree. Since there are little professional environments, this area is focused from a theoretical way instead of a more practical vision. There are plenty of tools helping the Test engineer, but most of them are paid tools or bespoke tools for big companies in need of this software. Usually people know what test engineering is by starting working on it and not before, when people start acquiring experience in this field within a company. Therefore, the degree studied have not approach this field of the Software engineering before and in some cases the graduated students start working without any knowledge in this area. Because of this reasons explained, it is my intention to propose this Project: a methodology and a software tool supporting this methodology so the students of software engineering and similar ones but also graduated students with little experience in this area (Junior Test Engineers), can afford practice in this field and get used to the activities related with the test engineering. Because of this they will be able to carry out the proper tasks of this area easier, enforcing higher and better knowledge and experience of it.

Estudio de una metodología de software para la predicción y análisis del balance paramétrico de buques para su aplicación en los criterios de estabilidad de segunda generación

El objetivo de ésta tesis es estudiar cómo desarrollar una aplicación informática que implemente algoritmos numéricos de evaluación de características hidrodinámicas de modelos geométricos representativos de carenas de buques. Se trata de especificar los requisitos necesarios que debe cumplir un programa para informático orientado a dar solución a un determinado problema hidródinámico, como es simular el comportamiento en balance de un buque sometido a oleaje, de popa o proa. una vez especificada la aplicación se realizará un diseño del programa; se estudiarán alternativas para implementar la aplicación; se explicará el proceso que ha de seguirse para obtener la aplicación en funcionamiento y se contrastarán los resultados obtenidos en la medida que sea posible. Se pretende sistematizar y sintetizar todo el proceso de desarrollo de software, orientado a la simulación del comportamiento hidrodinámico de un buque, en una metodología que se pondrá a disposición de la comunidad académica y científica en la forma que se considere más adecuada. Se trata, por tanto, de proponer una metodología de desarrollo de software para obetener una aplicación que facilite la evaluación de diferentes alternativas de estudio variando parámetros relativos al problema en estudio y que sea capaz de proporcionar resultados para su análisis. Así mismo se incide en cómo ha de conducirse en el proceso para que dicha aplicación pueda crecer, incorporando soluciones existentes no implementadas o nuevas soluciones que aparezcan en este ámbito de conocimiento. Como aplicación concreta de la aplicación se ha elegido implementar los algoritmos necesarios para evaluar la aparición del balance paramétrico en un buque. En el análisis de éste problema se considera de interés la representación geométrica que se hace de la carena del buque. Además de la carena aparecen otros elementos que tienen influencia determinante en éste estudio, como son las situación de mar y las situaciones de carga. Idealmente, el problema sería resuelto si se consiguiera determinar el ángulo de balance que se produce al enfrentar un buque a las diferentes condiciones de mar. Se pretende preparar un programa utilizando el paradigma de la orientación a objetos. Considero que es la más adecuada forma de modularizar el programa para poder utilizar diferentes modelos de una misma carena y así comparar los resultados de la evaluación del balance paramétrico entre sí. En una etapa posterior se podrían comparar los resultados con otros obtenidos empíricamente. Hablo de una nueva metodología porque pretendo indicar cómo se ha de construir una aplicación de software que sea usable y sobre la que se pueda seguir desarrollando. Esto justifica la selección del lenguaje de programación C++. Se seleccionará un núcleo geométrico de software que permita acoplar de forma versátil los distintos componentes de software que van a construir el programa. Este trabajo pretende aplicar el desarrollo de software a un aspecto concreto del área de conocimiento de la hidrodinámica. No se pretende aportar nuevos algoritmos para resolver problemas de hidrodinámica, sino diseñar un conjunto de objetos de software que implementen soluciones existentes a conocidas soluciones numéricas a dichos problemas. Se trata fundamentalmente de un trabajo de software, más que de hidrodinámica. Lo que aporta de novedad es una nueva forma de realizar un programa aplicado a los cálculos hidrodinámicos relativos a la determinación del balance paramétrico, que pueda crecer e incorporar cualquier novedad que pueda surgir más adelante. Esto será posible por la programación modular utilizada y los objetos que representan cada uno de los elementos que intervienen en la determinación del balance paramétrico. La elección de aplicar la metodología a la predicción del balance paramétrico se debe a que este concepto es uno de los elementos que intervienen en la evaluación de criterios de estabilidad de segunda generación que estan en estudio para su futura aplicación en el ámbito de la construcción naval. Es por tanto un estudio que despierta interés por su próxima utilidad. ABSTRACT The aim of this thesis is to study how to develop a computer application implementing numerical algorithms to assess hydrodynamic features of geometrical models of vessels. It is therefore to propose a methodology for software development applied to an hydrodynamic problem, in order to evaluate different study alternatives by varying different parameters related to the problem and to be capable of providing results for analysis. As a concrete application of the program it has been chosen to implement the algorithms necessary for evaluating the appearance of parametric rolling in a vessel. In the analysis of this problem it is considered of interest the geometrical representation of the hull of the ship and other elements which have decisive influence in this phenomena, such as the sea situation and the loading condition. Ideally, the application would determine the roll angle that occurs when a ship is on waves of different characteristics. It aims to prepare a program by using the paradigm of object oriented programming. I think it is the best methodology to modularize the program. My intention is to show how face the global process of developing an application from the initial specification until the final release of the program. The process will keep in mind the spefici objetives of usability and the possibility of growing in the scope of the software. This work intends to apply software development to a particular aspect the area of knowledge of hydrodynamics. It is not intended to provide new algorithms for solving problems of hydrodynamics, but designing a set of software objects that implement existing solutions to these problems. This is essentially a job software rather than hydrodynamic. The novelty of this thesis stands in this work focuses in describing how to apply the whole proccess of software engineering to hydrodinamics problems. The choice of the prediction of parametric balance as the main objetive to be applied to is because this concept is one of the elements involved in the evaluation of the intact stability criteria of second generation. Therefore, I consider this study as relevant usefull for the future application in the field of shipbuilding.

Integrating the development of data mining and data warehouses via model-driven engineering

Data mining is one of the most important analysis techniques to automatically extract knowledge from large amount of data. Nowadays, data mining is based on low-level specifications of the employed techniques typically bounded to a specific analysis platform. Therefore, data mining lacks a modelling architecture that allows analysts to consider it as a truly software-engineering process. Bearing in mind this situation, we propose a model-driven approach which is based on (i) a conceptual modelling framework for data mining, and (ii) a set of model transformations to automatically generate both the data under analysis (that is deployed via data-warehousing technology) and the analysis models for data mining (tailored to a specific platform). Thus, analysts can concentrate on understanding the analysis problem via conceptual data-mining models instead of wasting efforts on low-level programming tasks related to the underlying-platform technical details. These time consuming tasks are now entrusted to the model-transformations scaffolding. The feasibility of our approach is shown by means of a hypothetical data-mining scenario where a time series analysis is required.

It's all in the game: Teaching software process concepts

A major challenge in teaching software engineering to undergraduates is that most students have limited industry experience, so the problems addressed are unknown and hence unappreciated. Issues of scope prevent a realistic software engineering experience, and students often graduate with a simplistic view of software engineering’s challenges. Problems and Programmers (PnP) is a competitive, physical card game that simulates the software engineering process from requirements specification to product delivery. Deliverables are abstracted, allowing a focus on process issues and for lessons to be learned in a relatively short time. The rules are easy to understand and the game’s physical nature allows for face-to-face interaction between players. The game’s developers have described PnP in previous publications, but this paper reports the game’s use within a larger educational scheme. Students learn and play PnP, and then are required to create a software requirements specification based on the game. Finally, students reflect on the game’s strengths and weaknesses and their experiences in an individual essay. The paper discusses this approach, students’ experiences and overall outcomes, and offers an independent, critical look at the game, its use, and potential improvements.