Intermédiaires réactionnels de la fructose-1,6-biphosphate aldolase de Leishmania mexicana : comparaison avec l'enzyme de mammifère et recrutement de la région C-terminale

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

High performance cobalt-free Cu1.4Mn1.6O4 spinel oxide as an intermediate temperature solid oxide fuel cell cathode

In this work Cu_1.4Mn_1.6O₄ (CMO) spinel oxide is prepared and evaluated as a novel cobalt-free cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). Single phase CMO powder with cubic structure is identified using XRD. XPS results confirm that mixed Cu⁺/Cu²⁺ and Mn³⁺/Mn⁴⁺ couples exist in the CMO sample, and a maximum conductivity of 78 S cm⁻¹ is achieved at 800 °C. Meanwhile, CMO oxide shows good thermal and chemical compatibility with a 10 mol% Sc₂O₃ stabilized ZrO₂ (ScSZ) electrolyte material. Impedance spectroscopy measurements reveals that CMO exhibits a low polarization resistance of 0.143 Ω cm² at 800 °C. Furthermore, a Ni-ScSZ/ScSZ/CMO single cell demonstrates a maximum power density of 1076 mW cm⁻² at 800 °C under H₂ (3% H₂O) as the fuel and ambient air as the oxidant. These results indicate that Cu_1.4Mn_1.6O₄ is a superior and promising cathode material for IT-SOFCs.

Acetilação do exopolissacarídeo (1→6)-β-D-glucana (lasiodiplodana): derivatização química e caracterização

Lasiodiplodan is an exocellular β-glucan with biological functionalities such as antioxidant, antiproliferative, hypocholesterolemic, protective activity against DNA damage induced by doxorubicin and hypoglycemic activity. Chemical derivatization of polysaccharide macromolecules has been considered as a potentiating mechanism for bioactivity. In this context, this work proposes the derivatization of lasiodiplodan by acetylation. Acetic anhydride was used as derivatizing agent and pyridine as catalyst and reaction medium. The derivatives obtained were evaluated by its water solubility, degree of substitution (DS), antioxidant potential, and characterized by infrared spectroscopy (FT-IR), thermal analysis, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. Acetylated derivatives with different degrees of substitution (1.26; 1.03; 0.66 and 0.48) were obtained, and there was correlation between the concentration of derivatizing agent and DS. FT-IR spectroscopy analysis confirmed the insertion of acetyl groups into derivatized macromolecules (LAS-AC) through of specific bands concerning to carbonyl group (C = O) and increase in C-O vibration. SEM analysis indicated that native lasiodiplodan presents morphological structure in the form of thin films with translucent appearance and folds along its length. Derivatization led to morphological changes in the polymer, including aspects thickness, translucency and agglomeration. Thermal analysis indicated the native sample and derivative with DS 0.48 presented three weight loss stages. The first stage occurred until 125 ° C (loss of water) and there were two consecutive events of weight loss (200 ° C - 400 ° C) attributed to molecule degradation. Samples with DS 1.26; 1.03 and 0.66 demonstrated four weight loss stages. The first stage occurred until 130 ° C (loss of water), following by two consecutive events of weight loss (200 ° C - 392 ° C) attributed to degradation of the biopolymer. The fourth stage was between 381 ° C and 532 ° C (final decomposition) with exothermic peaks between 472 ° C and 491 ° C. X-ray diffraction patterns showed that native and acetylated lasiodiplodan have amorphous structure with semicrystalline regions. Derivatization did not contribute to increased solubility of the macromolecule, but potentiated its antioxidant capacity. Acetylation of lasiodiplodan allowed to obtaining a new macromolecule with higher antioxidant potential than the native molecule and with technological properties applicable in various industrial sectors.

Catalysts study of adipic acid synthesis from 1,6-hexanediol

Sustainable chemicals currently have a very limited market share due to current low production but biomass is expected to become one of the major renewable energy and fine chemicals sources in the coming years. Bearing in mind the compromise of all nations to climatic change remediation, the industries will need to use efficient catalysts and green processes to meet the requirements of emissions and efficiency. This project is expected to develop new catalysts to convert 1,6-hexanediol to adipic acid through a green approach based on the “nano-catalysis” and “green chemistry” concepts. Supported Au and Pd nanoparticles were used to study one-pot reaction of HDO oxidation to AA using O2 as a final oxidant and H2O as a solvent. Catalytic results showed that under low pressure O2 atmosphere and low temperature (< 120°C) AuNPs supported on basic-supports are more active than acid and amphoteric oxides. The effect of basic oxide (MgO) addition to MgF2 was studied. The study showed that doping of MgF2 with MgO increased significantly the activity of the catalyst. The best results were obtained with the Au/0.4MgF2-0.6MgO sample, which gave the selectivity to AA of 33% at HDO conversion of 62%.

Fotointerpretação da vegetação através da densitometria

Considerando-se que os critérios fotointerpretativos têm muito de subjetivo, com resultados que variam segundo o fotointérprete, pretendeu-se neste trabalho, ressaltar a utilização da densitometria como auxiliar na fotointerpretação da vegetação. No estudo foram utilizadas fotografias aéreas coloridas (transparências 23 x 23 cm) na escala 1:6.000. O filme colorido utilizado foi o Kodak Ektachrome MS Aerographic Film 2448. Desde que as fotografias estavam numa escala grande, foi bastante fácil identificar as culturas existentes na área bem como a vegetação natural. Cada categoria de vegetação foi classificada pela notação de Munsell. A densidade ótica foi medida por intermédio de um microdensitômetro de transmissão, marca Weston, modelo 877. Para cada item identificado nas fotografias foram feitas leituras de densidade ótica, para posterior comparação. Os dados obtidos foram utilizados para avaliar a importância das leituras densitométricas nas transparências coloridas, obtendo-se as seguintes conclusões principais: a) as medidas densitométricas ofereceram resultados mais consistentes que os obtidos por fotointerpretação convencional; b) a utilização do filme infravermelho colorido sugere a possibilidade de ampliar a resposta das leituras densitométricas.

Propriedades estruturais de géis de sílica preparados a partir da sonohidrólise do tetraetilortosilicato com adições de dimetilformamida

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rome, Italy, 1891 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Pianta di Roma, col patrocinio del comune di Roma. It was published by editore Loreto Pasqualucci [per] dall' Istituto cartografico italiano in 1891. Scale 1:6,000. Map in Italian.The image inside the map neatline is georeferenced to the surface of the earth and fit to the European Datum 1950, Universal Transverse Mercator (UTM) Zone 33N projected coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads and stations, drainage, built-up areas and selected buildings, walls, gates, fortification, ground cover, and more. Relief shown by shading. Includes also index and inset: Receniti di Roma nei successivi periodi della sua storia.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

East and Central China, 1841 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Karte von China mit dessen Eintheilung in 18 Provinzen, nach den neuesten u. zuverlässigsten Materialien entworfen, gezeichnet und bearbeitet von J. B. Roost ; in Stein grawirt v. D. Grasmüller. It was published der liter. artist. Anstalt der L.G. Cotta'schen Buchhandlung in 1841. Scale 1:6,500,000. Covers East and Central China, and the Korean Peninsula. Map in German. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Asia North Lambert Conformal Conic coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, roads, territorial and provincial boundaries, shoreline features, and more.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

Middle East and South Asia, 1903 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: A map of the countries between Constantinople and Calcutta : including Turkey in Asia, Persia, Afghanistan and Turkestan. It was published by Edward Stanford in 1903. Scale 1:6,969,600. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Asia North Lambert Conformal Conic coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, territorial boundaries, roads, railroads, ferry routes, shoreline features, and more. Relief shown by hachures and spot heights. This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

Map of the Dominion of Canada

J.E. Chalifour, Chief Geographer.

Proposed Boston Harbor Islands National Recreation Area

produced by the Metropolitan Area Planning Council GIS Lab.

Massachusetts: a map for Brent Lane of Dell Computer Corporation

produced by the Metropolitan Area Planning Council GIS Lab.

Geneva, Switzerland, 1908 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan de Genève et de sa banlieue. It was published by Briquet & fils in 1908. Scale 1:6,000. Covers Geneva, Switzerland. The image inside the map neatline is georeferenced to the surface of the earth and fit to the 'CH1903_LV03' coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, street-railroads, drainage, built-up areas and selected buildings, parks, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.