Audit report of the State University of Iowa, Iowa City, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2012 and 2011

Audit report of the State University of Iowa, Iowa City, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2012 and 2011

Régulation du canal à sodium épithélial par le sodim extracellulaire et développement d'un microsystème intégré pour l'étude électrophysiologique sur ovocytes de "Xenopus laevis"

Résumé : La première partie de ce travail de thèse est consacrée au canal à sodium épithélial (ENaC), l'élément clé du transport transépithélial de Na+ dans le néphron distal, le colon et les voies aériennes. Ce canal est impliqué dans certaines formes génétiques d'hypo- et d'hypertension (PHA I, syndrome de Liddle), mais aussi, indirectement, dans la mucoviscidose. La réabsorption transépithéliale de Na+ est principalement régulée par des hormones (aldostérone, vasopressine), mais aussi directement par le Na+, via deux phénomènes distincts, la « feedback inhibition » et la « self-inhibition » (SI). Ce second phénomène est dépendant de la concentration de Na+ extracellulaire, et montre une cinétique rapide (constante de temps d'environ 3 s). Son rôle physiologique serait d'assurer l'homogénéité de la réabsorption de Na+ et d'empêcher que celle-ci soit excessive lorsque les concentrations de Na+ sont élevées. Différents éléments appuient l'hypothèse de la présence d'un site de détection de la concentration du Na+ extracellulaire sur ENaC, gouvernant la SI. L'objectif de ce premier projet est de démontrer l'existence du site de détection impliqué dans la SI et de déterminer ses propriétés physiologiques et sa localisation. Nous avons montré que les caractéristiques de la SI (en termes de sélectivité et affinité ionique) sont différentes des propriétés de conduction du canal. Ainsi, nos résultats confirment l'hypothèse de l'existence d'un site de détection du Na+ (responsable de la transmission de l'information au mécanisme de contrôle de l'ouverture du canal), différent du site de conduction. Par ailleurs, ce site présente une affinité basse et indépendante du voltage pour le Na+ et le Li+ extracellulaires. Le site semble donc être localisé dans le domaine extracellulaire, plutôt que transmembranaire, de la protéine. L'étape suivante consiste alors à localiser précisément le site sur le canal. Des études précédentes, ainsi que des résultats préliminaires récemment obtenus, mettent en avant le rôle dans la self-inhibition du premiers tiers des boucles extracellulaires des sous-unités α et γ du canal. Le second projet tire son origine des limitations de la méthode classique pour l'étude des canaux ioniques, après expression dans les ovocytes de Xenopus laevis, par la méthode du voltage-clamp à deux électrodes, en particulier les limitations dues à la lenteur des échanges de solutions. En outre, cette méthode souffre de nombreux désavantages (manipulations délicates et peu rapides, grands volumes de solution requis). Plusieurs systèmes améliorés ont été élaborés, mais aucun ne corrige tous les désavantages de la méthode classique Ainsi, l'objectif ici est le développement d'un système, pour l'étude électrophysiologique sur ovocytes, présentant les caractéristiques suivantes : manipulation des cellules facilitée et réduite, volumes de solution de perfusion faibles et vitesse rapide d'échange de la perfusion. Un microsystème intégré sur une puce a été élaboré. Ces capacités de mesure ont été testées en utilisant des ovocytes exprimant ENaC. Des résultats similaires (courbes IV, courbes dose-réponse au benzamil) à ceux obtenus avec le système traditionnel ont été enregistrés avec le microsystème. Le temps d'échange de solution a été estimé à ~20 ms et des temps effectifs de changement ont été déterminés comme étant 8 fois plus court avec le nouveau système comparé au classique. Finalement, la SI a été étudiée et il apparaît que sa cinétique est 3 fois plus rapide que ce qui a été estimé précédemment avec le système traditionnel et son amplitude de 10 à 20 % plus importante. Le nouveau microsystème intégré apparaît donc comme adapté à la mesure électrophysiologique sur ovocytes de Xenopus, et possèdent des caractéristiques appropriées à l'étude de phénomènes à cinétique rapide, mais aussi à des applications de type « high throughput screening ». Summary : The first part of the thesis is related to the Epithelial Sodium Channel (ENaC), which is a key component of the transepithelial Na+ transport in the distal nephron, colon and airways. This channel is involved in hypo- and hypertensive syndrome (PHA I, Liddle syndrome), but also indirectly in cystic fibrosis. The transepithelial reabsorption of Na+ is mainly regulated by hormones (aldosterone, vasopressin), but also directly by Na+ itself, via two distinct phenomena, feedback inhibition and self-inhibition. This latter phenomenon is dependant on the extracellular Na+ concentration and has rapid kinetics (time constant of about 3 s). Its physiological role would be to prevent excessive Na+ reabsorption and ensure this reabsorption is homogenous. Several pieces of evidence enable to propose the hypothesis of an extracellular Na+ sensing site on ENaC, governing self-inhibition. The aim of this first project is to demonstrate the existence of the sensing site involved in self-inhibition and to determine its physiological properties and localization. We show self-inhibition characteristics (ionic selectivity and affinity) are different from the conducting properties of the channel. Our results support thus the hypothesis that the Na+ sensing site (responsible of the transmission of the information about the extracellular Na+ concentration to the channel gating mechanism), is different from the channel conduction site. Furthermore, the site has a low and voltage-insensitive affinity for extracellular Na+ or Li+. This site appears to be located in the extracellular domain rather than in the transmembrane part of the channel protein. The next step is then to precisely localize the site on the channel. Some previous studies and preliminary results we recently obtained highlight the role of the first third of the extracellular loop of the α and γ subunits of the channel in self-inhibition. The second project originates in the limitation of the classical two-electrode voltageclamp system classically used to study ion channels expressed in Xenopus /aevis oocytes, in particular limitations related to the slow solution exchange time. In addition, this technique undergoes several drawbacks (delicate manipulations, time consumption volumes). Several improved systems have been built up, but none corrected all these detriments. The aim of this second study is thus to develop a system for electrophysiological study on oocytes featuring an easy and reduced cell handling, small necessary perfusion volumes and fast fluidic exchange. This last feature establishes the link with the first project, as it should enable to improve the kinetics analysis of self-inhibition. A PDMS chip-based microsystem has been elaborated. Its electrophysiological measurement abilities have been tested using oocytes expressing ENaC. Similar measurements (IV curves of benzamil-sensitive currents, benzamil dose-response curves) have been obtained with this system, compared to the traditional one. The solution exchange time has been estimated at N20 ms and effective exchange times (on inward currents) have been determined as 8 times faster with the novel system compared to the classical one. Finally, self-inhibition has been studied and it appears its kinetics is 3 times faster and its amplitude 10 to 20 % higher than what has been previously estimated with the traditional system. The novel integrated microsystem appears therefore to be convenient for electrophysiological measurement on Xenopus oocytes, and displays features suitable for the study of fast kinetics phenomenon, but also high throughput screening applications. Résumé destiné large public : Le corps humain est composé d'organes, eux-mêmes constitués d'un très grand nombre de cellules. Chaque cellule possède une paroi appelée membrane cellulaire qui sépare l'intérieur de cette cellule (milieu intracellulaire) du liquide (milieu extracellulaire) dans lequel elle baigne. Le maintien de la composition stable de ce milieu extracellulaire est essentiel pour la survie des cellules et donc de l'organisme. Le sodium est un des composants majeurs du milieu extracellulaire, sa quantité dans celui-ci doit être particulièrement contrôlée. Le sodium joue en effet un rôle important : il conditionne le volume de ce liquide extracellulaire, donc, par la même, du sang. Ainsi, une grande quantité de sodium présente dans ce milieu va de paire avec une augmentation du volume sanguin, ce qui conduit l'organisme à souffrir d'hypertension. On se rend donc compte qu'il est très important de contrôler la quantité de sodium présente dans les différents liquides de l'organisme. Les apports de sodium dans l'organisme se font par l'alimentation, mais la quantité de sodium présente dans le liquide extracellulaire est contrôlée de manière très précise par le rein. Au niveau de cet organe, on appelle urine primaire le liquide résultant de la filtration du sang. Elle contient de nombreuses substances, des petites molécules, dont l'organisme a besoin (sodium, glucose...), qui sont ensuite récupérées dans l'organe. A la sortie du rein, l'urine finale ne contient plus que l'excédent de ces substances, ainsi que des déchets à éliminer. La récupération du sodium est plus ou moins importante, en fonction des ajustements à apporter à la quantité présente dans le liquide extracellulaire. Elle a lieu grâce à la présence de protéines, dans les membranes des cellules du rein, capables de le transporter et de le faire transiter de l'urine primaire vers le liquide extracellulaire, qui assurera ensuite sa distribution dans l'ensemble de l'organisme. Parmi ces protéines « transporteurs de sodium », nous nous intéressons à une protéine en particulier, appelée ENaC. Il a été montré qu'elle jouait un rôle important dans cette récupération de sodium, elle est en effet impliquée dans des maladies génétiques conduisant à l'hypo- ou à l'hypertension. De précédents travaux ont montré que lorsque le sodium est présent en faible quantité dans l'urine primaire, cette protéine permet d'en récupérer une très grande partie. A l'inverse, lorsque cette quantité de sodium dans l'urine primaire est importante, sa récupération par le biais d'ENaC est réduite. On parle alors d'autorégulation : la protéine elle-même est capable d'adapter son activité de transport en fonction des conditions. Ce phénomène d'autorégulation constitue a priori un mécanisme préventif visant à éviter une trop grande récupération de sodium, limitant ainsi les risques d'hypertension. La première partie de ce travail de thèse a ainsi consisté à clarifier le mécanisme d'autorégulation de la protéine ENaC. Ce phénomène se caractérise en particulier par sa grande vitesse, ce qui le rend difficile à étudier par les méthodes traditionnelles. Nous avons donc, dans une deuxième partie, développé un nouveau système permettant de mieux décrire et analyser cette « autorégulation » d'ENaC. Ce second projet a été mené en collaboration avec l'équipe de Martin Gijs de l'EPFL.

Small RNAs controlled by two-component systems.

Two-component systems (TCSs) allow bacteria to monitor diverse environmental cues and to adjust gene expression accordingly at the transcriptional level. It has been recently recognized that prokaryotes also regulate many genes and operons at a posttranscriptional level with the participation of small, noncoding RNAs which serve to control translation initiation and stability of target mRNAs, either directly by establishing antisense interactions or indirectly by antagonizing RNA-binding proteins. Interestingly, the expression of a subset of these small RNAs is regulated by TCSs and in this way, the small RNAs expand the scope of genetic control exerted by TCSs. Here we review the regulatory mechanisms and biological relevance ofa number of small RNAs under TCS control in Gram-negative and -positive bacteria. These regulatory systems govern, for instance, porin-dependent permeability of the outer membrane, quorum-sensing control of pathogenicity, or biocontrol activity. Most likely, this emerging and rapidly expanding field of molecular microbiology will provide more and more examples in the near future.

Audit report of Iowa State University of Science and Technology, Ames, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2013 and 2012

Audit report of Iowa State University of Science and Technology, Ames, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2013 and 2012

Audit report of the State University of Iowa, Iowa City, Iowa, (University of Iowa) and its discretely presented component units as of and for the years ended June 30, 2013 and 2012

Audit report of the State University of Iowa, Iowa City, Iowa, (University of Iowa) and its discretely presented component units as of and for the years ended June 30, 2013 and 2012

Estimation of the noisy component of anatomical backgrounds.

The knowledge of the relationship that links radiation dose and image quality is a prerequisite to any optimization of medical diagnostic radiology. Image quality depends, on the one hand, on the physical parameters such as contrast, resolution, and noise, and on the other hand, on characteristics of the observer that assesses the image. While the role of contrast and resolution is precisely defined and recognized, the influence of image noise is not yet fully understood. Its measurement is often based on imaging uniform test objects, even though real images contain anatomical backgrounds whose statistical nature is much different from test objects used to assess system noise. The goal of this study was to demonstrate the importance of variations in background anatomy by quantifying its effect on a series of detection tasks. Several types of mammographic backgrounds and signals were examined by psychophysical experiments in a two-alternative forced-choice detection task. According to hypotheses concerning the strategy used by the human observers, their signal to noise ratio was determined. This variable was also computed for a mathematical model based on the statistical decision theory. By comparing theoretical model and experimental results, the way that anatomical structure is perceived has been analyzed. Experiments showed that the observer's behavior was highly dependent upon both system noise and the anatomical background. The anatomy partly acts as a signal recognizable as such and partly as a pure noise that disturbs the detection process. This dual nature of the anatomy is quantified. It is shown that its effect varies according to its amplitude and the profile of the object being detected. The importance of the noisy part of the anatomy is, in some situations, much greater than the system noise. Hence, reducing the system noise by increasing the dose will not improve task performance. This observation indicates that the tradeoff between dose and image quality might be optimized by accepting a higher system noise. This could lead to a better resolution, more contrast, or less dose.

BCL9 is an essential component of canonical Wnt signaling that mediates the differentiation of myogenic progenitors during muscle regeneration.

Muscle stem cells and their progeny play a fundamental role in the regeneration of adult skeletal muscle. We have previously shown that activation of the canonical Wnt/beta-catenin signaling pathway in adult myogenic progenitors is required for their transition from rapidly dividing transient amplifying cells to more differentiated progenitors. Whereas Wnt signaling in Drosophila is dependent on the presence of the co-regulator Legless, previous studies of the mammalian ortholog of Legless, BCL9 (and its homolog, BCL9-2), have not revealed an essential role of these proteins in Wnt signaling in specific tissues during development. Using Cre-lox technology to delete BCL9 and BCL9-2 in the myogenic lineage in vivo and RNAi technology to knockdown the protein levels in vitro, we show that BCL9 is required for activation of the Wnt/beta-catenin cascade in adult mammalian myogenic progenitors. We observed that the nuclear localization of beta-catenin and downstream TCF/LEF-mediated transcription, which are normally observed in myogenic progenitors upon addition of exogenous Wnt and during muscle regeneration, were abrogated when BCL9/9-2 levels were reduced. Furthermore, reductions of BCL9/9-2 inhibited the promotion of myogenic differentiation by Wnt and the normal regenerative response of skeletal muscle. These results suggest a critical role of BCL9/9-2 in the Wnt-mediated regulation of adult, as opposed to embryonic, myogenic progenitors.

N-Glycans on secretory component: mediators of the interaction between secretory IgA and gram-positive commensals sustaining intestinal homeostasis.

Human beings live in symbiosis with billions of microorganisms colonizing mucosal surfaces. The understanding of the mechanisms underlying this fine-tuned intestinal balance has made significant processes during the last decades. We have recently demonstrated that the interaction of SIgA with Gram-positive bacteria is essentially based on Fab-independent, glycan-mediated recognition. Results obtained using mouse hybridoma- and colostrum-derived secretory IgA (SIgA) consistently show that N-glycans present on secretory component (SC) play a crucial role in the process. Natural coating may involve specific Gram-positive cell wall components, which may explain selective recognition at the molecular level. More widely, the existence of these complexes is involved in the modulation of intestinal epithelial cell (IEC) responses in vitro and the formation of intestinal biofilms. Thus, SIgA may act as one of the pillars in homeostatic maintenance of the microbiota in the gut, adding yet another facet to its multiple roles in the mucosal environment.

In vitro combination of human and bovine free secretory component with IgA of various species.

The free form of the secretory component usually associated with secretory IgA can be isolated from human and bovine milk. These free secretory components of different origin combine in vitro with human polymeric myeloma IgA, with mouse myeloma IgA, and with the serum IgA of nine different mammalian species.

Effect of drift on segregation in two-component diffusion-limited aggregation

An effect of drift is investigated on the segregation pattern in diffusion-limited aggregation (DLA) with two components (A and B species). The sticking probability PAB (=PBA) between the different species is introduced into the DLA model with drift, where the sticking probability PAA (=PBB) between the same species equals 1. By using computer simulation it is found that the drift has an important effect on not only the morphology but also the segregation pattern. Under the drift and the small sticking probability, a characteristic pattern appears where elongated clusters of A species and of B species are periodically dispersed. The period decreases with increasing drift. The periodic structure of the deposits is characterized by an autocorrelation function. The shape of the cluster consisting of only A species (or B species) shows a vertically elongated filamentlike structure. Each cluster becomes vertically longer with decreasing sticking probability PAB. The segregation pattern is distinctly different from that with no drift and a small sticking probability PAA. The effect of the concentration on the segregation pattern is also shown.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Audit report of the financial statements of the governmental activities, the business type activities, the aggregate discretely presented component units, each major fund and the aggregate remaining fund information of the State of Iowa as of and for the year ended June 30, 2014

Audit report of the financial statements of the governmental activities, the business type activities, the aggregate discretely presented component units, each major fund and the aggregate remaining fund information of the State of Iowa as of and for the year ended June 30, 2014

Browsing a component library using Non-functional Information

This paper highlights the role of non-functional information when reusing from a component library. We describe a method for selecting appropriate implementations of Ada packages taking non-functional constraints into account; these constraints model the context of reuse. Constraints take the form of queries using an interface description language called NoFun, which is also used to state non-functional information in Ada packages; query results are trees of implementations, following the import relationships between components. We define two different situations when reusing components, depending whether we take the library being searched as closed or extendible. The resulting tree of implementations can be manipulated by the user to solve ambiguities, to state default behaviours, and by the like. As part of the proposal, we face the problem of computing from code the non-functional information that determines the selection process.

The fixation of the cemented femoral component. Effects of stem stiffness, cement thickness and roughness of the cement-bone surface.

After cemented total hip arthroplasty (THA) there may be failure at either the cement-stem or the cement-bone interface. This results from the occurrence of abnormally high shear and compressive stresses within the cement and excessive relative micromovement. We therefore evaluated micromovement and stress at the cement-bone and cement-stem interfaces for a titanium and a chromium-cobalt stem. The behaviour of both implants was similar and no substantial differences were found in the size and distribution of micromovement on either interface with respect to the stiffness of the stem. Micromovement was minimal with a cement mantle 3 to 4 mm thick but then increased with greater thickness of the cement. Abnormally high micromovement occurred when the cement was thinner than 2 mm and the stem was made of titanium. The relative decrease in surface roughness augmented slipping but decreased debonding at the cement-bone interface. Shear stress at this site did not vary significantly for the different coefficients of cement-bone friction while compressive and hoop stresses within the cement increased slightly.