Aplicação da metodologia de superfície de resposta na remediação de um solo arenoso contaminado artificialmente com cobre

Soil flushing is an alternative remediation technology for soils contaminated with heavy metals, which the main contaminant removing process consists in percolating an extraction solution. This work aimed to use the response surface methodology to point out combinations among the parameters of the extraction solution (Na2EDTA concentration, volume e pH) in order to reduce the concentration of copper in a sandy soil to risk levels lower than the intervention levels for exposure scenarios adopted by the Environmental Company of Sao Paulo State. Thus, a series of tests in leaching columns were carried out using a Fluvisol artificially contaminated (1257,3 mg kg-1). The tests were conducted in triplicate and setup a central composite rotatable design with 15 different parameters combinations of the extraction solution and one replicate in the center point. Using 5% significance level, the adjusted model (R2 = 0,98) indicated combinations of Na2EDTA concentration, pH and volume of the extraction solution which allow reduction of copper concentration below levels reported by environmental agency of Sao Paulo State for industrial, residential, agricultural or maximum exposure scenarios.

Agaricus blazei as a Substrate for the Production of β-1,3-Glucanase by Trichoderma harzianum Rifai

Extracellular β-1,3-glucanase was produced by Trichoderma harzianum Rifai cultivated in the Agaricus blazei (Agaricus brasiliensis) extract as a substrate in submerged fermentation. A 22-central composite factorial design was developed using the time of culture (x1/day) and Agaricus blazei extract concentration (x2/(g/L)) as variables, and the results were analyzed using response surface methodology (RSM). The results showed that the Agaricus blazei extract concentration was the most important variable in the production of β-1,3-glucanase, and the maximum β-1,3-glucanase activity (0.77 U/mL) was obtained in one day of cultivation. The β-glucan present in the cell wall of Agaricus blazei mushroom proved to be a good substrate for inducing the production of specific β-1,3-glucanase by Trichoderma harzianum Rifai.

Time and temperature on the storage of oocytes from jundiá catfish, Rhamdia quelen

The objective of this study was to evaluate the effects of three water and storage temperatures on the oocytes of the jundiá catfish, Rhamdia quelen. A factorial experimental design over time, with treatments completed in triplicate every 48 h, was used (5 × 3 × 3 × 3) to study the exposure of the oocytes to temperatures of 15, 25 and 35. °C and activated with water at 15, 25 and 35. °C each at 0, 45, 90, 135 and 180 minutes post-collection. Linear regression analysis for the response surface model indicated an interaction (p<0.05) between time and temperature of exposure with greater values for fertilization, hatching and normal larvae rates at the time of oocyte collection (70.2 ± 8.4% fertilized oocytes, 66.7 ± 29.4% hatched eggs and 30.3 ± 25.0% normal larvae). According to the statistical model, the water temperature that resulted in the highest fertilization rate was 25.6. °C (p<0.05). The rates of fertilization, hatching and normal larvae correlated positively (p<0.05) with one another, showing that these parameters can be used in the measurement of oocyte quality. Artificial fertilization of oocytes is recommended immediately after collection; if storage is necessary, it should be carried out at 15. °C. © 2011 Elsevier B.V.

Keratinase production by new strain of Bacillus Amyloliquefaciens: Application of statistical experimental design for optimization of keratinase production

Feathers are rich in amino acids and can be employed as a dietary protein supplement for animal feed. Microbial degradation is an alternative technology for improving the nutritional value of feathers. Other potential applications of keratinase include use in the leather industry, detergents and medicine as well as the pharmaceutical for the treatment of acne, psoriasis and calluses. A new keratinolytic enzyme production bacterium was isolated from a poultry processing plant. To improve keratinase yield, statistically based experimental designs were applied to optimize three significant variables: temperature, substrate concentration (feathers) and agitation speed. Response surface methodology demonstrated an increase in keratinolytic activity at temperature, agitation speed and substrate concentration of 26.6°C, 150 rpm and 2%, respectively. Liquid chromatography revealed the release of amino acids in the Bacillus amyloliquefaciens culture broth, thereby demonstrating the potential of feather meal in the animal feed industry. © Global Science Publications.

Optimisation of High Hydrostatic Pressure Processing of Pêra Rio Orange Juice

The influence of high hydrostatic pressure (HHP) on Pêra Rio orange juice was investigated using response surface methodology. A central composite design was used to evaluate the effects of three processing conditions (independent variables), namely pressure (100-600 MPa), temperature (30-60 °C) and time (30-360 s), on the native microflora and pectin methylesterase (PME) activity of orange juice. Analysis of variance showed that second-order polynomial models fitted well with the experimental data for PME residual activity (R2 = 0.9586, p < 0.001) and aerobic microorganism count (R2 = 0.9879, p < 0.001). The optimum HHP processing conditions to produce orange juice with PME residual activity of less than 20 % and low microorganism count (<2 log cycles CFU/mL) were 550 to 600 MPa, 55 to 60 °C and 330 to 360 s. © 2013 Springer Science+Business Media New York.

Extrusion of flavored corn grits: Structural characteristics, volatile compounds retention and sensory acceptability

The effects of the moisture content of the raw material, extrusion temperature and screw speed on flavor retention, sensory acceptability and structure of corn grits extrudates flavored with isovaleraldehyde, ethyl butyrate and butyric acid were investigated. Higher temperature resulted in more expanded extrudates with lower density and cutting force, while higher moisture content increased ethyl butyrate retention. The most acceptable extrudates were those obtained with low moisture content, under conditions of high extrusion temperature and high screw speed, or low screw speed and low extrusion temperature, whereas the aroma intensity closest to the ideal was observed under conditions of low extrusion temperature and low moisture content of the raw material. © 2013 Elsevier Ltd.

Produção de xilanases por Aspergillus niger utilizando planejamento experimental: purificação de xilanase

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adição de precursores em meio complexo solúvel para a produção de Cefamicina C por Streptomyces clavuligerus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impacto da tecnologia de alta pressão hidrostática sobre a qualidade do suco de laranja

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O emprego da metodologia de superfície de resposta no desenvolvimento de um novo produto simbiótico, fermentado com Enterococcus faecium CRL 183 e Lactobacillus helveticus ssp jugurti 416, à base de extratos aquosos de soja e de Yacon (Smallanthus sonchifolius)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desidratação osmótica da manga cv. Palmer em solução de sacarose com e sem adição de ácido ascórbico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção otimizada de alginato e plástico biodegradável (poli-hidroxibutirato) por Azotobacter vinelandii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seleção de um suporte sintético para imobilizar células do Botryospaheria rhodina e comparação da produção de lacase por células livres e imobilizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de levana e bioetanol utilizando cascas de banana por Zymomona mobilis

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Efeito da extrusão termoplástica na retenção de aroma e na estrutura de extrusados de grits de milho aromatizado

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE