Hair coat characteristics and sweating rate of Braford cows in Brazil

This paper deals with the effects of hair coat characteristics on the sweating rate of Brazilian Braford cows and estimation of heritabilities and genetic correlations of these traits. Data (n=1607) on hair length, coat thickness, hair diameter, number of hairs per unit area, coat reflectance and sweating rate were recorded from heifers and cows of a commercial herd managed on range under extensive system. The data were analyzed considering the following effects on the model for hair coat traits: classes of sires and contemporary groups; linear effects of month and genotype; linear and quadratic effects of age. The effect of sire was important (P<0.05) for all hair coat traits, except for number of hairs; contemporary groups affected (P<0.05) all hair coat traits; the effect of sampling month was important (P<0.05) for hair length and reflectance; genotype affected (P<0.05) hair length, diameter and coat reflectance; the quadratic effect of age was important (P<0.05) only for coat reflectance. Two models were used to analyze the sweating rate. The first model considered the following fixed effects: classes of contemporary groups and sires; linear effect of genotype, coat thickness, hair length, hair diameter, number of hairs, coat reflectance; linear and quadratic effects of time of day, age, air temperature, partial vapour pressure and radiant heat load. The second model used for the sweating rate considered the same fixed effects for the first model, except that the hair coat characteristics were adjusted for important effects used in the models to analyze hair coat traits. All meteorological factors and contemporary groups were important (P<0.05) on variation of sweating rate in both models. The Restricted Maximum. Likelihood (REML) method was used to estimate variance and covariance components under the sire model. Results included heritability estimates in narrow (h(2)) and broad (H) sense for single-trait analyzes: hair thickness (h(2)=0.16; H-2=0.26); hair length (h(2)=0.18; H-2=0.39); number of hairs (h(2)=0.08 +/- 0.07; H-2=0.08 +/- 0.07); hair diameter (h(2)=0.12 +/- 0.07; H-2=0.12 +/- 0.07); coat reflectance (h(2)=0.30; H-2=0.42); and sweating rate (h(2)=0.10 +/- 0.07; H-2=0.10 +/- 0.07). In general, the genetic correlations between the adaptive traits were favorable as for the direction to select for adaptation in tropical environment; however, they presented high standard errors. The results of this study imply that hair coat characteristics and sweating ability are important for the adaptability to heat stress and they must be better studied and further considered for selection for genetic progress of adaptation in tropical environment. (C) 2007 Elsevier B.V All rights reserved.

Determination of weathering rate of the Morro do Ferro Th-REEs deposit, Brazil using U-isotope method

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Studies on the respiration rate of free and immobilized cells of Cephalosporium acremonium in cephalosporin C production

Bioprocesses using filamentous fungi immobilized in inert supports present many advantages when compared to conventional free cell processes. However, assessment of the real advantages of the unconventional process demands a rigorous study of the limitations to diffusional mass transfer of the reagents, especially concerning oxygen. In this work, a comparative study was carried out on the cephalosporin C production process in defined medium containing glucose and sucrose as main carbon and energy sources, by free and immobilized cells of Cephalosporium acremonium ATCC 48272 in calcium alginate gel beads containing alumina. The effective diffusivity of oxygen through the gel beads and the effectiveness factors related to the respiration rate of the microorganism were determined experimentally. By applying Monod kinetics, the respiration kinetics parameters were experimentally determined in independent experiments in a complete production medium. The effectiveness factor experimental values presented good agreement with the theoretical values of the approximated zero-order effectiveness factor, considering the dead core model. Furthermore, experimental results obtained with immobilized cells in a 1.7-L tower bioreactor were compared with those obtained in 5-L conventional fermenter with free cells. It could be concluded that it is possible to attain rather high production rates working with relatively large diameter gel beads (ca. 2.5 mm) and sucrose consumption-based productivity was remarkably higher with immobilized cells, i.e., 0.33 gCPC/kg sucrose/h against 0.24 gCPC/kg sucrose/h in the aerated stirred tank bioreactor process. (C) 1999 John Wiley & Sons, Inc.

Level crossing rate of Nakagami-m fading signal: Field trials and validation

Field trial measurements are used to validate the level crossing rate formula derived in an exact manner recently for the Nakagami-m signal. The formula reveals an excellent fit to measurements in situations other than those for which the Rice model is more appropriate.

Dissociated time course recovery between rate of force development and peak torque after eccentric exercise

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Micellar modification of drug stability: analysis of the effect of hexadecyltrimethylammonium halides on the rate of degradation of cephaclor

The intra- and intermolecular rates of degradation of cephaclor were determined with and without hexadecyltrimethylammonium bromide (CTABr). Micellar-derived spectral shifts were used to measure the association of the ionic forms as well as to determine the effect of CTABr on the apparent acid dissociation constant of the antibiotic. The rate of degradation of cephaclor increased with detergent and was salt sensitive. Micellar effects were analyzed quantitatively within the frame-work of the speudophase ion exchange model. All experimental data were fitted to this model which was used to predict the combined effects of pH and detergent concentration. Micelles increased the rate of OH- attack on cephaclor; most of the effect was due to the concentration of reagents in the micellar pseudophase. The intramolecular degradation was catalyzed 25-fold by micelles, and a working hypothesis to rationalize this effect is proposed. The results demonstrate that quantitative analysis can be utilized to assess and predict effects of detergents on drug stability.

Effects of vinasse upon the decomposition rate of Ocotea pulchella leaves in cerrado soil

Ocotea pulchella leaves placed on soil treated with vinasse lost 64.48% of their organic matter, whereas the leaves sampled in the control parcels lost 70.68%, after one year. -from Authors

Effects of intracerebroventricular injections of losartan or PD123319 on arterial pressure and heart rate of sodium replete and sodium deplete rats

Angiotensin II (Ang II) non-peptide antagonists were injected i.c.v. (6.25-200 nmol, n = 5-8 rats/group): In sodium replete rats, losartan (AT1 receptor antagonist) induced an increase in mean arterial pressure (MAP) and in heart rate (HR) by 3rd ventricular (3rdV) injection, and a weaker pressor response and bradycardia by 4th ventricular (4thV) injection. PD123319 (AT2 receptor antagonist) induced an increase in MAP and in HR by 3rdV injection, and an increase in MAP and no alteration in HR by 4thV injection. In sodium deplete (furosemide plus removal of ambient sodium for 24 h) rats, losartan induced an increase in MAP and no alteration in HR by 3rdV injection, and no alteration in MAP and bradycardia by 4thV injection. PD123319 induced an increase in MAP and in HR by 3rdV injection, and an increase in MAP and bradycardia by 4thV injection. Thus, there was no fall in MAP by central injections of Ang II antagonists. Intravenous injection of losartan, but not of PD123319, induced a fall in MAP in both sodium replete and sodium deplete animals. Therefore, losartan and PD123319 can have similar effects on MAP and HR when injected intracerebroventricularly, although some differences are also present. The bradycardia is consistent with an withdrawal of Ang II inhibitory action on baroreflex.

Growth rate of the mounds of Nasutitermes sp. (Isoptera: Termitidae)

The growth rate of mounds of Nasutitermes sp. was evaluated by taking monthly measurements of the diameter and the height of ten mounds during twelve months. Through these data, the monthly volumes were calculated for each of them and, later, a dispersion diagram between the volume of each mound and the number of days from the first observation was obtained. From this diagram, it was observed that during the 335 days of observation, the rate of growth of these mounds was null.

Effect of benzylaminopurine (BAP) on clonal propagation rate of Curcuma longa L.

Curcuma longa L. is used in many countries for its flavor, and medicinal and cosmetic attributes, as well as for its peculiar starch characteristics. These factors have driven an interest in the in vitro propagation of this species, looking for germplasm bank maintenance, production of disease free plants, genetic variability induction from callus, and as a tool for starch research. However, there are few reports concerning the micropropagation of Curcuma longa. The in vitro propagation rate of this species, cultured under two benzylaminopurine (BAP) concentrations, was the aim of this research.

Application of ARX neural networks to model the rate of penetration of petroleum wells drilling

Bit performance prediction has been a challenging problem for the petroleum industry. It is essential in cost reduction associated with well planning and drilling performance prediction, especially when rigs leasing rates tend to follow the projects-demand and barrel-price rises. A methodology to model and predict one of the drilling bit performance evaluator, the Rate of Penetration (ROP), is presented herein. As the parameters affecting the ROP are complex and their relationship not easily modeled, the application of a Neural Network is suggested. In the present work, a dynamic neural network, based on the Auto-Regressive with Extra Input Signals model, or ARX model, is used to approach the ROP modeling problem. The network was applied to a real oil offshore field data set, consisted of information from seven wells drilled with an equal-diameter bit.