Attractive holographic c-functions

Using the attractor mechanism for extremal solutions in N = 2 gauged supergravity, we construct a c-function that interpolates between the central charges of theories at ultraviolet and infrared conformal fixed points corresponding to anti-de Sitter geometries. The c-function we obtain is couched purely in terms of bulk quantities and connects two different dimensional CFTs at the stable conformal fixed points under the RG flow.

Net-like Ferromagnetic Mnsb Film Deposited on Porous Silicon Substrates

MnSb films were deposited on porous silicon substrates by physical vapor deposition (PVD) technique. Modulation effects due to the substrate on microstructure and magnetic properties of the MnSb film's were studied by scanning electron microscope (SEM), X-ray diffraction (XRD) and measurements of hysteresis loops. SEM images of the MnSb films indicate that net-like structures were obtained because of the special morphology of the substrates. The net-like MnSb films exhibit some novel magnetic properties different from the unpatterned referenced samples. For example, in the case of net-like morphology, the coercive field is as low as 60 Oe.

Influence of Obstacle-Produced Turbulence on Development of Premixed Flames

An investigation into influence of obstructions on premixed flame propagation has been carried out in a semi-open tube. It is found that there exists flame acceleration and rising overpressure along the path of flame due to obstacles. According to the magnitude of flame speeds, the propagation of flame in the tube can be classified into three regimes: the quenching, the choking and the detonation regimes. In premixed flames near the flammability limits, the flame is observed first to accelerate and then to quench itself after propagating past a certain number of obstacles. In the choking regime, the maximum flame speeds are somewhat below the combustion product sound speeds, and insensitive to the blockage ratio. In the more sensitive mixtures, the transition to detonation (DDT) occurs when the equivalence ratio increases. The transition is not observed for the less sensitive mixtures. The dependence of overpressure on blockage ratio is not monotonous. Furthermore, a numerical study of flame acceleration and overpressure with the unsteady compressible flow model is performed, and the agreement between the simulation and measurements is good.

Quasi-static three-point bending of carbon fiber sandwich beams with square honeycomb cores

Sandwich beams comprising identical face sheets and a square honeycomb core were manufactured from carbon fiber composite sheets. Analytical expressions were derived for four competing collapse mechanisms of simply supported and clamped sandwich beams in three-point bending: core shear, face microbuckling, face wrinkling, and indentation. Selected geometries of sandwich beams were tested to illustrate these collapse modes, with good agreement between analytic predictions and measurements of the failure load. Finite element (FE) simulations of the three-point bending responses of these beams were also conducted by constructing a FE model by laying up unidirectional plies in appropriate orientations. The initiation and growth of damage in the laminates were included in the FE calculations. With this embellishment, the FE model was able to predict the measured load versus displacement response and the failure sequence in each of the composite beams. © 2011 American Society of Mechanical Engineers.

Anchor limited q in flexural mode resonators

This paper reports a preliminary examination of the effect of anchor geometry design on the quality factor of flexural mode resonators operating in vacuum using both FE simulation and measurements of resonator frequency response. Three types of structures have been considered in this study: an elliptical mode ring, a double ended tuning fork, and a doubly-clamped beam. We consider the relative distribution of strain energies in both the resonant structure and the connecting stem, which is indicative of the measured quality factor. The measured quality factors of the different structures are compared against each other, based on which suggestions are proposed for optimizing the anchor limited quality factor (Q) in flexural mode micromechanical resonators. ©2008 IEEE.

Micro-scale Mechanics of the Surface-Nanocrystalline Al-Alloy Material

Based on the microscopic observations and measurements, the mechanical behavior of the surface-nanocrystallized Al-alloy material at microscale is investigated experimentally and theoretically. In the experimental research, the compressive stress-strain curves and the hardness depth curves are measured. In the theoretical simulation, based on the material microstructure characteristics and the experimental features of the compression and indentation, the microstructure cell models are developed and the strain gradient plasticity theory is adopted. The material compressive stress-strain curves and the hardness depth curves-are predicted and simulated. Through comparison of the experimental results with the simulation results, the material and model parameters are determined.

Magnetostatic configuration of a confined magnetic-flux tube

In this paper an isolated magnetic flux tube confined in stratified atmosphere is studied for slender and axisymmetric model. The functions of the pressure, density, and temperature are expanded as a Taylor series of magnetic surface function psi. Several models of an isolated magnetic flux tube confined in a stratified atmosphere are constructed, and the external pressure of the stratified atmosphere decreases reasonably with increasing height. The distribution of thermal dynamic quantities and the magnetic pressure in the flux tube are also obtained.

Magnetostatic equilibrium of isolated magnetic-flux tube

In the present paper, an isolated axisymmetric flux tube is discussed for slender magnetic configuration. The magnetostatic model and the stratified atmospheric model are applied, respectively, to the regions inside and outside the flux tube. The problem is described mathematically by the nonlinear partial differential equations under the nonlinear boundary condition at the free boundary of flux tube. According to the approximation of a small expansive angle, the solutions of series expressions are obtained formally. The model of polytropic plasma is discussed in detail especially. The results show the distributions of thermodynamic quantities and magnetic field extending from the high β region to the low β region, and the flux tube may be either divergent or convergent according to the pressure difference outside and inside the flux tube.

Review of river fisheries valuation in tropical Asia

This study attempts to estimate the economic value of riverine fisheries in tropical Asia and quantify the economic impacts of any changes to the environment that affects rivers and hence fisheries. The value of riverine fisheries has been considered in the following two ways: firstly, through a compilation and summary of the results of existing studies on this topic; secondly, by estimating the direct use value of riverine and floodplain fishing by country using quantities and freshwater fish prices derived from various sources. Furthermore, a review of the characteristics of the fisheries is presented. These fisheries have been shown to be valuable (i.e., economically or socially important) in at least two specific ways: as a generator of commercially marketable output, and as a source of income and employment in relatively impoverished communities.

Benthic sampling program in Biscayne Bay, 1981-1982

The Biscayne Bay Benthic Sampling Program was divided into two phases. In Phase I, sixty sampling stations were established in Biscayne Bay (including Dumfoundling Bay and Card Sound) representing diverse habitats. The stations were visited in the wet season (late fall of 1981) and in the dry season (midwinter of 1982). At each station certain abiotic conditions were measured or estimated. These included depth, sources of freshwater inflow and pollution, bottom characteristics, current direction and speed, surface and bottom temperature, salinity and dissolved oxygen, and water clarity was estimated with a secchi disk. Seagrass blades and macroalgae were counted in a 0.1-m2 grid placed so as to best represent the bottom community within a 50-foot radius. Underwater 35-mm photographs were made of the bottom using flash apparatus. Benthic samples were collected using a petite Ponar dredge. These samples were washed through a 5-mm mesh screen, fixed in formalin in the field, and later sorted and identified by experts to a pre-agreed taxonomic level. During the wet season sampling period, a nonquantitative one-meter wide trawl was made of the epibenthic community. These samples were also washed, fixed, sorted and identified. During the dry season sampling period, sediment cores were collected at each station not located on bare rock. These cores were analyzed for sediment size and organic composition by personnel of the University of Miami. Data resulting from the sampling were entered into a computer. These data were subjected to cluster analyses, Shannon-Weaver diversity analysis, multiple regression analysis of variance and covariance, and factor analysis. In Phase II of the program, fifteen stations were selected from among the sixty of Phase I. These stations were sampled quarterly. At each quarter, five Petite Ponar dredge samples were collected from each station. As in Phase I, observations and measurements, including seagrass blade counts, were made at each station. In Phase II, polychaete specimens collected were given to a separate contractor for analysis to the species level. These analyses included mean, standard deviation, coefficient of dispersion, percent of total, and numeric rank for each organism in each station as well as number of species, Shannon-Weaver taxa diversity, and dominance (the compliment of Simpson's Index) for each station. Multiple regression analysis of variance and covariance, and factor analysis were applied to the data to determine effect of abiotic factors measured at each station. (PDF contains 96 pages)

Diel differences in catches of Western Baltic Spring Spawning Herring Larvae (Clupea harengus)

Comparative night and day catches of herring larvae were taken during the Rügen-Herring-Larval-Survey (RHLS) in 2007 and 2008 in the Greifswalder Bodden which is the main spawning area of the Western Baltic Spring Spawning Herring. The quantities and the size composition of larvae caught during night and day were examined. During night more larvae were caught compared to the samples taken at daytime, especially with larvae larger than 25 mm. This indicates avoidance reactions, which increase with the developmental stage of the larvae. The differences of the night and day catches are relatively constant until a length of about 25 mm, thus the night/day effect does not influence estimations concerning larvae smaller than 25 mm (e.g. N20 index). There might be an impact on estimations for larger larvae due to the night/day effect. For further research other aspects like cloud coverage at night, phase of the moon, underwater visibility and turbidity should be taken into account. These aspects might influence the avoidance reactions.

Aktivitäten des nationalen Fischereidatenerhebungsprogramms im Jahr 2004

Based on the EU Regulation 1543/2000 for the improvement of quantity and quality of fishery data the Federal Ministry for Consumer Protection, Food and Agriculture has initiated a national data collection programme, executed by three institutions, Federal Research Centre for Fisheries (BFAFi), Federal Agency for Ariculture and Food and the Federal Research Centre Agriculture, co-ordinated by BFAFi. In 2004 samples have been taken from 943 hauls during 29 commercial fishing trips; 357 000 fish have been measured. From 2002 to 2004 the number of length and weight and measurements, and age determinations could increased by 32, 65 and 156 % resp. Pilot inquiries have been carried out to prepare also the collection of economical date of fishing vessels and of fish processing plants from 2006.

Gegenüberstellung von mathematisch-physikalischer Modellierung und Messungen an geschleppten fischereitechnischen Systemen

When drafting a new model of a towed technical system for fisheries (trawl, towed TV gear or similar), and also when measuring an existing and already tested system it is not easy to foresee of practical behaviour, which depends of various parameters. The measuring programme for recording all data needs a lot of time and money, and also has some limitations. Therefore we developed for such systems mathematical-physical models, which allow a complex calculation. Their real value, however, results only from practical verification. During the cruise no. 222 of “Walther Herwig III” in November 2000 comparative investigations for 2concrete systems were carried out. This was done in cooperation with the University in Rostock, where such models are being developed and computerized. One of the systems mesasured was a pelagic herring trawl and the other one the towed TV gear for underwater observations of the Institute for Fishery Technology and Fish Quality. The correspondence between model calculation and measurements was very high for both systems.

Fishermen cooperatives in the Green Revolution Programme

The aim of this study was to examine areas in which fishermen cooperatives can become involved and then suggest operational guidelines in order to increase fishermen income and also to make the Green Revolution Programme a success through increased production of fish. The paper enumerated different areas in which fishermen cooperatives can participate. These include: thrift and credits, thrift and savings, consumers and building cooperative societies. It is the belief of the author that the expansion of fishermen cooperatives into the areas mentioned in this paper can enable members to process and market their products more economically, buy supplies and equipment in large quantities and obtain lower cost credit