High sensitivity analysis of BRAF mutations in neoplastic and non-neoplastic thyroid lesions

The clonal distribution of BRAFV600E in papillary thyroid carcinoma (PTC) has been recently debated. No information is currently available about precursor lesions of PTCs. My first aim was to establish whether the BRAFV600E mutation occurs as a subclonal event in PTCs. My second aim was to screen BRAF mutations in histologically benign tissue of cases with BRAFV600E or BRAFwt PTCs in order to identify putative precursor lesions of PTCs. Highly sensitive semi-quantitative methods were used: Allele Specific LNA quantitative PCR (ASLNAqPCR) and 454 Next-Generation Sequencing (NGS). For the first aim 155 consecutive formalin-fixed and paraffin-embedded (FFPE) specimens of PTCs were analyzed. The percentage of mutated cells obtained was normalized to the estimated number of neoplastic cells. Three groups of tumors were identified: a first had a percentage of BRAF mutated neoplastic cells > 80%; a second group showed a number of BRAF mutated neoplastic cells < 30%; a third group had a distribution of BRAFV600E between 30-80%. The large presence of BRAFV600E mutated neoplastic cell sub-populations suggests that BRAFV600E may be acquired early during tumorigenesis: therefore, BRAFV600E can be heterogeneously distributed in PTC. For the second aim, two groups were studied: one consisted of 20 cases with BRAFV600E mutated PTC, the other of 9 BRAFwt PTCs. Seventy-five and 23 histologically benign FFPE thyroid specimens were analyzed from the BRAFV600E mutated and BRAFwt PTC groups, respectively. The screening of BRAF mutations identified BRAFV600E in “atypical” cell foci from both groups of patients. “Unusual” BRAF substitutions were observed in histologically benign thyroid associated with BRAFV600E PTCs. These mutations were very uncommon in the group with BRAFwt PTCs and in BRAFV600E PTCs. Therefore, lesions carrying BRAF mutations may represent “abortive” attempts at cancer development: only BRAFV600E boosts neoplastic transformation to PTC. BRAFV600E mutated “atypical foci” may represent precursor lesions of BRAFV600E mutated PTCs.

Bundling Strategies When Products Are Vertically Differentiated and Capacities Are Limited

We consider a seller who owns two capacity-constrained resources and markets two products (components) corresponding to these resources as well as a bundle comprising the two components. In an environment where all customers agree that one of the two components is of higher quality than the other and that the bundle is of the highest quality, we derive the seller's optimal bundling strategy. We demonstrate that the optimal solution depends on the absolute and relative availabilities of the two resources as well as upon the extent of subadditivity of the quality of the products. The possible strategies that can arise as equilibrium behavior include a pure components strategy, a partial- or full-spectrum mixed bundling strategy, and a pure bundling strategy, where the latter strategy is optimal when capacities are unconstrained. These conclusions are contrary to findings in the prior literature on bundling that demonstrated the unambiguous dominance of the full-spectrum mixed bundling strategy. Thus, our work expands the frontier of bundling to an environment with vertically differentiated components and limited resources. We also explore how the bundling strategies change as we introduce an element of horizontal differentiation wherein different types of customers value the available components differently.

Hierarchical Approach for Survivable Network Design

A central design challenge facing network planners is how to select a cost-effective network configuration that can provide uninterrupted service despite edge failures. In this paper, we study the Survivable Network Design (SND) problem, a core model underlying the design of such resilient networks that incorporates complex cost and connectivity trade-offs. Given an undirected graph with specified edge costs and (integer) connectivity requirements between pairs of nodes, the SND problem seeks the minimum cost set of edges that interconnects each node pair with at least as many edge-disjoint paths as the connectivity requirement of the nodes. We develop a hierarchical approach for solving the problem that integrates ideas from decomposition, tabu search, randomization, and optimization. The approach decomposes the SND problem into two subproblems, Backbone design and Access design, and uses an iterative multi-stage method for solving the SND problem in a hierarchical fashion. Since both subproblems are NP-hard, we develop effective optimization-based tabu search strategies that balance intensification and diversification to identify near-optimal solutions. To initiate this method, we develop two heuristic procedures that can yield good starting points. We test the combined approach on large-scale SND instances, and empirically assess the quality of the solutions vis-à-vis optimal values or lower bounds. On average, our hierarchical solution approach generates solutions within 2.7% of optimality even for very large problems (that cannot be solved using exact methods), and our results demonstrate that the performance of the method is robust for a variety of problems with different size and connectivity characteristics.

New Results Concerning Probability Distributions with Increasing Generalized Failure Rates

The generalized failure rate of a continuous random variable has demonstrable importance in operations management. If the valuation distribution of a product has an increasing generalized failure rate (that is, the distribution is IGFR), then the associated revenue function is unimodal, and when the generalized failure rate is strictly increasing, the global maximum is uniquely specified. The assumption that the distribution is IGFR is thus useful and frequently held in recent pricing, revenue, and supply chain management literature. This note contributes to the IGFR literature in several ways. First, it investigates the prevalence of the IGFR property for the left and right truncations of valuation distributions. Second, we extend the IGFR notion to discrete distributions and contrast it with the continuous distribution case. The note also addresses two errors in the previous IGFR literature. Finally, for future reference, we analyze all common (continuous and discrete) distributions for the prevalence of the IGFR property, and derive and tabulate their generalized failure rates.

Anticancer drug vinblastine sulphate induces transient morphological changes on the olfactory mucosa of the rabbit

Vinblastine sulphate (VBS) is an anticancer drug that acts by disrupting microtubule dynamics of highly mitotic tissue cells. The consequences of VBS on the olfactory mucosa (OM), a tissue with high mitotic numbers, are not clearly understood. We used qualitative and quantitative methods to determine the structural changes that may be produced on the rabbit OM by VBS. Following a single dose (0.31 mg/kg) of this drug, the structure of the mucosa was greatly altered on the first 3-5 days. The alteration was characterized by disarrangement of the normal layering of nuclei of the epithelia, degeneration of axonal bundles, occurrence of blood vessels within the bundles, localized death of cells of Bowman's glands and glandular degeneration. Surprisingly on or after day 7 and progressively to day 15 post-exposure, the OM was observed to regenerate and acquire normal morphology, and the vessels disappeared from the bundles. Relative to control values, bundle diameters, olfactory cell densities and cilia numbers decreased to as low as 53.1, 75.2 and 71.4%, respectively, on day 5. Volume density for the bundles, which was 28.6% in controls, decreased to a lowest value of 16.8% on day 5. In contrast, the volume density for the blood vessels was significantly lower in controls (19.9%) than in treated animals at day 2 (25.8%), day 3 (34.3%) and day 5 (31.5%). These findings suggest that the changes induced on the rabbit OM by VBS are transient and that regenerative recovery leads to the restoration of the normal structure of the mucosa.

Ligation dependent allele specific quantification (LASQ) of CFTR cDNA on the LightCycler using MLPA hybridization probes

BACKGROUND: As for Cystic Fibrosis (CF) and many other hereditary diseases there is still a lack in understanding the relationship between genetic (e.g. allelic) and phenotypic diversity. Therefore methods which allow fine quantification of allelic proportions of mRNA transcripts are of high importance. METHODS: We used either genomic DNA (gDNA) or total RNA extracted from nasal cells as starting nucleic acid template for our assay. The subjects included in this study were 9 CF patients compound heterozygous for the F508del mutation and each one F508del homozygous and one wild type homozygous respectively. We established a novel ligation based quantification method which allows fine quantification of the allelic proportions of ss and ds CFTR cDNA. To verify reliability and accuracy of this novel assay we compared it with semiquantitative fluorescent PCR (SQF-PCR). RESULTS: We established a novel assay for allele specific quantification of gene expression which combines the benefits of the specificity of the ligation reaction and the accuracy of quantitative real-time PCR. The comparison with SQF-PCR clearly demonstrates that LASQ allows fine quantification of allelic proportions. CONCLUSION: This assay represents an alternative to other fine quantitative methods such as ARMS PCR and Pyrosequencing.

Rural water system sustainability : a case study of community-managed water systems in Saramaka communities

Worldwide, rural populations are far less likely to have access to clean drinking water than are urban ones. In many developing countries, the current approach to rural water supply uses a model of demand-driven, community-managed water systems. In Suriname, South America rural populations have limited access to improved water supplies; community-managed water supply systems have been installed in several rural communities by nongovernmental organizations as part of the solution. To date, there has been no review of the performance of these water supply systems. This report presents the results of an investigation of three rural water supply systems constructed in Saramaka villages in the interior of Suriname. The investigation used a combination of qualitative and quantitative methods, coupled with ethnographic information, to construct a comprehensive overview of these water systems. This overview includes the water use of the communities, the current status of the water supply systems, histories and sustainability of the water supply projects, technical reviews, and community perceptions. From this overview, factors important to the sustainability of these water systems were identified. Community water supply systems are engineered solutions that operate through social cooperation. The results from this investigation show that technical adequacy is the first and most critical factor for long-term sustainability of a water system. It also shows that technical adequacy is dependent on the appropriateness of the engineering design for the social, cultural, and natural setting in which it takes place. The complex relationships between technical adequacy, community support, and the involvement of women play important roles in the success of water supply projects. Addressing these factors during the project process and taking advantage of alternative water resources may increase the supply of improved drinking water to rural communities.

A STUDY ON THE FEASIBILITY OF UNIVERSAL CHIP CONTROL IN MACHINING

A novel solution to the long standing issue of chip entanglement and breakage in metal cutting is presented in this dissertation. Through this work, an attempt is made to achieve universal chip control in machining by using chip guidance and subsequent breakage by backward bending (tensile loading of the chip's rough top surface) to effectively control long continuous chips into small segments. One big limitation of using chip breaker geometries in disposable carbide inserts is that the application range is limited to a narrow band depending on cutting conditions. Even within a recommended operating range, chip breakers do not function effectively as designed due to the inherent variations of the cutting process. Moreover, for a particular process, matching the chip breaker geometry with the right cutting conditions to achieve effective chip control is a very iterative process. The existence of a large variety of proprietary chip breaker designs further exacerbates the problem of easily implementing a robust and comprehensive chip control technique. To address the need for a robust and universal chip control technique, a new method is proposed in this work. By using a single tool top form geometry coupled with a tooling system for inducing chip breaking by backward bending, the proposed method achieves comprehensive chip control over a wide range of cutting conditions. A geometry based model is developed to predict a variable edge inclination angle that guides the chip flow to a predetermined target location. Chip kinematics for the new tool geometry is examined via photographic evidence from experimental cutting trials. Both qualitative and quantitative methods are used to characterize the chip kinematics. Results from the chip characterization studies indicate that the chip flow and final form show a remarkable consistency across multiple levels of workpiece and tool configurations as well as cutting conditions. A new tooling system is then designed to comprehensively break the chip by backward bending. Test results with the new tooling system prove that by utilizing the chip guidance and backward bending mechanism, long continuous chips can be more consistently broken into smaller segments that are generally deemed acceptable or good chips. It is found that the proposed tool can be applied effectively over a wider range of cutting conditions than present chip breakers thus taking possibly the first step towards achieving universal chip control in machining.

Improving follow-up of abnormal cancer screens using electronic health records: trust but verify test result communication.

BACKGROUND: Early detection of colorectal cancer through timely follow-up of positive Fecal Occult Blood Tests (FOBTs) remains a challenge. In our previous work, we found 40% of positive FOBT results eligible for colonoscopy had no documented response by a treating clinician at two weeks despite procedures for electronic result notification. We determined if technical and/or workflow-related aspects of automated communication in the electronic health record could lead to the lack of response. METHODS: Using both qualitative and quantitative methods, we evaluated positive FOBT communication in the electronic health record of a large, urban facility between May 2008 and March 2009. We identified the source of test result communication breakdown, and developed an intervention to fix the problem. Explicit medical record reviews measured timely follow-up (defined as response within 30 days of positive FOBT) pre- and post-intervention. RESULTS: Data from 11 interviews and tracking information from 490 FOBT alerts revealed that the software intended to alert primary care practitioners (PCPs) of positive FOBT results was not configured correctly and over a third of positive FOBTs were not transmitted to PCPs. Upon correction of the technical problem, lack of timely follow-up decreased immediately from 29.9% to 5.4% (p<0.01) and was sustained at month 4 following the intervention. CONCLUSION: Electronic communication of positive FOBT results should be monitored to avoid limiting colorectal cancer screening benefits. Robust quality assurance and oversight systems are needed to achieve this. Our methods may be useful for others seeking to improve follow-up of FOBTs in their systems.

Internet-based exercises and mini-exams for production and operations management

The purpose of the internet-based teachware mySCM is that students of economics, informatics and industrial engineering get familiar with quantitative methods for supply chain management. Input-output-relationships of various optimization methods can be detected by sampling input values, parameters, and alternative methods for the same problem. Students can gain extra benefits by passing so-called mini-exams that motivate active learning. mySCM can be used for free, round-the-clock, and any place where access to the Internet is available.

The role of substance abuse treatment in preventing human immunodeficiency virus transmission among injecting drug users

This exploratory study assesses the utility of substance abuse treatment as a strategy for preventing human immunodeficiency virus (HIV) transmission among injecting drug users (IDUs). Data analyzed in this study were collected in San Antonio, TX, 1989 through 1995 using both qualitative and quantitative methods. Qualitative data included ethnographic interviews with 234 active IDUs; quantitative data included baseline risk assessments and HIV screening plus interviews follow-up interviews administered approximately six months later to 823 IDUs participating in a Federally-funded AIDS community outreach demonstration project.^ Findings that have particularly important implications for substance abuse treatment as an HIV prevention strategy for IDUs are listed below. (1) IDUs who wanted treatment were significantly more likely to be daily heroin users. (2) IDUs who want treatment were significantly more likely to have been to treatment previously. (3) IDUs who wanted treatment at baseline reported significantly higher levels of HIV risk than IDUs who did not want treatment. (4) IDUs who went to treatment between their baseline and follow-up interviews reported significantly higher levels of HIV risk at baseline than IDUs who did not go to treatment. (5) IDUs who went to treatment between their baseline and follow-up interviews reported significantly greater decreases in injection-related HIV risk behaviors. (6) IDUs who went to treatment reported significantly greater decreases in sexual HIV risk behaviors than IDUs who did not go to treatment.^ This study also noted a number of factors that may limit the effectiveness of substance abuse treatment in reducing HIV risk among IDUs. Findings suggest that the impact of methadone maintenance on HIV risk behaviors among opioid dependent IDUs may be limited by the negative manner in which it is perceived by IDUs as well as other elements of society. One consequence of the negative perception of methadone maintenance held by many elements of society may be an unwillingness to provide public funding for an adequate number of methadone maintenance slots. Thus many IDUs who would be willing to enter methadone maintenance are unable to enter it and many IDUs who do enter it are forced to drop out prematurely. ^

More volunteers in football clubs. An evaluation of a method to increase the number of volunteers

An increasing number of clubs experience difficulties in recruiting and retaining sufficient numbers of volunteers to manage and staff their clubs (Lamprecht, Fischer, & Stamm, 2012). In order to facilitate volunteer recruitment, sport clubs need a specific strategy to recruit and retain volunteers for both formal positions and ad hoc tasks. Therefore, the intervention “More Volunteers in Football Clubs” was designed and its impact was evaluated in detail. The question this evaluation research wants to address is: Can football clubs recruit and retain volunteers successfully by implementing the intervention “More Volunteers in Football Clubs”? The designed intervention is based on the different expectations and needs of volunteers, as well as non-profit human resource management and organisational development management, with a strong emphasis on club-specific counseling and support. Task forces of the twelve participating football clubs attended four workshops in which they received tailor made counseling to reach the desired number of volunteers. The intervention has been implemented and its effectiveness tested in cooperation with the Swiss Football Federation with twelve Swiss football clubs following a pretest, intervention, posttest design Data have been gathered and analysed using a combination of qualitative and quantitative methods. Outcome measurements are: volunteer rate, number of recruited volunteers, number of filled volunteer positions and volunteer satisfaction. Four months after the intervention all clubs that completed the proposed intervention were successful in recruiting the desired number of volunteers. Further, all participating clubs found the intervention helpful and would recommend other clubs to participate as well. With the development of this practical intervention a solution for football clubs is provided to overcome the difficulties in recruiting and retaining sufficient numbers of volunteers. Lamprecht, M., Fischer, A., & Stamm, H.-P. (2012). Sportvereine in der Schweiz. Strukturen, Leistungen, Herausforderungen. Zürich, Switzerland: Seismo.