The CND-Goiaba 1.0 software for nutritional diagnosis of guava (Psidium guajava L.) 'Paluma', in Brazil

Computer programs enable the transformation of raw data into useful information for decision making in many fields, including agriculture. Various programs have been developed to assist farmers to make better decisions about crop management practices and plant nutrition parameters. This article introduces the CND-Goiaba 1.0 software (C Sharp) and its use as a tool to perform the mathematical calculations involved in determining the compositional nutrient diagnosis (CND) indexes for the guava tree. This program was developed in Brazil, the world's leading producer of red guavas. A database was created based on 205 leaf samples collected in commercial plots (sampling units) of cultivated 'Paluma' guava trees (Psidium guajava L.) with ages between 5 and 20 years, during the 2009-2010 and 2010-2011 growing seasons. The production data were normally distributed according to the Shapiro-Wilk test (W=0.988; p=0.11). The software made it possible to diagnose that 63% of the orchards evaluated needed to improve the nutritional status of their trees. The CND method showed severe nutritional imbalances in Mg and Zn in these orchards. © ISHS.

Risk management in software projects through Knowledge Management techniques: Cases in Brazilian Incubated Technology-Based Firms

In businesses such as the software industry, which uses knowledge as a resource, activities are knowledge intensive, requiring constant adoption of new technologies and practices. Another feature of this environment is that the industry is particularly susceptible to failure; with this in mind, the objective of this research is to analyze the integration of Knowledge Management techniques into the activity of risk management as it applies to software development projects of micro and small Brazilian incubated technology-based firms. Research methods chosen were the Multiple Case Study. The main risk factor for managers and developers is that scope or goals are often unclear or misinterpreted. For risk management, firms have found that Knowledge Management techniques of conversion combination would be the most applicable for use; however, those most commonly used refer to the conversion mode as internalization.. © 2013 Elsevier Ltd. APM and IPMA.

Argentina: recent dynamics in the software and IT services industry

Includes bibliography.

Projeto Açai: uma contribuição à formação dos professores indígenas no estado de Rondônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preservação digital na gestão da informação: um modelo processual para as instituições de ensino superior

Pós-graduação em Ciência da Informação - FFC

Metodologia para aplicação de reuso e reengenharia nos softwares de aquisição e redução de dados de um túnel de vento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem e simulação de sistemas de geração de energia para o setor de petróleo e gás

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

PGCP - Plataforma para Gerenciamento Colaborativo de Projetos

Collaborative Systems are designed to support individuals in order to solve a problem together, or cooperatively (or collaboratively). Such systems have the advantage of not requiring the presence in the same location of the participants. The basis of any Collaborative System is communication, where users interact with each other in order to exchange information. Communication among individuals is accomplished through collaborative tools such as chat, email, document repository, etc.. Using these tools, companies can reduce operational costs, saving on travel and accommodation of its employees to attend meetings. The project members only need a computer with internet access to use collaborative tools. Project management is essential to the quality of the nal product. To perform a proper management, methodologies must be applied using methods, tools and procedures. There are some phases that are considered generic for all software process models, they are: de nition, development, maintenance and activity to support the software process. In this paper is described a platform for project management using the concepts and features of Collaborative Systems. The goal of this platform is to unify various collaborative tools (such as chat and document repository) in a project management system. Using the system, it becomes possible to manage projects, and the ability to maintain an active constant communication between members of each project

Proposta de um processo de categorização de fornecedores para a execução de projetos

Nowadays, in business environment, organizations seek to differentiate through special programs and plans, taking the concepts of sustainability, performance and benefits generated for society. Based in this competitive environment, as companies depend on the use of subcontractors to perform services for your different customers, the work performed by them is directly related to the vision created by the final customer’s vision of the company responsible for the project. Considering that the supplier hired to execute the project does not share the strategic concepts related to the level of services to be offered to the final customers, thus creating the need to develop methods that enable the alignment between the project owner, responsible for preparing the executive project, and the supplier, responsible for the execution of the work. Tangent to this need, it was necessary to create a method of evaluation and categorization for suppliers to hired for the projects. As a result it has been proposed a process of categorization of suppliers, through the restriction of possible companies to be hired for a project designed to promote alignment between strategies and continuous improvement of the solutions offered to the market

O Serviço Social e a avaliação de impacto na gestão de programas e projetos empresariais

Pós-graduação em Serviço Social - FCHS

Aplicação e análise da utilização do software Eberick em um projeto residencial popular

Due to new technologies in civil engineering and the competition of the market, the demand for computer programs for the elaboration of structural projects of reinforced concrete is raising in a quick and efficient manner. This paper presents a study based on Eberick, a structural calculation software, and this software was applied to a low cost residence project. By performing structural calculation manually, it is possible to compare and analyze the criteria that Eberick uses for the design and detailing of structural elements like columns, beams and slabs. As the software functionality becomes clear, the engineer will use it careful and safely, exploring all of its resources and advantages

Pontes de madeira para pequenos vãos para situações emergenciais

In Brazil there are many cases of cities that suffer from flooding. It often destroys much of the structure of the city, and isolates many families. Relying on emergency measures for these cases and similar cases is of utmost importance. This paper proposes the development of a project of a timber bridge that can be used in emergency situations such as occurs in situations of floods and especially on side roads. It is considered one type of structural bridge which has, among other characteristics, an easy transportation and assembly of the elements. The development is carried out, at this early stage of the project, only about the verification and sizing of structural elements of the superstructure of the bridge. For this purpose, it relies on computer programs, and fundamentally on PCFrame Visual Taco. The first allows you to model the structure and determine the efforts of calculating the elements, and the second one assists at the scaling and the verifications in accordance with the Brazilian technical standards for timber bridges. The wood used in the project comes from the tree Eucalyptus saligna, which is easy to acquaint and manipulate and comes from the region Vale do Paraíba. The bridge in this case of application should have the characteristics mentioned below: short execution time, simplicity of structure and an assembly of a relatively low cost

North Central Risk Management Education Center

The North Central Risk Management Education Center has been providing program coordination for extension risk management education in the North Central Region since 2001. During this time, nearly five million dollars has been awarded to public, private and non-profit entities to carry out producer-focused, results-based risk management education programs. The North Central Region includes Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, Ohio, North Dakota, South Dakota and Wisconsin.

SED Stroop Effect Detector prototype

[ES] El Detector de Efectos Stroop (SED - Stroop Effect Detector), es una herramienta informática de asistencia, desarrollada a través del programa de investigación de Desarrollo Tecnológico Social de la Universidad de Las Palmas de Gran Canaria, que ayuda a profesionales del sector neuropsicológico a identificar problemas en la corteza orbitofrontal de un individuo, usándose para ello la técnica ideada por Schenker en 1998. Como base metodológica, se han utilizado los conocimientos adquiridos en las diferentes materias de la adaptación al grado en Ingeniería Informática como Gestión del Software, Arquitectura del Software y Desarrollo de Interfaces de Usuario así como conocimiento adquirido con anterioridad en asignaturas de Programación e Ingeniería del Software I y II. Como para realizar este proyecto sólo el conocimiento informático no era suficiente, he realizado una labor de investigación acerca del problema, teniendo que recopilar información de otros documentos científicos que abordan el tema, consultas a profesionales del sector como son el Doctor Don Ayoze Nauzet González Hernández, neurólogo del hospital Doctor Negrín de Las Palmas de Gran Canaria y el psicólogo Don José Manuel Rodríguez Pellejero que habló de este problema en clase del máster de Formación del Profesorado y que actualmente estoy cursando. Este trabajo presenta el test de Stroop con las dos versiones de Schenker: RCN (Reading Color Names) y NCW (Naming Colored Words). Como norma general, ambas pruebas presentan ante los sujetos estudios palabras (nombres de colores) escritas con la tinta de colores diferentes. De esta forma, el RCN consiste en leer la palabra escrita omitiendo la tonalidad de su fuente e intentando que no nos influya. Por el contrario, el NCW requiere enunciar el nombre del color de la tinta con la que está escrita la palabra sin que nos influya que ésta última sea el nombre de un color.

Zweischleifenkorrekturen zum leptonischen Zerfall des Z-Bosons

Im Rahmen der vorliegenden Dissertation wurde, basierend auf der Parallel-/Orthogonalraum-Methode, eine neue Methode zur Berechnung von allgemeinen massiven Zweischleifen-Dreipunkt-Tensorintegralen mit planarer und gedrehter reduzierter planarer Topologie entwickelt. Die Ausarbeitung und Implementation einer Tensorreduktion fuer Integrale, welche eine allgemeine Tensorstruktur im Minkowski-Raum besitzen koennen, wurde durchgefuehrt. Die Entwicklung und Implementation eines Algorithmus zur semi-analytischen Berechnung der schwierigsten Integrale, die nach der Tensorreduktion verbleiben, konnte vollendet werden. (Fuer die anderen Basisintegrale koennen wohlbekannte Methoden verwendet werden.) Die Implementation ist bezueglich der UV-endlichen Anteile der Masterintegrale, die auch nach Tensorreduktion noch die zuvor erwaehnten Topologien besitzen, abgeschlossen. Die numerischen Integrationen haben sich als stabil erwiesen. Fuer die verbleibenden Teile des Projektes koennen wohlbekannte Methoden verwendet werden. In weiten Teilen muessen lediglich noch Links zu existierenden Programmen geschrieben werden. Fuer diejenigen wenigen verbleibenden speziellen Topologien, welche noch zu implementieren sind, sind (wohlbekannte) Methoden zu implementieren. Die Computerprogramme, die im Rahmen dieses Projektes entstanden, werden auch fuer allgemeinere Prozesse in das xloops-Projekt einfliessen. Deswegen wurde sie soweit moeglich fuer allgemeine Prozesse entwickelt und implementiert. Der oben erwaehnte Algorithmus wurde insbesondere fuer die Evaluation der fermionischen NNLO-Korrekturen zum leptonischen schwachen Mischungswinkel sowie zu aehnlichen Prozessen entwickelt. Im Rahmen der vorliegenden Dissertation wurde ein Grossteil der fuer die fermionischen NNLO-Korrekturen zu den effektiven Kopplungskonstanten des Z-Zerfalls (und damit fuer den schachen Mischungswinkel) notwendigen Arbeit durchgefuehrt.