Methods of energy recovery in the iron and steel industry: evalution of new possibilities and design studies for slab cooling

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT

Computer integrated manufacturing (CIM) and the principle of business control

In response to the increasing international competitiveness, many manufacturing businesses are rethinking their management strategies and philosophies towards achieving a computer integrated environment. The explosive growth in Advanced Manufacturing Technology (AMI) has resulted in the formation of functional "Islands of Automation" such as Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Computer Aided Process Planning (CAPP) and Manufacturing Resources Planning (MRPII). This has resulted in an environment which has focussed areas of excellence and poor overall efficiency, co-ordination and control. The main role of Computer Integrated Manufacturing (CIM) is to integrate these islands of automation and develop a totally integrated and controlled environment. However, the various perceptions of CIM, although developing, remain focussed on a very narrow integration scope and have consequently resulted in mere linked islands of automation with little improvement in overall co-ordination and control. This thesis, that is the research described within, develops and examines a more holistic view of CIM, which is based on the integration of various business elements. One particular business element, namely control, has been shown to have a multi-facetted and underpinning relationship with the CIM philosophy. This relationship impacts various CIM system design aspects including the CIM business analysis and modelling technique, the specification of systems integration requirements, the CIM system architectural form and the degree of business redesign. The research findings show that fundamental changes to CIM system design are required; these are incorporated in a generic CIM design methodology. The affect and influence of this holistic view of CIM on a manufacturing business has been evaluated through various industrial case study applications. Based on the evidence obtained, it has been concluded that this holistic, control based approach to CIM can provide a greatly improved means of achieving a totally integrated and controlled business environment. This generic CIM methodology will therefore make a significant contribution to the planning, modelling, design and development of future CIM systems.

On the utility of alternative amino acid scripts

In this work we propose the hypothesis that replacing the current system of representing the chemical entities known as amino acids using Latin letters with one of several possible alternative symbolic representations will bring significant benefits to the human construction, modification, and analysis of multiple protein sequence alignments. We propose ways in which this might be done without prescribing the choice of actual scripts used. Specifically we propose and explore three ways to encode amino acid texts using novel symbolic alphabets free from precedents. Primary orthographic encoding is the direct substitution of a new alphabet for the standard, Latin-based amino acid code. Secondary encoding imposes static residue groupings onto the orthography of the alphabet by manipulating the shape and/or orientation of amino acid symbols. Tertiary encoding renders each residue as a composite symbol; each such symbol thus representing several alternative amino acid groupings simultaneously. We also propose that the use of a new group-focussed alphabet will free the colouring of amino acid residues often used as a tool to facilitate the representation or construction of multiple alignments for other purposes, possibly to indicate dynamic properties of an alignment such as position-wise residue conservation.

Unilateral versus coordinated effects:comparing the impact on consumer welfare of alternative merger outcomes

The nature of tacitly collusive behaviour often makes coordination unstable, and this may result in periods of breakdown, during which consumers benet from reduced prices. This is allowed for by adding demand uncertainty to the Compte et al. (2002) model of tacit collusion amongst asymmetric rms. Breakdowns occur when a rm cannot exclude the possibility of a deviation by a rival. It is then possible that an outcome with collusive behaviour, subject to long/frequent break downs, can improve consumer welfare compared to an alternative with sustained unilateral conduct. This is illustrated by re-examining the Nestle/Perrier merger analyzed by Compte et al., but now also taking into account the potential for welfare losses arising from unilateral behaviour.

Unilateral versus coordinated effects:comparing the impact on consumer welfare of alternative merger outcomes

The nature of tacitly collusive behaviour often makes coordination unstable, and this may result in periods of breakdown, during which consumers benefit from reduced prices. This is allowed for by adding demand uncertainty to the Compte et al. (2002) model of tacit collusion amongst asymmetric firms. Breakdowns occur when a firm cannot exclude the possibility of a deviation by a rival. It is then possible that an outcome with collusive behaviour, subject to long/frequent break downs, can improve consumer welfare compared to an alternative with sustained unilateral conduct. This is illustrated by re-examining the Nestle/Perrier merger analyzed by Compte et al., but now also taking into account the potential for welfare losses arising from unilateral behaviour.

Nonlinear limit of alternative method to 2 × 2 MIMO for LTE RoF system

Owing to the limited cell size of eNodeB (eNB), the relay node has emerged as an attractive solution for the long-term evolution (LTE) system. The nonlinear limit of the alternative method to multipleinput and multiple-output (MIMO) based on frequency division multiplexing (FDM) for orthogonal FDM (OFDM) is analysed over varying transmission spans. In this reported work, it is shown that the degradation pattern over the linear, intermixing and nonlinear propagation regions is consistent for the 2 and the 2.6 GHz bands. The proposed bands experienced a linear increase in the error vector magnitude (EVM) for both the linear and the nonlinear regions proportional to the increasing transmission spans. In addition, an optical launch power between -2 and 2 dBm achieved a significantly lower EVM than the LTE limit of 8% for the 10-60 km spans. © The Institution of Engineering and Technology 2014.

The principle of non-refoulement under international law: Its inception and evolution in a nutshell

The article first gives an overview of the formation and the evolution of the principle of non-refoulement under international law. The different meanings of the concept in the asylum and human rights contexts are then discussed and compared, with due regard to the convergences that arose in the course of legal developments. In doing so, this short piece also draws attention to certain controversial issues and blurred lines, which have surfaced through the practical application of the prohibition of refoulement. Identifying the contours of the concept and clarifying its content and its effects may help in appreciating the implications that stem, in the current extraordinary times of migratory movements, from the fundamental humanitarian legal principles of which the imperative of non-refoulement forms part.

Shifting Our Gaze to the Strengths of Alternative Education Students

This study addresses the need for educators to understand what matters for alternative education students. Three male alternative education students were interviewed about their educational memories, realities and aspirations. Results revealed family influences prevailed over inhospitable socioeconomic factors in students’ educational choices. Findings supported recommendations for alternative education teacher development.

The principle of legal certainty as a principle of economic efficiency

Legal certainty, a feature of the rule of law, constitutes a requirement for the operational necessities of market interactions. But, the compatibility of the principle of legal certainty with ideals such as liberalism and free market economy must not lead to the hastened conclusion that therefore the principle of legal certainty would be compatible and tantamount to the principle of economic efficiency. We intend to analyse the efficiency rationale of an important general principle of EU law—the principle of legal certainty. In this paper, we shall assert that not only does the EU legal certainty principle encapsulate an efficiency rationale, but most importantly, it has been interpreted by the ECJ as such. The economic perspective of the principle of legal certainty in the European context has, so far, never been adopted. Hence, we intend to fill in this gap and propose the representation of the principle of legal certainty as a principle of economic efficiency. After having deciphered the principle of legal certainty from a law and economics perspective (1), we shall delve into the jurisprudence of the ECJ so that the judicial reasoning of the Court as this reasoning proves the relevance of the proposed representation (2). Finally, we conclude in light of the findings of this paper (3).

Fixed-boundary constituencies and the principle of equal representation in Ireland

The process of constituency boundary revision in Ireland, designed to satisfy what is perceived as a rigid requirement that a uniform deputy-population ratio be maintained across constituencies, has traditionally consumed a great deal of the time of politicians and officials. For almost two decades after a High Court ruling in 1961, the process was a political one, was highly contentious, and was marked by serious allegations of ministerial gerrymandering. The introduction in 1979 of constituency commissions made up of officials neutralised, for the most part, charges that the system had become too politicised, but it continued the process of micro-management of constituency boundaries. This article suggests that the continuing problems caused by this system – notably, the permanently changing nature of constituency boundaries and resulting difficulties of geographical identification – could be resolved by reversion to the procedure that is normal in proportional representation systems: periodic post-census allocation of seats to constituencies whose boundaries are based on those of recognised local government units and which are stable over time. This reform, replacing the principle of redistricting by the principle of reapportionment, would result in more recognisable constituencies, more predictable boundary trajectories over time, and a more efficient, fairer, and speedier process of revision.

Preliminary Assessment of the Potential Use of Alternative Materials for Concrete Highway Pavement Joints, 1997

The overall objective of the work contained in this paper is to identify background information on the use of load-transfer devices in highway pavement joints and to provide a preliminary assessment of the market potential for use of alternative materials in that capacity. The intent of the authors is to provide a concise compilation of information upon which HITEC personnel may judge whether or not the use of alternative materials for concrete highway pavement joints is worth a more thorough and rigorous evaluation.

U.S. Highway 20 Corridor Development Study - Report C: Final Screening of Alternative Candidate Improvements, 1992

This report briefly compares the alternative improvement options using analyses conducted to date, and is intended to identify the alternatives which should be carried forward into the study's economic evaluation phase.