Avaliação da qualidade do corte florestal com motosserra

Objetivou-se, com esta pesquisa, avaliar a qualidade do corte florestal com motosserra, em propriedades rurais no sul do Espírito Santo, considerando aspectos da qualidade e a perda de madeira retida nas cepas. Foram lançadas parcelas de 250 m², onde foram feitas as observações após o corte com motosserra, avaliando-se a qualidade do corte nos seguintes aspectos: presença de espetos; danos por rachadura; cepas com faixa de ruptura fora do padrão; cepas sem o entalhe direcional e a altura da cepa remanescente, com vistas a mensurar a perda de madeira retida nas cepas. de acordo com os resultados, em média, houve presença de espetos em 21,9% das cepas, de rachaduras em 17,2%, de cepas fora do padrão em 44,6% e de cepas sem entalhe direcional em 34,5% das avaliações. Para verificar a influência da realização do entalhe direcional na altura das cepas, o teste-t, a 5% de probabilidade demonstrou que há contribuição para ocorrer maior altura de cepas, nos casos em que o corte foi feito sem o entalhe direcional. A quantidade de madeira retida nas cepas, acima do máximo recomendado, foi, em média, de 2,43 m³/ha, representando um prejuízo de R$ 172,53/ha. Foi verificada que a perda de madeira remanescente nas cepas de eucalipto foi maior nos locais onde, para a derrubada das árvores, não houve a realização do entalhe direcional. Os itens avaliados demonstraram qualidade irregular, indicando a necessidade de melhoria no corte com motosserras.

Estudo da recidiva da sobremordida relacionada com a curva de Spee, em pacientes Classe II, divisão 1, na fase pós-contenção

INTRODUÇÃO: a estabilidade dos resultados do tratamento ortodôntico é um assunto muito estudado na literatura, sem respostas conclusivas. A sobremordida, ou trespasse vertical, define-se como a relação vertical entre as bordas incisais dos incisivos superiores e inferiores, apresentando-se como um aspecto importante na avaliação dos resultados do tratamento e sua estabilidade. OBJETIVO: este estudo se propôs a avaliar a recidiva da sobremordida e sua relação com a curva de Spee. METODOLOGIA: a amostra (grupo experimental) constituiu-se de 29 pacientes, de ambos os gêneros, apresentando má oclusão de Classe II, divisão 1, e sobremordida mínima de 3,5mm, tratados com extração dos 4 primeiros pré-molares. Este grupo foi comparado a um grupo controle, com oclusão normal. A amostra faz parte do Arquivo da Disciplina de Ortodontia da FOB-USP. Avaliaram-se as telerradiografias em norma lateral e os modelos de estudo do início, final e 5 anos pós-tratamento e, para o grupo controle, as telerradiografias de dois tempos de avaliação, compatível com o tempo de tratamento do grupo experimental. Para comparação intergrupos, utilizou-se o teste t independente e, para comparação intragrupo, os testes ANOVA e Tukey. Para verificar a relação da recidiva da sobremordida com a curva de Spee, utilizou-se o coeficiente de correlação de Pearson. RESULTADOS: pela análise dos resultados obtidos, observou-se que a sobremordida apresentou uma correção significante durante o tratamento, comparando-se ao grupo controle. Porém, apresentou recidiva significante na fase pós-contenção. CONCLUSÃO: a recidiva da sobremordida apresentou uma correlação significante com a curva de Spee na fase pós-contenção.

Nest architecture of the leaf-cutting ant Acromyrmex rugosus rugosus

The prominent nests mounds of many ant species are one of the most obvious signs of their presence, yet the subterranean architecture of nests is often poorly known. The present work aimed to establish the external and internal structure of nests of a species of leaf-cutting ant, Acromyrmex rugosus rugosus, by either marking the interior of nests with talcum powder, or forming casts with cement. Twelve nests were excavated and surveyed, with eight being marked with talcum powder and four cast with cement. The external and internal structure of the nests was highly variable. The largest and smallest nests had mound areas of 9.89 m(2) and 0.01 m(2) respectively. The number of chambers found ranged from I to 26, with maximum dimensions of between 6 and 70 cm. Chambers were found close to the soil surface (6 cm) down to a maximum depth of 3.75 m. In addition to chambers containing fungus garden, some chambers were found to be empty, filled with soil or filled with waste, the first time this has been recorded in a species of Acromyrmex. The nests of A. rugosus rugosus appear to be unusually complex for the genus, containing a diversity of irregular chambers and tunnels.

Avaliação da produção de Pleurotus sajor-caju (Fr.) singer utilizando resíduo do beneficiamento têxtil do algodão como substrato

The experiment was conducted to investigate the viability of the production of the edible fungus Pleurotus sajor-caju (Fr.) Singer in substrates in which main source of carbon was the cotton textille mill waste. Two substrates compositions were tested: C1 (cotton textille mill waste, wheat bran, plaster and limestone) and C2 (cotton textille mill waste, wheat bran, bean straw, plaster and limestone). A DIC experimental design was used, with nine repetitions for treatment and the production data and biological efficiency were analyzed being used the procedure ANOVAG of the statistical package SAEG. The cotton textille mill waste improvement, as the main ingredient of the substrate, was shown efficient for the production of the mushroom P. sajor-caju, presenting satisfactory values of productivity (0,56 and 0,5 kg/kg substratum) and biological efficiency (55,76 and 55,39%), respectively for C1 and C2. These results showed us that cotton textille mill waste, could be recommended as less onerous alternative of commercial substrate for the species Pleurotus sajor-caju.

EFFECTS OF DIETARY-PROTEIN, ANGIOTENSIN-I CONVERTING-ENZYME INHIBITION AND MESANGIAL OVERLOAD ON THE PROGRESSION OF ADRIAMYCIN-INDUCED NEPHROPATHY

Adriamycin, a commonly used antineoplastic antibiotic, induces glomerular lesions in rats, resulting in persistent proteinuria and glomerulosclerosis. We studied the effects of dietary protein and of an angiotensin I converting enzyme inhibitor on the progression of this nephropathy and the evolution of the histological lesions, as well as mesangial macromolecule flow. Adriamycin nephropathy was induced by injecting a single iv dose of adriamycin (3 mg/kg body weight) into the tail vein of male Wistar rats (weight, 180-200 g). In Experiment I animals with adriamycin-induced nephropathy were fed diets containing 6% (Low-Protein Diet Group = LPDG), 20% (Normal-Protein Diet Group = NPDG) and 40% (High-protein Diet Group = HPDG) protein and were observed for 30 weeks. In Experiment II the rats with adriamycin nephropathy were divided into 2 groups: ADR, that received adriamycin alone, and ADR-ENA, that received adriamycin plus enalapril, an angiotensin I converting enzyme inhibitor. The animals were sacrificed after a 24-week observation period. Six hours before sacrifice the animals were injected with I-131-ferritin and the amount of I-131-ferritin in the glomeruli was measured. In Experiment III, renal histology was performed 4, 8 and 16 weeks after adriamycin injection. At the end of Experiment I the tubulointerstitial lesion index was 2 for LPDG, 8 for NPDG, and 7.5 for HPDG (P<0.05); the frequency of glomerulosclerosis was 19 +/- 6.1% in LPDG, 42.6 +/- 6% in NPDG, and 54 +/- 9% in HPDG (P<0.05); and proteinuria was 61.1 +/- 25 mg/24 h in LPDG, 218.7 +/- 27.5 mg/24 h in NPDG, and 324.5 +/- 64.8 mg/24 h in HPDG (P<0.05). In Experiment II, at sacrifice, 24-h proteinuria was 189 +/- 16.1 mg in ADR, and 216 +/- 26.1 mg in ADR-ENA (P>0.05); the tubulointerstitial lesion index was 5 for ADR, and 5 for ADR-ENA (P>0.05); the frequency of glomerulosclerosis was 40 +/- 5.2% in ADR and 44 +/- 6% in ADR-ENA (P>0.05); the amount of I-131-ferritin in the mesangium was 214.26 +/- 22.71 cpm/mg protein in ADR and 253.77 +/- 69.72 cpm/mg protein in ADR-ENA (P>0.05). In Experiment III, sequential histological analysis revealed an acute tubulointerstitial cellular infiltrate at week 4, which was decreased at week 8. Tubular casts and dilatation were first seen at week 8 and increased at week 16 when few glomerular lesions were found. The results suggest that the tubulointerstitial lesions may play a role in the development of glomerulosclerosis in adriamycin-induced nephropathy.

Placentation in cloned cattle: Structure and microvascular architecture

To elucidate the morphological differences between placentas from normal and cloned cattle pregnancies reaching term, the umbilical cord, placentomes and interplacentomal region of the fetal membranes were examined macroscopically as well as by light and scanning electron microscopy. In pregnancies established by somatic nucleus transfer (NT), the umbilical cord and fetal membranes were edematous. Placentomal fusion was common, resulting in increased size and a decreased number of placentomes. Extensive areas of the chorioallantoic membrane were devoid of placentomes. An increased number of functional or accessory microcotyledons (< 1 cm) were present at the maternally oriented surface of fetal membranes. Extensive areas of extravasated maternal blood were present within the placentomes and in the interplacentomal region. The crypts on the caruncular surface were dilated and accommodated complexes of more than one primary villus, as opposed to a single villus in non-cloned placentae. Scanning electron microscopy of blood vessel casts revealed that there was also more than one stem artery per villous tree and that the ramification of the vessels failed to form dense complexes of capillary loops and sinusoidal dilations as in normal pregnancies. At the materno-fetal interface, however, the trophoblast and uterine epithelium had normal histology. In conclusion, the NT placentas had a range of pathomorphological changes; this was likely associated with the poor clinical outcome of NT pregnancies. (c) 2007 Elsevier B.V. All rights reserved.

Vascular organization of the hystricomorph placenta: a comparative study in the Agouti, capybara, guinea pig, paca and rock cavy

The placental vasculature of five hystricomorph rodents was examined by latex injection of the blood vessels, immunohistochemistry and scanning electron microscopy of vessel casts. The pattern of branching of the vessels is described at the level of fine structure. The placenta is divided into lobes separated by interlobular trophoblast. Fetal arteries course through the interlobular areas and give rise to capillaries from which blood drains into veins at the centre of the lobes. Maternal blood reaches the placenta through spiral arteries that pass around the perimeter of the subplacenta. They supply large maternal blood sinuses, lined by trophoblast, which run through the interlobular areas and into the centre of the lobes. Here they supply fine channels that run parallel to the fetal capillaries, so that maternal blood flows from the centre of the lobe to the periphery. This arrangement provides the morphological basis for countercurrent exchange. The maternal channels of the labyrinth drain into spaces formed by the latticework of the interlobular trophoblast and thence through venous lacunae to a basal venous lacunar ring. The subplacenta is supplied by a single fetal artery. The vessels within the subplacenta pursue a tortuous course with dilatations and constrictions as in an endocrine gland. (C) 2003 Elsevier Ltd. All rights reserved.

Resin-based composite reinforced sealant

Purpose: To describe and picture a technique for using a resin-bonded sealant reinforced by inclusion of resin-based composite, before polymerization. Method: Using an extracted mandibular molar, embedded in plaster and isolated with a rubber dam, a step-by-step depiction of the technique is shown. Results: A picture of a six-year-old sealant in a first permanent molar, still in perfect condition, is shown. Conclusion: This technique offers a reliable method for treating pits and fissures.

A variation on split-cast mounting for complete denture construction

dThis article describes a variation of the split-cast mounting technique wherein the border of the definitive cast is wrapped with masking tape to form a container for the dental plaster normally used to affix the cast to the articulator. The entire inferior surface of the cast is coated with a thin film of petroleum jelly, and the cast is mounted in the articulator. After the dental plaster has set, the cast is retained by means of the masking tape. The cast is separated from the dental plaster simply by removing the masking tape.

Ventilation of the giant nests of Atta leaf-cutting ants: does underground circulating air enter the fungus chambers?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Urinary bladder washings in autopsies. A cytopathologic study of 63 cases

The sediment from urinary bladder washings from 63 consecutive autopsies was cytologically studied in order to achieve a better understanding of the changes in urothelial cells collected from hospital populations. The observed alterations were correlated with alterations in the urinary system and with therapy preceding death. The specimens obtained were of good quality. In 39.7% of the cases, the sediment contained giant superficial multinucleated cells. Three of nine cases previously subjected to radiation or chemotherapy showed atypical urothelial cells. In three cases with immunosuppression, there was cytologic evidence of subclinical infection by polyomavirus, and virus particles were identified by electron microscopy of the vesical mucosa. The study of the smear background offered additional information: the sediment contained hyaline or hematic or hyaline-cellular casts in 17.4% of the cases, in all of which there were renal tubulopathies when the kidney sections were studied. The method is useful for a good evaluation of the autopsy as well as for training in urinary cytopathology.

Influência de diferentes agentes de fixação na resistência de união, por tração, de ligas metálicas fixadas à dentina.

They were casted pieces using three kinds of alloy (Ni-Cr, Ag-Sn and Cu-Al) with circular and smooth surface. They were cemented to human teeth, on occlusal surface, grounded at dentin level, through three different materials kind (zinc polycarboxylate cement, glassionomer cement and composite). After 24 hours storing, the samples were subjected to the tensile test. The results showed that the samples cemented with composite and the casts made with Ag-Sn alloy had higher bond strength.

Loss of space and dental arch length after the loss of the lower first primary molar: A longitudinal study

The premature loss of primary teeth may harm the normal occlusal development, although there are debates relating to the necessity of using space maintainer appliances. The aim of the study is to evaluate the changes in the dental arch perimeter and the space reduction after the premature loss of the lower first primary molar in the mixed dentition stage. The sample consists of 4 lower arch plaster models of 31 patients, within the period of pre-extraction, 6, 12 and 18 months after the lower first primary molar extraction. A reduction of space was noted with the cuspid dislocation and the permanent incisors moving toward the space of the extraction site. It was concluded that the lower first molar primary premature loss, during the mixed dentition, implicates an immediate placement of a space maintainer.

Effect of disinfectant agents on dimensional stability of elastomeric impression materials.

STATEMENT OF PROBLEM: Difficulties in sterilizing impressions by traditional methods have led to chemical disinfection as an alternative, and some studies have shown that disinfectants may adversely affect impressions. PURPOSE: This study investigated the effect of disinfection methods on the dimensional stability of 6 elastomeric materials. MATERIAL AND METHODS: Impression materials were submitted to the following treatments: immersion in 5.25% sodium hypochlorite solution for 10 minutes, immersion in 2% glutaraldehyde solution for 30 minutes, and no immersion (control). After treatments, impressions were poured, and respective stone casts were measured with a Nikon Profile projector and compared with the master model. RESULTS: The elastomeric materials had different reproduction capacities, and the disinfecting treatments did not differ from the control.

Effect of microwave treatments on dimensional accuracy of maxillary acrylic resin denture base

Microwave energy has been used as an alternative method for disinfection and sterilization of dental prostheses. This study evaluated the influence of microwave treatment on dimensional accuracy along the posterior palatal border of maxillary acrylic resin denture bases processed by water-bath curing. Thirty maxillary acrylic bases (3-mm-thick) were made on cast models with Clássico acrylic resin using routine technique. After polymerization and cooling, the sets were deflasked and the bases were stored in water for 30 days. Thereafter, the specimens were assigned to 3 groups (n=10), as follows: group I (control) was not submitted to any disinfection cycle; group II was submitted to microwave disinfection for 3 min at 500 W; and in group III microwaving was done for 10 min at 604 W. The acrylic bases were fixed on their respective casts with instant adhesive (Super Bonder®) and the base/cast sets were sectioned transversally in the posterior palatal zone. The existence of gaps between the casts and acrylic bases was assessed using a profile projector at 5 points. No statistically significant differences were observed between the control group and group II. However, group III differed statistically from the others (p<0.05). Treatment in microwave oven at 604 W for 10 min produced the greatest discrepancies in the adaptation of maxillary acrylic resin denture bases to the stone casts.