Effects of residues on the degradation of PHA produced from mixed microbial cultures and processed in extrusion

Thermal degradation upon melting is one of the major drawbacks reported for polyhydroxyalkanoates (PHA). However, the role of residues originating from the fermentation and the extraction steps on the thermal stability of this class of biopolymers still needs to be clarified. In the particular case of PHA produced from mixed microbial cultures (MMC), this topic is even less documented in the literature. Here, two polyhydroxy(butyrate-co-valerate) (PHBV) produced from MMC enriched in PHA accumulating organisms and fed with cheese whey were studied. A micro extrusion line is used to produce filaments and assess the processability and the degradation of processed PHBV. The prototype micro extrusion line allows for studying grams of materials. The two PHBV contain 18 mol% HV. PHBV was recovered with 11 wt% residues, and further submitted to a purification procedure resulting in a second biopolyester containing less than 2 wt% impurities. The thermorheological characterization of the two PHBV is first presented, together with their semicrystalline properties. Then the processing windows of the two biopolyesters are presented. Finally, the properties of extruded filaments are reported and the thermomechanical degradation of PHBV is extensively studied. The structure was assessed by wide angle X-ray diffraction, mechanical and rheological properties are reported, thermal properties are studied with differential scanning calorimetry and thermogravimetric analysis, whereas Fourier Transform Infrared spectroscopy was used to assess the impact of the extrusion on PHBV chemical structure. All results obtained with the two PHBV are compared to assess the effects of residues on both PHBV processability and degradation.

Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

Printed electronics represent an alternative solution for the manufacturing of low-temperature and large area flexible electronics. The use of inkjet printing is showing major advantages when compared to other established printing technologies such as, gravure, screen or offset printing, allowing the reduction of manufacturing costs due to its efficient material usage and the direct-writing approach without requirement of any masks. However, several technological restrictions for printed electronics can hinder its application potential, e.g. the device stability under atmospheric or even more stringent conditions. Here, we study the influence of specific mechanical, chemical, and temperature treatments usually appearing in manufacturing processes for textiles on the electrical performance of all-inkjet-printed organic thin-film transistors (OTFTs). Therefore, OTFTs where manufactured with silver electrodes, a UV curable dielectric, and 6,13-bis(triisopropylsilylethynyl) pentance (TIPS-pentacene) as the active semiconductor layer. All the layers were deposited using inkjet printing. After electrical characterization of the printed OTFTs, a simple encapsulation method was applied followed by the degradation study allowing a comparison of the electrical performance of treated and not treated OTFTs. Industrial calendering, dyeing, washing and stentering were selected as typical textile processes and treatment methods for the printed OTFTs. It is shown that the all-inkjet-printed OTFTs fabricated in this work are functional after their submission to the textiles processes but with degradation in the electrical performance, exhibiting higher degradation in the OTFTs with shorter channel lengths (L=10 μm).

An evaluation of parchments' degradation a hybrid approach

Parchment stands for a multifaceted material made from animal skin, which has been used for centuries as a writing support or as bookbinding. Due to the historic value of objects made of parchment, understanding their degradation and their condition is of utmost importance to archives, libraries and museums, i.e., the assessment of parchment degradation is mandatory, although it is hard to do with traditional methodologies and tools for problem solving. Hence, in this work we will focus on the development of a hybrid decision support system, in terms of its knowledge representation and reasoning procedures, under a formal framework based on Logic Programming, complemented with an approach to computing centered on Artificial Neural Networks, to evaluate Parchment Degradation and the respective Degree-of-Confidence that one has on such a happening.

Study on the degradation of natural fiber geotextiles

Current societal challenges increasingly demand the need to seek for efficient and sustainable solutions to daily problems. Construction, as a result of its activity, is one of the main responsible industry for the exploitation of resources and greenhouse gas emissions. In this way, several research works are being undertaken to change some of the current practices. This paper presents the work being done at University of Minho to study de degradation of natural fibers when used as a sustainable solution for soil reinforcement. Jute and sisal fibrous structures (0º/90º) were studied in terms of their degradation over time, when incorporated into soil and when subject to accelerated aging tests in a QUV weathering test equipment. Results show that the process of biodegradation of natural fibers is clearly accelerated by the action of temperature, moisture and solar radiation, explaining further degradation of jute and sisal fibers when exposed to these factors, although more pronounced in jute fabric structures.

An efficient Azorean thermophilic consortium for lignocellulosic biomass degradation

[Excerpt] Lignocellulosic plant biomass is being envisioned by biorefinery industry as an alternative to current petroleum platform because of the large scale availability, low cost and environmentally benign production. The industrial bioprocessing designed to transform lignocellulosic biomass into biofuels are harsh and the enzymatic reactions may be severely compromised reducing the production of fermentable sugars from lignocellulosic biomass. Thermophilic bacteria consortium are a potential source of cellulases and hemicellulases adapted to extreme environmental conditions, which can be exploited as a new source for the development of more robust enzymatic cocktails. (...)

Effect of sulfate and iron (III) on LCFA degradation by a methanogenic community

[Excerpt] Under anaerobic conditions long chain fatty acids (LCFA) can be converted to methane by syntrophic bacteria and methanogenic archaea. LCFA degradation was also reported in the presence of alternative hydrogenotrophic partners, such as sulfate-reducing bacteria (SRB) and iron-reducing bacteria (IRB), which generally show higher affinity for H2 than methanogens and are more resistant to LCFA [1,2,3]. Their presence in a microbial culture degrading LCFA can be advantageous to reduce LCFA toxicity towards methanogens, although high concentrations of external electron acceptor (EEA) can lead to outcompetition of methanogens and cease methane production. In this work, we tested the effect of adding sub-stoichiometric concentrations of sulfate and iron(III) to methanogenic communities degrading LCFA. (...)

Effects of fermentation residues on the melt processability and thermomechanical degradation of PHBV produced from cheese whey using mixed microbial cultures

"Available online 28 March 2016"

Effect of different carbon materials as electron shuttles in the anaerobic biotransformation of nitroanilines

Aromatic amines resulted from azo dyes biotransformation under anaerobic conditions are generally recalcitrant to further anaerobic degradation. The catalytic effect of carbon materials (CM) on the reduction of azo dyes is known and has been confirmed in this work by increasing 3-fold the biological reduction rate of Mordant Yellow 1 (MY1). The resulting m-nitroaniline (m-NoA) was further degraded to m-phenylenediamine (m-Phe) only in the presence of CM. The use of CM to degraded anaerobically aromatic amines resulted from azo dye reduction was never reported before. In the sequence, we studied the effect of different CM on the bioreduction of o-, m- and p-NoA. Three microporous activated carbons with different surface chemistry, original (AC0), chemical oxidized with HNO3 (ACHNO3) and thermal treated (ACH2), and three mesoporous carbons, xerogels (CXA and CXB) and nanotubes (CNT) were assessed. In the absence of CM, NoA were only partially reduced to the corresponding Phe, whereas in the presence of CM, more than 90% was converted to the corresponding Phe. ACH2 and AC0 were the best electron shuttles, increasing the rates up to 8-fold. In 24h, the biological treatment of NoA and MY1 with AC0, decreased up to 88% the toxicity towards a methanogenic consortium, as compared to the non-treated solutions. This article is protected by copyright. All rights reserved

Proteomic analysis of nitrate-dependent acetone degradation by Alicycliphilus denitrificans strain BC

Alicycliphilus denitrificans strain BC grows anaerobically on acetone with nitrate as electron acceptor. Comparative proteomics of cultures of A. denitrificans strain BC grown on either acetone or acetate with nitrate was performed to study the enzymes involved in the acetone degradation pathway. In the proposed acetone degradation pathway, an acetone carboxylase converts acetone to acetoacetate, an AMP-dependent synthetase/ligase converts acetoacetate to acetoacetyl-CoA, and an acetyl-CoA acetyltransferase cleaves acetoacetyl-CoA to two acetyl-CoA. We also found a putative aldehyde dehydrogenase associated with acetone degradation. This enzyme functioned as a -hydroxybutyrate dehydrogenase catalyzing the conversion of surplus acetoacetate to -hydroxybutyrate that may be converted to the energy and carbon storage compound, poly--hydroxybutyrate. Accordingly, we confirmed the formation of poly-?-hydroxybutyrate in acetone-grown cells of strain BC. Our findings provide insight in nitrate-dependent acetone degradation that is activated by carboxylation of acetone. This will aid studies of similar pathways found in other microorganisms degrading acetone with nitrate or sulfate as electron acceptor.

Transformacion de Productos Regionales mediante procesos catalíticos. Transformation of Regional products by catalytic processes.

En este proyecto se plantea la posibilidad de aumentar el valor agregado de compuestos abundantes en nuestro país (terpenos y glicerol) mediante reacciones de oxidación y transesterificación, reemplazando los procesos homogéneos existentes por procesos heterogéneos eco-compatibles. Para ello se desarrollarán catalizadores heterogéneos del tipo MCM-41 e hidroxidos de doble capa (HDC) que posean la función activa específica para estas reacciones bajo estudio.El limoneno, principal componente del aceite esencial de limón y los alfa- y beta- pinenos, presentes en el aceite de trementina, son materiales base ampliamente disponibles. Su oxifuncionalización catalítica, mediante reacciones de epoxidación u oxidación alilica, permite producir una gran variedad de productos como fragancias, agroquímicos, medicinas, etc. En tanto, se espera un marcado incremento en la disponibilidad de glicerol, subproducto de la producción de biodiesel. Mediante su transesterificación catalítica heterogénea es posible obtener selectivamente monoésteres, los cuales tienen importantes aplicaciones como emulsionantes o agentes de estabilización en la producción de fármacos, cosméticos y alimentos. El diseño y síntesis de los materiales catalíticos mencionados permitirá la obtención de productos químicos finos por métodos limpios con bajo impacto ambiental, atendiendo a los altos niveles de contaminación ambiental generados por los procesos homogéneos tradicionales.

Respuesta adaptativa y degradación de compuestos de amonio cuaternarios sintéticos por Pseudomonas putida. Adaptative answer and degradation of quaternary ammonium compounds by Pseudomonas putida.

El objetivo de este trabajo es caracterizar la respuesta de P. putida frente a condiciones ambientales adversas dadas por la presencia del detergente catiónico tetradeciltrimetilamonio (TDTMA). El objetivo final que se persigue es el de utilizar este microorganismo como vehículo en procesos de biorremediación. El proyecto comprende aspectos relacionados con la degradación y con la respuesta adaptativa que le permiten a P. putida tolerar altas concentraciones del biocida. La degradación de TDTMA por P. putida involucra una actividad monooxigenasa, que produce trimetilamina (TMA) y tetradecilalcanal. Parte de la TMA producida es demetilada, por una TMAdehidrogenasa (TMADH), e utilizada por la bacteria como fuente de nitrógeno y parte es acumulada intracelularmente, inhibiendo el crecimiento bacteriano. Considerando la importancia de las oxigenasas y dehidrogenasas en la transformación química de compuestos recalcitrantes, se identificarán los genes responsables de la actividad monooxigenasa y de la TMADH, se caracterizarán las enzimas, lo que permitirá conocer, además, datos evolutivos de las mismas. Teniendo en cuenta que la acumulación intracelular TMA conduce a la degradación parcial del detergente, efecto contrarrestado por la adición de aluminio (Al), se investigarán si otros factores nutricionales participan en el control de la degradación de TDMA por P. putida. Se investigará si el regulador global NtrC, que se activa en respuesta a limitación de nitrógeno, participa en el metabolismo de TDTMA. Se prevé construir mutantes en los genes que codifican para monoxigenasa y TMADH y analizar la respuesta de estas cepas frente al estrés ocasionado por TDTMA y Al. En este proyecto se postula además que los cambios a nivel de fosfolípidos (PL) de membrana son una estrategia de P. putida para sobrevivir en presencia del TDTMA. Para concluir si fosfatidilglicerol es el principal responsable de la adaptación de P. putida frente al estrés ocasionado por TDTMA, se pretenden obtener mutantes afectadas en la biosíntesis de novo de PL, particularmente en cardiolipina sintasa. Paralelamente se estudiará si fosfolipasa D participa en la respuesta, lo que permitirá asignar un rol a esta enzima en procesos de señalización análogos a los que ocurren en organismos eucariotas. En presencia de TDTMA y Al, P. putida responde aumentando el contenido de fosfatidilcolina y posiblemente este PL actúe como un reservorio temporario del ión. Identificar en P. putida los genes que codifican para las enzimas responsables de su biosíntesis, particularmente fosfatidilcolina sintasa y/o fosfolípido N-metiltranferasa, conducirá a conocer el mecanismo por el cual fosfatidilcolina estaría involucrada en la respuesta a Al.

Evaluación de la degradación del suelo en agroecosistemas del centro-sur de Córdoba mediante indicadores e índices. Assessment of soil degradation in agroecosystems of central-southern Córdoba by means of indicators and indices

Las actividades agropecuarias ejercen diferentes presiones sobre los recursos naturales. Esto ha llevado, en algunas áreas, a un deterioro del suelo que provoca un impacto sobre la sustentabilidad en los sistemas agropecuarios. Para evaluar la degradación del suelo se han propuesto listas de indicadores, sin embargo, se carece de una herramienta metodológica robusta, adaptada a las condiciones edafoclimáticas regionales. Además, existe una demanda de productores e instituciones interesados en orientar acciones para preservar el suelo. El objetivo de este proyecto es evaluar la degradación física, química y biológica de los suelos en agroecosistemas del centro-sur de Córdoba. Por ello se propone desarrollar una herramienta metodológica que consiste en un set de indicadores físicos, químicos y biológicos, con valores umbrales, integrados en índices de degradación, que asistan a los agentes tomadores de decisiones y productores, en la toma de decisiones respecto de la degradación del suelo. El área de trabajo será una región agrícola del centro-sur de Córdoba con más de 100 años de agricultura. La metodología comienza con la caracterización del uso del territorio y sistemas de manejo, su clasificación y la obtención de mapas base de usos y manejos, mediante sensores remotos y encuestas. Se seleccionarán sitios de muestreo mediante una metodología semi-dirigida usando un SIG, asegurando un mínimo de un punto de muestreo por unidad de mapeo. Se elegirán sitios de referencia lo más cercano a una condición natural. Los indicadores a evaluar surgen de listas propuestas en trabajos previos del grupo, seleccionados en base a criterios internacionales y a adecuados a suelos de la región. Se usarán indicadores núcleo y complementarios. Para la obtención de umbrales, se usarán por un lado valores provenientes de la bibliografía y por otro, umbrales generados a partir de la distribución estadística del indicador en suelos de referencia. Para estandarizar cada indicador se definirá una función de transformación. Luego serán ponderarán mediante análisis estadísticos mulivariados e integrados en índices de degradación física, química y biológica, y un índice general de degradación. El abordaje concluirá con el desarrollo de dos instrumentos para la toma de decisiones: uno a escala regional, que consistirá en mapas de degradación en base a unidades cartográficas ambientales, de uso del territorio y de sistemas de manejo y otro a escala predial que informará sobre la degradación del suelo de un lote en particular, en comparación con suelos de referencia. Los actores interesados contarán con herramientas robustas para la toma de decisiones respecto de la degradación del suelo tanto a escala regional como local. Agricultural activities exert different pressures on natural resources. In some areas this has led to soil degradation and has an impact on agricultural sustainability. To assess soil degradation a robust methodological tool, adapted to regional soil and climatic conditions, is lacking. In addition, there is a demand from farmers and institutions interested in direct actions to preserve the soil. The objective of this project is to assess physical, chemical and biological soil degradation in agroecosystems of Córdoba. We propose to develop a tool that consists of a set of physical, chemical and biological indicators, with threshold values, integrated in soil degradation indices. The study area is a region with more than 100 years of agriculture. The methodology begins with the characterization of land use and management systems and the obtaining of base maps by means of remote sensing and survey. Sampling sites will be selected through a semi-directed methodology using GIS, ensuring at least one sampling point by mapping unit. Reference sites will be chosen as close to a natural condition. The proposed indicators emerge from previous works of the group, selected based on international standards and appropriate for the local soils. To obtain the thresholds, we will use, by one side, values from the literature, and by the other, values generated from the statistical distribution of the indicator in the reference soils. To standardize indicators transformation functions will be defined. Indicators will be weighted by mans of multivariate analysis and integrated in soil degradation indices. The approach concluded with the development of two instruments for decision making: a regional scale one, consisting in degradation maps based on environmental, land use and management systems mapping units; and an instrument at a plot level which will report on soil degradation of a particular plot compared to reference soils.

Degradación de efluentes de las industrias del cuero y textil mediante procesos fotocatalíticos heterogéneos empleando la luz solar. Degradation of effluents from the leather and textile industries through heterogeneous photocatalytic processes using sunlight.

El creciente desarrollo de la industria del cuero y textil en nuestro país, y específicamente en la provincia de Córdoba, ha hecho resurgir en los ultimos años una problemática aún no resuelta que es la elevada contaminación de los recursos hídricos. En ambas industrias, la operación de teñido involucra principalmente colorantes de tipo azoico los cuales son "no biodegradables" y se fragmentan liberando aminas aromáticas cancerígenas. Para abordar esta problemática, la fotocatálisis heterogénea aparece como una nueva tecnología que permitiría la completa mineralización de estos colorantes. A través de radiación y un fotocatalizador sólido adecuado se pueden generan radicales libres eficientes para la oxidación de materia orgánica (colorantes) en medio acuoso. En este sentido, se proponen tamices moleculares mesoporosos modificados con metales de transición (MT) como fotocatalizadores potencialmente aptos para la degradación de estos contaminantes. El propósito principal de este proyecto es el diseño, síntesis, caracterización y evaluación de materiales mesoporosos que presenten actividad fotocatalítica ya sea mediante la modificación de su estructura con diversos metales fotosensibles y/o empleándolos como soporte de óxido de titanio. Se pretende evaluar estos materiales en la degradación de colorantes intentando desplazar su fotosensibilidad hacia la radiación visible para desarrollar nuevas tecnologías con menor impacto ambiental y mayor aprovechamiento de la energía solar. Para ello se sintetizarán materiales del tipo MCM-41 modificados con distintos MT tales como Fe, Cr, Co, Ni y Zn mediante incorporación directa del ión metálico o impregnación. Al mismo tiempo, tanto estos últimos materiales como el MCM-41 silíceo serán empleados como soporte de TiO2. Sus propiedades fisicoquímicas se caracterizarán mediante distintas técnicas instrumentales y su actividad fotocatalítica se evaluará en la degradación de colorantes azoicos bajo radiación visible. Se seleccionará el catalizador más eficiente y se estudiarán los diversos factores que afectan el proceso de fotodegradación. Así mismo, el análisis de la concentración del colorante y los productos presentes en el medio en función del tiempo de reacción permitirá inferir sobre la cinética de la decoloración y postular posibles mecanismos de fotodegradación. Con esta propuesta se espera contribuír al desarrollo de un sector industrial importante en nuestra provincia como es el de las industrias del cuero y textil, mediante la generación de nuevas tecnologías que empleen la energía solar para la degradación de sus efluentes (colorantes). En este sentido, se espera desarrollar nuevos materiales optimizados para lograr la mayor eficiencia fotocatalítica. Esto conduciría entonces hacia la remediación de un problema ambiental de alto impacto tanto para nuestra provincia y nuestro país como para la población mundial, como es la contaminación de los recursos hídricos. Finalmente, con este proyecto se contribuirá a la formación de dos doctorandos y un maestrando, cuyos temas de tesis están vinculados con nuestro objeto de estudio. The increasing development of the textile and leather industries in our country, and specifically in Córdoba, has revived an unresolved problem that is the high contamination of water resources. In both industries, the dyeing involves mainly type azoic dyes which are not biodegradable and break releasing carcinogenic aromatic amines. Heterogeneous photocatalysis appears as a new technology that would allow the complete mineralization of these pollutants. Through radiation and a suitable solid it is possible to generate free radicals for efficient oxidation of organic matter (dyes) in aqueous medium. In this respect, mesoporous molecular sieves modified with transition metals are proposed as potential photocatalysts. The main purpose of this project is the synthesis of mesoporous materials having photocatalytic activity for the degradation of dyes. We will try to move their photosensitivity to visible radiation to develop new technologies with lower environmental impact and greater use of solar energy. Materials MCM-41 modified with metals (Fe, Cr, Co, Ni and Zn) will be synthesized by direct incorporation or impregnation. These materials and the siliceous MCM-41 will be then employed as support of TiO2. The materials will be evaluated in the photocatalytic degradation of azoic dyes under visible radiation. The influence of different factors on the photodegradation proccess will be studied. Kinetic studies will be carried out and a possible reaction way will be proposed. Thus, this work will contribute to the advancement of an important industrial sector and the remediation of an environmental problem with high impact for our province and our country. Moreover, this proyect will contribute to the development of two doctoral tesis and one magister tesis which are vinculated with our study subject.

Synthetic and mechanistic studies of the Thia-Fries Rearrangement

A study has been undertaken of the published literature on the Fries rearrangement, thermal, photo and microwave, since its discovery in 1908. A resume of these publications and especially of those pertaining to the thia-Fries rearrangement of sulfamate esters, has been compiled. Phenyl sulfamate, phenyl N,N-dimethylsulfamate, phenyl N,N-diethylsulfamate and phenyl N,N-di-n-propylsulfamate and many of their substituted compounds have been synthesised and purified, a total of thirty nine esters. The sulfamates have been characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Many of these sulfamates, twenty six in total, have been rearranged to sulfonamides in the thia-Fries rearrangement, and subsequently purified. The products were characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Mechanistic studies of the sulfamates have been investigated, particularly phenyl N,N-dimethylsulfamate. The rearrangement with various catalysts and catalytic ratios, the effect of solvents on the rearrangement and many crossover experiments have been carried out to determine the molecularity i.e. whether it is an inter-, intra- or bimolecular reaction. The microwave induced thia-Fries rearrangement has been examined to determine what effect this irradiation has on the rearrangement. Photo thia-Fries rearrangement has also been investigated.