Transfer of technical know-how in the machine-tool industry in Brazil, part II: the example of Brazil

Includes bibliography

New maritime transport scenarios. Part II: fluctuations in shipping and new scenarios

This FAL Bulletin details the situation of the shipping industry and forms the second and final part of a larger document that begins with Issue No. 338, which puts the current status of maritime trade in context. Both documents fit into a series of bulletins about ports and maritime trade in the region and are, therefore, closely linked to Issue No. 337, which sets out the need for a new port governance in the region to address the new circumstances that have arisen in the maritime market.

Inverse Modeling of GPS Multipath for Snow Depth Estimation-Part II: Application and Validation

GPS multipath reflectometry (GPS-MR) is a technique that uses geodetic quality GPS receivers to estimate snow depth. The accuracy and precision of GPS-MR retrievals are evaluated at three different sites: grasslands, alpine, and forested. The assessment yields a correlation of 0.98 and an rms error of 6-8 cm for observed snow depths of up to 2.5 m. GPS-MR underestimates in situ snow depth by 10%-15% at these three sites, although the validation methods do not measure the same footprint as GPS-MR.

Stress analysis in oral obturator prostheses, part II: photoelastic imaging

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Interactions between restorative dentistry and periodontics: luting post nonmetallic (Part II)

Endodontically treated teeth have necessary use of intracanal posts. Due to the constant need and search for esthetic materials with properties similar to tooth structure remaining fi berglass posts esthetic came good these shortcomings and are increasingly used as a fi rst option for prosthetic rehabilitation. In this case report is described step by step how to perform the cementation of a nonmetallic post and core construction for making a piece prosthetic onlay in a simplifi ed way, by choosing the self-etching cementation technique.

BLOOD AND TISSUE IDENTIFICATION OF SELECTED BIRDS AND MAMMALS, PART II: Cross Reaction Patterns of Birds and Mammals, Using Deer, Bovine, Raccoon, Chicken and Mallard Duck Antiserum, part 5

Part 5 (pp. 114-117) References Appendix

Physico-chemical properties of Brazilian cocoa butter and industrial blends. Part II - Microstructure, polymorphic behavior and crystallization characteristics

The microstructural behavior of industrial standardized cocoa butter samples and cocoa butter samples from three different Brazilian states is compared. The cocoa butters were characterized by their microstructural patterns, crystallization kinetics and polymorphic habits. The evaluation of these parameters aided in establishing relationships between the chemical compositions and crystallization behavior of the samples, as well as differentiating them in terms of technological and industrial potential for use in tropical regions.

Combustion of coal, bagasse and blends thereof Part II: Speciation of PAH emissions

This work reports on emissions of unburned hydrocarbon species from batch combustion of fixed beds of coal, sugar-cane bagasse, and blends thereof in a pre-heated two-stage laboratory furnace operated in the temperature range of 800-1000 degrees C. The effects of fuel blending, combustion staging, and operating furnace temperatures on emissions of pollutants were assessed. Furnace effluents were analyzed for products of incomplete combustion (PICs) including CO, volatile and semi-volatile hydrocarbons, and particulate matter, as has been reported in Ref. [1]. Emitted unburned hydrocarbons include traces of potentially health-hazardous Polycyclic Aromatic Hydrocarbons (PAHs), which are the focus of this work. Under the batch combustion conditions implemented herein, PAH were only generated during the volatile combustion phase of the fuels. The most prevalent species were in descending order: naphthalene, acenaphthylene, phenanthrene, fluoranthene, pyrene, dibenzofuran, benzofuran, byphenyl, fluorene, 9H-fluoren-9-one, acephenantrylene, benzo[b] fluoranthene, 1-methyl-naphthalene; 2-methyl-naphthalene, benz[a] anthracene and benzo[a] pyrene. PAH yields were the highest from combustion of neat bagasse. Combustion of the blends resulted in lower yields of PAH, than combustion of either of their neat fuel constituents. Increasing the furnace operating temperature enhanced the PAH emissions from bagasse, but had little effect on those from the coal or from the blends. Flue gas treatment in a secondary-stage furnace, upon with additional air, typically reduced PAH yields by promoting oxidation of the primary-stage furnace effluents. (C) 2011 Elsevier Ltd. All rights reserved.

Classifying A-field and B-field configurations in the presence of D-branes. Part II: Stacks of D-branes

In the paper of Bonora et al. (2008) [3] we have shown, in the context of type II superstring theory, the classification of the allowed B-field and A-field configurations in the presence of anomaly-free D-branes, the mathematical framework being provided by the geometry of gerbes. Here we complete the discussion considering in detail the case of a stack of D-branes, carrying a non-abelian gauge theory, which was just sketched in Bonora et al. (2008) [3]. In this case we have to mix the geometry of abelian gerbes, describing the B-field, with the one of higher-rank bundles, ordinary or twisted. We describe in detail the various cases that arise according to such a classification, as we did for a single D-brane, showing under which hypotheses the A-field turns out to be a connection on a canonical gauge bundle. We also generalize to the non-abelian setting the discussion about "gauge bundles with non-integral Chern classes", relating them to twisted bundles with connection. Finally, we analyze the geometrical nature of the Wilson loop for each kind of gauge theory on a D-brane or stack of D-branes.

Future trials of endovascular mechanical recanalisation therapy in acute ischemic stroke patients - A position paper endorsed by ESMINT and ESNR : Part II: methodology of future trials

Based on current data and experience, the joint working group of the European Society of Minimally Invasive Neurological Therapy (ESMINT) and the European Society of Neuroradiology (ESNR) make suggestions on trial design and conduct aimed to investigate therapeutic effects of mechanical thrombectomy (MT). We anticipate that this roadmap will facilitate the setting up and conduct of successful trials in close collaboration with our neighbouring disciplines.

Guidelines for treatment of atopic eczema (atopic dermatitis) Part II

The existing evidence for treatment of atopic eczema (atopic dermatitis, AE) is evaluated using the national standard Appraisal of Guidelines Research and Evaluation. The consensus process consisted of a nominal group process and a DELPHI procedure. Management of AE must consider the individual symptomatic variability of the disease. Basic therapy is focused on hydrating topical treatment, and avoidance of specific and unspecific provocation factors. Anti-inflammatory treatment based on topical glucocorticosteroids and topical calcineurin inhibitors (TCI) is used for exacerbation management and more recently for proactive therapy in selected cases. Topical corticosteroids remain the mainstay of therapy, but the TCI tacrolimus and pimecrolimus are preferred in certain locations. Systemic immune-suppressive treatment is an option for severe refractory cases. Microbial colonization and superinfection may induce disease exacerbation and can justify additional antimicrobial treatment. Adjuvant therapy includes UV irradiation preferably with UVA1 wavelength or UVB 311 nm. Dietary recommendations should be specific and given only in diagnosed individual food allergy. Allergen-specific immunotherapy to aeroallergens may be useful in selected cases. Stress-induced exacerbations may make psychosomatic counselling recommendable. 'Eczema school' educational programs have been proven to be helpful. Pruritus is targeted with the majority of the recommended therapies, but some patients need additional antipruritic therapies.