Results of abundance surveys of juvenile Atlantic and gulf Menhaden, Brevoortia tyrannus and B. patronus

The estuarine populations of juvenile Atlantic and gulf menhaden (Brevoortia tyrannus and B. patronus) were sampled during two-boat, surface-trawl, abundance surveys extensively conducted in the 1970s. Juvenile Atlantic menhaden were sampled in 39 estuarine streams along the U.S. Atlantic coast from northern Florida into Massachusetts. Juvenile gulf menhaden were sampled in 29 estuarine streams along the Gulf of Mexico from southeast Texas into western Florida. A stratified, two-stage, cluster sampling design was used. Annual estimates of relative juvenile abundance for each species of menhaden were obtained from catch-effort data from the surveys. There were no significant correlations, for either species, between the relative juvenile abundance estimates and fishery-dependent estimates of year-class strength. From 1972 to 1975, the relative abundance of juvenile Atlantic menhaden in north Atlantic estuaries decreased to near zero. (PDF file contains 22 pages.)

Bestandserfassung und -überwachung des atlanto-skandischen Herings. EU-Studie "Hydroacoustic Surveys of Atlanto-Scandian Herring in the Norwegian Sea, 1998-2000 (ASH-II)"

The atlanto-scandian herring consists of two major stocks, i.e. the Icelandic summer spawner and the Norwegian spring spawner. Both stocks have recovered well after complete collapse in the seventies and allow for a controlled fishery. The total allowable catch of the Norwegian spring spawner is currently 1.3 mill. t. The resumption of the fishery is accompanied by an annual and multi-national survey with Norwegian, Faeroe Islands, Icelandic and Russian contribution. In 1998 the EU will contribute to the survey with the Swedish vessel ”Argos” and in 1999 with the ”Walther Herwig III” under Dutch, Swedish and German participation. About half of the survey costs are covered by the EU by means of a funded study, the other half is contributed by the participating nations.

On the origin of shear banding instability in metallic glasses

To uncover the physical origin of shear-banding instability in metallic glass (MG), a theoretical description of thermo-mechanical deformation of MG undergoing one-dimensional simple shearing is presented. The coupled thermo-mechanical model takes into account the momentum balance, the energy balance and the dynamics of free volume. The interplay between free-volume production and temperature increase being two potential causes for shear-banding instability is examined on the basis of the homogeneous solution. It is found that the free-volume production facilitates the sudden increase in the temperature before instability and vice versa. A rigorous linear perturbation analysis is used to examine the inhomogeneous deformation, during which the onset criteria and the internal length and time scales for three types of instabilities, namely free-volume softening, thermal softening and coupling softening, are clearly revealed. The shear-banding instability originating from sole free-volume softening takes place easier and faster than that due to sole thermal softening, and dominates in the coupling softening. Furthermore, the coupled thermo-mechanical shear-band analysis does show that an initial slight distribution of local free volume can incur significant strain localization, producing a shear band. During such a localization process, the local free-volume creation occurs indeed prior to the increase in local temperature, indicating that the former is the cause of shear localization, whereas the latter is its consequence. Finally, extension of the above model to include the shear-induced dilatation shows that such dilatation facilitates the shear instability in metallic glasses.

Recent trends in the distribution patterns and catch rates from trawl surveys in Lake Victoria, Tanzania

Trawl surveys to assess the stocks of Lake Victoria (Tanzania) for estimates of biomass and yield, together with the establishment of exploitation patterns, are being undertaken under the Lake Victoria Fisheries Research Project. Preliminary surveys to establish the sampling stations and strategy were carried out between October 1997 and February 1998. Three cruises to cover the whole of Tanzanian waters were undertaken with 133 sampling stations. Data on each rates, species composition, and distribution were collected. Three sampling areas were designated: area A, B and C. In each area, almost the same distribution pattern over depth was found. Lates niloticus (L) formed over 90% of the total catch. Most L. niloticus were from 5-40 cm TL. Abundance decreased with depth, few fish were found deeper than 40m and most fish were caught at <20 m deep. Catch rates varied considerably between stations and areas. Area A had the highest catch rates with little variation over the stations. There is an indication of recovery of species diversity compared with the surveys of RV Kiboko(1985 and 1989)

Preliminary observations on the use of a frame trawl in hydroacoustic surveys

Thirteen hauls were made during the hydroacoustic survey of the Ugandan waters of Lake Victoria from 7-19 February 1999. Ten of the hauls were made above the oxycline which was clearly visible as a strong echo on the echogram at between 25 and 35 m depth in most of the sampled areas. The remaining three hauls targeted the oxycline. Approximate equal weights of Rastrineobola argentia and Haplocromine cichlids were caught in total, but with marked differences between hauls. Near the surface R. argentia dominated the catches. In midwater Haplochromines were dominant. At the oxycline Caridina niloticus was abundant

Fishery resource surveys: beyond length-weight relationship models

Fisheries resource surveys are regular management tools for rational exploitation of commercial fisheries. In a growing number of cases, the use of these resource surveys has been largely restricted to assessment of the relative well being of fish stocks and the potential yields of such fisheries. This paper seeks to demonstrate that the data from such surveys can also be easily used to evaluate species diversity of such fisheries, both in terms of species richness and equitability of distribution. Using published data on two freshwater and two marine fisheries as case studies, Shannon-Wiener Diversity Function and Simpson's Index were computed for each of these fisheries. These biodiversity indices gave a deeper insight into the environmental status of each of these fisheries, beyond what the length-weight relationship models can reveal. Generally, while the marine fisheries showed more species richness, the freshwater fisheries apparently had more stable and equilibrated fish communities

Investigations of the origin of stereocontrol in syndiospecific Ziegler-Natta polymerizations

In order to expand our understanding of the mechanism of stereocontrol in syndiospecific α-olefin polymerization, a family of Cs-symmetric, ansa-group 3 metallocenes was targeted as polymerization catalysts. The syntheses of new ansa-yttrocene and scandocene derivatives that employ the doubly [SiMe₂]- bridged ligand array (1,2-SiMe₂)₂{C₅H-3,5-(CHMe₂)₂} (where R = t- butyl, tBuThp; where R = i-propyl, iPrThp) are described. The structures of tBuThpY(µ-Cl)₂K(THF)₂, tBuThpSc(µ-Cl)₂K(Et₂O)₂, tBuThpYCH(SiMe₃)₂, Y₂{µ₂-(tBuThp)₂}(µ₂-H)₂, and tBuThpSc(µ-CH₃)₂ have been examined by single crystal X-ray diffraction methods. Ansa-yttrocenes and scandocenes that incorporate the singly [CPh₂]-bridged ligand array (CPh₂)(C₅H₄)(C₁₃H₈)(where C₅H₄ = Cp, cyclopentadienyl; where C₁₃H₈ = Flu, fluourenyl) have also been prepared. Select meallocene alkyl complexes are active single component catalysts for homopolymerization of propylene and 1-pentene. The scandocene tetramethylaluminate complexes generate polymers with the highes molecular weights of the series. Under all conditions examined atactic polymer microstructures are observed, suggesting a chain-end mechanism for stereocontrol.

A series of ansa-tantalocenes have been prepared as models for Ziegler-Natta polymerization catalysts. A singly bridged ansa-tantalocene trimethyl complex, Me₂Si(η⁵-C₅H₄)₂TaMe₃, has been prepared and used for the synthesis of a tantalocene ethylene-methyl complex. Addition of propylene to this ethylene-methyl adduct results in olefin exchange to give a mixture of endo and exo propylene isomers. Doubly-silylene bridged ansa-tantalocene complexes have been prepared with the tBuThp ligand; a tantalocene trimethyl complex and a tantalocene methylidene-methyl complex have been synthesized and characterized by X-ray diffraction. Thermolysis of the methylidene-methyl complex affords the corresponding ethylene-hydride complex. Addition of either propylene or styrene to this ethylene-hydride compound results in olefin exchange. In both cases, only one product isomer is observed. Studies of olefin exchange with ansa-tantalocene olefin-hydride and olefin-methyl complexes have provided information about the important steric influences for olefin coordination in Ziegler-Natta polymerization.

Origin of Th/U variations in chondritic meteorites

Isotope dilution thorium and uranium analyses of the Harleton chondrite show a larger scatter than previously observed in equilibrated ordinary chondrites (EOC). The linear correlation of Th/U with 1/U in Harleton (and all EOC data) is produced by variation in the chlorapatite to merrillite mixing ratio. Apatite variations control the U concentrations. Phosphorus variations are compensated by inverse variations in U to preserve the Th/U vs. 1/U correlation. Because the Th/U variations reflect phosphate ampling, a weighted Th/U average should converge to an improved solar system Th/U. We obtain Th/U=3.53 (1_-mean=0.10), significantly lower and more precise than previous estimates.

To test whether apatite also produces Th/U variation in CI and CM chondrites, we performed P analyses on the solutions from leaching experiments of Orgueil and Murchison meteorites.

A linear Th/U vs. 1/U correlation in CI can be explained by redistribution of hexavalent U by aqueous fluids into carbonates and sulfates.

Unlike CI and EOC, whole rock Th/U variations in CMs are mostly due to Th variations. A Th/U vs. 1/U linear correlation suggested by previous data for CMs is not real. We distinguish 4 components responsible for the whole rock Th/U variations: (1) P and actinide-depleted matrix containing small amounts of U-rich carbonate/sulfate phases (similar to CIs); (2) CAIs and (3) chondrules are major reservoirs for actinides, (4) an easily leachable phase of high Th/U. likely carbonate produced by CAI alteration. Phosphates play a minor role as actinide and P carrier phases in CM chondrites.

Using our Th/U and minimum galactic ages from halo globular clusters, we calculate relative supernovae production rates for ²³²Th/²³⁸U and ²³⁵U/²³⁸U for different models of r-process nucleosynthesis. For uniform galactic production, the beginning of the r-process nucleosynthesis must be less than 13 Gyr. Exponentially decreasing production is also consistent with a 13 Gyr age, but very slow decay times are required (less than 35 Gyr), approaching the uniform production. The 15 Gyr Galaxy requires either a fast initial production growth (infall time constant less than 0.5 Gyr) followed by very low decrease (decay time constant greater than 100 Gyr), or the fastest possible decrease (≈8 Gyr) preceded by slow in fall (≈7.5 Gyr).

The origin of the transverse relaxation time in optically excited semiconductor quantum wells

The origin of the transverse relaxation time in optically excited semiconductor quantum wells is investigated based on the vector property of the interband transition matrix elements. The dephasing rate due to carrier-carrier (CC) scattering is found to be equal to half of the common momentum relaxation rate. The analytical expression of the polarization dephasing due to CC scattering in two-dimension is established and the dependence of the dephasing rate Gamma(cc) on the carrier density N is determined to be Gamma(cc) = constant (.) N-1/2, which is used to explain the experimental results and provides a promising physical picture. (C) 2004 Elsevier B.V. All rights reserved.

Origin of the double-peak structure in longitudinal momentum distributions for single ionization of an He atom in strong laser field

The single ionization of an He atom by intense linearly polarized laser field in the tunneling regime is studied by S- matrix theory. When only the first term of the expansion of the S matrix is considered and time, spatial distribution, and fluctuation of the laser pulse are taken into account, the obtained momentum distribution in the polarization direction of laser field is consistent with the semiclassical calculation, which only considers tunneling and the interaction between the free electron and external field. When the second term, which includes the interaction between the core and the free electron, is considered, the momentum distribution shows a complex multipeak structure with the central minimum and the positions of some peaks are independent of the intensity in some intensity regime, which is consistent with the recent experimental result. Based on our analysis, we found that the structures observed in the momentum distribution of an He atom are attributed to the " soft" collision of the tunneled electron with the core.

Preliminary surveys of the fish and fisheries of the Nzoia, Nyando and Sondu Miriu rivers, Kenya

Three Lake Victoria rivers were sampled to assess fish abundance and distribution in preparation for assessment of catches from the river systems. Preliminary fish abundance data indicate that fishing potential upstream is negligible but that important commercial species are present in the downstream floodplain areas. Three catfish species were recorded in the Nzoia river system that have not been found previously in the Kenyan sector of the Lake Victoria system, together with possibly two undescribed Barbus species.

Bathymetric surveys and lake deposits

A progress report on the bathymetric survey of Windereme undertaken in June 1937 by the Hydrographic Department of the Admiralty. The brief article outlines the background of the surveying process as well as the initial effectiveness of the survey work. There is a brief background to the geomorphological processes which were involved in shaping the Lake District topography, as well as some explanation of previous studies undertaken in the area. The report includes a figure showing the cross sections of lake beds and a figure detailing a core from the bottom deposits of Windermere.

Microscopic Origin of Macroscopic Strength in Granular Media: A Numerical and Analytical Approach

Constitutive modeling in granular materials has historically been based on macroscopic experimental observations that, while being usually effective at predicting the bulk behavior of these type of materials, suffer important limitations when it comes to understanding the physics behind grain-to-grain interactions that induce the material to macroscopically behave in a given way when subjected to certain boundary conditions.

The advent of the discrete element method (DEM) in the late 1970s helped scientists and engineers to gain a deeper insight into some of the most fundamental mechanisms furnishing the grain scale. However, one of the most critical limitations of classical DEM schemes has been their inability to account for complex grain morphologies. Instead, simplified geometries such as discs, spheres, and polyhedra have typically been used. Fortunately, in the last fifteen years, there has been an increasing development of new computational as well as experimental techniques, such as non-uniform rational basis splines (NURBS) and 3D X-ray Computed Tomography (3DXRCT), which are contributing to create new tools that enable the inclusion of complex grain morphologies into DEM schemes.

Yet, as the scientific community is still developing these new tools, there is still a gap in thoroughly understanding the physical relations connecting grain and continuum scales as well as in the development of discrete techniques that can predict the emergent behavior of granular materials without resorting to phenomenology, but rather can directly unravel the micro-mechanical origin of macroscopic behavior.

In order to contribute towards closing the aforementioned gap, we have developed a micro-mechanical analysis of macroscopic peak strength, critical state, and residual strength in two-dimensional non-cohesive granular media, where typical continuum constitutive quantities such as frictional strength and dilation angle are explicitly related to their corresponding grain-scale counterparts (e.g., inter-particle contact forces, fabric, particle displacements, and velocities), providing an across-the-scale basis for better understanding and modeling granular media.

In the same way, we utilize a new DEM scheme (LS-DEM) that takes advantage of a mathematical technique called level set (LS) to enable the inclusion of real grain shapes into a classical discrete element method. After calibrating LS-DEM with respect to real experimental results, we exploit part of its potential to study the dependency of critical state (CS) parameters such as the critical state line (CSL) slope, CSL intercept, and CS friction angle on the grain's morphology, i.e., sphericity, roundness, and regularity.

Finally, we introduce a first computational algorithm to ``clone'' the grain morphologies of a sample of real digital grains. This cloning algorithm allows us to generate an arbitrary number of cloned grains that satisfy the same morphological features (e.g., roundness and aspect ratio) displayed by their real parents and can be included into a DEM simulation of a given mechanical phenomenon. In turn, this will help with the development of discrete techniques that can directly predict the engineering scale behavior of granular media without resorting to phenomenology.