935 resultados para Nitrogen fixing algae
Resumo:
Specific marine macro algae species abundant at the Portuguese coast (Laminaria hyperborea, Bifurcaria bifurcata, Sargassum muticum and Fucus spiralis) were shown to be effective for removing toxic metals (Cd(II), Zn(II) and Pb(II)) from aqueous solutions. The initial metal concentrations in solution were about 75–100 mg L−1. The observed biosorption capacities for cadmium, zinc and lead ions were in the ranges of 23.9–39.5, 18.6–32.0 and 32.3–50.4 mg g−1, respectively. Kinetic studies revealed that the metal uptake rate was rather fast, with 75% of the total amount occurring in the first 10 min for all algal species. Experimental data were well fitted by a pseudo-second order rate equation. The contribution of internal diffusion mechanism was significant only to the initial biosorption stage. Results indicate that all the studied macro algae species can provide an efficient and cost-effective technology for eliminating heavy metals from industrial effluents.
Resumo:
The treatment efficiency of laboratory wastewaters was evaluated and ecotoxicity tests with Chlorella vulgaris were performed on them to assess the safety of their environmental discharge. For chemical oxygen demand wastewaters, chromium (VI), mercury (II) and silver were efficiently removedby chemical treatments.Areduction of ecotoxicitywas achieved; nevertheless, an EC50 (effective concentration that causes a 50% inhibition in the algae growth) of 1.5% (v/v) indicated still high level of ecotoxicity. For chloride determination wastewaters, an efficient reduction of chromium and silver was achieved after treatment. Regarding the reduction of ecotoxicity observed, EC50 increased from 0.059% to 0.5%, only a 0.02% concentration in the aquatic environment would guarantee no effects. Wastewaters containing phenanthroline/iron (II) complex were treated by chemical oxidation. Treatmentwas satisfactory concerning chemical parameters, although an increase in ecotoxicitywas observed (EC50 reduced from 0.31% to 0.21%). The wastes from the kinetic study of persulphate and iodide reaction were treated with sodium bisulphite until colour was removed. Although they did not reveal significant ecotoxicity, only over 1% of the untreated waste produced observable effects over algae. Therefore, ecotoxicity tests could be considered a useful tool not only in laboratory effluents treatment, as shown, but also in hazardous wastewaters management.
Resumo:
Microbiology (2009), 155, 3476–3490
Resumo:
A thesis submitted for the degree of Ph. D. in Physics
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia do ambiente, perfil de engenharia sanitária
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil Engenharia Sanitária
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica
Resumo:
O Azoto (N): da ciência para a sociedade é um projecto de comunicação de ciência que tem por objecNvo consciencializar os jovens para as ameaças que o azoto (N) em excesso traz para a humanidade. Pode ser dividido em duas partes. Uma, de invesNgação, sobre a análise de resultados de uma consulta pública realizada entre professores, usando o método qualitaNvo do focus group, para compreender a sua sensibilidade e propostas de solução para minimizar o excesso de N no ambiente. Os resultados obNdos foram instrumentais para o desenvolvimento da segunda parte. Esta segunda parte é uma proposta de projecto a submeter ao Horizon 2020, no âm-‐ bito da “Science with and for Society “. Nela se propõe uma abordagem educaNva trans-‐disciplinar, conseguida através da interacção entre docentes do secundário, e do ensino superior, associação de pais e organizações cívicas não governamentais, com vista à consciencialização dos jovens para as ameaças do N em excesso no meio ambiente, fazendo o enquadramento cien@fico e fornecendo abordagens tecnológi-‐ cas. A inovação desta proposta baseia-‐se: (i) no acompanhamento e desenvolvimen-‐ to profissional dos docentes do secundário, (ii) na moNvação dos estudantes a de-‐ senvolver o seu próprio estudo e pesquisa com a tutoria dos docentes, da escola e do ensino superior, e (iii) no desenvolvimento de capacidades de comunicação dos jo-‐ vens para exercer uma cidadania acNva em prol da minimização das ameaças do N.
Resumo:
Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.
Resumo:
In Amazonian floodplains the trees are exposed to extreme flooding of up to 230 days a year. Waterlogging of the roots and stems affects growth and metabolic activity of the trees. An increased leaf fall in the aquatic period and annual increment rings in the wood indicate periodical growth reductions. The present study aims at documenting seasonal changes of metabolism and vitality of adult trees in the annual cycle as expressed by changes of leaf nitrogen content. Leaves of six tree species common in floodplains in Central Amazonia and typical representants of different growth strategies were collected every month between May 1994 and June 1995 in the vicinity of Manaus, Brazil. Mean leaf nitrogen content varied between 1.3% and 3.2% in the non-flooded trees. Three species showed significantly lower Ν content in the flooded period (p=0.05, 0.001, 0.001), the difference ranging 20-25% lower than in the non-flooded period. Two species showed no significant difference while Nectandra amazonum showed 32% more Ν in the flooded season (p=0.001). Leaf nitrogen content was generally high when new leaves were flushed (in the flooded period) and decreased continuously thereafter in all species. Three species showed an additional peak of nitrogen during the first month of the terrestrial phase, in leaves which had flushed earlier, indicating that flooding may disturb nitrogen uptake.
Resumo:
Fruit tree production is gaining an increasing importance in the central Amazon and elsewhere in the humid tropics, but very little is known about the nutrient dynamics in the soil-plant system. The present study quantified the effects of fertilization and cover cropping with a legume (Pueraria phaseoloides (Roxb.) Benth.) on soil nitrogen (N) dynamics and plant nutrition in a young guarana plantation (Paullinia cupana Kunth. (H.B. and K.) var. sorbilis (Mart.) Ducke) on a highly weathered Xanthic Ferralsol. Large subsoil nitrate (NO3-) accumulation at 0.3-3 m below the guarana plantation indicated N leaching from the topsoil. The NO3- contents to a depth of 2 m were 2.4 times greater between the trees than underneath unfertilized trees (P<0.05). The legume cover crop between the trees increased soil N availability as shown by elevated aerobic N mineralization and lower N immobilization in microbial biomass. The guarana N nutrition and yield did not benefit from the N input by biological fixation of atmospheric N2 by the legume cover (P>0.05). Even without a legume intercrop, large amounts of NO3- were found in the subsoil between unfertilized trees. Subsoil NO3- between the trees could be utilized, however, by fertilized guarana. This can be explained by a more vigorous growth of fertilized trees which had a larger nutrient demand and exploited a larger soil volume. With a legume cover crop, however, more mineral N was available at the topsoil which was leached into the subsoil and consequently accumulated at 0.3-3 m depth. Fertilizer additions of P and K were needed to increase subsoil NO3- use between trees.
Resumo:
Global scale analyses of soil and foliage δ15N have found positive relationships between δ15N and ecosystem N loss (suggesting an open N cycle) and a negative relationship between δ15N and water availability. We show here that soils and leaves from tropical heath forests are depleted in 15N relative to 'typical' forests suggesting that they have a tight N cycle and are therefore limited by N rather than by, often suggested, water availability.
Resumo:
The ternary aluminium oxynitride (AlNxOy) system offers the possibility to obtain a wide range of properties by tailoring the ratio between pure Al, AlNx and AlOy and therefore opening a significant number of possible applications. In this work the thermal behaviour of AlNxOy thin films was analysed by modulated infrared radiometry (MIRR), taking as reference the binary AlOy and AlNx systems. MIRR is a non-contact and non-destructive thermal wave measurement technique based on the excitation, propagation and detection of temperature oscillations of very small amplitudes. The intended change of the partial pressure of the reactive gas (N2 and/or O2) influenced the target condition and hence the deposition characteristics which, altogether, affected the composition and microstructure of the films. Based on the MIRR measurements and their qualitative and quantitative interpretation, some correlations between the thermal transport properties of the films and their chemical/physical properties have been found. Furthermore, the potential of such technique applied in this oxynitride system, which present a wide range of different physical responses, is also discussed. The experimental results obtained are consistent with those reported in previous works and show a high potential to fulfil the demands needed for the possible applications of the systems studied. They are clearly indicative of an adequate thermal response if this particular thin film system is aimed to be applied in small sensor devices or in electrodes for biosignal acquisition, such as those for electroencephalography or electromyography as it is the case of the main research area that is being developed in the group.
Resumo:
La provincia de Córdoba participa con aproximadamente el 23 por ciento del área total sembrada anualmente con alfalfa en nuestro país y, en los últimos años, se ha incrementado levemente, en contraste con las provincias de Buenos Aires, Santa Fe y Entre Ríos, donde ha decrecido. La inoculación de este cultivo con cepas del género Sinorhizobium ha permitido mejorar su rendimiento en los suelos de la región semiárida. La utilización para la siembra de semillas preinoculadas con microorganismos de origen extranjero, cuya eficiencia y adaptación a las condiciones locales no siempre se conocen, y con escasa capacidad de competencia ante las cepas naturalizadas, trae como consecuencia un bajo establecimiento de la nodulación y por consiguiente una escasa reposición del nitrógeno removido del suelo. Aún cuando la inoculación está relativamente difundida, en la actualidad no se ha determinado la proporción relativa de nitrógeno fijado por las cepas introducidas respecto de las nativas o naturalizadas, ni la competencia que se genera en el suelo por la ocupación de los sitios potenciales para la formación de nódulos. Nuestra hipótesis de trabajo es: "la inoculación con cepas de Sinorhizobium meliloti debidamente caracterizadas y eficientes en la fijación del nitrógeno atmosférico mejorará el rendimiento de alfalfa en la región centro-sur de Córdoba". Los objetivos de este estudio son caracterizar fenotípica y genotípica el aislamiento Sinorhizobium meliloti 3DOh13 y evaluar su eficiencia simbiótica en el cultivo de alfalfa, mediante ensayos de infectividad, eficiencia y competencia con cepas nativas. La evaluación de la infectividad de la cepa comprende estudios de cinética de la nodulación, número total de nódulos y ubicación de los mismos en experiencias donde las plantas crecen en condiciones de invernáculo sobre un soporte de tierra:arena:perlita (2:1:1). Se realizarán ensayos de competitividad, coinoculando semillas con la cepa DOh13 y otras nativas, en bolsas plásticas con medio mineral en los que se desafiarán los distintos aislamientos. Se inoculan las plantas con sólo dos aislamientos y los nódulos de la raíz principal serán extraídos a fin de aislar los microorganismos ocupantes, los que serán diferenciados por marca de resistencia a antibioticos. La eficiencia en la fijación de nitrógeno será cuantificada por las técnicas de reducción del acetileno en el nódulo y, en caso de ser necesario, se usará el método de Kjeldahl (N total) para la raíz, tejido aéreo o planta entera. La caracterización genotípica de S. meliloti 3DOh13 incluirá métodos de fingerprint de ADN por técnicas de PCR y secuenciamiento del ADNr 16S. Esta investigación permitirá obtener información precisa sobre la respuesta de alfalfa a la inoculación con la cepa de referencia. El producto que se espera obtener es un nuevo inoculante, formulado con una cepa efectiva en la fijación de nitrógeno, debidamente caracterizada y con probada capacidad de adaptación a los suelos de la región
Resumo:
v.4 (1916-1923)