Sustainability of Open Access Services: Phase 4 Workshop report

Phase 4: Review of the conditions under which individual services and platforms can be sustained On Tuesday 1 October 2013, in Bristol, United Kingdom, Knowledge Exchange brought together a group of international Open Access Service providers to discuss the sustainability of their services. A number of recurring lessons learned were mentioned; Though project funding can be used to start up a service, it does not guarantee the continuation of a service and it can be hard to establish the service as a viable entity, standing on its own feet. Research funders should be aware that if they have policies or mandates for making research outputs available they will eventually also be responsible for on-going support for the underlying infrastructure. At present some services are used globally but the costs are only covered by a limited geographic spread, sometimes only a number of institutions or only one country. Finding other funding sources can be challenging. Various routes were mentioned including commercial partnerships, memberships, offering additional paid services or using a Freemium model. There is not one model that will fit all. As more services turn to library sponsorship to sustain them, one strategy might be to bundle the requests and approach a group of research and infrastructure funders or institutions (and others) with a package rather than each service going through the same resource consuming process of soliciting funding. This will also allow the community to identify gaps, dependencies and overlap in the services. The possibility of setting up an organisation to bundle the services was discussed and a number of risks were identified.

Preparing for the Research Excellence Framework: Examples of Open Access Good Practice across the United Kingdom

This article concerns how higher education institutions across the United Kingdom are implementing systems and workflows in order to meet open access requirements for the next Research Excellence Framework. The way that institutions are preparing is not uniform, although there are key areas which require attention: cost management, advocacy, systems and metadata, structural workflows, and internal policy. Examples of preparative work in these areas are taken from institutions who have participated in the Open Access Good Practice initiative supported by Jisc.

Public firm sponsorship of open source software: A knowledge-based approach to open innovation

As an emerging innovation paradigm gaining momentum in recent years, the open innovation paradigm is calling for greater theoretical depth and more empirical research. This dissertation proposes that open innovation in the context of open source software sponsorship may be viewed as knowledge strategies of the firm. Hence, this dissertation examines the performance determinants of open innovation through the lens of knowledge-based perspectives. Using event study and regression methodologies, this dissertation found that these open source software sponsorship events can indeed boost the stock market performance of US public firms. In addition, both the knowledge capabilities of the firms and the knowledge profiles of the open source projects they sponsor matter for performance. In terms of firm knowledge capabilities, internet service firms perform better than other firms owing to their advantageous complementary capabilities. Also, strong knowledge exploitation capabilities of the firm are positively associated with performance. In terms of the knowledge profile of sponsored projects, platform projects perform better than component projects. Also, community-originated projects outperform firm-originated projects. Finally, based on these findings, this dissertation discussed the important theoretical implications for the strategic tradeoff between knowledge protection and sharing.

Libraries and open access: the implications of open-access publishing and dissemination for libraries in higher education institutions

This chapter discusses the consequences of open-access (OA) publishing and dissemination for libraries in higher education institutions (HEIs). Key questions (which are addressed in this chapter) include: 1. How might OA help information provision? 2. What changes to library services will arise from OA developments (particularly if OA becomes widespread)? 3. How do these changes fit in with wider changes affecting the future role of libraries? 4. How can libraries and librarians help to address key practical issues associated with the implementation of OA (particularly transition issues)? This chapter will look at OA from the perspective of HE libraries and will make four key points: 1. Open access has the potential to bring benefits to the research community in particular and society in general by improving information provision. 2. If there is widespread open access to research content, there will be less need for library-based activity at the institution level, and more need for information management activity at the supra-institutional or national level. 3. Institutional libraries will, however, continue to have an important role to play in areas such as managing purchased or licensed content, curating institutional digital assets, and providing support in the use of content for teaching and research. 4. Libraries are well-placed to work with stakeholders within their institutions and beyond to help resolve current challenges associated with the implementation of OA policies and practices.

Appraisal of open software for finite element simulation of 2D metal sheet laser cut.

FEA simulation of thermal metal cutting is central to interactive design and manufacturing. It is therefore relevant to assess the applicability of FEA open software to simulate 2D heat transfer in metal sheet laser cuts. Application of open source code (e.g. FreeFem++, FEniCS, MOOSE) makes possible additional scenarios (e.g. parallel, CUDA, etc.), with lower costs. However, a precise assessment is required on the scenarios in which open software can be a sound alternative to a commercial one. This article contributes in this regard, by presenting a comparison of the aforementioned freeware FEM software for the simulation of heat transfer in thin (i.e. 2D) sheets, subject to a gliding laser point source. We use the commercial ABAQUS software as the reference to compare such open software. A convective linear thin sheet heat transfer model, with and without material removal is used. This article does not intend a full design of computer experiments. Our partial assessment shows that the thin sheet approximation turns to be adequate in terms of the relative error for linear alumina sheets. Under mesh resolutions better than 10e−5 m , the open and reference software temperature differ in at most 1 % of the temperature prediction. Ongoing work includes adaptive re-meshing, nonlinearities, sheet stress analysis and Mach (also called ‘relativistic’) effects.

Beam Search Algorithms for Minimizing Tool Switches on a Flexible Manufacturing System

In the minimization of tool switches problem we seek a sequence to process a set of jobs so that the number of tool switches required is minimized. In this work different variations of a heuristic based on partial ordered job sequences are implemented and evaluated. All variations adopt a depth first strategy of the enumeration tree. The computational test results indicate that good results can be obtained by a variation which keeps the best three branches at each node of the enumeration tree, and randomly choose, among all active nodes, the next node to branch when backtracking.

Um algoritmo enumerativo baseado em ordenamento parcial para resolução do problema de minimização de trocas de ferramentas

No problema de minimização de troca de ferramentas procura-se por uma sequência para processar um conjunto de tarefas de modo que o número requerido de trocas de ferramentas seja o menor possível. Neste trabalho propõe-se um algoritmo para resolver este problema baseado em um ordenamento parcial das tarefas. Uma sequência ótima é obtida expandindo-se as sequências parciais enumeradas. Testes computacionais são apresentados.

Uma nova heurística para o problema de minimização de trocas de ferramentas

O problema de minimização de troca de ferramentas (MTSP) busca uma sequência de processamento de um conjunto de tarefas, de modo a minimizar o número de trocas de ferramentas requeridas. Este trabalho apresenta uma nova heurística para o MTSP, capaz de produzir bons limitantes superiores para um algoritmo enumerativo. Esta heurística possui duas fases: uma fase construtiva que é baseada em um grafo em que os vértices correspondem a ferramentas e existe um arco k = (i, j) que liga os vértices i e j se e somente se as ferramentas i e j são necessárias para a execução de alguma tarefa k; e uma fase de refinamento baseada na meta-heurística Busca Local Iterativa. Resultados computacionais mostram que a heurística proposta tem um bom desempenho para os problemas testados, contribuindo para uma redução significativa no número de nós gerados de um algoritmo enumerativo.

Risk minimization in water quality control problems of a river system

Methodologies are presented for minimization of risk in a river water quality management problem. A risk minimization model is developed to minimize the risk of low water quality along a river in the face of conflict among various stake holders. The model consists of three parts: a water quality simulation model, a risk evaluation model with uncertainty analysis and an optimization model. Sensitivity analysis, First Order Reliability Analysis (FORA) and Monte-Carlo simulations are performed to evaluate the fuzzy risk of low water quality. Fuzzy multiobjective programming is used to formulate the multiobjective model. Probabilistic Global Search Laussane (PGSL), a global search algorithm developed recently, is used for solving the resulting non-linear optimization problem. The algorithm is based on the assumption that better sets of points are more likely to be found in the neighborhood of good sets of points, therefore intensifying the search in the regions that contain good solutions. Another model is developed for risk minimization, which deals with only the moments of the generated probability density functions of the water quality indicators. Suitable skewness values of water quality indicators, which lead to low fuzzy risk are identified. Results of the models are compared with the results of a deterministic fuzzy waste load allocation model (FWLAM), when methodologies are applied to the case study of Tunga-Bhadra river system in southern India, with a steady state BOD-DO model. The fractional removal levels resulting from the risk minimization model are slightly higher, but result in a significant reduction in risk of low water quality. (c) 2005 Elsevier Ltd. All rights reserved.

Constructing a Community : Myths and Realities of the Open Development Model

The open development model of software production has been characterized as the future model of knowledge production and distributed work. Open development model refers to publicly available source code ensured by an open source license, and the extensive and varied distributed participation of volunteers enabled by the Internet. Contemporary spokesmen of open source communities and academics view open source development as a new form of volunteer work activity characterized by hacker ethic and bazaar governance . The development of the Linux operating system is perhaps the best know example of such an open source project. It started as an effort by a user-developer and grew quickly into a large project with hundreds of user-developer as contributors. However, in hybrids , in which firms participate in open source projects oriented towards end-users, it seems that most users do not write code. The OpenOffice.org project, initiated by Sun Microsystems, in this study represents such a project. In addition, the Finnish public sector ICT decision-making concerning open source use is studied. The purpose is to explore the assumptions, theories and myths related to the open development model by analysing the discursive construction of the OpenOffice.org community: its developers, users and management. The qualitative study aims at shedding light on the dynamics and challenges of community construction and maintenance, and related power relations in hybrid open source, by asking two main research questions: How is the structure and membership constellation of the community, specifically the relation between developers and users linguistically constructed in hybrid open development? What characterizes Internet-mediated virtual communities and how can they be defined? How do they differ from hierarchical forms of knowledge production on one hand and from traditional volunteer communities on the other? The study utilizes sociological, psychological and anthropological concepts of community for understanding the connection between the real and the imaginary in so-called virtual open source communities. Intermediary methodological and analytical concepts are borrowed from discourse and rhetorical theories. A discursive-rhetorical approach is offered as a methodological toolkit for studying texts and writing in Internet communities. The empirical chapters approach the problem of community and its membership from four complementary points of views. The data comprises mailing list discussion, personal interviews, web page writings, email exchanges, field notes and other historical documents. The four viewpoints are: 1) the community as conceived by volunteers 2) the individual contributor s attachment to the project 3) public sector organizations as users of open source 4) the community as articulated by the community manager. I arrive at four conclusions concerning my empirical studies (1-4) and two general conclusions (5-6). 1) Sun Microsystems and OpenOffice.org Groupware volunteers failed in developing necessary and sufficient open code and open dialogue to ensure collaboration thus splitting the Groupware community into volunteers we and the firm them . 2) Instead of separating intrinsic and extrinsic motivations, I find that volunteers unique patterns of motivations are tied to changing objects and personal histories prior and during participation in the OpenOffice.org Lingucomponent project. Rather than seeing volunteers as a unified community, they can be better understood as independent entrepreneurs in search of a collaborative community . The boundaries between work and hobby are blurred and shifting, thus questioning the usefulness of the concept of volunteer . 3) The public sector ICT discourse portrays a dilemma and tension between the freedom to choose, use and develop one s desktop in the spirit of open source on one hand and the striving for better desktop control and maintenance by IT staff and user advocates, on the other. The link between the global OpenOffice.org community and the local end-user practices are weak and mediated by the problematic IT staff-(end)user relationship. 4) Authoring community can be seen as a new hybrid open source community-type of managerial practice. The ambiguous concept of community is a powerful strategic tool for orienting towards multiple real and imaginary audiences as evidenced in the global membership rhetoric. 5) The changing and contradictory discourses of this study show a change in the conceptual system and developer-user relationship of the open development model. This change is characterized as a movement from hacker ethic and bazaar governance to more professionally and strategically regulated community. 6) Community is simultaneously real and imagined, and can be characterized as a runaway community . Discursive-action can be seen as a specific type of online open source engagement. Hierarchies and structures are created through discursive acts. Key words: Open Source Software, open development model, community, motivation, discourse, rhetoric, developer, user, end-user

Application of the multi-objective Alliance algorithm to a benchmark aerodynamic optimization problem

This paper introduces a new version of the multiobjective Alliance Algorithm (MOAA) applied to the optimization of the NACA 0012 airfoil section, for minimization of drag and maximization of lift coefficients, based on eight section shape parameters. Two software packages are used: XFoil which evaluates each new candidate airfoil section in terms of its aerodynamic efficiency, and a Free-Form Deformation tool to manage the section geometry modifications. Two versions of the problem are formulated with different design variable bounds. The performance of this approach is compared, using two indicators and a statistical test, with that obtained using NSGA-II and multi-objective Tabu Search (MOTS) to guide the optimization. The results show that the MOAA outperforms MOTS and obtains comparable results with NSGA-II on the first problem, while in the other case NSGA-II is not able to find feasible solutions and the MOAA is able to outperform MOTS. © 2013 IEEE.

Precise solutions of the one-dimensional Monge-Kantorovich problem

Plakhov, A.Y., (2004) 'Precise solutions of the one-dimensional Monge-Kantorovich problem', Sbornik: Mathematics 195(9) pp.1291-1307 RAE2008

Analysis of the domain of applicability of an algorithm for a resources system selection problem for Distributed/Agile/Virtual Enterprises integration

The process of resources systems selection takes an important part in Distributed/Agile/Virtual Enterprises (D/A/V Es) integration. However, the resources systems selection is still a difficult matter to solve in a D/A/VE, as it is pointed out in this paper. Globally, we can say that the selection problem has been equated from different aspects, originating different kinds of models/algorithms to solve it. In order to assist the development of a web prototype tool (broker tool), intelligent and flexible, that integrates all the selection model activities and tools, and with the capacity to adequate to each D/A/V E project or instance (this is the major goal of our final project), we intend in this paper to show: a formulation of a kind of resources selection problem and the limitations of the algorithms proposed to solve it. We formulate a particular case of the problem as an integer programming, which is solved using simplex and branch and bound algorithms, and identify their performance limitations (in terms of processing time) based on simulation results. These limitations depend on the number of processing tasks and on the number of pre-selected resources per processing tasks, defining the domain of applicability of the algorithms for the problem studied. The limitations detected open the necessity of the application of other kind of algorithms (approximate solution algorithms) outside the domain of applicability founded for the algorithms simulated. However, for a broker tool it is very important the knowledge of algorithms limitations, in order to, based on problem features, develop and select the most suitable algorithm that guarantees a good performance.

On the resolution of the generalized nonlinear complementarity problem

Minimization of a differentiable function subject to box constraints is proposed as a strategy to solve the generalized nonlinear complementarity problem (GNCP) defined on a polyhedral cone. It is not necessary to calculate projections that complicate and sometimes even disable the implementation of algorithms for solving these kinds of problems. Theoretical results that relate stationary points of the function that is minimized to the solutions of the GNCP are presented. Perturbations of the GNCP are also considered, and results are obtained related to the resolution of GNCPs with very general assumptions on the data. These theoretical results show that local methods for box-constrained optimization applied to the associated problem are efficient tools for solving the GNCP. Numerical experiments are presented that encourage the use of this approach.