A micro gas turbines for UK domestic combined heat and power

Various micro-radial compressor configurations were investigated using one-dimensional meanline and computational fluid dynamics (CFD) techniques for use in a micro gas turbine (MGT) domestic combined heat and power (DCHP) application. Blade backsweep, shaft speed, and blade height were varied at a constant pressure ratio. Shaft speeds were limited to 220 000 r/min, to enable the use of a turbocharger bearing platform. Off-design compressor performance was established and used to determine the MGT performance envelope; this in turn was used to assess potential cost and environmental savings in a heat-led DCHP operating scenario within the target market of a detached family home. A low target-stage pressure ratio provided an opportunity to reduce diffusion within the impeller. Critically for DCHP, this produced very regular flow, which improved impeller performance for a wider operating envelope. The best performing impeller was a low-speed, 170 000 r/min, low-backsweep, 15° configuration producing 71.76 per cent stage efficiency at a pressure ratio of 2.20. This produced an MGT design point system efficiency of 14.85 per cent at 993 W, matching prime movers in the latest commercial DCHP units. Cost and CO2 savings were 10.7 per cent and 6.3 per cent, respectively, for annual power demands of 17.4 MWht and 6.1 MWhe compared to a standard condensing boiler (with grid) installation. The maximum cost saving (on design point) was 14.2 per cent for annual power demands of 22.62 MWht and 6.1 MWhe corresponding to an 8.1 per cent CO2 saving. When sizing, maximum savings were found with larger heat demands. When sized, maximum savings could be made by encouraging more electricity export either by reducing household electricity consumption or by increasing machine efficiency.

The microstructure of the foreign exchange market:the determinants of bid-ask spreads in the foreign exchange market

The purpose of this thesis is to shed more light in the FX market microstructure by examining the determinants of bid-ask spread for three currencies pairs, the US dollar/Japanese yen, the British pound/US dollar and the Euro/US dollar in different time zones. I examine the commonality in liquidity with the elaboration of FX market microstructure variables in financial centres across the world (New York, London, Tokyo) based on the quotes of three exchange rate currency pairs over a ten-year period. I use GARCH (1,1) specifications, ICSS algorithm, and vector autoregression analysis to examine the effect of trading activity, exchange rate volatility and inventory holding costs on both quoted and relative spreads. ICSS algorithm results show that intraday spread series are much less volatile compared to the intraday exchange rate series as the number of change points obtained from ICSS algorithm is considerably lower. GARCH (1,1) estimation results of daily and intraday bid-ask spreads, show that the explanatory variables work better when I use higher frequency data (intraday results) however, their explanatory power is significantly lower compared to the results based on the daily sample. This suggests that although daily spreads and intraday spreads have some common determinants there are other factors that determine the behaviour of spreads at high frequencies. VAR results show that there are some differences in the behaviour of the variables at high frequencies compared to the results from the daily sample. A shock in the number of quote revisions has more effect on the spread when short term trading intervals are considered (intra-day) compared to its own shocks. When longer trading intervals are considered (daily) then the shocks in the spread have more effect on the future spread. In other words, trading activity is more informative about the future spread when intra-day trading is considered while past spread is more informative about the future spread when daily trading is considered

Market orientation of hotels and travel services in China

China is unique both politically and economically. How this uniqueness impacts on firms'' adoption of market orientation and the impact of market orientation on business performance, however, remain unclear. This book reports a study by Dr Riliang Qu who aims to address the above knowledge void. The study employs a two-stage research strategy including interviews and a survey of 1000 hotels and travel services. The study found that government regulations restricting the firm rivalry and the shortage of competent managerial talents are among the most serious constraints to the firms'' development of market orientation along with such factors as inadequacy of government regulation on product quality and consumer protection. The findings suggest that in transitional like China, government actions could be a major force behind firms'' aspiration of being market-oriented. The study also found that the benefits of market orientation are multi-fold in that it not only improves company''s business performance but also has positive effects on customer satisfaction/retention, power in distribution channel, and corporate social responsibility.

Testing for financial crashes using the Log Periodic Power Law model

Many papers claim that a Log Periodic Power Law (LPPL) model fitted to financial market bubbles that precede large market falls or 'crashes', contains parameters that are confined within certain ranges. Further, it is claimed that the underlying model is based on influence percolation and a martingale condition. This paper examines these claims and their validity for capturing large price falls in the Hang Seng stock market index over the period 1970 to 2008. The fitted LPPLs have parameter values within the ranges specified post hoc by Johansen and Sornette (2001) for only seven of these 11 crashes. Interestingly, the LPPL fit could have predicted the substantial fall in the Hang Seng index during the recent global downturn. Overall, the mechanism posited as underlying the LPPL model does not do so, and the data used to support the fit of the LPPL model to bubbles does so only partially. © 2013.

Decision support for lifecycle planning and risk management of small-scale biomass combined heat and power (bCHP) projects in the UK

Biomass is projected to account for approximately half of the new energy production required to achieve the 2020 primary energy target in the UK. Combined heat and power (CHP) bioenergy systems are not only a highly efficient method of energy conversion, at smaller-scales a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost incumbent; a high carbon centralised energy system. Unidentified or unmitigated barriers occurring during the project lifecycle may not only negatively impact on the project but could ultimately lead to project failure. The research develops a decision support system (DSS) for small-scale (500 kWe to 10 MWe) biomass combustion CHP project development and risk management in the early stages of a potential project’s lifecycle. By supporting developers in the early stages of project development with financial, scheduling and risk management analysis, the research aims to reduce the barriers identified and streamline decision-making. A fuzzy methodology is also applied throughout the developed DSS to support developers in handling the uncertain or approximate information often held at the early stages of the project lifecycle. The DSS is applied to a case study of a recently failed (2011) small-scale biomass CHP project to demonstrate its applicability and benefits. The application highlights that the proposed development within the case study was not viable. Moreover, further analysis of the possible barriers with the DSS confirmed that some possible modifications to be project could have improved this, such as a possible change of feedstock to a waste or residue, addressing the unnecessary land lease cost or by increasing heat utilisation onsite. This analysis is further supported by a practitioner evaluation survey that confirms the research contribution and objectives are achieved.

A barrier and techno-economic analysis of small-scale bCHP (biomass combined heat and power) schemes in the UK

bCHP (Biomass combined heat and power) systems are highly efficient at smaller-scales when a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost fossil fuel incumbent. The paper reviews the barriers to small-scale bCHP project development in the UK along with a case study of a failed 1.5MWel bCHP scheme. The paper offers possible explanations for the project's failure and suggests adaptations to improve the project resilience. Analysis of the project's: capital structuring contract length and bankability; feedstock type and price uncertainty, and plant oversizing highlight the negative impact of the existing project barriers on project development. The research paper concludes with a discussion on the effects of these barriers on the case study project and this industry more generally. A greater understanding of the techno-economic effects of some barriers for small-scale bCHP schemes is demonstrated within this paper, along with some methods for improving the attractiveness and resilience of projects of this kind. © 2014 Elsevier Ltd.

A techno-economic comparison of power production by biomass fast pyrolysis with gasification and combustion

This paper presents an assessment of the technical and economic performance of thermal processes to generate electricity from a wood chip feedstock by combustion, gasification and fast pyrolysis. The scope of the work begins with the delivery of a wood chip feedstock at a conversion plant and ends with the supply of electricity to the grid, incorporating wood chip preparation, thermal conversion, and electricity generation in dual fuel diesel engines. Net generating capacities of 1–20 MWe are evaluated. The techno-economic assessment is achieved through the development of a suite of models that are combined to give cost and performance data for the integrated system. The models include feed pretreatment, combustion, atmospheric and pressure gasification, fast pyrolysis with pyrolysis liquid storage and transport (an optional step in de-coupled systems) and diesel engine or turbine power generation. The models calculate system efficiencies, capital costs and production costs. An identical methodology is applied in the development of all the models so that all of the results are directly comparable. The electricity production costs have been calculated for 10th plant systems, indicating the costs that are achievable in the medium term after the high initial costs associated with novel technologies have reduced. The costs converge at the larger scale with the mean electricity price paid in the EU by a large consumer, and there is therefore potential for fast pyrolysis and diesel engine systems to sell electricity directly to large consumers or for on-site generation. However, competition will be fierce at all capacities since electricity production costs vary only slightly between the four biomass to electricity systems that are evaluated. Systems de-coupling is one way that the fast pyrolysis and diesel engine system can distinguish itself from the other conversion technologies. Evaluations in this work show that situations requiring several remote generators are much better served by a large fast pyrolysis plant that supplies fuel to de-coupled diesel engines than by constructing an entire close-coupled system at each generating site. Another advantage of de-coupling is that the fast pyrolysis conversion step and the diesel engine generation step can operate independently, with intermediate storage of the fast pyrolysis liquid fuel, increasing overall reliability. Peak load or seasonal power requirements would also benefit from de-coupling since a small fast pyrolysis plant could operate continuously to produce fuel that is stored for use in the engine on demand. Current electricity production costs for a fast pyrolysis and diesel engine system are 0.091/kWh at 1 MWe when learning effects are included. These systems are handicapped by the typical characteristics of a novel technology: high capital cost, high labour, and low reliability. As such the more established combustion and steam cycle produces lower cost electricity under current conditions. The fast pyrolysis and diesel engine system is a low capital cost option but it also suffers from relatively low system efficiency particularly at high capacities. This low efficiency is the result of a low conversion efficiency of feed energy into the pyrolysis liquid, because of the energy in the char by-product. A sensitivity analysis has highlighted the high impact on electricity production costs of the fast pyrolysis liquids yield. The liquids yield should be set realistically during design, and it should be maintained in practice by careful attention to plant operation and feed quality. Another problem is the high power consumption during feedstock grinding. Efficiencies may be enhanced in ablative fast pyrolysis which can tolerate a chipped feedstock. This has yet to be demonstrated at commercial scale. In summary, the fast pyrolysis and diesel engine system has great potential to generate electricity at a profit in the long term, and at a lower cost than any other biomass to electricity system at small scale. This future viability can only be achieved through the construction of early plant that could, in the short term, be more expensive than the combustion alternative. Profitability in the short term can best be achieved by exploiting niches in the market place and specific features of fast pyrolysis. These include: •countries or regions with fiscal incentives for renewable energy such as premium electricity prices or capital grants; •locations with high electricity prices so that electricity can be sold direct to large consumers or generated on-site by companies who wish to reduce their consumption from the grid; •waste disposal opportunities where feedstocks can attract a gate fee rather than incur a cost; •the ability to store fast pyrolysis liquids as a buffer against shutdowns or as a fuel for peak-load generating plant; •de-coupling opportunities where a large, single pyrolysis plant supplies fuel to several small and remote generators; •small-scale combined heat and power opportunities; •sales of the excess char, although a market has yet to be established for this by-product; and •potential co-production of speciality chemicals and fuel for power generation in fast pyrolysis systems.

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.

Optimising market share and profit margin:SMDP-based tariff pricing under the smart grid paradigm

Smart grid technologies have given rise to a liberalised and decentralised electricity market, enabling energy providers and retailers to have a better understanding of the demand side and its response to pricing signals. This paper puts forward a reinforcement-learning-powered tool aiding an electricity retailer to define the tariff prices it offers, in a bid to optimise its retail strategy. In a competitive market, an energy retailer aims to simultaneously increase the number of contracted customers and its profit margin. We have abstracted the problem of deciding on a tariff price as faced by a retailer, as a semi-Markov decision problem (SMDP). A hierarchical reinforcement learning approach, MaxQ value function decomposition, is applied to solve the SMDP through interactions with the market. To evaluate our trading strategy, we developed a retailer agent (termed AstonTAC) that uses the proposed SMDP framework to act in an open multi-agent simulation environment, the Power Trading Agent Competition (Power TAC). An evaluation and analysis of the 2013 Power TAC finals show that AstonTAC successfully selects sell prices that attract as many customers as necessary to maximise the profit margin. Moreover, during the competition, AstonTAC was the only retailer agent performing well across all retail market settings.

A hatalmi viszonyok a világgazdaság és a katonai szektor a XXI. században = Power relations in the world economy and the military sector in 21st century

A bipoláris világrendszer megszűnése a XX. század utolsó évtizedében új helyzetet teremtett a globális politikai és gazdasági viszonyokban, ugyanakkor nem mellékesen a hadiiparban is. A szerző, szem előtt tartva a hatalmi viszonyok jövőbeli elkerülhetetlen átrendeződését, elsősorban a katonai szektor előtt álló, a XXI. századra előrevetíthető kihívásokat, lehetőségeket, a szektor jövőbeli pályáját tekinti át. A hadiiparral kapcsolatban indokolt a hidegháború utáni világ fegyverkezési helyzetének, fegyveres erőinek számbavétele csakúgy, mint a releváns elméleti keretek ismertetése, továbbá a fontos globális szereplők biztonságpolitikájának vizsgálata. A katonai szektor jelenének és jövőjének alapos elemzése nem nélkülözheti a katonai kiadások jelenlegi – a világgazdasági válság által befolyásolt – és a következő évtizedekben várható alakulásának vizsgálatát. Végül, de nem utolsó sorban a szerző áttekinti a XXI. századi haditechnikai forradalom már most látható és a jövőben valószínűsíthető vívmányait, a fontosabb haditechnikai tendenciákat, illetve elemzi a nemzetközi fegyverpiac helyzetét. __________________ The end of the Cold War led to a new situation in global political and economic affairs, as well as in the military sector. The author, taking into consideration the inevitable future power shifts, provides an overview of the challenges, possibilities and future paths of the military sector. Relevant issues include assessing the arms and armed forces of the post-Cold War era, as well as the analysis of theoretical frameworks and the security policies of the important global actors. Understanding the present and the future of the military sector is not possible without the thorough analysis of military expenditures and their likely future trends. The author also overviews the outcomes of the 21st century revolution in military technology and analyses the global arms market.

A villamos erőművek szén-dioxid-kibocsátásának modellezése reálopciók segítségével = Modelling of the carbon dioxide emissions of a power plant, using real options

A szerző egy, a szennyezőanyag-kibocsátás európai kereskedelmi rendszerében megfelelésre kötelezett gázturbinás erőmű szén-dioxid-kibocsátását modellezi négy termékre (völgy- és csúcsidőszaki áramár, gázár, kibocsátási kvóta) vonatkozó reálopciós modell segítségével. A profitmaximalizáló erőmű csak abban az esetben termel és szennyez, ha a megtermelt áramon realizálható fedezete pozitív. A jövőbeli időszak összesített szén-dioxid-kibocsátása megfeleltethető európai típusú bináris különbözetopciók összegének. A modell keretein belül a szén-dioxid-kibocsátás várható értékét és sűrűségfüggvényét becsülhetjük, az utóbbi segítségével a szén-dioxid-kibocsátási pozíció kockáztatott értékét határozhatjuk meg, amely az erőmű számára előírt megfelelési kötelezettség teljesítésének adott konfidenciaszint melletti költségét jelenti. A sztochasztikus modellben az alaptermékek geometriai Ornstein-Uhlenbeck-folyamatot követnek. Ezt illesztette a szerző a német energiatőzsdéről származó publikus piaci adatokra. A szimulációs modellre támaszkodva megvizsgálta, hogy a különböző technológiai és piaci tényezők ceteris paribus megváltozása milyen hatással van a megfelelés költségére, a kockáztatott értékére. ______ The carbon-dioxide emissions of an EU Emissions Trading System participant, gas-fuelled power generator are modelled by using real options for four underlying instruments (peak and off-peak electricity, gas, emission quota). This profit-maximizing power plant operates and emits pollution only if its profit (spread) on energy produced is positive. The future emissions can be estimated by a sum of European binary-spread options. Based on the real-option model, the expected value of emissions and its probability-density function can be deducted. Also calculable is the Value at Risk of emission quota position, which gives the cost of compliance at a given confidence level. To model the prices of the four underlying instruments, the geometric Ornstein-Uhlenbeck process is supposed and matched to public available price data from EEX. Based on the simulation model, the effects of various technological and market factors are analysed for the emissions level and the cost of compliance.

Market-Driven Hotel Brands: Linking Market Orientation, Innovation, and Performance

"Market orientation" is a term popularized by marketing practitioners to indicate the extent to which a firm is market driven. This presumed linkage between market orientation and profitability has caught the attention of scholars, but, surprisingly, only two prior studies have reported a positive association between the two. Given the special relevance to the hotel industry of being market driven, we believe this industry provides the ideal setting for demonstrating the link between market orientation and performance. This research examines this linkage in the hotel industry. The results of our study suggest that market orientation is positively and significantly related to innovation, subjective performance, and objective performance. This result yields a number of useful ideas about how to harness the power of the marketing concept.

The market value implications of pension asset allocation

Pension funds have been part of the private sector since the 1850's. Defined Benefit pension plans [DB], where a company promises to make regular contributions to investment accounts held for participating employees in order to pay a promised lifelong annuity, are significant capital markets participants, amounting to 2.3 trillion dollars in 2010 (Federal Reserve Board, 2013). In 2006, Statement of Financial Accounting Standards No.158 (SFAS 158), Employers' Accounting for Defined Benefit Pension and Other Postemployment Plans, shifted information concerning funding status and pension asset/liability composition from disclosure in the footnotes to recognition in the financial statements. I add to the literature by being the first to examine the effect of recent pension reform during the financial crisis of 2008-09. This dissertation is comprised of three related essays. In my first essay, I investigate whether investors assign different pricing multiples to the various classes of pension assets when valuing firms. The pricing multiples on all classes of assets are significantly different from each other, but only investments in bonds and equities were value-relevant during the recent financial crisis. Consistent with investors viewing pension liabilities as liabilities of the firm, the pricing multiples on pension liabilities are significantly larger than those on non-pension liabilities. The only pension costs significantly associated with firm value are actual rate of return and interest expense. In my second essay, I investigate the role of accruals in predicting future cash flows, extending the Barth et al. (2001a) model of the accrual process. Using market value of equity as a proxy for cash flows, the results of this study suggest that aggregate accounting amounts mask how the components of earnings affect investors' ability to predict future cash flows. Disaggregating pension earnings components and accruals results in an increase in predictive power. During the 2008-2009 financial crisis, however, investors placed a greater (and negative) weight on the incremental information contained in the individual components of accruals. The inferences are robust to alternative specifications of accruals. Finally, in my third essay I investigate how investors view under-funded plans. On average, investors: view deficits arising from under-funded plans as belonging to the firm; reward firms with fully or over-funded pension plans; and encourage those funds with unfunded pension plans to become funded. Investors also encourage conservative pension asset allocations to mitigate firm risk, and smaller firms are perceived as being better able to handle the risk associated with underfunded plans. During the financial crisis of 2008-2009 underfunded status had a lower negative association with market value. In all three models, there are significant differences in pre- and post- SFAS 158 periods. These results are robust to various scenarios of the timing of the financial crisis and an alternative measure of funding.

Does market upgrading benefit farmers? : market differentiation, contract farming, and professional cooperatives in China's pork processing industry

This study tested whether contract farming or farmers professional cooperatives (FPCs) improved the social benefit of pork production and income of breeding farmers in China. The main concern of this study is whether institutional arrangement like contract farming or FPCs actually improved the welfare of farmers as expected. To answer this question accurately, we estimated the differentiated market demand of pork products in order to quantify the benefit by transaction types. Our study finds that contract farming or FPCs improved the benefits of pork products, but farmer's income remained lower than that of traditional transaction types. This finding is new in terms of quantifying distribution of the economic values among sales outlets, agro-firms and farmers. It is more reliable because it explicitly captures impacts from both demand side and supply side by structural estimation. In practice, we need to keep it mind the bargaining power of small farmers will not improve instantly even when the contract farming or FPCs are introduced.

The Market for Apples: A Theory of Identity and Consumption

This paper presents an economic model of the effects of identity and social norms on consumption patterns. By incorporating qualitative studies in psychology and sociology, I propose a utility function that features two components – economic (functional) and identity elements. This setup is extended to analyze a market comprising a continuum of consumers, whose identity distribution along a spectrum of binary identities is described by a Beta distribution. I also introduce the notion of salience in the context of identity and consumption decisions. The key result of the model suggests that fundamental economic parameters, such as price elasticity and market demand, can be altered by identity elements. In addition, it predicts that firms in perfectly competitive markets may associate their products with certain types of identities, in order to reduce product substitutability and attain price-setting power.