Influência da utilização do fluido de corte com adição de grafeno na temperatura de usinagem e formação de rebarba no processo de micro fresamento

As time passed, humanity needed the development of new materials used in various activities. High strength materials such as titanium and Inconel for example, had been studied because they are widely used for implants in biomedicine, as well as their use in aerospace and automotive industries. Because of its thermal and mechanical properties, these materials are considered difficult to machine, promoting a rapid wear of cutting tools, primarily caused by the high temperatures in machining. With the development of new materials has emerged the need of developing new manufacturing processes. One of today’s innovative processes is the micro-manufacturing. Being a process with a defined cutting tool geometry, burr formation is a constant and undesirable phenomenon formed during the machininig process. Being detrimental to the manufacturing process, overspending deburring operations are constantly employed leading to increase the aggregate cost to the manufactured material. Assembly components are also impaired if there is no control of the burr, with consequences including the disposal of components due to the occurence of this phenomenon. This paper presents the study of micro-milling Inconel 718, investigating influential parameters in the formation of burrs in order to minimize the occurrence of this phenome non. Different feed rates per tooth and cutting speed are evaluated, and different cutting fluids with different methods of applying the fluid. Adding graphene to cutting fluids was considered as a variable to be investigated, which is considered an excellent solid lubricant, in addition to increasing the thermal conductivity of the cooling solution (AZIMI; MOZAF FARI, 2015). The micro-milling temperature was evaluated in the present work. It was observed a new phenomenon that causes the machined surface temperature decreases below room temperature when using the solution water + oil. This phenomenon is explained in further chapters. In order to unravel this phenomenon, a new test was proposed and, from this test, it can be concluded, comparatively, which cutting fluid has a better cooling property.Using cutting fluid with different thermal properties has shown influence when analy zing burr formation and reducing machining temperature.

High accuracy mobile robot positioning using an external large volume metrology instrument

A method of accurately controlling the position of a mobile robot using an external Large Volume Metrology (LVM) instrument is presented in this paper. Utilizing a LVM instrument such as the laser tracker in mobile robot navigation, many of the most difficult problems in mobile robot navigation can be simplified or avoided. Using the real- Time position information from the laser tracker, a very simple navigation algorithm, and a low cost robot, 5mm repeatability was achieved over a volume of 30m radius. A surface digitization scan of a wind turbine blade section was also demonstrated, illustrating possible applications of the method for manufacturing processes. © Springer-Verlag Berlin Heidelberg 2010.

Optical fiber sensors embedded in flexible polymer foils

In traditional electrical sensing applications, multiplexing and interconnecting the different sensing elements is a major challenge. Recently, many optical alternatives have been investigated including optical fiber sensors of which the sensing elements consist of fiber Bragg gratings. Different sensing points can be integrated in one optical fiber solving the interconnection problem and avoiding any electromagnetical interference (EMI). Many new sensing applications also require flexible or stretchable sensing foils which can be attached to or wrapped around irregularly shaped objects such as robot fingers and car bumpers or which can even be applied in biomedical applications where a sensor is fixed on a human body. The use of these optical sensors however always implies the use of a light-source, detectors and electronic circuitry to be coupled and integrated with these sensors. The coupling of these fibers with these light sources and detectors is a critical packaging problem and as it is well-known the costs for packaging, especially with optoelectronic components and fiber alignment issues are huge. The end goal of this embedded sensor is to create a flexible optical sensor integrated with (opto)electronic modules and control circuitry. To obtain this flexibility, one can embed the optical sensors and the driving optoelectronics in a stretchable polymer host material. In this article different embedding techniques for optical fiber sensors are described and characterized. Initial tests based on standard manufacturing processes such as molding and laser structuring are reported as well as a more advanced embedding technique based on soft lithography processing.

Large volume metrology process model:measurability analysis with integration of metrology classification model and feature-based selection model

Aircraft manufacturing industries are looking for solutions in order to increase their productivity. One of the solutions is to apply the metrology systems during the production and assembly processes. Metrology Process Model (MPM) (Maropoulos et al, 2007) has been introduced which emphasises metrology applications with assembly planning, manufacturing processes and product designing. Measurability analysis is part of the MPM and the aim of this analysis is to check the feasibility for measuring the designed large scale components. Measurability Analysis has been integrated in order to provide an efficient matching system. Metrology database is structured by developing the Metrology Classification Model. Furthermore, the feature-based selection model is also explained. By combining two classification models, a novel approach and selection processes for integrated measurability analysis system (MAS) are introduced and such integrated MAS could provide much more meaningful matching results for the operators. © Springer-Verlag Berlin Heidelberg 2010.

The Philippines in the Aerospace Global Value Chain

This report uses the Duke CGGC Global Value Chain (GVC) framework to examine the role of the Philippines in the global aerospace industry and identify opportunities for the country to upgrade. The Philippines is a newcomer to the growing global aerospace manufacturing industry. Although the country has been host to a major flight controls manufacturer since 1985, the industry really only began to expand within the past five to ten years. During this recent period (2007-2014), the country has rapidly ramped up its aerospace manufacturing exports, reaching US$604 million in 2014 and more than tripling employment. The industry now employs 3,000 full time and 3,000 part time workers. Although still a very small player, accounting for less than 0.15% of the global industry, this incipient growth is promising. Both foreign firms and local suppliers that have established operations in the industry have already achieved some degree of upgrading within a short timeframe. These include expanding the product lines served, obtaining essential process certifications and upgrading beyond basic assembly operations to undertake additional manufacturing processes such as machining as well as initiating procurement and engineering functions in country.

Development of InAlN HEMTs for space application

This thesis investigates the emerging InAlN high electron mobility transistor (HEMT) technology with respect to its application in the space industry. The manufacturing processes and device performance of InAlN HEMTs were compared to AlGaN HEMTs, also produced as part of this work. RF gain up to 4 GHz was demonstrated in both InAlN and AlGaN HEMTs with gate lengths of 1 μm, with InAlN HEMTs generally showing higher channel currents (~150 c.f. 60 mA/mm) but also degraded leakage properties (~ 1 x 10-4 c.f. < 1 x 10-8 A/mm) with respect to AlGaN. An analysis of device reliability was undertaken using thermal stability, radiation hardness and off-state breakdown measurements. Both InAlN and AlGaN HEMTs showed excellent stability under space-like conditions, with electrical operation maintained after exposure to 9.2 Mrad of gamma radiation at a dose rate of 6.6 krad/hour over two months and after storage at 250°C for four weeks. Furthermore a link was established between the optimisation of device performance (RF gain, power handling capabilities and leakage properties) and reliability (radiation hardness, thermal stability and breakdown properties), particularly with respect to surface passivation. Following analysis of performance and reliability data, the InAlN HEMT device fabrication process was optimised by adjusting the metal Ohmic contact formation process (specifically metal stack thicknesses and anneal conditions) and surface passivation techniques (plasma power during dielectric layer deposition), based on an existing AlGaN HEMT process. This resulted in both a reduction of the contact resistivity to around 1 x 10-4 Ω.cm2 and the suppression of degrading trap-related effects, bringing the measured gate-lag close to zero. These discoveries fostered a greater understanding of the physical mechanisms involved in device operation and manufacture, which is elaborated upon in the final chapter.

Process Selection Using Variation and Cost Relations

Variations are inherent in all manufacturing processes and can significantly affect the quality of a final assembly, particularly in multistage assembly systems. Existing research in variation management has primarily focused on incorporating GD&T factors into variation propagation models in order to predict product quality and allocate tolerances. However, process induced variation, which has a key influence on process planning, has not been fully studied. Furthermore, the link between variation and cost has not been well established, in particular the effect that assembly process selection has on the final quality and cost of a product. To overcome these barriers, this paper proposes a novel method utilizing process capabilities to establish the relationship between variation and cost. The methodology is discussed using a real industrial case study. The benefits include determining the optimum configuration of an assembly system and facilitating rapid introduction of novel assembly techniques to achieve a competitive edge.

Banana and abaca fiber-reinforced plastic composites obtained by rotational molding process

Natural fibers can be used in rotational molding process to obtain parts with improved mechanical properties. Different approaches have been followed in order to produce formulations containing banana or abaca fiber at 5% weight, in two- and three-layer constructions. Chemically treated abaca fiber has also been studied, causing some problems in processability. Fibers used have been characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), optical microscopy, and single-fiber mechanical tests. Rotomolded parts have been tested for tensile, flexural, and impact properties, demonstrating that important increases in elastic modulus are achieved with these fibers, although impact properties are reduced. © 2013 Copyright Taylor and Francis Group, LLC.

Propriedades óticas dos sistemas cerâmicos atuais e suas aplicações em dentes naturais

A estética representa uma qualidade cada vez mais requisitada pela sociedade na atualidade. A busca pela aparência ideal expandiu-se também na medicina dentária, aumentando as exigências por resultados perfeitos. A medicina dentária tem desenvolvido novas técnicas e novos materiais com a ambição de reproduzir as propriedades estéticas e funcionais dos dentes naturais. Os sistemas totalmente cerâmicos têm sido alvo de grande entusiasmo dado as suas características inerentes. O seu potencial na reabilitação oral estética tem derrotado as suas antecessoras metalocerâmicas. À semelhança do esmalte e da dentina, os sistemas totalmente cerâmicos exibem boas propriedades óticas de translucidez, opacidade, fluorescência e opalescência, resultado da interação com a luz. Ainda que não seja possível dissociar as propriedades óticas das propriedades mecânicas de um dente natural para o sucesso de uma restauração, a heterogeneidade das cerâmicas têm sido exitosas enquanto sistema que combina diferentes propriedades para diferentes indicações clínicas. Esta variabilidade deve-se a diferentes composições químicas e a diferentes processos de fabricação, entre outros, que acentuam ou atenuam qualidades em cada sistema totalmente cerâmico. Este trabalho pretende abordar e comparar os sistemas cerâmicos atuais (cerâmicas com base em sílica, cerâmicas com base de alumina, cerâmicas com base em zircónia) de acordo com as suas propriedades óticas e a consequente aplicação clínica tendo em conta as características dos dentes naturais.

Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools

The machining of hardened steel is becoming increasingly important in manufacturing processes. Machined parts made with hardened steel are often subjected to high service demands, which require great resistance and quality. The machining of this material submits the tools to high mechanical and thermal loads, which increases the tool wear and affects the surface integrity of the part. In that context, this work presents a study of drilling of AISI P20 steel with carbide tools, analyzing the effects on the process caused by the reduction of cutting fluid supply and its relation with the tool wear and the surface integrity of the piece. The major problem observed in the tests was a difficulty for chips to flow through the drill flute, compromising their expulsion from the hole. After a careful analysis, a different machining strategy was adopted to solve the problem

Estudo do defeito de ligação da asa em louça de porcelana

Este relatório descreve o trabalho realizado durante um estágio na empresa Vista Alegre Atlantis. Neste estágio, propunha-se diminuir ou eliminar um problema, um defeito observado como a asa descolada numa chávena de porcelana. Através do estudo das fases do processo de fabrico das chávenas, que se focou na conformação das asas e na secagem, concluiu-se que se tratava de um problema na conformação, relacionado com as propriedades da pasta utilizada para a conformação, recorrendo-se a uma pasta de porcelana com propriedades diferentes. Neste trabalho é apresentado o problema em estudo, o material (a porcelana), incluindo as suas propriedades, as matérias-primas e os processos utilizados para produzir as peças estudadas. Apresentam-se os procedimentos usados para estudar o material e o problema, os resultados obtidos e as conclusões tiradas da discussão dos dados e observações. Adicionalmente, é apresentado trabalho relevante efetuado durante o estágio, em especial aquele relacionado com as chávenas de porcelana.

Projeto de uma ferramenta específica para cravação de terminais elétricos

A necessidade contínua de incrementar a produtividade em todos os sectores leva a que sejam utilizados equipamentos cada vez mais sofisticados, permitindo novas técnicas de abordagem dos processos de fabrico, velocidades mais elevadas e maior precisão no produto final. No entanto, quase todos os equipamentos necessitam de ferramentas adequadas, que tirem partido efetivamente das potencialidades dos equipamentos disponíveis. A Engenharia tem aqui um papel extremamente importante, já que terá de conceber as ferramentas atendendo à satisfação de um elevado número de requisitos, que passam genericamente por tirar o máximo partido dos fatores tecnológicos proporcionados pelos equipamentos, cumprir com a cadência de produção necessária, assegurar a qualidade estipulada, garantir a segurança dos colaboradores que com ela trabalham e permitir uma fácil montagem e afinação, reduzindo assim os tempos de preparação e as possibilidades de fabrico de peças fora das especificações. Este trabalho foi desenvolvido em torno de uma necessidade real, tendo sido estipulados os requisitos necessários pelo cliente e tendo sido elaborado todo o projeto da ferramenta em torno desses mesmos requisitos. Foi efetuada uma otimização da ferramenta ainda na fase de anteprojeto, permitindo minimizar o seu custo e maximizar o seu rendimento e aptidão para o fim em vista. Os materiais foram cuidadosamente selecionados, tendo em vista a utilização de cada componente e a relação custo‐benefício. Foi ainda efetuada uma orçamentação da mesma, assim como um plano de instruções para a operação e manutenção da ferramenta. Deste modo, este trabalho é o resumo de grande parte do conhecimento adquirido, quer ao longo da vida académica, quer ao longo da experiência profissional.

Projecto e Implementação de Sistema de Alimentação Automática para Forno de Apoio à Injecção de Zamak

A injecção de Zamak em Portugal é uma actividade corrente, sendo usada na produção de inúmeras peças de pequena dimensão, nomeadamente em acessórios de vestuário, no fabrico de cablagens metálicas para a indústria automóvel, no fabrico de placas indicativas de marcas nos mais diversos produtos, entre muitas outras aplicações. Quando a quantidade de Zamak injectada em cada ciclo é relativamente baixa, o tempo que demora a consumir um lingote é bastante longo, pelo que não se justifica que o forno esteja equipado com um sistema de alimentação automática de lingotes. No entanto, quando as peças injectadas possuem uma maior massa ou o número de cavidades por molde é maior, um lingote pode ser consumido num período de tempo suficientemente curto para ser necessário um operário permanentemente atento à alimentação do forno. Neste caso, justifica-se a inclusão de um sistema automático que vá descarregando lingotes à medida que aquele que está a abastecer o forno é consumido. O presente trabalho foi elaborado com base na necessidade de uma empresa fabricante de máquinas para a injecção de Zamak, a qual pretendia dotar alguns dos seus modelos com este sistema, indo de encontro às necessidades dos seus clientes e ampliando a gama de acessórios que passa a poder disponibilizar em torno de cada equipamento.

A Risk Analysis Method to Support Virtual Organization Partners’ Selection

Part 17: Risk Analysis

Conceptual Reference Model for Virtual Factory: Potentials for Collaborative Business

Part 11: Reference and Conceptual Models