Primary production and nutrient fluxes of the nothern coast of Peru: a summary

Analise the distribution and magnitude of primary measured during the 1977 ICANE cruise of the northern coast of Peru

The State of the Judiciary, 2009

Thank you for inviting me again this year to talk with you about the condition of Iowa’s judicial branch. As your partner in government, we look forward to working with you on issues affecting the administration of justice. If I could capture the condition of our courts, indeed the condition of our state, in a few words, it would be: “We live in challenging times.” No one knows the true meaning of this phrase better than those Iowans hit by natural disasters. But my focus today is, of course, on the courts. Ensuring the delivery of equal, affordable and accessible justice is always challenging work, but it will be especially so this year and the next in light of the State’s budget problems. Given the magnitude of this challenge, it is even more imperative that we work together in the spirit of unity, candor and cooperation. And I address you today in this spirit. We are deeply concerned, as you are, about the present financial situation and its effect on individual Iowans. Naturally, we are particularly troubled about its impact on the delivery of justice to our citizens. Even in good economic times, the administration of justice is difficult to fulfill given the sheer volume and complexity of problems Iowans bring to their courthouses. Because of the effects of the nation’s economic downturn, people will need access to justice now more than ever. We already see this happening. The number of mortgage foreclosure cases in Iowa rose 14% in the past year. Debt collection cases increased 20% in the same time. An increase in these types of cases is predictable in tough economic times, but other types of problems may escalate as well. Some experts fear that a recession may also give rise to more crime, child abuse, domestic violence, and substance abuse. Naturally, for the sake of the people who may be harmed by these problems, we hope they do not occur. If they do, however, these matters will demand our immediate attention.

Inflammation and TCR Signal Strength Determine the Breadth of the T Cell Response in a Bim-Dependent Manner.

Generating a diverse T cell memory population through vaccination is a promising strategy to overcome pathogen epitope variability and tolerance to tumor Ags. The effector and memory pool becomes broad in TCR diversity by recruiting high- and low-affinity T cells. We wanted to determine which factors dictate whether a memory T cell pool has a broad versus focused repertoire. We find that inflammation increases the magnitude of low- and high-affinity T cell responses equally well, arguing against a synergistic effect of TCR and inflammatory signals on T cell expansion. We dissect the differential effects of TCR signal strength and inflammation and demonstrate that they control effector T cell survival in a bim-dependent manner. Importantly, bim-dependent cell death is overcome with a high Ag dose in the context of an inflammatory environment. Our data define the framework for the generation of a broad T cell memory pool to inform future vaccine design.

Photometric and spectroscopic survey of the cluster of galaxies Abell A2218

We present new photometric and spectroscopic observations of objects in the field of the cluster of galaxies Abell 2218. The photometric survey, centered on the cluster core, extends to a field of about 4 x 4 arcmin. It was performed in 5 bands (B,g,r,i and z filters). This sample, which includes 729 objects, is about three times larger than the survey made by Butcher and collaborators (Butcher et al., 1983, Butcher and Oemler, 1984) in the same central region of the field. Only 228 objects appear in both catalogues since our survey covers a smaller region. The spectral range covered by our filters is wider and the photometry is much deeper, up to magnitude 27 in r. The spectroscopic survey concerns 66 objects, on a field comparable to that of Butcher and collaborators. From our observations we calculate the mean redshift of the cluster, 0.1756, and its velocity dispersion, 1370 km/s. The spectral types are determined for many galaxies in the sample by comparing their spectra with synthetic ones from Rocca-Volmerange and Guiderdoni (1988).

Nanoscale electrical conductivity of the purple membrane monolayer

Nanoscale electron transport through the purple membrane monolayer, a two-dimensional crystal lattice of the transmembrane protein bacteriorhodopsin, is studied by conductive atomic force microscopy. We demonstrate that the purple membrane exhibits nonresonant tunneling transport, with two characteristic tunneling regimes depending on the applied voltage (direct and Fowler-Nordheim). Our results show that the purple membrane can carry significant current density at the nanometer scale, several orders of magnitude larger than previously estimated by macroscale measurements.

Molecular genetic approaches to the biology of the moss "Physcomitrella patens"

La mousse haplobiontique Physcomitrella patens est utilisée comme système génétique modèle pour l'étude du développement des plantes. Cependant, l'absence d'un protocole efficace de transformation a constitué jusqu'à présent un gros désavantage méthodologique pour le développement futur de ce système expérimental. Les résultats présentés dans le premier chapitre relatent la mise au point d'un protocole de transformation basé sur la technique de transfert direct de gènes dans des protoplastes par précipitation au PEG. Un essai d'expression transitoire de gènes a été mis au point. Ce protocole a été adapté afin de permettre l'introduction in vivo d'anticorps dans des protoplastes. Le protocole modifié permet d'introduire simultanément du DNA et des IgG dans les cellules, et nous avons démontré que ces anticorps peuvent inactiver spécifiquement le produit d'un gène co-introduit (GUS), ainsi que certaines protéines impliquées dans des processus cellulaires (tubuline). Cet essai, baptisé "essai transitoire d'immuno-inactivation in vivo", devrait être directement applicable à d'autres protoplastes végétaux, et permettre l'élaboration de nouvelles stratégies dans l'étude de processus cellulaires. Le second chapitre est consacré aux expériences de transformation de la mousse avec des gènes conférant une résistance à des antibiotiques. Nos résultats démontrent que l'intégration de gènes de résistance dans le génome de P. patens est possible, mais que cet événement est rare. Il s'agit là néanmoins de la première démonstration d'une transformation génétique réussie de cet organisme. L'introduction de gènes de résistance aux antibiotiques dans les protoplastes de P. patens génère à haute fréquence des clones résistants instables. Deux classes de clones instables ont été identifiés. La caractérisation phénotypique, génétique et moléculaire de ces clones suggère fortement que les séquences transformantes sont concaténées pour former des structures de haut poids moléculaire, et que ces structures sont efficacement répliquées et maintenues dans les cellules résistantes en tant qu'éléments génétiques extrachromosomaux. Ce type de transformation nous permet d'envisager des expériences permettant l'identification des séquences génomiques impliquées dans la replication de l'ADN de mousse. Plusieurs lignées transgéniques ont été retransformées avec des plasmides portant des séquences homologues aux séquences intégrées dans le génome, mais conférant une résistance à un autre antibiotique. Les résultats présentés dans le troisième chapitre montrent que les fréquences de transformation intégrative dans les lignées transgéniques sont 10 fois plus élevées que dans la lignée sauvage, et que cette augmentation est associée à une coségrégation des gènes de résistance dans la plupart des clones testés. Ces résultats génétiques indiquent que l'intégration de séquences d'ADN étranger dans le génome de P. patens a lieu en moyenne 10 fois plus fréquemment par recombinaison homologue que par intégration aléatoire. Ce rapport homologue/aléatoire est 10000 fois supérieur aux rapports obtenus avec d'autres plantes, et fournit l'outil indispensable à la réalisation d'expériences de génétique inverse dans cet organisme à haplophase dominante. THESIS SUMMARY The moss Physcomitrella patens is used as a model genetic system to study plant development, taking advantage of the fact that the haploid gametophyte dominates in its life cycle. But further development of this model system was hampered by the lack of a protocol allowing the genetic transformation of this plant. We have developed a transformation protocol based on PEG-mediated direct gene transfer to protoplasts. Our data demonstrate that this procedure leads to the establishment of an efficient transient gene expression assay. A slightly modified protocol has been developed allowing the in vivo introduction of antibodies in moss protoplasts. Both DNA and IgGs can be loaded simultaneously, and specific antibodies can immunodeplete the product of an expression cassette (GUS) as well as proteins involved in cellular processes (tubulins). This assay, named transient in vivo immunodepletion assay, should be applicable to other plant protoplasts, and offers new approaches to study cellular processes. Transformations have been performed with bacterial plasmids carrying antibiotic resistance expression cassette. Our data demonstrate that integrative transformation occurs, but at low frequencies. This is the first demonstration of a successful genetic transformation of mosses. Resistant unstable colonies are recovered at high frequencies following transformation, and two different classes of unstable clones have been identified. Phenotypical, genetic and molecular characterisation of these clones strongly suggests that bacterial plasmids are concatenated to form high molecular arrays which are efficiently replicated and maintained as extrachromosomal elements in the resistant cells. Replicative transformation in P. patens should allow the design of experiments aimed at the identification of genomic sequences involved in moss DNA replication. Transgenic strains have been retransformed with bacterial plasmids carrying sequences homologous to the integrated transloci, but conferring resistance to another antibiotic. Our results demonstrate an order of magnitude increase of integrative transformation frequencies in transgenic strains as compared to wild-type, associated with cosegregation of the resistance genes in most of these double resistant transgenic strains. These observations provide strong genetic evidence that gene targeting occurs about ten times more often than random integration in the genome of P. patens. Such ratio of targeted to random integration is about 10 000 times higher than previous reports of gene targeting in plants, and provides the essential requirement for the development of efficient reverse genetics in the haplodiplobiontic P. patens.

Ammonia volatilization in no-till system in the south-central region of the State of Paraná, Brazil

Ammonia (NH3) volatilization can reduce the efficiency of urea applied to the surface of no-till (NT) soils. Thus, the objectives of this study were to evaluate the magnitude of NH3 losses from surface-applied urea and to determine if this loss justifies the urea incorporation in soil or its substitution for other N sources under the subtropical climatic conditions of South-Central region of Paraná State, Brazil. The experiment, performed over four harvesting seasons in a clayey Hapludox followed a randomized block design with four replicates. A single dose of N (150 kg ha-1) to V5 growth stage of corn cultivated under NT system was applied and seven treatments were evaluated, including surface-applied urea, ammonium sulfate, ammonium nitrate, urea with urease inhibitor, controlled-release N source, a liquid N source, incorporated urea, and a control treatment with no N application. Ammonia volatilization was evaluated for 20 days after N application using a semi-open static system. The average cumulative NH3 loss due to the superficial application of urea was low (12.5 % of the applied N) compared to the losses observed in warmer regions of Southeastern Brazil (greater than 50 %). The greatest NH3 losses were observed in dry years (up to 25.4 % of the applied N), and losses decreased exponentially as the amount of rainfall after N application increased. Incorporated urea and alternative N sources, with the exception of controlled-release N source, decreased NH3 volatilization in comparison with surface-applied urea. Urea incorporation is advantageous for the reduction of NH3 volatilization; however, other aspects as its low operating efficiency should be considered before this practice is adopted. In the South-Central region of Paraná, the low NH3 losses from the surface-applied urea in NT system due to wet springs and mild temperatures do not justify its replacement for other N sources.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Exudative mineral losses after serious burns: a clue to the alterations of magnesium and phosphate metabolism.

Hypomagnesemia and hypophosphatemia are frequent after severe burns; however, increased urinary excretion does not sufficiently explain the magnitude of the mineral depletion. We measured the mineral content of cutaneous exudates during the first week after injury. Sixteen patients aged 34 +/- 9 y (mean +/- SD) with thermal burns were studied prospectively and divided in 3 groups according to the extent of their burn injury and the presence or absence of mineral supplements: group 1 (n = 5), burns covering 26 +/- 5% of body surface; group 2 (n = 6), burns covering 41 +/- 10%; and group 3 (n = 5), burns covering 42 +/- 6% with prescription of magnesium and phosphate supplements. Cutaneous exudates were extracted from the textiles (surgical drapes, dressings, sheets, etc) surrounding the patients from day 1 to day 7 after injury. Mean magnesium serum concentrations decreased below reference ranges in 12 patients between days 1 and 4 and normalized thereafter. Phosphate, normal on day 0, was low during the first week. Albumin concentrations, normal on day 0, decreased and remained low. Urinary magnesium and phosphate excretion were within reference ranges and not larger in group 3. Mean daily cutaneous losses were 16 mmol Mg/d and 11 mmol P/d (largest in group 2). Exudative magnesium losses were correlated with burn severity (r = 0.709, P = 0.003). Cutaneous magnesium losses were nearly four times larger than urinary losses whereas cutaneous phosphate losses were smaller than urinary phosphate losses. Mean daily losses of both magnesium and phosphate were more than the recommended dietary allowances. Exudative losses combined with urinary losses largely explained the increased mineral requirements after burn injury.

Active uptake of dendritic cell-derived exovesicles by epithelial cells induces the release of inflammatory mediators through a TNF-alpha-mediated pathway.

Dendritic cells (DCs) can release hundreds of membrane vesicles, called exovesicles, which are able to activate resting DCs and distribute antigen. Here, we examined the role of mature DC-derived exovesicles in innate and adaptive immunity, in particular their capacity to activate epithelial cells. Our analysis of exovesicle contents showed that exovesicles contain major histocompatibility complex-II, CD40, and CD83 molecules in addition to tumor necrosis factor (TNF) receptors, TNFRI and TNFRII, and are important carriers of TNF-alpha. These exovesicles are rapidly internalized by epithelial cells, inducing the release of cytokines and chemokines, but do not transfer an alloantigen-presenting capacity to epithelial cells. Part of this activation appears to involve the TNF-alpha-mediated pathway, highlighting the key role of DC-derived exovesicles, not only in adaptive immunity, but also in innate immunity by triggering innate immune responses and activating neighboring epithelial cells to release cytokines and chemokines, thereby amplifying the magnitude of the innate immune response.

Structural quality of polyacrylamide-treated cohesive soils in the coastal tablelands of Pernambuco

Water-soluble polymers are characterized as effective flocculating agents due to their molecular features. Their application to soils with horizons with structural problems, e.g, a cohesive character, contributes to improvements in the physical quality and thus to the agricultural suitability of such soils. The purpose of this study was to evaluate the structural quality of soils with cohesive horizons of coastal tablelands in the State of Pernambuco treated with polyacrylamide (PAM) as chemical soil conditioner. To this end, three horizons (one cohesive and two non-cohesive) of a Yellow Argisol (Ultisol) were evaluated and to compare cohesive horizons, the horizon of a Yellow Latosol (Oxisol) was selected. The treatments consisted of aqueous PAM solutions (12.5; 50.0; 100.0 mg kg-1) and distilled water (control). The structural aspects of the horizons were evaluated by the stability (soil mass retained in five diameter classes), aggregate distribution per size class (mean weight diameter- MWD, geometric mean diameter - GMD) and the magnitude of the changes introduced by PAM by measuring the sensitivity index (Si). Aqueous PAM solutions increased aggregate stability in the largest evaluated diameter class of the cohesive and non-cohesive horizons, resulting in higher MWD and GMD, with highest efficiency of the 100 mg kg-1 solution. The cohesive horizon Bt1 in the Ultisol was most sensitive to the action of PAM, where highest Si values were found, but the structural quality of the BA horizon of the Oxisol was better in terms of stability and aggregate size distribution.

Impact of different adiposity measures on the relation between serum uric acid and blood pressure in young adults.

Serum uric acid (SUA) concentration is independently associated with blood pressure (BP) in adults. We examined this association in young adults at an age where anti-hypertension treatment, other potential confounding factors and co-morbidity are unlikely to occur. We assessed BP, anthropometric variables including weight, height, waist circumference (WC), body fat percent (using bioimpedance), lifestyle behaviors, SUA and blood lipids in 549 participants aged 19-20 years from a population-based cohort study (Seychelles Child Development Study). Mean (s.d.) SUA was higher in males than females, 0.33 (0.08) and 0.24 (0.07) mmol l(-1), respectively. Body mass index (BMI) was higher in females than males but BP was markedly higher in males than in females. SUA was associated with both systolic and diastolic BP. However, the magnitude of the linear regression coefficients relating BP and SUA decreased by up to 50% upon adjustment for BMI, WC or body fat percent. The association between SUA and BP was not altered upon further adjustment for alcohol intake, smoking, triglycerides or renal function. In fully adjusted models, SUA remained associated with BP (P<0.05) in females. In conclusion, adiposity substantially decreased the association between SUA and BP in young adults, and BP was independently associated with SUA in females. These findings suggest a role of adiposity in the link between hyperuricemia and hypertension.

Magnitude of CD8 T-cell responses against hepatitis C virus and severity of hepatitis do not necessarily determine outcomes in acute hepatitis C virus infection.

Aim: We investigated the relationship between the magnitude of comprehensive hepatitis C virus (HCV)-specific CD8(+) T-cell responses and the clinical course of acute HCV infection. Methods: Six consecutive patients with acute HCV infection were studied. Analysis of HCV-specific CD8(+) T-cell responses was performed using an interferon-gamma-based enzyme-linked immunospot assay using peripheral CD8(+) T-cells, monocytes and 297 20-mer synthetic peptides overlapping by 10 residues and spanning the entire HCV sequence of genotype 1b. Results: Five patients presented detectable HCV-specific CD8(+) T-cell responses against a single and different peptide, whereas 1 patient showed responses against three different peptides. Neither the magnitude of HCV-specific CD8(+) T-cell responses nor the severity of hepatitis predicts the outcome of acute hepatitis. The maximum number of HCV-specific CD8(+) T-cells correlated with maximum serum alanine aminotransferase level during the course (r = 0.841, P = 0.036). Conclusions: HCV-specific CD8(+) T-cell responses were detectable in all 6 patients with acute HCV infection, and 6 novel HCV-specific CTL epitopes were identified. Acute HCV infection can resolve with detectable HCV-specific CD8(+) T-cell responses, but without development of antibody against HCV.

Effects of urban development on the flood-flow characteristics of the Walnut Creek Basin, Des Moines Metropolitan area, Iowa,1978.

This report deals with the probable impact of urban development on the magnitude and frequency of flooding in the lower reach of the Walnut Creek Basin.