941 resultados para Made in USA, branding, IKEA
Resumo:
Significant investments in developing technological innovations have been made in the Australian beef industry but with low adoption rates. By modelling the key variables and their interactions in the innovation adoption process, this research seeks to demonstrate the complexity and dynamics of the process. This research uses causal loop modelling and develops a holistic model of the current innovation adoption system in the Australian beef industry to show the complexity of dynamic interactions among multiple variables. It is suggested that innovation adoption is such an extremely complex issue, and we need to shift our views on this issue from a paradigm of linear thinking to systems thinking. Innovation adoption is more likely to be enhanced based on a full understanding of the complexity and dynamics of the system as a whole. The paper demonstrates to practitioners and developers of innovation the multiple variables and interactions impacting innovation adoption.
Resumo:
A CHILD sex scandal involving victims in Australia and Britain has hit the top echelon of the Anglican Church, with allegations that some of its most senior clergymen failed to respond properly to complaints of horrific abuse. The former archbishop of York, now Lord (David) Hope of Thornes, yesterday expressed regret over failing to report to police allegations in 1999 and 2003 about a former Queensland Anglican school principal, who rose to become the head of education for the church in Britain. The late reverend Robert Waddington has been accused of beating and sexually abusing students during the 1960s at St Barnabas boarding school in Ravenshoe, north Queensland, and later, when he was in charge of the choir as dean of Manchester. A joint investigation by The Australian and The Times newspaper in London has revealed that church officials, including Lord Hope, failed to report the 1999 allegations of abuse made by a former Queensland student and similar claims made in 2003 by the family of a choirboy in Manchester. The alleged victims were never told of the existence of the other allegations.
Resumo:
Introduction This study investigated the sensitivity of calculated stereotactic radiotherapy and radiosurgery doses to the accuracy of the beam data used by the treatment planning system. Methods Two sets of field output factors were acquired using fields smaller than approximately 1 cm2, for inclusion in beam data used by the iPlan treatment planning system (Brainlab, Feldkirchen, Germany). One set of output factors were measured using an Exradin A16 ion chamber (Standard Imaging, Middleton, USA). Although this chamber has a relatively small collecting volume (0.007 cm3), measurements made in small fields using this chamber are subject to the effects of volume averaging, electronic disequilibrium and chamber perturbations. The second, more accurate, set of measurements were obtained by applying perturbation correction factors, calculated using Monte Carlo simulations according to a method recommended by Cranmer-Sargison et al. [1] to measurements made using a 60017 unshielded electron diode (PTW, Freiburg, Germany). A series of 12 sample patient treatments were used to investigate the effects of beam data accuracy on resulting planned dose. These treatments, which involved 135 fields, were planned for delivery via static conformal arcs and 3DCRT techniques, to targets ranging from prostates (up to 8 cm across) to meningiomas (usually more than 2 cm across) to arterioveinous malformations, acoustic neuromas and brain metastases (often less than 2 cm across). Isocentre doses were calculated for all of these fields using iPlan, and the results of using the two different sets of beam data were evaluated. Results While the isocentre doses for many fields are identical (difference = 0.0 %), there is a general trend for the doses calculated using the data obtained from corrected diode measurements to exceed the doses calculated using the less-accurate Exradin ion chamber measurements (difference\0.0 %). There are several alarming outliers (circled in the Fig. 1) where doses differ by more than 3 %, in beams from sample treatments planned for volumes up to 2 cm across. Discussion and conclusions These results demonstrate that treatment planning dose calculations for SRT/SRS treatments can be substantially affected when beam data for fields smaller than approximately 1 cm2 are measured inaccurately, even when treatment volumes are up to 2 cm across.
Resumo:
The ortho, meta and para anions of methyl benzoate may be made in the source of a mass spectrometer by the S(N)2(Si) reactions between HO- and methyl (o-, m-, and p-trimethylsilyl)benzoate respectively. All three anions lose CO upon collisional activation to form the ortho anion of anisole in the ratio ortho>>meta > para. The rearrangement process is charge directed through the ortho anion. Theoretical calculations at the B3LYP/6-311++G(d,p)//HF/6-31+G(d) level of theory indicate that the conversion of the meta and para anions to the ortho anion prior to loss of CO involve 1,2-H transfer(s), rather than carbon scrambling of the methoxycarbonylphenyl anion. There are two mechanisms which can account for this rearrangement, viz. (A) cyclisation of the ortho anion centre to the carbonyl group of the ester to give a cyclic carbonyl system in which the incipient methoxide anion substitutes at one of the two equivalent ring carbons of the three membered ring to yield an intermediate which loses CO to give the ortho anion of anisole, and (B) an elimination reaction to give an intermediate benzyne-methoxycarbonyl anion complex in which the MeOCO- species acts as a MeO- donor, which then adds to benzyne to yield the ortho anion of anisole. Calculations at the B3LYP/6-311++G(d,p)//HF/6-31+G(d) level of theory indicate that (i) the barrier in the first step (the rate determining step) of process A is 87 kJ mol(-1) less than that for the synchronous benzyne process B, and (ii) there are more low frequency vibrations in the transition state for benzyne process B than for the corresponding transition state for process A. Stepwise process A has the lower barrier for the rate determining step, and the lower Arrhenius factor: we cannot differentiate between these two mechanisms on available evidence.
Resumo:
Neutral NCN is made in a mass spectrometer by charge stripping of NCN-., while neutral dicyanocarbene NCCCN can be formed by neutralization of either the corresponding anionic and cationic species, NCCCN-. and NCCCN+.. Theoretical calculations at the RCCSD(T)/aug-cc-pVTZ//B3LYP/6-31+G(d) level of theory indicate that the (3)Sigma (-)(g) State of NCCCN is 18 kcal mol(-1) more stable than the (1)A(1) state. While the majority of neutrals formed from either NCCCN-. or NCCCN+. correspond to NCCCN, a proportion of the neutral NCCCN molecules have sufficient excess energy to effect rearrangement, as evidenced by a loss of atomic carbon in the neutralization reionization (NR) spectra of either NCCCN+. and NCCCN-.. C-13 labeling studies indicate that loss of carbon occurs statistically following or accompanied by scrambling of all three carbon atoms. A theoretical study at the B3LYP/6-31+G(d)//B3LYP/6-31+G(d) level of theory indicates that C loss is a consequence of the rearrangement sequence NCCCN --> CNCCN --> CNCNC and that C scrambling occurs within singlet CNCCN via the intermediacy of a four-membered C-2v-symmetrical transition structure.
Resumo:
Community arts can take many forms, including murals, installations, festivals and performances. The work can be produced by artists solely, by artists working with community groups, or by community groups. Community arts can be on a grand-scale covering whole streets, parks or even towns, or small- scale, such as a mosaic in the corner of a play area. It can be extremely impacting and a permanent fixture, or fragile and small and designed to blow away in the wind. But, common to all these different forms of community arts are the criteria that community arts are made in, for and/or by, the local community.
Resumo:
This paper describes the results of experiments made in the vicinity of EHV overhead lines to investigate sources of clouds of charged particles using simultaneously-recording arrays of electric field meters to measure direct electric fields produced under ion clouds. E-field measurements, made at one metre above ground level, are correlated with wind speed and direction, and with measurements from ionisation counters and audible corona effects to identify possible positions of sources of corona on adjacent power lines. Measurements made in dry conditions on EHV lines in flat remote locations with no adjacent buildings or large vegetation indicate the presence of discrete ion sources associated with high stress points on some types of line hardware such as connectors and conductor spacers. Faulty line components such as insulators and line fittings are also found to be a possible source of ion clouds.
Resumo:
This paper presents a numerical model for understanding particle transport and deposition in metal foam heat exchangers. Two-dimensional steady and unsteady numerical simulations of a standard single row metal foam-wrapped tube bundle are performed for different particle size distributions, i.e. uniform and normal distributions. Effects of different particle sizes and fluid inlet velocities on the overall particle transport inside and outside the foam layer are also investigated. It was noted that the simplification made in the previously-published numerical works in the literature, e.g. uniform particle deposition in the foam, is not necessarily accurate at least for the cases considered here. The results highlight the preferential particle deposition areas both along the tube walls and inside the foam using a developed particle deposition likelihood matrix. This likelihood matrix is developed based on three criteria being particle local velocity, time spent in the foam, and volume fraction. It was noted that the particles tend to deposit near both front and rear stagnation points. The former is explained by the higher momentum and direct exposure of the particles to the foam while the latter only accommodate small particles which can be entrained in the recirculation region formed behind the foam-wrapped tubes.
Resumo:
Head and neck squamous cell carcinoma (HNSCC) is the sixth most common cause of cancer mortality in the world and the 5th most commonly occurring cancer. Tobacco smoking, alcohol consumption and human papilloma virus (HPV) infections have been associated with the occurrence of HNSCC. Despite advances that have been made in HNSCC treatment, smoking-associated HNSCC patients still exhibit a poor 5 year survival rate (30-50 %) and a concomitant poor quality of life. The major clinical challenge to date lies in the early detection of dysplastic lesions,which can progress to malignancy. In addition, there are currently no tools available to monitor HNSCC patients for early stages of local recurrences or distant metastases. In the recent past, micro-RNAs (miRNA) have been assessed for their role in cancer initiation and progression, including HNSCC. It is now well-established that deregulation of these single stranded, small non-coding, 19-25 nt RNAs can e.g. enhance the expression of oncogenes or subdue the expression of tumor suppressor genes. The aims of this review are three-fold: first to retrieve from the literature miRNAs that have specifically been associated with HNSCC, second to group these miRNAs into those regulating tumor initiation, progression and metastasis, and third to discern miRNAs related to smoking-associated HNSCC versus HPV-associated HNSCC development. This review gives an overview on the miRNAs regulating the development of head and neck cancers. The ultimate establishment of miRNA expression profiles that are HNSCC specific, and miRNAs that orchestrate altered gene and protein expression levels in HNSCC, could pave the way for a better understanding of the mechanism underlying its pathogenesis and the development of novel, targeted therapies.
Resumo:
With increasing investments being made in brand development by destination marketing organisations (DMO) since the 1990s, including rebranding and repositioning, more research is necessary to enhance understanding of how to effectively monitor destination brand performance over time. This chapter summarises key findings from a study of brand performance of a competitive set of destinations, in their most important market, between 2003 and 2012. Brand performance was measured from the perspective of consumer perceptions, based on the concept of consumer-based brand equity (CBBE). The results indicated almost no change in perceptions of the five destinations over the 10-year period. Due to the commonality of challenges faced by DMOs worldwide, it is suggested the CBBE hierarchy provides destination marketers with a practical tool for evaluating brand performance over time; in terms of measures of effectiveness of past marketing communications, as well as indicators of future performance.
Resumo:
This chapter takes as its central premise the human capacity to adapt to changing environments. It is an idea that is central to complexity theory but receives only modest attention in relation to learning. To do this we will draw from a range of fields and then consider some recent research in motor control that may extend the discussion in ways not yet considered, but that will build on advances already made within pedagogy and motor control synergies. Recent work in motor control indicates that humans have far greater capacity to adapt to the ‘product space’ than was previously thought, mainly through fast heuristics and on-line corrections. These are changes that can be made in real (movement) time and are facilitated by what are referred to as ‘feed-forward’ mechanisms that take advantage of ultra-fast ways of recognizing the likely outcomes of our movements and using this as a source of feedback. We conclude by discussing some possible ideas for pedagogy within the sport and physical activity domains, the implications of which would require a rethink on how motor skill learning opportunities might best be facilitated.
Resumo:
This paper collates recent research on mobile phone use in Indigenous communities in Australia. Its key finding is that mobile phones are heavily used in these communities, albeit in unique and unusual ways that may be difficult to comprehend beneath 'top-down' measurements. Rather than framing these uses as being compromises made in lieu of appropriate infrastructures or literacies, it is argued that HCI4D (Human-Computer Interaction for Development) would be better served by seriously plumbing into the information they reveal about how mobile phones are constructed and placed in these communities, and what these factors might reveal about local understandings of development and well-being. A consideration of these specific patterns of appropriation is necessary to push the field beyond top-down, rationalist approaches to development towards more flexible, creative solutions that build from local knowledge and competencies.
Resumo:
This paper addresses less recognised factors which influence the diffusion of a particular technology. While an innovation’s attributes and performance are paramount, many fail because of external factors which favour an alternative. This paper, with theoretic input from diffusion, lock-in and path-dependency, presents a qualitative study of external factors that influenced the evolution of transportation in USA. This historical account reveals how one technology and its emergent systems become dominant while other choices are overridden by socio-political, economic and technological interests which include not just the manufacturing and service industries associated with the automobile but also government and market stakeholders. Termed here as a large socio-economic regime (LSER),its power in ensuring lock-in and continued path-dependency is shown to pass through three stages, weakening eventually as awareness improves. The study extends to transport trends in China, Korea, Indonesia and Malaysia and they all show the dominant role of an LSER. As transportation policy is increasingly accountable to address both demand and environmental concerns and innovators search for solutions, this paper presents important knowledge for innovators, marketers and policy makers for commercial and societal reasons, especially when negative externalities associated with an incumbent transportation technology may lead to market failure.
Resumo:
Deterrence-based initiatives form a cornerstone of many road safety countermeasures. This approach is informed by Classical Deterrence Theory, which proposes that individuals will be deterred from committing offences if they fear the perceived consequences of the act, especially the perceived certainty, severity and swiftness of sanctions. While deterrence-based countermeasures have proven effective in reducing a range of illegal driving behaviours known to cause crashes such as speeding and drink driving, the exact level of exposure, and how the process works, remains unknown. As a result the current study involved a systematic review of the literature to identify theoretical advancements within deterrence theory that has informed evidence-based practice. Studies that reported on perceptual deterrence between 1950 and June 2015 were searched in electronic databases including PsychINFO and ScienceDirect, both within road safety and non-road safety fields. This review indicated that scientific efforts to understand deterrence processes for road safety were most intense during the 1970s and 1980s. This era produced competing theories that postulated both legal and non-legal factors can influence offending behaviours. Since this time, little theoretical progression has been made in the road safety arena, apart from Stafford and Warr's (1993) reconceptualisation of deterrence that illuminated the important issue of punishment avoidance. In contrast, the broader field of criminology has continued to advance theoretical knowledge by investigating a range of individual difference-based factors proposed to influence deterrent processes, including: moral inhibition, social bonding, self-control, tendencies to discount the future, etc. However, this scientific knowledge has not been directed towards identifying how to best utilise deterrence mechanisms to improve road safety. This paper will highlight the implications of this lack of progression and provide direction for future research.
Resumo:
This thesis synthesises advancements made in the method of assessment of emergency patients with possible acute cardiac disease and has defined new assessment strategies that supports the safe early discharge of patients at low risk for acute coronary syndromes. These important findings have informed clinicians and health services about improvements that can be made at this current time in the process of care of ED patients, and the studies have had local, national and international influence.