Corporate institutions in a weakened welfare state: a Rawlsian perspective

This paper re-examines the import of Rawls’s theory of justice for private sector institutions in the face of the decline of the welfare state. The argument is based on a Rawlsian conception of justice as the establishment of a basic structure of society that guarantees a fair distribution of primary goods. We propose that the decline of the welfare state witnessed in Western countries over the past forty years prompts a reassessment of the boundaries of the basic structure in order to include additional corporate institutions. A discussion centered on the primary good of self-respect, but extensible to power and prerogatives as well as income and wealth, examines how the legislator should intervene in private sector institutions to counterbalance any unfairness that results from the decline of the welfare state.

Functional interferences in host inflammatory immune response by airway allergic inflammation restrain experimental periodontitis development in mice

Aims Periodontal disease (PD) and airway allergic inflammation (AL) present opposing inflammatory immunological features and clinically present an inverse correlation. However, the putative mechanisms underlying such opposite association are unknown. Material and Methods Balb/C mice were submitted to the co-induction of experimental PD (induced by Actinobacillus actinomycetemcomitans oral inoculation) and AL [induced by sensitization with ovalbumin (OVA) and the subsequent OVA challenges], and evaluated regarding PD and AL severity, immune response [cytokine production at periodontal tissues, and T-helper transcription factors in submandibular lymph nodes (LNs)] and infection parameters. Results PD/AL co-induction decreased PD alveolar bone loss and periodontal inflammation while experimental AL parameters were unaltered. An active functional interference was verified, because independent OVA sensitization and challenge not modulate PD outcome. PD+AL group presented decreased tumour necrosis factor-alpha (TNF-alpha), interleukin (IL)-1 beta, -gamma, IL-17A, receptor activator of nuclear factor kappa-light-chain-enhancer of activated B cells ligand and matrix metalloproteinase (MMP)-13 levels in periodontal tissues, while IL-4 and IL-10 levels were unaltered by AL co-induction. AL co-induction also resulted in upregulated T-bet and related orphan receptor gamma and downregulated GATA3 levels expression in submandibular LNs when compared with PD group. Conclusion Our results demonstrate that the interaction between experimental periodontitis and allergy involves functional immunological interferences, which restrains experimental periodontitis development by means of a skewed immune response.

Bendadaite, a new iron arsenate mineral of the arthurite group

Bendadaite, ideally Fe(2+)Fe(2)(3+)(AsO(4))(2)(OH)(2 center dot).4H(2)O, is a new member of the arthurite group It was found as a weathering product of arsenopyrite on a single hand specimen from the phosphate pegmatite Bendada. central Portugal (type locality) Co-type locality is the granite pegmatite of La via do Almerindo (Almerindo mine), Linopolis, Divmo das Laranjeiras county, Minas Gerais, Brazil Further localities are the Vein Negra mine, Copiapo province, Chile, mid-East, Bou Azzer district, Morocco, and Para Inferida yard, Fenugu Sibirt mine, Gonnosfanadiga, Medio Campidano Province, Sardinia. Italy Type bendadaite occurs as blackish green to dark brownish tufts (<0 1 mm long) and flattened radiating aggregates. in intimate association with an intermediate member of the scorodite-mansfieldite series It is monoclinic. space group P2(l/c). with a = 10 239(3) angstrom. b = 9 713(2) angstrom, c = 5 552(2) angstrom. beta = 94 11(2)degrees. = 550 7(2) angstrom(3). Z = 2 Electron-microprobe analysis yielded (wt %). CaO 0 04, MnO 0 03. CuO 006, ZnO 004. Fe(2)O(3) (total) 43 92, Al(2)O(3) 115. SnO(2) 0 10, As(2)O(5) 43 27. P(2)O(5) 1 86, SO(3) 0.03 The empirical formula is (Fe(0 52)(2+)Fe(0 32)(3+)rectangle(0 16))(Sigma 1 00)(Fe(1 89)(3+)Al(0 11))(Sigma 2 00)(As(1 87)P(0 13))(Sigma 2 00)O(8)(OH)(2 00) 4H(2)O based. CM 2(As,P) and assuming ideal 80, 2(OH), 4H2O and complete occupancy of the ferric on site by Fe(3+) and Al Optically, bendadaite is biaxial, positive, 2V(est) = 85+/-4 degrees, 2V(eale) = 88 degrees, with alpha 1 734(3). 13 1 759(3), 7 1 787(4) Pleochrosim is medium strong X pale reddish brown. Y yellowish brown, Z dark yellowish brown. absorption Z > V > X, optical dispersion weak, r > v. Optical axis plane Is parallel to (010), with X approximately parallel to a and Z nearly parallel to c Bendadaite has vitreous to sub-adamantine luster, is translucent and non-fluorescent It is brittle, shows irregular fracture and a good cleavage parallel to 1010} 3 15 0 10 g/cm(3), 3 193 g/cm3 (for the empirical formula) The five strongest powder diffraction lines [d in angstrom (I)(hkl] are 10 22 (10)(100), 7 036 (8)(110), 4 250 (5)(11 I), 2 865 (4)(311), 4 833 (3)(020,011) The d spacings are very similar to those of its Zn analogue, ojelaite The crystal structure of bendadaite was solved and refined using a crystal from the co-type locality with the composition (Fe(0 95)(2+)rectangle(0 05))(Sigma 1 00)(Fe(1 80)(3+)Al(0 20))Sigma(2 00)(As(1 48)P(0 52))(Sigma 2 00)O(8)) (OH)(2) 4H(2)O (R = 16%) and confirms an arthurite-type atomic arrangement

Covalent attachment of 3,4,9,10-perylenediimides onto the walls of mesoporous molecular sieves MCM-41 and SBA-15

This work describes the covalent grafting of 3,4,9,10-perylenediimides (PDI), which are fluorescent dyes with very interesting optical properties, onto the walls of mesoporous molecular sieves MCM-41 and SBA-15. The mesoporous materials were first treated with 3-aminopropyltriethoxysilane (APTES) in anhydrous toluene, generating amine-containing surfaces. The amine-containing materials were then reacted with 3,4,9,10-perylenetetracarboxylic dianhydride (PTCA), generating surface-grafted PDI. Infrared spectra of the materials showed that the reaction with amino groups took place at both anhydride ends of the PTCA molecule, resulting in surface attached diimides. No sign of unreacted anhydride groups were found. The new materials, designated as MCMN2PDI and SBAN(2)PDI, presented absorption and emission spectra corresponding to weakly coupled PDI chromophores, in contrast to the strongly coupled rings usually found in solid PDI samples. The materials showed a red fluorescence, which could be observed by the naked eye under UV irradiation or with a fluorescence microscope. The PDI-modified mesoporous materials showed electrical conductivity when pressed into a pellet. The results presented here show that the new materials are potentially useful in the design of nanowires. (C) 2007 Elsevier Inc. All rights reserved.

Att integrera i det svenska samhället : En undersökning om kvinnor med invandrarbakgrund och deras syn på introduktion och andra faktorer som påverkar inträdet i det svenska arbetslivet och samhället

The integration policy in Sweden shall encourage individuals to support themselves and take part in society. It shall alsocontribute to equal rights and opportunities for women as well as for men. In Borlänge this has resulted in a program ofintroduction for new arrivals from other countries. However, at the unit responsible for economic support, they havediscovered that women with immigrant background more often than men seem to have trouble starting or became to anending of the program, which then especially leads women to a long-term dependence for economic support. The purpose of this study has therefore been to investigate what factors affect immigrant women’s participation in theintroduction, and what significance this participation has for their possibilities to become economically self-supporting,and integrated into Swedish society. Previous research shows that some of the obstacles for the integration of immigrant women can be that they give birthto many children, are unskilled or have a low degree of education and that they tend to be living under patriarchalgender patterns. Another problem seem to be that some women are not even known as members of the municipalities.All of these problems are as well what was shown in my own study. I have used theoretical perspectives from Bourdieu, Elias & Scotson, Giddens, Roman and al-Baldawi in my analysis.Bourdieu have interesting thoughts about capital, habitus and field, which can help us to understand how individuals arebeing shaped and are given different opportunities to act in a special way or direction. Elias & Scotson describesthrough their study around established and outsiders how the process of integration can take place and what effects thatcan be shown for the opportunities to succeed in that part. Giddens, Roman and al-Baldawi then give us different waysto look at the patriarchy and family structures around the world. The result of this study shows that the willingness to integrate and be able to take care of your own support for living isan important part for the women for succeeding. For the other women, that don’t succeed, it turns out to be just like theprevious research has been shown. Gender patterns, many children and a low or no education skill all seems to be partof the issue. It is also suggested that the generosity of the Swedish welfare system might hinder rather than help someimmigrant women to become integrated into Swedish society.

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Patogenicidade de isolados de três fungos entomopatogênicos a soldados de Atta sexdens sexdens (Linnaeus, 1758) (Hymenoptera : Formicidae)

As formigas cortadeiras atacam diversas culturas agrícolas, pastagens e os reflorestamentos, atuando sobre muitas espécies vegetais. O presente trabalho teve por objetivo avaliar a patogenicidade dos fungos Beauveria bassiana (isolados AM 9 e JAB 06), Metarhizium anisopliae (isolados E 9 e AL) e Paecilomyces farinosus (isolados CG 189 e CG 195) a soldados de Atta sexdens sexdens, em condições de laboratório. Após a coleta em formigueiro isento de produtos fitossanitários, exemplares de soldados foram cuidadosamente separados em grupos de oito indivíduos e, a seguir, banhados em suspensões contendo 1,0 x 10(6), 1,0 x 10(7), 1,0 x 10(8) e 1,0 x 10(9) conídios/mL de cada isolado. em seguida, cada grupo de formigas foi transferido para unidades de câmara úmida e mantido, sem alimentação, a 27 ± 1 ºC. A mortalidade foi verificada diariamente. Os três fungos se mostraram eficientes patógenos, pois provocaram alta mortalidade, matando mais que 80% dos soldados nos quatro primeiros dias após a inoculação. Os melhores isolados foram JAB 06 e AL, na concentração de 1,0 x 10(9) con./mL. Os isolados JAB 06, AL, CG 195 apresentaram maior capacidade de esporular nos cadáveres das formigas e os tempos letais decresceram com o aumento da concentração de conídios usada.

Antecipação da adubação de semeadura do milho em dois sistemas de manejo do solo

Cada sistema de manejo do solo é trabalhado de maneira própria, alterando de forma diferenciada suas propriedades químicas, físicas e biológicas, podendo requerer modificações nas recomendações e no manejo da adubação. Com a finalidade de avaliar o desempenho de três cultivares de milho em relação à adubação realizada em pré-semeadura, comparada à adubação na semeadura, em dois sistemas de manejo do solo, foi realizado este estudo. O experimento foi conduzido na Faculdade de Ciências Agronômicas da UNESP, campus de Botucatu-SP, no período de novembro de 2003 a maio de 2004, em Nitossolo Vermelho distroférrico. O delineamento experimental utilizado foi o de blocos ao acaso com parcelas subsubdivididas e quatro repetições. As parcelas foram constituídas pelos sistemas de manejo do solo (plantio direto e preparo reduzido com escarificação); as subparcelas, pelas épocas de adubação (adubação de pré-semeadura na superfície do solo, realizada 22 dias antes da semeadura do milho, e adubação feita junto com a semeadura do milho, sendo os fertilizantes incorporados ao solo); e as subsubparcelas, pelos cultivares de milho (DKB 333B, CO 32 e AL Bandeirante), totalizando 12 tratamentos. Os dados de produtividade, componentes de produção e teores de N, P e K no tecido foliar foram submetidos à análise de variância e às análises multivariadas de agrupamentos e de componentes principais. Os sistemas de manejo do solo não influíram no desempenho da cultura do milho, tampouco as épocas de adubação. As diferenças observadas nos componentes de produção e no desempenho da cultura do milho foram decorrentes, principalmente, da divergência genética dos cultivares de milho.

Obtenção de compósitos cerâmicos baseados em Al2O3/TiC através dos precursores poliméricos

The obtaining of ceramic materials from polymeric precursors is subject of numerous studies due to lower energy costs compared to conventional processing. The aim of this study is to investigate and improve the mechanism for obtaining ceramic matrix composite (CMC) based on SiOC/Al2O3/TiC by pyrolysis of polysiloxane in the presence of an active filler and inert filler in the pyrolysis temperature lower than the usually adopted for this technique, with greater strength. It also investigates the influence of pyrolysis temperature, the content of Alas active filler, the presence of infiltrating agents (Al, glass and polymer) after pyrolysis, temperature and infiltration time on some physical and mechanical properties. Alumina is used as inert filler and Al and Ti as active filler in the pyrolysis. Aluminum, glass and polysiloxane are used as agents infiltrating the post-pyrolysis. The results are analyzed with respect to porosity and bulk density by the Archimedes method, the presence of crystalline phases by X-ray diffraction (XRD) and microstructure by scanning electron microscopy (SEM). The ceramic pyrolyzed between 850 °C 1400 °C contain porosity 15% to 33%, density 2.34 g/cm3 and flexural strength at 4 points from 30 to 42 MPa. The microstructure features are porous, with an array of Al2O3 reinforced by TiC particles and AlTi3. The infiltration post-pyrolysis reveals decrease in porosity and increase density and strength. The composites have potential applications where thermal stability is the main requirement

Efficiency of seed treatment with fungicides in castor bean crop genotypes

With the objective of assessing castor bean genotypes in relation to the influence of seeds treatment on agronomic characteristics and physiological quality of seeds, two experiments were conducted between November, 2005 and March, 2006. In the first study, experimental design used was randomized complete blocks, in factorial scheme (2 x 10), by comparing Lyra hybrid and AL Guarany 2002 cultivar and nine fungicides, including its mixtures and test, with four repetitions. Plant height, stem diameter, medium yield and observation of diseases incidence were evaluated. In the second study, conducted in randomized entirely design, in factorial scheme 2 x 10 with four repetitions, Savana and AL Guarany 2002 genotypes were analyzed, using the same fungicides. Germination, infected and dead seeds, vigor, initial moisture content and simulation of field emergency and seeds sanitary quality were also evaluated. The results obtained point that there is positive influence of seed treatment on agronomic characteristics in castor bean crop, increasing grain yield for AL Guarany cultivar and Lyra hybrid. In the analysis of seed quality, it was observed that seed treatments with fungicides and their mixtures provided superior percentages of germination and vigor, reduced the number of infected and dead seeds and increased seeds emergency for Guarany 2002 cultivar and Savana hybrid.

Preferência alimentar e aspectos biológicos de Leptoglossus zonatus Dallas,1852 (Hemiptera: Coreidae) em diferentes genótipos de milho

The present research was accomplished under field and laboratory conditions (T= 25[plus or minus]2[degree] C, R.H.= 70[plus or minus] 10 % and fotoperiod= 12 horas) at FCA/UNICASTELO from Fernandopolis-SP, Brazil. The feeding preference of corn bug Leptoglossus zonatus Dallas, 1852 (Hemiptera: Coreidae) was evaluated on corn genotypes AL-Bianco, AL-Manduri, AL-25 Piratininga, AL-34 e AL-Manduri in the field. Besides, some behavioral factors relative to infestation and oviposition were observed. In laboratory, the nymph's development was evaluated on ears from each corn genotype, aiming to verify the non-preference and/or antibiosis ocurrence. The females of L. zonatus preferred to oviposite on sheats from leaves. Adults and nymphs may occur in whole parts of the plants. The AL-25, AL-34, AL-Manduri and AL-Bandeirante corn genotypes were classified as moderately resistant, expressing non-preference and/or antibiosis against the corn bug. In other way AL-Bianco was the most suscetible to nymphs of the insect.

Disponibilidade de nutrientes no solo: decomposição e liberação de compostos orgânicos de resíduos vegetais

O objetivo principal desta revisão foi reunir informações a respeito da ação de compostos orgânicos produzidos por plantas na disponibilidade de nutrientes nos solos, principalmente sobre os cátions Ca, Mg e K e sobre o ânion fosfato. O sistema de cultivo adotado ocasiona mudanças nas propriedades químicas e físicas do solo, especialmente na disponibilidade de nutrientes e condicionamento físico do solo. Tem-se observado o acúmulo de nutrientes nas camadas superficiais do solo no sistema de semeadura direta, pelo não-revolvimento do solo e pela deposição de resíduos de culturas na superfície. Os ácidos orgânicos provenientes de plantas podem interagir com a fase sólida e ocupar os sítios de adsorção de nutrientes, competindo diretamente com eles e aumentando sua disponibilidade no solo. A adição de resíduos vegetais pode promover, antes da humificação, a elevação do pH, por promover complexação de H e Al com compostos do resíduo vegetal, deixando Ca, Mg e K mais livres em solução, o que pode ocasionar aumento na saturação da CTC por estes cátions de reação básica. Também é normal observar o aumento na disponibilidade de P no solo com a adição de resíduos vegetais, tanto pelo P presente no resíduo como por competição de compostos orgânicos dos resíduos pelos sítios de troca no solo. A persistência dos compostos orgânicos também é fator que tem grande interferência nos processos de sorção/dessorção de cátions e ânions, dependendo da atividade microbiana, da disponibilidade metabólica do substrato carbonado e da sorção aos colóides do solo.

Obtenção de compósitos cerâmicos reforçados com carbetos refratários a partir de precursores poliméricos

In this work, were produced ceramic matrix composites based in SiCxOy e Al2O3 reinforced with NbC, by hydrosilylation reaction between D4Vi and poly(methylhydrosiloxane) mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. After the mixture and compactation at 80ºC (warm pressing), the samples were pyrolised at 1200 and 1400ºC and infiltred with ICZ and LZSA respectively, and thermically, physical and structurally characterized by X-ray diffraction, density and porosity, flexural mechanical strength and fracture surface by scanning electron microscopy. The yield ceramic obtained after pyrolysis for studied composition at 1200ºC was 95%. The obtained phases had been identified as being Al3Nb, NbSi2 and NbC. The composite material presented apparent porosity varying of 15 up to 32% and mechanical flexural strenght of 32 up to 37,5MPa. After the fracture surface analysis, were observed a phases homogeneous dispersion, with some domains of amorphous and crystalline aspect. The samples that were submitted the infiltration cycle presented a layer next the surface with reduced pores number in relation to the total volume