Determinação dos intervalos de referência para lipídios, lipoproteínas e apolipoproteínas no estado do Rio Grande do Norte

The lipid profile is a group of lab tests that include triglycerides, total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C) and low-density lipoprotein cholesterol (LDL-C). However, serum non-HDL-C, Apo A-I and Apo B levels, as well as the lipids ratios (TC/HDL-C, LDL-C/HDL-C and Apo B/Apo A-I), have been described as better predictors of cardiovascular diseases. Reference intervals are tools often used to help the evaluation of the people s health state. These days, Brazilian studies still use the reference intervals of lipids and lipoproteins from other countries, ignoring differences between the populations. Therefore, this study aimed to establish reference intervals for lipids, lipoproteins and apolipoproteins in adults of Rio Grande do Norte/Brazil. Healthy individuals (96 men and 283 women) between 18 and 59years old formed the reference sample group. The samples were collected after fasting 12 to 14 hours. Information on lifestyle and dietary habits of the participants were obtained through questionnaire. The serum glucose level and renal and liver activity were evaluated by laboratory testing. The results of lipid profile were analyzed according to sex, age and mesoregion of Rio Grande do Norte, with significance level of 5% (p < 0,05). The lower and upper reference limits were identified by the 2.5 percentile and 97.5 percentile, respectively, and assurance intervals of 90% was calculated for each of these limits. Among the determinants of lipid profile analyzed, only a few significant differences were observed according to sex, but in terms of age, the groups of smaller and older ages were most likely different. When evaluated by region, the means of West region shown the most significant variations. Not many studies were useful to compare the reference intervals determined in this study. Thus, it becomes necessary to carry out similar studies in other regions of Brazil and of the world given the clinical importance of reference intervals

Algoritmos para o problema de localização de uma facilidade com distâncias limitadas e restrições de atendimento

The objective in the facility location problem with limited distances is to minimize the sum of distance functions from the facility to the customers, but with a limit on each distance, after which the corresponding function becomes constant. The problem has applications in situations where the service provided by the facility is insensitive after a given threshold distance (eg. fire station location). In this work, we propose a global optimization algorithm for the case in which there are lower and upper limits on the numbers of customers that can be served

A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression

The open capacitated arc routing problem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mechanisms for consideration for intervention in the development of organophosphorus-induced delayed neuropathy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vortices in a mesoscopic superconducting disk of variable thickness

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vortex dynamics in mesoscopic superconducting square of variable surface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural behaviour of three-pile caps subjected to axial compressive loading

This work presents a comparative analysis about the behaviour of pile caps supported by 3 piles subjected to axial loading. Piles with 20 cm and 30 cm diameters were analysed. The main reinforcement was maintained in all the specimens, however, the arrangement of the secondary reinforcement varied. The main reinforcement consisted of steel bars connecting the piles. The secondary reinforcement was made up of: (a) bars going through the piles and through the projection of the column, (b) bars forming a network, and (c) vertical and horizontal stirrups. The main objective was the observation of the pile cap behaviour regarding the cracks and the modes of rupture. The real scale specimens were subjected to experimental tests until failure by rupture. Instruments were placed with the aim to obtain the displacement of the bases, the strains in the main and secondary reinforcement bars, in the compression struts, in the lower and upper nodal zones and in the sides of the caps. None of the caps reached failure by rupture with a load less than 1.12 times the theoretical load. The specimens ruptured due to the cracking of the compression strut and/or the yielding of the reinforcement bars in one direction.

Global optimization approach for the H2-norm model reduction problem

A branch and bound algorithm is proposed to solve the H2-norm model reduction problem for continuous-time linear systems, with conditions assuring convergence to the global optimum in finite time. The lower and upper bounds used in the optimization procedure are obtained through Linear Matrix Inequalities formulations. Examples illustrate the results.

Otimização global para os problemas de redução H2 de modelos e redução H2 da ordem do controlador

A branch and bound algorithm is proposed to solve the H2-norm model reduction problem and the H2-norm controller reduction problem, with conditions assuring convergence to the global optimum in finite time. The lower and upper bounds used in the optimization procedure are obtained through linear matrix inequalities formulations. Examples illustrate the results.

Global optimization for the ℋ∞-norm model reduction problem

A branch and bound algorithm is proposed to solve the [image omitted]-norm model reduction problem for continuous and discrete-time linear systems, with convergence to the global optimum in a finite time. The lower and upper bounds in the optimization procedure are described by linear matrix inequalities (LMI). Also proposed are two methods with which to reduce the convergence time of the branch and bound algorithm: the first one uses the Hankel singular values as a sufficient condition to stop the algorithm, providing to the method a fast convergence to the global optimum. The second one assumes that the reduced model is in the controllable or observable canonical form. The [image omitted]-norm of the error between the original model and the reduced model is considered. Examples illustrate the application of the proposed method.

Proposta de protocolo de enfermagem para prevenção do risco do tromboembolismo em pacientes oncológicos

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Bivalves permianos da fase de continentalização das bacias do Gondwana Ocidental: sistemática, paleogeografia e bioestratigrafia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dinâmica do ar em barra pulverizadora, com saída única e dupla, deposição da calda e controle da ferrugem asiática da soja

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos parâmetros salivares de pacientes portadores da doença do refluxo gastroesofágico antes e após tratamento cirúrgico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)