Desempenho de cordeiros lactentes recebendo probióticos em comedouros privativos

The presente study was carried out to evaluate the performance of 40 lambs 7/8 Ile de France 1/8 Ideal (20 not castrated males and 20 females) raised with access to creep feeding, until get 17 kg of corporeal weight. The animals were divided in treatments, receiving isoproteic and isoenergetic diets, with diferent levels of probiotics (D1=0%, D2=0,8% e D3=12%). They were analysed in regart to born weight, weight at 30 days and weight gain at maternal independent (from 1th to 4th weeks) and maternal independent (from 5th to 8th week), the age of wean and daily weight gain. The average intake of dry matter by the lambs at D1, D2 and D3 was 0,27, 0,26 and 0,27 kg/day, respectively. On maternal dependent phase, there was no interaction and differences between diet and sex in the born weight (3.30 kg), weight at 30 days of age (11.79 kg) and in the average daily weight gain (0.28 kg). On maternal independent phase, there were no differences in the age of weam (53 days) and daily weight gain (0,26 kg) between diet and sex. It was concluded that probiotics inclusion in the diet of the suckling lambs (males not castrated and females) didn't improve their performance.

Effect of time in hardness test on artificially demineralized human dental enamel

A cross-sectional microhardness (CSMH) test was carried out in human dental enamel exposed to a demineralizing solution in order to evaluate two different times of indentation in sound tissue and artificially induced caries. Twenty caries-free extracted human molars had one of their smooth surfaces sectioned and the enamel surface was isolated with nail polish except for an area of 6 mm2. These specimens were submitted to artificially induced enamel caries on a lactate buffer containing 0.1 ppm fluoride (F) during 28 days. All specimens were bisected to create groups A and B in which CSMH test was performed employing a Knoop indenter with a 25g load for 5 or 10 s, respectively. Student's paired t-test (p<0.05) was used to determine statistically significant differences between group A and B in 7 depths. There were no significant differences between any of the analyzed depths. Since the present experiment showed no significant difference when comparing indentations made with a 25 g load during either 5 or 10 s in different depths, this method can be used with either one of the time intervals tested without compromising a CSMH test on artificially demineralized human enamel.

Comportamento ingestivo de cordeiros em terminação a pasto

The objective of this study was to evaluate intake behavior of lambs in pasture systems: (1) lambs kept with their dams in ryegrass (Lolium multiflorum Lam.) without supplementation; (2) lambs kept with their dams in the same pasture but supplemented in creep feeding; (3) lambs kept with their dams in the same pasture but supplemented in creep grazing with white clover. Three evaluations of intake behavior were performed to check the activities carried out by animals (grazing, rumination, suckling and other activities). Grazing, rumination and other activities times were different (p < 0.05) for non-supplemented lambs. For these lambs, grazing and rumination times were longer than other activities time compared to other systems. Creep feeding reduced grazing time (p < 0.05), probably due to easy access and quality of concentrate. Lambs in creep grazing had reduced (p < 0.05) rumination time. Bite mass in creep grazing was higher (p < 0.05), probably due to easy harvesting of leaves by lambs. It was concluded that the production system affects feeding strategy of lambs and the preference for legumes suggests the use of creep grazing for finishing lambs.

Efeito da suplementação sobre a digestibilidade dos nutrientes e desempenho de bezerros lactentes mantidos em pastagens de Brachiaria brizantha

This study evaluated the effect of supplementation and the type of supplement on nutrient digestibility and performance of lactating calves fed with Brachiara brizantha cv. Marandu pasture from February to May. The treatments were: supplementation in creep-feeding with protein concentrate, with energy concentrate, with energy-protein concentrate and without concentrate. In a Latin square design, four Canchim calves were kept in individual pens, receiving marandu hay and controlled suckling twice a day. The performance was evaluated in a completely randomized design, with 23 calves kept with the cows. Higher intake and nutrients digestibility (65% of dry mater digestibility) and calf performance (live weight gain of 0.98 kg day-1) were obtained with energyprotein concentrate, and the cows kept weight and body reserves during the experiment. The protein concentrate did not show good results, and was lower than the performance of calves without supplementation - 0.56 and 0.77 kg day-1, respectively. The performance of calves without supplementation was similar to calves receiving energy concentrate, but the cows lost more body weight and energy reserves. The supplementation with energy-protein concentrate for lactating calves fed with Brachiara brizantha cv. Marandu during the beginning of the dry season was benefifical for the performance of calves and cows.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Physicochemical analysis of Ti-Si-B powder aalloys

Titanium alloys of Ti-Si-B system were manufactured by blended elemental powder method using Ti, Si and B powders as starting materials. It was found that uniaxial and isostatic pressing followed by hot pressing at around 1000°C, for 20 minutes, provided good densification of such alloys. The physicochemical studies were performed by means of scanning electron microscopy, X-ray diffraction, atomic force microscopy and microindentation/wear tests. The investigations revealed a multiphase microstructure formed mainly by α-titanium, Ti6Si2B, Ti5Si3, TiB and Ti3Si phases. The phase transformations after pressureless sintering at 1200°C was also studied by X-ray diffraction for the Ti-18Si-6B composition. As stated in some other researches, these intermetallics in the α-titanium matrix provide high wear resistance and hardness, with the best wear rate of 0.2 mm3/N.m and the highest hardness of around 1300 HV. © (2012) Trans Tech Publications, Switzerland.

Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition

Diverse amorphous hydrogenated carbon-based films (a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:Si:O) were obtained by radiofrequency plasma enhanced chemical vapor deposition (PECVD) and plasma immersion ion implantation and deposition (PIIID). The same precursors were used in the production of each pair of each type of film, such as a-C:H, using both PECVD and PIIID. Optical properties, namely the refractive index, n, absorption coefficient, α, and optical gap, ETauc, of these films were obtained via transmission spectra in the ultraviolet-visible near-infrared range (wavelengths from 300 to 3300 nm). Film hardness, elastic modulus and stiffness were obtained as a function of depth using nano-indentation. Surface energy values were calculated from liquid drop contact angle data. Film roughness and morphology were assessed using atomic force microscopy (AFM). The PIIID films were usually thinner and possessed higher refractive indices than the PECVD films. Determined refractive indices are consistent with literature values for similar types of films. Values of ETauc were increased in the PIIID films compared to the PECVD films. An exception was the a-C:H:Si:O films, for which that obtained by PIIID was thicker and exhibited a decreased ETauc. The mechanical properties - hardness, elastic modulus and stiffness - of films produced by PECVD and PIIID generally present small differences. An interesting effect is the increase in the hardness of a-C:H:Cl films from 1.0 to 3.0 GPa when ion implantation is employed. Surface energy correlates well with surface roughness. The implanted films are usually smoother than those obtained by PECVD. ©2013 Elsevier B.V. All rights reserved.

The platform switching concept revisited. An experimental study in dogs

Objective: To evaluate the influence of the configuration of the marginal aspect of implants placed immediately into extraction sockets on peri-implant hard tissue adaptation. Material and methods: In 6 Labrador dogs, endodontic treatments of the mesial roots of 1M1 were performed and the distal roots were removed. 2P2 was extracted as well. Implants were immediately placed in the center of the distal alveoli. Cylindrical straight implants were installed in the right side of the mandible (Control), while, in the left side, implants with a reduced diameter in the coronal portion, yielding an indentation in the surface continuity (Test), were installed. Cover screws were affixed, and the flaps were sutured to allow non-submerged healing. After 4 months of healing, histological slides were obtained for assessments. Results: A buccal resorption of 1.58 ± 1.28 and 1.90 ± 1.93 mm at the control and of 0.26 ± 0.90 and 0.14 ± 0.66 mm at the test sites was observed at the premolar and molar regions, respectively. The buccal coronal level of osseointegration was located apically to the margin of the smooth/rough surface border by 2.40 ± 0.90 and 3.70 ± 0.87 mm at the control sites and 1.19 ± 0.45 and 2.16 ± 0.96 mm at the test sites at the premolar and molar sites, respectively. All differences yielded statistical significance. Conclusions: The use of implants with a reduced diameter in their coronal aspect may contribute to preservation of the buccal bony crest in a more coronal level compared with conventional implants. Thus, the study confirmed the efficacy of the platform switching concept. © 2013 John Wiley & Sons A/S.

Aplicação da retroanálise na identificação da parcela devida à fluência do concreto da perda de protensão de vigas pré-moldadas de pontes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização mecânica e microestrutural de aços Bake hardening graus 180 e 210 aplicados na indústria automotiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da influência da microestrutura no comportamento mecânico de juntas soldadas de um aço estrutural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Redução de verminose, parâmetros hematológicos e bioquímicos de cordeiros alimentados com extrato de própolis na ração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação bioeconômica de bezerros lactentes recebendo diferentes fontes protéicas em cocho privativo em pastagens de Brachiaria brizantha cv. Marandú manejada intensivamente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento dos tecidos muscular e adiposo e qualidade da carne de novilhas de diferentes grupos genéticos no modelo biológico superprecoce

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento muscular e qualidade da carne de bovinos nelore, simental e seus mestiços no sistema de produção superprecoce

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)