Satisfaction with pregnancy and delivery services: The quality of maternity care services as experienced by women

Objective: The objective of this study was to investigate the opinions of women regarding the satisfaction about the quality of maternity care received. We hope to establish whether health care technology increases satisfaction or whether it actually interferes with the construction of personal satisfaction in the process of care. Design and setting: Information was gathered using the focus group technique. The area of study comprised the post-natal groups run as part of the Sexual and Reproductive Health Programme of the Catalan Health Authority. (Spain) Participants: Five focus groups were held between May 2006 and July 2007. Findings: Quality of care is a complex concept in which a number of independent core features can be identified. We have grouped these core features into three basic categories. Safety: the hospital and its technological facilities, and the technical expertise of health professionals. The other two main pillars of quality of care are the human dimension of the relationship between the carers and the patient, and finally the structural aspects that determine the context in which the heath care is provided. Key conclusions and implications for practice: The mothers of our study feel satisfied with healthcare technology and view it as a source of security; technology become indispensable features in order to reduce the anxiety provoked by the perceived lack of confidence in their ability as mothers. In this study, women, both during pregnancy and especially when giving birth, believe their feelings and values should be understood by professionals, from whom they seek empathy and a personal commitment, and not just information.

Satisfaction with pregnancy and delivery services: The quality of maternity care services as experienced by women

Objective: The objective of this study was to investigate the opinions of women regarding the satisfaction about the quality of maternity care received. We hope to establish whether health care technology increases satisfaction or whether it actually interferes with the construction of personal satisfaction in the process of care. Design and setting: Information was gathered using the focus group technique. The area of study comprised the post-natal groups run as part of the Sexual and Reproductive Health Programme of the Catalan Health Authority. (Spain) Participants: Five focus groups were held between May 2006 and July 2007. Findings: Quality of care is a complex concept in which a number of independent core features can be identified. We have grouped these core features into three basic categories. Safety: the hospital and its technological facilities, and the technical expertise of health professionals. The other two main pillars of quality of care are the human dimension of the relationship between the carers and the patient, and finally the structural aspects that determine the context in which the heath care is provided. Key conclusions and implications for practice: The mothers of our study feel satisfied with healthcare technology and view it as a source of security; technology become indispensable features in order to reduce the anxiety provoked by the perceived lack of confidence in their ability as mothers. In this study, women, both during pregnancy and especially when giving birth, believe their feelings and values should be understood by professionals, from whom they seek empathy and a personal commitment, and not just information.

Utilização de zeólitas sintetizadas a partir de xisto retortado na remoção de arsênio em águas contaminadas

The solid by-product of the oil shale processing (PETROBRAS - Brazil) was used as raw material to synthesize zeolites A and faujasite. Alkaline fusion followed by hydrothermal treatment was the synthesis procedure used, and five different starting material compositions were obtained. The more crystalline zeolite-type materials synthesized, the pretreated oil shale ash and commercial zeolites were used as adsorbents in the purification of pollutant solutions with arsenic. The zeolite-type material composed of a mixture of zeolite A (42.6%) and faujasite (52.9%) presented an ion exchange capacity comparable to the pure zeolites A and faujasite, much better than the pretreated ash.

Carboidratos como fonte de compostos para a indústria de química fina

Coal, oil, natural gas, and shale gas are biomass that is formed millions of years ago. These are non-renewable and depleting, even considering the recent discovery of new sources of oil in the presalt and new technologies for the exploitation of shale deposits. Currently, these raw materials are used as a source of energy production and are also important for the production of fine chemicals. Since these materials are finite and their (oil) price is increasing, it is clear that there will be a progressive increase in the chemical industry to use renewable raw materials as a source of energy, an inevitable necessity for humanity. The major challenge for the society in the twenty first century is to unite governments, universities, research centers, and corporations to jointly act in all areas of science with one goal of finding a solution to global problems, such as conversion of biomass into compounds for the fine chemical industry.Non-renewable raw materials are used in the preparation of fuels, chemical intermediates, and derivatives for the fine chemical industry. However, their stock in nature has a finite duration, and their price is high and will likely increase with their depletion. In this scenario, the alternative is to use renewable biomass as a replacement for petrochemicals in the production of fine chemicals. As the production of biomass-based carbohydrates is the most abundant in nature, it is judicious to develop technologies for the generation of chain products (fuels, chemical intermediates, and derivatives for the fine chemicals industry) using this raw material. This paper presents some aspects and opportunities in the area of carbohydrate chemistry toward the generation of compounds for the fine chemical industry.

Química Sem Fronteiras: o desafio da energia

Coal, natural gas and petroleum-based liquid fuels are still the most widely used energy sources in modern society. The current scenario contrasts with the foreseen shortage of petroleum that was spread out in the beginning of the XXI century, when the concept of "energy security" emerged as an urgent agenda to ensure a good balance between energy supply and demand. Much beyond protecting refineries and oil ducts from terrorist attacks, these issues soon developed to a portfolio of measures related to process sustainability, involving at least three fundamental dimensions: (a) the need for technological breakthroughs to improve energy production worldwide; (b) the improvement of energy efficiency in all sectors of modern society; and (c) the increase of the social perception that education is a key-word towards a better use of our energy resources. Together with these technological, economic or social issues, "energy security" is also strongly influenced by environmental issues involving greenhouse gas emissions, loss of biodiversity in environmentally sensitive areas, pollution and poor solid waste management. For these and other reasons, the implementation of more sustainable practices in our currently available industrial facilities and the search for alternative energy sources that could partly replace the fossil fuels became a major priority throughout the world. Regarding fossil fuels, the main technological bottlenecks are related to the exploitation of less accessible petroleum resources such as those in the pre-salt layer, ranging from the proper characterization of these deep-water oil reservoirs, the development of lighter and more efficient equipment for both exploration and exploitation, the optimization of the drilling techniques, the achievement of further improvements in production yields and the establishment of specialized training programs for the technical staff. The production of natural gas from shale is also emerging in several countries but its production in large scale has several problems ranging from the unavoidable environmental impact of shale mining as well as to the bad consequences of its large scale exploitation in the past. The large scale use of coal has similar environmental problems, which are aggravated by difficulties in its proper characterization. Also, the mitigation of harmful gases and particulate matter that are released as a result of combustion is still depending on the development of new gas cleaning technologies including more efficient catalysts to improve its emission profile. On the other hand, biofuels are still struggling to fulfill their role in reducing our high dependence on fossil fuels. Fatty acid alkyl esters (biodiesel) from vegetable oils and ethanol from cane sucrose and corn starch are mature technologies whose market share is partially limited by the availability of their raw materials. For this reason, there has been a great effort to develop "second-generation" technologies to produce methanol, ethanol, butanol, biodiesel, biogas (methane), bio-oils, syngas and synthetic fuels from lower grade renewable feedstocks such as lignocellulosic materials whose consumption would not interfere with the rather sensitive issues of food security. Advanced fermentation processes are envisaged as "third generation" technologies and these are primarily linked to the use of algae feedstocks as well as other organisms that could produce biofuels or simply provide microbial biomass for the processes listed above. Due to the complexity and cost of their production chain, "third generation" technologies usually aim at high value added biofuels such as biojet fuel, biohydrogen and hydrocarbons with a fuel performance similar to diesel or gasoline, situations in which the use of genetically modified organisms is usually required. In general, the main challenges in this field could be summarized as follows: (a) the need for prospecting alternative sources of biomass that are not linked to the food chain; (b) the intensive use of green chemistry principles in our current industrial activities; (c) the development of mature technologies for the production of second and third generation biofuels; (d) the development of safe bioprocesses that are based on environmentally benign microorganisms; (e) the scale-up of potential technologies to a suitable demonstration scale; and (f) the full understanding of the technological and environmental implications of the food vs. fuel debate. On the basis of these, the main objective of this article is to stimulate the discussion and help the decision making regarding "energy security" issues and their challenges for modern society, in such a way to encourage the participation of the Brazilian Chemistry community in the design of a road map for a safer, sustainable and prosper future for our nation.

Estresse na Formação Médica: como Lidar com Essa Realidade?

RESUMO Ao ingressarem no curso de Medicina, os estudantes se sentem eufóricos e realizados. No entanto, os desafios inerentes à formação podem ser fonte de estresse e angústia, comprometendo o bem-estar desses estudantes. Assim, este estudo se propôs a explorar as causas do estresse na formação médica e os modos de enfrentamento dos estudantes de uma universidade em Montreal, Canadá. Trata-se de um estudo exploratório, com abordagem metodológica qualitativa, mediante um questionário semiestruturado. Participaram do estudo 18 estudantes distribuídos entre o primeiro e o quarto ano do curso de Medicina. Os principais eventos estressores mencionados pelos entrevistados foram: dificuldade em conciliar as atividades acadêmicas e a vida pessoal, avaliações de desempenho, relação com professores/residentes e pacientes, além de terem que morar longe da família. Diante desses eventos, os estudantes desenvolveram estratégias adaptativas e algumas não adaptativas. Entre as estratégias adaptativas, eles mencionaram: falar sobre sentimentos negativos, apoio psicológico, atividades de lazer e apoio espiritual. Em relação às respostas não adaptativas, foram observados sentimentos negativos, como angústia e tristeza, negação da realidade, bebida alcoólica e drogas para recreação. Nesse contexto, as universidades precisam reconhecer essa realidade, de modo a construir estratégias institucionais que possam ajudar os estudantes a lidar com os eventos estressores, para que, assistidos nas próprias necessidades, consigam enxergar as necessidades psicossociais dos pacientes.

Web-Based Extension Studies in Medical Calculation

Nordic forum for nursing teachers. Wednesday - Friday 9-11 November 2011 Ounasvaara Campus School of Heath Care and Sports Rovaniemi University of Applied Sciences

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Fingerprinting of cell lines by directed amplification of minisatellite-region DNA (DAMD)

The development of in vitro propagation of cells has been an extraordinary technical advance for several biological studies. The correct identification of the cell line used, however, is crucial, as a mistaken identity or the presence of another contaminating cell may lead to invalid and/or erroneous conclusions. We report here the application of a DNA fingerprinting procedure (directed amplification of minisatellite-region DNA), developed by Heath et al. [Nucleic Acids Research (1993) 21: 5782-5785], to the characterization of cell lines. Genomic DNA of cells in culture was extracted and amplified by PCR in the presence of VNTR core sequences, and the amplicons were separated by agarose gel electrophoresis. After image capture with a digital camera, the banding profiles obtained were analyzed using a software (AnaGel) specially developed for the storage and analysis of electrophoretic fingerprints. The fingerprints are useful for construction of a data base for identification of cell lines by comparison to reference profiles as well as comparison of similar lines from different sources and periodic follow-up of cells in culture.

Expression of a hantavirus N protein and its efficacy as antigen in immune assays

Hantavirus cardiopulmonary syndrome (HCPS) has been recognized as an important public heath problem. Five hantaviruses associated with HCPS are currently known in Brazil: Juquitiba, Araraquara, Laguna Negra-like, Castelo dos Sonhos, and Anajatuba viruses. The laboratory diagnosis of HCPS is routinely carried out by the detection of anti-hantavirus IgM and/or IgG antibodies. The present study describes the expression of the N protein of a hantavirus detected in the blood sample of an HCPS patient. The entire S segment of the virus was amplified and found to be 1858 nucleotides long, with an open reading frame of 1287 nucleotides that encodes a protein of 429 amino acids. The nucleotide sequence described here showed a high identity with the N protein gene of Araraquara virus. The entire N protein was expressed using the vector pET200D and the Escherichia coli BL21 strain. The expression of the recombinant protein was confirmed by the detection of a 52-kDa protein by Western blot using a pool of human sera obtained from HCPS patients, and by specific IgG detection in five serum samples of HCPS patients tested by ELISA. These results suggest that the recombinant N protein could be used as an antigen for the serological screening of hantavirus infection.

Salt intake and blood pressure in the University of Asuncion-Paraguay youths: a preliminary study

INTRODUCTION: High salt intake is a major risk factor related to many cardiovascular and renal diseases. World Action on Salt and Health is a newly formed coalition of heath professionals whose goal is to implement changes in salt consumption in their respective countries for the goal of reducing blood pressure. In the same vein, we have decided to study the amount of salt intake in Paraguay to determine if a relationship exists between salt intake and blood pressure. OBJECTIVE: A preliminary study was undertaken to determine salt intake in Paraguay and its relationship with blood pressure, in order to implement a national program to combat hypertension. METHODS: Cross-sectional, observational study of 72 students from various universities in Asuncion (age range 22-30 years). Sodium excretion in 24-hour urine samples and blood pressure were measured. Assuming a steady state, urinary sodium excretion was converted into grams of salt ingested per day. RESULTS: Only 7% of the 72 participants had a salt intake less than the recommended maximum of 5 g/day. Forty-six percent had a blood pressure between 120-139 mmHg and 3% had stage 1 hypertension. There was no significant relationship between sodium excretion and blood pressure. CONCLUSION: Salt intake and blood pressure were found to be significantly elevated in young adults in Paraguay and argues for the importance of instituting a national campaign to reduce salt intake in this society.

Liuskekaasun mahdollisuudet ja haasteet energianlähteenä

Tässä kandidaatintyössä tarkastellaan liuskekaasun haasteita ja mahdollisuuksia energianlähteenä nyt sekä lähitulevaisuudessa. Työn tarkoituksena on tarjota tietoa liuskekaasusta ja sen hyödyntämisestä yleisesti maailmalla sekä tarkemmin Euroopassa. Suurimmat edut paikallisesta liuskekaasuntuotannosta ovat riippuvuuden väheneminen tuontikaasusta sekä mahdollisuus hyödyntää maakaasua polttoaineena suurempipäästöisten polttoaineiden tilalla. Tuotannon kehittymistä hidastavat maailmalla epäilyt ympäristövaikutuksista sekä varsinkin Euroopassa puutteellinen lainsäädäntö ja poliittinen vastustus. Liuskekaasulla tulee olemaan tärkeä rooli maakaasun kulutuksen kasvun tyydyttämisessä tulevaisuudessa. Epäkonventionaalisen maakaasutuotannon osuuden ennakoidaan olevan 60 prosenttia kaikesta maakaasuntuotannon kasvusta vuoteen 2040 mennessä, josta taas liuskekaasun osuuden arvioidaan kattavan yli puolet.

Geochemistry and mineralogical association of heavy metal contaminants in fine grained sediment, Welland River, Southern Ontario /

This investigation of geochemistry and mineralogy of heavy metals in fine grained (<63^m) sediment of the Welland River was imdertaken to: 1) describe metal dispersion patterns relative to a source, identify minerals forming and existing at the outfall region and relate sediment particle size to chemistry; 2) to delineate sample handling, preparation and evaluate, modify and develop analytical methods for heavy metal analysis of complex environmental samples. Ajoint project between Brock University and Geoscience Laboratories was initiated to test a contaminated site of the Welland River at the base of Atlas Speciality Steels Co. Methods were developed and utilized for particle size separation and two acid extraction techniques: 1) Partial extraction; 2) Total extraction. The mineralogical assessment identified calcite, dolomite, quartz and clays. These minerals are typical of the carbonate-shale rock basement of the Niagara Peninsula. Minerals such as, mullite and ferrocolumbite were found at the outfall region. These are not typical of the local geology and are generally associated with industrial pollutants. Partial and total extraction techniques were used to characterize the sediments based on chemical distribution, elemental behaviour and analytical differences. The majority of elements were lower in concentration in the partial extraction technique; suggesting these elements are bound in an acid extractable phase (exchangeable, organic and carbonate phases). The total extraction technique yielded higher elemental concentrations taking difficult oxides and silicates into solution. Geochemical analyses of grain size separates revealed that heavy metal (Co, Ni, V, Mn, Fe, Ba) concentrations did not increase with decreasing grain size. This is a function of the anthropogenic mill scale input into the river. The background elements (Sc, Y, Sr, Mg, Al and Ti) showed an increase in concentration to the finest grain size suggesting that it is directly related to the local mineralogy and geology. Dispersion patterns ofmetals fall into two distinct categories: 1) the heavy metals (Co, Cu, Ni, Zn, V and Cr), and 2) the background elements (Be, Sc, Y, Sr, Al and Ti). The heavy metals show a marked increase in the outfall region, while the background elements show a significant decrease at the outfall. This pattern is attributed to a "dilution effect" ofthe natural sediments by the anthropogenic mill scale sediments. Multivariant statistical analysis and correlation coefficient matrix results clearly support these results and conclusions. These results indicate the outfall region ofthe Welland River is highly contaminated with to heavy metals from the industrialized area of Welland. A short distance downstream, the metal concentrations return to baseline geochemical levels. It appears, contaminants rapidly come out of suspension and are deposited in close proximity to the source. Therefore, it is likely that dredging the sediment from the river may cause resuspension of contaminated sediments, but may not distribute the sediment as far as initially anticipated.

Reflective practice and the novice nurse /

The importance of reflective practice to the novice nurse was explored in this study. The novice nurse, for the purpose of this study, was defined as a Registered Nurse who graduated from an accredited nursing program within a 1 2-month period prior to the data collection date and who had no prior experience as a Registered Nurse before graduation. All of the nurses enrolled in this study were female. This study explored the perceived link between transformational learning and reflective practice, and whether there may be a need to standardize a conceptual framework and definition for reflective practice in nursing academia. The literature that was reviewed for this study indicated that there were inconsistencies in the application of reflective practice within academic curriculums. The literature did identify that the majority of academic scholars have agreed that reflection is paramount in the development of critical thinking skills, self-awareness, and selfdirection. And, while all of these skills drive professional practice and effect excellent patient care, institutional health care has been reticent to support the value of reflective practice because of a lack of empirical data sets. The 4 novice Registered Nurses who participated in this study were asked 4 openended questions that provided a foundation for comparing the novice nurses' experiences, interpretations, and perceptions of reflective practice. These nurses participated in individual audiotaped interviews with the researcher. The study was based upon Heath's (1998) model of "Theory hitegration via Reflective Practice." The results demonstrated that reflective practice was significant to the novice nurse and was used as a tool to identify further learning needs. Transformational learning through reflection was described by the study participants. The findings within this study are consistent with previous work done in the area of reflection and the novice nurse.

A hypothesis for the geochemical anomaly in the North Creek Watershed /

A regional geochemical reconnaissance by bottom stream sediment sampling, has delineated an area of high metal content in the north central sector of the North Creek Watershed. Development of a geochemical model, relating to the relative chemical concentrations derived from the chemical analyses of bottom sediments, suspended sediments, stream waters and well waters collected from the north central sector, was designed to discover the source of the anomaly. Samples of each type of material were analysed by the A.R.L. Direct Reading Multi-element Emission Spectrograph Q.A. 137 for elements: Na, K, Ca, Sr, Si, As, Pb, Zn, Cd, Ni, Ti, Ag, Mo, Be, Fe, AI, Mn, Cu, Cr, P and Y. Anomalous results led to the discovery of a spring, the waters of which carried high concentrations of Zn, Cd, Pb, As, Ni, Ti, Ag, Sr and Si. In addition, the spring waters had high concentrations of Na, Ca, Mg, 504 , alkalinity, N03' and low concentrations of K, Cl and NH3. Increased specific conductivity (up to 2500 ~mho/cm.) was noted in the spring waters as well as increased calculated total dissolved solids (up to 2047 mg/l) and increased ionic strength (up to 0.06). On the other hand, decreases were noted in water temperature (8°C), pH (pH 7.2) and Eh (+.154 volts). Piezometer nests were installed in the anomalous north central sector of the watershed. In accordance with the slope of the piezometric surface from wells cased down to the till/bedrock interface, groundwater flow is directed from the recharge area (northwest of the anomaly) towards the artesian spring via the highly fractured dolostone aquifer of the Upper Eramosa Member. The bedrock aquifer is confined by the overlying Halton till and the underlying Lower Eramosa Member (Vinemount Shale). The oxidation of sphalerite and galena and the dissolution of gypsum, celestite, calcite, and dolomite within the Eramosa Member, contributed its highly, dissolved constituents to the circulating groundwaters, the age of which is greater than 20 years as determined by tritium dating. Groundwater is assumed to flow along the Vinemount Shale and discharge as an artesian spring where the shale unit becomes discontinuous. The anomaly is located on a topographic low where bedrock is close to the surface. Thermodynamic evaluation of the major ion speciation from the anomalous spring and surface waters, showed gypsum to be supersaturated in these spring waters. Downstream from the spring, the loss of carbon dioxide from the spring waters resulted in the supersaturation with respect to calcite, aragonite, magnesite and dolomite. This corresponded with increases in Eh (+.304 volts) and pH (pH 8.5) in the anomalous surface waters. In conclusion, the interaction of groundwaters within the highly, mineralized carbonate source (Eramosa Member) resulted in the characteristic Ca*Mg*HC03*S04 spring water at the anomalous site, which appeared to be the principle effect upon controlling the anomalous surface water chemistry.