977 resultados para Healing process


Relevância:

60.00% 60.00%

Publicador:

Resumo:

Objective: to evaluated the effect of treating root-adhered necrotic periodontal ligament (PDL) with citric acid on the healing process in delayed rat tooth replantation. Material and Methods: Forty Wistar rats, assigned to 4 groups (n=10), had their upper right incisor extracted and kept dry on a workbench. For Group I (control), the teeth were replanted after a 5 min extra-alveolar time. For the other groups, replantation was hydroxide-based paste and the teeth were replanted with no root surface treatment. In Group III, the teeth were immersed in citric acid (pH 1) for replanted. In Group IV, instead of the immersion, the roots were scrubbed with gauze soaked in citric acid and the teeth were replanted. The animals difference (p > 0.05) was found among the groups regarding the areas difference (p < 0.05) between the control group and Group IV regarding ankylosis. The control group showed the least replacement resorption percent means compared to the other groups (p < 0.05). The root structure was more affected by replacement resorption and ankylosis in Group IV statistically (p > 0.05). Conclusion: the treatment of root surface-adhered necrotic periodontal ligament with citric acid was not able to prevent the delayed rat tooth replantation.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Objective: to evaluated the effect of treating root-adhered necrotic periodontal ligament (PDL) with citric acid on the healing process in delayed rat tooth replantation. Material and Methods: Forty Wistar rats, assigned to 4 groups (n=10), had their upper right incisor extracted and kept dry on a workbench. For Group I (control), the teeth were replanted after a 5 min extra-alveolar time. For the other groups, replantation was done after 60 min. In Group II, the root canals were filled with a calcium hydroxide-based paste and the teeth were replanted with no root surface treatment. In Group III, the teeth were immersed in citric acid (pH 1) for 3 min, the canals were filled with calcium hydroxide and the teeth were replanted. In Group IV, instead of the immersion, the roots were scrubbed with gauze soaked in citric acid and the teeth were replanted. The animals were sacrificed 60 days postoperatively. Results: Regarding replacement resorption, there was statistically significant difference (p < 0.05) between the control group and the other three groups. No statistically significant difference (p > 0.05) was found among the groups regarding the areas of inflammatory resorption. There was also a statistically significant difference (p < 0.05) between the control group and Group IV regarding ankylosis. The control group showed the least replacement resorption percent means compared to the other groups (p < 0.05). The root structure was more affected by replacement resorption and ankylosis in Group IV compared to the Groups II and III, but this difference was not significant statistically (p > 0.05). Conclusion: the treatment of root surface-adhered necrotic periodontal ligament with citric acid was not able to prevent the occurrence of ankylosis, root resorption and inflammatory resorption in delayed rat tooth replantation.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Several therapeutic approaches have been proposed in order to achieve an esthetically pleasing and harmony smile. The present study reports a case in which gingivectomy was performed in the region of the upper anterior teeth combined with osteotomy in the region of the upper posterior teeth and removal of the superior labial frenum to promote harmony smile by decreasing the gummy smile and adequacy of buccal corridor. Osteoplasty gingivoplasty, and frenectomy procedures were planned and performed in a single session. The extraction of the maxillary third molars was also performed in order to avoid postoperative complications. Follow-up visits were performed at 7, 15, 30 and 180 days postoperatively. At 7 days, the gingival tissue was in the initial process of healing, demonstrating inflammation still in evidence. At 15 days, the gingival tissue was found in the final healing process, showing characteristics of normal health gum. At 30 days, there was complete healing of gingival tissues without clinical exposure of the root surfaces. After 180 days, tissues remained in healthy, demonstrating the success of the treatment. Patient showed complete satisfaction with the results. It can be concluded that, when properly indicated, the combination of gingivectomy, osteotomy and frenectomy procedures are promising therapeutic approaches for promoting harmony smile.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Introduction: It has been suggested that bone grafts combined with platelet rich plasma (PRP) present greater density than bone grafts without PRP after healing process. However, this result may depend on proportion PRP/autogenous bone (AB) graft used. Objective: The purpose of this study was to analyze radiographically the influence of the proportion PRP/particulate autogenous bone (AB) graft on bone healing in surgically created criticalsize defects (CSD) in rat calvaria. Material and method: 50 rats were divided into 5 groups: C, AB, AB/PRP-50, AB/PRP-100 and AB/PRP-150. A 5 mm diameter CSD was created in the calvarium of each animal. In Group C the defect was filled by blood clot only. In Group AB the defect was filled with 0.01 mL of AB graft. In groups AB/ RP-50, AB/PRP-100 and AB/PRP-150 the defects were filled with 0.01 mL of AB graft combined with 50, 100 and 150 µL of PRP, respectively. All animals were euthanized at 30 days post-operative. Standardized radiographic images of the rat calvaria were obtained using Digora System (Soredex, Finland). The images were evaluated by three examiners using scores that indicated the percentage of radiopacity of the defect. The obtained data were subjected to statistical analysis (Kruskal-Wallis test, p < 0.05). Result: Group C presented radiopacity significantly lower than groups AB, AB/PRP-50, AB/PRP-100 and AB/PRP-150. Group AB/PRP-50 showed radiopacity significantly greater than groups AB/PRP-100 and AB. Conclusion: It can be concluded that the proportion PRP/AB graft influences bone healing in CSD in rat calvaria.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Biomaterials such as membrane barriers and/or bone grafts are often used to enhance periapical new bone formation. A combination of apical surgery and these biomaterials is one of the latest treatment options for avoiding tooth extraction. In case of periapical lesions, guided tissue regeneration (GTR) is attempted to improve the self-regenerative healing process by excluding undesired proliferation of the gingival connective tissue or migration of the oral epithelial cells into osseous defects. In many cases, GTR is necessary for achieving periodontal tissue healing. This report describes the healing process after surgery in a challenging case with a long-term followup. In this case report, endodontic surgery was followed by retrograde sealing with mineral trioxide aggregate (MTA) in the maxillary right central incisor and left lateral incisor. Apicectomy was performed in the maxillary left central incisor and a 1-mm filling was removed. The bone defect was filled with an anorganic bone graft and covered with a decalcified cortical osseous membrane. No intraoperative or postoperative complications were observed. After 13 years of follow-up, the patient showed no clinical signs or symptoms associated with the lesion and radiographic examination showed progressive resolution of radiolucency. In conclusion, the combination of apical surgery and regenerative techniques can successfully help the treatment of periapical lesions of endodontic origin and is suitable for the management of challenging cases

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Accidents caused by thermal, chemical, electrical or radioactive agents cause skin lesions causing burns of varying degrees. The therapeutic approach aims to restore damaged tissues and involves a wide range of products on the market. This study aims to evaluate the use of biological dressing, biotech product developed at the Blood Center of Botucatu / UNESP obtained from fresh frozen plasma or platelet concentrate with in vitro addition of thrombin and calcium gluconate. This addition in the platelet concentrate, intended to release the active growth factors of the platelets granules on the healing process. The study of the effectiveness of Platelet Gel home made in Wistar rats was established, in agreement with scald burns, comparing efficacy and cost of Platelet Gel with usual hospital -based treatment collagenase + chloramphenicol plus cost analysis through pharmacoeconomics. We used 25 Wistar rats were divided into 3 treatment groups: Group A, Collagenase + Chloramphenicol; Group B, Platelet Gel and C, control. The products were applied every other day for 30 days in animals. In group A, there was the presence of erythema and crust in all animals. The exudates was indentified 2/10 animals. For the Group B, we observed the presence of erythema and crust at all and no presence of exudates. In group C all the animals showed erythema with no presence of exudates and scab occurred in 1/10. Statistical analysis showed significant difference ( p < 0.0 ) for crust formation between Groups B and C. In the histological analysis, group A showed a slight amount of blood vessels and collagen fibers, moderate amounts of macrophages and fibroblasts was observed while B and C groups showed moderate amounts of blood vessels, macrophages and fibroblasts and discreet presence of collagen fibers. The re-epithelialization occurred in most animals of all groups without significant statistical differences. For the aspects of pharmacoeconomics, the platelet gel presented a better cost - effectiveness in relation to treatment based on collagenase / chloramphenicol. In light of the ethical aspects of the raw material is the result of spontaneous blood donation, the proposal should have biological dressings productions the responsibility of public blood transfusion centers for free distribution. This may point to the production chain of Brazilian blood banks like special blood components for use no intravenous.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Background: Cutaneous lesions by Pythium insidiosum infection are commonly observed in horses, especially in those living at flooded environments. Equine pythiosis is characterized by the development of tumoral masses that are frequently located at distal limbs, ventral abdomen, thorax, breast and face. The lesions are usually granulomatous, serosanguineous and ulcerated, most often destroyed by self-mutilation due to the intense pruritus. The proposed treatment includes surgical excision followed by antifungal drugs administration, which can be done systemically or topically. Amphotericin B and dimethyl sulfoxide (DMSO) in association has been successfully used for cutaneous pythiosis topical treatment due to the DMSO property to carry any substance through plasmatic membranes. Case: The present report concerns a 12-year-old mixed breed gelding presenting with self-mutilation of a tumoral mass located at the left flank. The owners reported that the horse had initially presented a small wound that had evolved to a 20-cm in diameter mass in 4 weeks. Tissue samples were collected, processed and stained by the Gomori's methenamine silver (GMS) method. The histopathological analysis revealed Pythium insidiosum hyphae in a granulomatous tissue, especially located at peripheral region, where kunkers were present. Surgical excision of the mass followed by cauterization was indicated as initial treatment, and due to financial reasons, the owners elected only the topical antifungal therapy to control the fungus infection after surgery. Flunixin meglumine was also administrated for five days aiming the control of pain and inflammation. The wound was cleaned with povidone-iodine solution and rinsed with a solution containing, 50 mg, of amphotericin B in 10 mL of sterile water and 10 mL of DMSO. This procedure was carried Out twice a day. The wound healed fast due to an excellent centripetal epithelialization. and the horse was discharged after 64 days showing only 5% of the initial wound area. The owner reported by telephone the complete healing and hair growth 10 days after discharge. Discussion: Despite the atypical location of the tumoral lesion described at the present report, the history and clinical manifestations, especially the intense pruritus, showed similarity with other characteristic reports of equine cutaneous pythiosis. The diagnosis was confirmed by the histopathological examination showing hyphae structures, as described to be evidences of the presence of Pythium insidiosum in the tissue. The surgical procedure was the first step to provide remission of clinical signs, and one day after surgery the pruritus desapeared. After excision of the granulomatous tissue and cauterization, daily topical administration of amphotericin B associated with DMSO was effective in destroying the infectious agent, as observed by the excellent epithelization. A pink granulation tissue grew up providing an ideal surface for epithelial migration and the healing process progressed quickly. Centripetal epithelialization reduced the wound area until 3% of the initial area in 64 days of treatment, when the remaining wound was found almost completely healed and covered with hair. At the present report, the horse presenting pythiosis was only topically treated. The recommended therapy using amphotericin B and DMSO solution was effective, economically viable and low risk, considering that the systemic antifungal therapy usually suggested is expensive and extremely nephrotoxic. The atypical location of the lesion on the left flank shows that any anatomical region can be affected by the fungus, since the conditions for its development were present.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Low-level laser irradiation (LLLI) and recombinant human bone morphogenetic protein type 2 (rhBMP-2) have been used to stimulate bone formation. LLLI stimulates proliferation of osteoblast precursor cells and cell differentiation and rhBMP-2 recruits osteoprogenitor cells to the bone healing area. This in vivo study evaluated the effects of LLLI and rhBMP-2 on the bone healing process in rats. Critical bone defects were created in the parietal bone in 42 animals, and the animals were divided into six treatment groups: (1) laser, (2) 7 mu g of rhBMP-2, (3) laser and 7 mu g of rhBMP-2, (4) 7 mu g of rhBMP-2/monoolein gel, (5) laser and 7 mu g rhBMP-2/monoolein gel, and (6) critical bone defect controls. A gallium-aluminum-arsenide diode laser was used (wavelength 780 nm, output power 60 mW, beam area 0.04 cm(2), irradiation time 80 s, energy density 120 J/cm(2), irradiance 1.5 W/cm(2)). After 15 days, the calvarial tissues were removed for histomorphometric analysis. Group 3 defects showed higher amounts of newly formed bone (37.89%) than the defects of all the other groups (P < 0.05). The amounts of new bone in defects of groups 1 and 4 were not significantly different from each other (24.00% and 24.75%, respectively), but were significantly different from the amounts in the other groups (P < 0.05). The amounts of new bone in the defects of groups 2 and 5 were not significantly different from each other (31.42% and 31.96%, respectively), but were significantly different from the amounts in the other groups (P < 0.05). Group 6 defects had 14.10% new bone formation, and this was significantly different from the amounts in the other groups (P < 0.05). It can be concluded that LLLI administered during surgery effectively accelerated healing of critical bone defects filled with pure rhBMP-2, achieving a better result than LLLI alone or the use of rhBMP-2 alone.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Primary stability of stems in cementless total hip replacements is recognized to play a critical role for long-term survival and thus for the success of the overall surgical procedure. In Literature, several studies addressed this important issue. Different approaches have been explored aiming to evaluate the extent of stability achieved during surgery. Some of these are in-vitro protocols while other tools are coinceived for the post-operative assessment of prosthesis migration relative to the host bone. In vitro protocols reported in the literature are not exportable to the operating room. Anyway most of them show a good overall accuracy. The RSA, EBRA and the radiographic analysis are currently used to check the healing process of the implanted femur at different follow-ups, evaluating implant migration, occurance of bone resorption or osteolysis at the interface. These methods are important for follow up and clinical study but do not assist the surgeon during implantation. At the time I started my Ph.D Study in Bioengineering, only one study had been undertaken to measure stability intra-operatively. No follow-up was presented to describe further results obtained with that device. In this scenario, it was believed that an instrument that could measure intra-operatively the stability achieved by an implanted stem would consistently improve the rate of success. This instrument should be accurate and should give to the surgeon during implantation a quick answer concerning the stability of the implanted stem. With this aim, an intra-operative device was designed, developed and validated. The device is meant to help the surgeon to decide how much to press-fit the implant. It is essentially made of a torsional load cell, able to measure the extent of torque applied by the surgeon to test primary stability, an angular sensor that measure the relative angular displacement between stem and femur, a rigid connector that enable connecting the device to the stem, and all the electronics for signals conditioning. The device was successfully validated in-vitro, showing a good overall accuracy in discriminating stable from unstable implants. Repeatability tests showed that the device was reliable. A calibration procedure was then performed in order to convert the angular readout into a linear displacement measurement, which is an information clinically relevant and simple to read in real-time by the surgeon. The second study reported in my thesis, concerns the evaluation of the possibility to have predictive information regarding the primary stability of a cementless stem, by measuring the micromotion of the last rasp used by the surgeon to prepare the femoral canal. This information would be really useful to the surgeon, who could check prior to the implantation process if the planned stem size can achieve a sufficient degree of primary stability, under optimal press fitting conditions. An intra-operative tool was developed to this aim. It was derived from a previously validated device, which was adapted for the specific purpose. The device is able to measure the relative micromotion between the femur and the rasp, when a torsional load is applied. An in-vitro protocol was developed and validated on both composite and cadaveric specimens. High correlation was observed between one of the parameters extracted form the acquisitions made on the rasp and the stability of the corresponding stem, when optimally press-fitted by the surgeon. After tuning in-vitro the protocol as in a closed loop, verification was made on two hip patients, confirming the results obtained in-vitro and highlighting the independence of the rasp indicator from the bone quality, anatomy and preserving conditions of the tested specimens, and from the sharpening of the rasp blades. The third study is related to an approach that have been recently explored in the orthopaedic community, but that was already in use in other scientific fields. It is based on the vibration analysis technique. This method has been successfully used to investigate the mechanical properties of the bone and its application to evaluate the extent of fixation of dental implants has been explored, even if its validity in this field is still under discussion. Several studies have been published recently on the stability assessment of hip implants by vibration analysis. The aim of the reported study was to develop and validate a prototype device based on the vibration analysis technique to measure intra-operatively the extent of implant stability. The expected advantages of a vibration-based device are easier clinical use, smaller dimensions and minor overall cost with respect to other devices based on direct micromotion measurement. The prototype developed consists of a piezoelectric exciter connected to the stem and an accelerometer attached to the femur. Preliminary tests were performed on four composite femurs implanted with a conventional stem. The results showed that the input signal was repeatable and the output could be recorded accurately. The fourth study concerns the application of the device based on the vibration analysis technique to several cases, considering both composite and cadaveric specimens. Different degrees of bone quality were tested, as well as different femur anatomies and several levels of press-fitting were considered. The aim of the study was to verify if it is possible to discriminate between stable and quasi-stable implants, because this is the most challenging detection for the surgeon in the operation room. Moreover, it was possible to validate the measurement protocol by comparing the results of the acquisitions made with the vibration-based tool to two reference measurements made by means of a validated technique, and a validated device. The results highlighted that the most sensitive parameter to stability is the shift in resonance frequency of the stem-bone system, showing high correlation with residual micromotion on all the tested specimens. Thus, it seems possible to discriminate between many levels of stability, from the grossly loosened implant, through the quasi-stable implants, to the definitely stable one. Finally, an additional study was performed on a different type of hip prosthesis, which has recently gained great interest thus becoming fairly popular in some countries in the last few years: the hip resurfacing prosthesis. The study was motivated by the following rationale: although bone-prosthesis micromotion is known to influence the stability of total hip replacement, its effect on the outcome of resurfacing implants has not been investigated in-vitro yet, but only clinically. Thus the work was aimed at verifying if it was possible to apply to the resurfacing prosthesis one of the intraoperative devices just validated for the measurement of the micromotion in the resurfacing implants. To do that, a preliminary study was performed in order to evaluate the extent of migration and the typical elastic movement for an epiphyseal prosthesis. An in-vitro procedure was developed to measure micromotions of resurfacing implants. This included a set of in-vitro loading scenarios that covers the range of directions covered by hip resultant forces in the most typical motor-tasks. The applicability of the protocol was assessed on two different commercial designs and on different head sizes. The repeatability and reproducibility were excellent (comparable to the best previously published protocols for standard cemented hip stems). Results showed that the procedure is accurate enough to detect micromotions of the order of few microns. The protocol proposed was thus completely validated. The results of the study demonstrated that the application of an intra-operative device to the resurfacing implants is not necessary, as the typical micromovement associated to this type of prosthesis could be considered negligible and thus not critical for the stabilization process. Concluding, four intra-operative tools have been developed and fully validated during these three years of research activity. The use in the clinical setting was tested for one of the devices, which could be used right now by the surgeon to evaluate the degree of stability achieved through the press-fitting procedure. The tool adapted to be used on the rasp was a good predictor of the stability of the stem. Thus it could be useful for the surgeon while checking if the pre-operative planning was correct. The device based on the vibration technique showed great accuracy, small dimensions, and thus has a great potential to become an instrument appreciated by the surgeon. It still need a clinical evaluation, and must be industrialized as well. The in-vitro tool worked very well, and can be applied for assessing resurfacing implants pre-clinically.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Einfluss einer Pharmazeutischen Betreuung auf den klinischen Verlauf und die Behandlungsergebnisse von Diabetikern mit Diabetischem Fußsyndrom (DFS) Hintergrund/Rationale: In Deutschland gibt es etwa 6 Millionen Diabetiker und die Tendenz ist steigend. Das Diabetische Fußsyndrom (DFS) stellt eine häufige und besonders gravierende Folgeerkrankung des Diabetes mellitus dar. Jährlich werden in Deutschland ca. 45.000 Amputationen aufgrund des DFS bei Diabetikern durchgeführt. Es verursacht bei den Patienten physische und psychische Beeinträchtigungen und produziert hohe Krankheitskosten. Der Prävention, der Behandlung und der Rezidivprophylaxe des DFS kommt daher ein hoher Stellenwert zu. Ziel dieser Arbeit war es, ein klinisch-pharmazeutisches Betreuungsprogramm für Patienten mit DFS zu erarbeiten und den Einfluss der Pharmazeutischen Betreuung, speziell einer intensivierten Patientenschulung, auf klinische und soziale Behandlungsergebnisse hin zu untersuchen. Es sollte geklärt werden, ob eine zusätzliche pharmazeutische Betreuung Einfluss auf den Wundheilungsverlauf und die Abheilungsrate der Fußläsionen von Diabetikern mit DFS nehmen kann. Methoden: 52 Patienten mit DFS wurden in eine randomisierte, kontrollierte Studie eingeschlossen und im Verhältnis 1:1 einer Interventions- oder Kontrollgruppe zugeteilt. Die Interventionsgruppe wurde kontinuierlich durch einen Apotheker zusätzlich individuell betreut (Anleitung zum sachgerechten Umgang mit Arzneimitteln, Medizinprodukten und Therapiemaßnahmen), die Kontrollgruppe erhielt die übliche medizinische Betreuung. Die Auswirkungen der Intervention auf den klinischen Verlauf der beobachteten Fußläsionen, die Rezidivfreiheit und Rehospitalisierungsrate, aber auch auf die Patientenzufriedenheit, das Patientenwissen und die Lebensqualität wurden untersucht. Jeder Patient wurde über einen Zeitraum von 12 Monaten beobachtet. Ergebnisse: Die Studienergebnisse belegen einen positiven Einfluss der Pharmazeutischen Betreuung auf die klinischen Endpunkte der Diabetiker mit DFS. Die Wundheilung der Läsionen in der Interventionsgruppe, bezogen auf Abheilungsdauer und -rate, konnte klinisch positiv beeinflusst werden. Des weiteren konnte in der Interventionsgruppe die Anzahl an neu aufgetretenen Läsionen, sowie weiterer Krankenhausaufenthalte um jeweils fast 50% verringert werden. Durch die Pharmazeutische Betreuung konnte die Patientenzufriedenheit mit der Behandlung deutlich gesteigert werden. Entsprechendes fand sich für das Patientenwissen und die Lebensqualität.