Moderate-depth benthic habitats of St. John, U.S. Virgin Islands

The National Oceanic and Atmospheric Administration’s (NOAA) Center for Coastal Monitoring and Assessment’s (CCMA) Biogeography Branch and the U.S. National Park Service (NPS) have completed mapping the moderate-depth marine environment south of St. John. This work is an expansion of ongoing mapping and monitoring efforts conducted by NOAA and NPS in the U.S. Caribbean. The standardized protocols used in this effort will enable scientists and managers to quantitatively compare moderate-depth coral reef ecosystems around St. John to those throughout the U.S. Territories. These protocols and products will also help support the effective management and conservation of the marine resources within the National Park system.

St. John, USVI mission report, NOAA/NOS/NCCOS/CCMA/Biogeography Branch, July 6 - July 17, 2009

The intent of this field mission was to continue ongoing efforts: (1) to spatially characterize and monitor the distribution, abundance and size of reef fishes, and the abundance of macroinvertebrates (conch, Diatema, lobster) within and around the waters of the Virgin Islands National Park (VIIS) and newly established Virgin Islands Coral Reef National Monument (VICR), (2) to correlate this information to in-situ data collected on associated habitat parameters, (3) to use this information to establish the knowledge base necessary for enacting management decisions in a spatial setting and (4) to establish the efficacy of those management decisions. An additional focus this year, was to evaluate a new habitat data collection method for RHA sites (MSR and some Coral Bay sites). There are concerns that the cylinder habitat data are not reflective of the fish transect habitat. To address this, we collected habitat data at 5x4 m increments along the transect in addition to data collected using the cylinder method. We are currently assessing the potential differences between these methods and preliminary results indicate that the average difference of coral cover estimates between the two methods was 4.1% (range 0-11%) based on 16 sample sites. In addition, Erinn Muller, a Nancy Foster Fellowship recipient, collaborated with the Biogeography Branch to examine the spatial distribution of coral diseases, to provide baseline information on disease prevalence over varying spatial scales and to establish spatial distributions of coral diseases around St. John.

Temporal trends in reef fish assemblages inside Virgin Islands National Park and around St. John, U.S. Virgin Islands, 1988-2006

This report is a result of long-term fish monitoring studies supported by the National Park Service (NPS) at the Virgin Islands National Park since 1988 and is now a joint NPS and NOAA collaboration. Reef fish monitoring data collected from 1988 to 2006 within Virgin Islands National Park (VINP) and adjacent reefs around St. John, U.S. Virgin Islands (USVI) were analyzed to provide information on the status of reef fishes during the monitoring period. Monitoring projects were initiated by the National Park Service (NPS) in the 1980s to provide useful data for evaluation of resources and for development of a long-term monitoring program. Monthly monitoring was conducted at two reef sites (Yawzi Point and Cocoloba Cay) starting in November 1988 for 2.5 years to document the monthly/seasonal variability in reef fish assemblages. Hurricane Hugo (a powerful Category 4 storm) struck the USVI in September 1989 resulting in considerable damage to the reefs around St. John. Abundance of fishes was lower at both sites following the storm, however, a greater effect was observed at Yawzi Point, which experienced a more direct impact from the hurricane. The storm affected species differently, with some showing only small, short-term declines in abundance, and others, such as the numerically abundant blue chromis (Chromis cyanea), a planktivorous damselfish, exhibiting a larger and longer recovery period. This report provides: 1) an evaluation of sampling methods, sample size, and methods used during the sampling period, 2) an evaluation of the spatial and temporal variability in reef fish assemblages at selected reef sites inside and outside of VINP, and 3) an evaluation of trends over 17 years of monitoring at the four reference sites. Comparisons of methods were conducted to standardize assessments among years. Several methods were used to evaluate sample size requirements for reef fish monitoring and the results provided a statistically robust justification for sample allocation.

Mission report: a strategy to inventory, characterize, and monitor the marine region within and around the National Park and Monument boundaries of St. John, USVI, July 21- July 31, 2008

The intent of this field mission was to continue ongoing efforts: (1) to spatially characterize and monitor the distribution, abundance and size of both reef fishes and conch within and around the waters of the Virgin Islands National Park (VIIS) and newly established Virgin Islands Coral Reef National Monument (VICR), (2) to correlate this information to in-situ data collected on associated habitat parameters, (3) to use this information to establish the knowledge base necessary for enacting management decisions in a spatial setting and to establish the efficacy of those management decisions. This work is supported by the National Park Service and NOAA’s Coral Reef Conservation Program’s Caribbean Coral Reef Ecosystem Monitoring Project. The report highlights the successes of this mission.

Characterisation and simulation of asphalt road surfaces

Accurate simulation of rolling-tyre vibrations, and the associated noise, requires knowledge of road-surface topology. Full scans of the surface types in common use are, however, not widely available, and are likely to remain so. Ways of producing simulated surfaces from incomplete starting information are thus needed. In this paper, a simulation methodology based solely on line measurements is developed, and validated against a full two-dimensional height map of a real asphalt surface. First the tribological characteristics-asperity height, curvature and nearest-neighbour distributions-of the real surface are analysed. It is then shown that a standard simulation technique, which matches the (isotropic) spectrum and the probability distribution of the height measurements, is unable to reproduce these characteristics satisfactorily. A modification, whereby the inherent granularity of the surface is enforced at the initialisation stage, is introduced, and found to produce simulations whose tribological characteristics are in excellent agreement with the measurements. This method will thus make high-fidelity tyre-vibration calculations feasible for researchers with access to line-scan data only. In addition, the approach to surface tribological characterisation set out here provides a template for efficient cataloguing of road textures, as long as the resulting information can subsequently be used to produce sample realisations. A third simulation algorithm, which successfully addresses this requirement, is therefore also presented. © 2011 Elsevier B.V.

Yield isopleths of Tilapia esculenta Graham 1928 in Lake Victoria and Tilapia nilotica (Linnaeus) 1757 in Lake Albert

The yield equation given by BEVERTON and HOLT (1957) has several parameters which are difficult to estimate for tropical freshwater fish species. Nevertheless, some simplifying assumptions can be made and the most relevant parameters used to enable the construction of yield isopleths. Tilapia esculenfa has the following parameters: maximum length (L ∞=33.8 c.m. growth rate (K) = 0.32, natural mortality rate (M)=0.17 and the length at maturity (1 m)=22 cm. The optimum yield is obtained by catching the fish at a length of first capture of 26 em and a fishing mortality rate of 0.5. Tilapia nilotica with L ∞=49 cm, 1 m=36 cm, K=0.50 and M= 0.30 gives optimum yield when caught at a length of first capture of 35-36 cm with a fishing mortality rate of 0.5-0.6. The stuned Tilapia nilotica of Lake Albert has L ∞=17 cm, K=2.77,1 m=12 cm and M=3.37. With such a very high natural mortality, maximum yields would be obtained hy using a length of first capture less than 9 cm and a fishing mortality rate exceeding 1.8.

Preliminary observations on cage culture of Tilapia esculenta Graham and Tilapia xillii (Gervais) in Lake Victoria waters, at the Freshwater Fisheries Institute, Nyegezi, Tanzania

Cage culture of Tilapia is not suggested as a substitute for any known techniques in fish culture, but as one of the various techniques of obtaining more fish under controlled conditions. This fact has been very well accepted in various countries. Whererever facilities exist, this line of fish culture should be vigorously explored as a possible avenue in increasing fish production. High density stocking, management under controlled conditions, easy technique of fabricating the cage at relatively low cost, having no demand on land area, absence of prolific and effective breeding and easy availability of fish when a person needs it are a few of the attractions of the technique. The studies indicate that it is desirable to have different meshes for the cages, such as, small meshed cages for rearing fry to fingerlings stages, and larger meshed cages for rearing fingerlings to table sized fishes. II' the meshes are small, the resistance will be more and less water wilt pass through. While feeding with powdered food material, because of brisk activity of feeding fish, a part of the feed appeared wasted. This can be easily overcome if we would resort to feeding fish with cheap pelleted feeds which will no doubt reduce wastage. Precaution has to be taken against damage of the net and thereby loss of fish and against poaching by unauthorised persons. In the present attempt has been demonstrated the possibility of utilizing locally available species of Tilapia for cage culture and obtaining moderately satisfactory growth rates.

Growth rates of Tilapia esculenta (Graham) and Tilapia zillii (Gervais) under cultivation in ponds at Nyegezi, Tanzania

Aquaculture in Tanzania is still on a subsistence level and most of the ponds are maintained as part time job. The ponds are too small, shallow and over crowded with stunted Tilapia spp. In the present paper the results of experiments conducted in ponds at Nyegezi with T. esculenta and T. zillii are presented. This was part of an overall project of developing techniques of fish cultures with Tilapia under the limited existing conditions at Nyegezi. In a mono - species culture experiement with Tilapia zillii in nine month's time an average size of 172.8 mm/115.0 g was attained. In another experiment with T. zillii and T. esculenta in thirteen month's time, T. zillii attained an average size of 180.2mm/106.6 g and T. esculenta 193.6 mm/118.8 g. In another experiment with intensive feeding schedule an average size of 179.3 mm/126.6 g was attained by T. zillii and 191.0 mm/125.0 g by T. esculenta in four month's time. A locally prepared supplimentary feed with local Brewery Waste and Fish Meal (10:1) was readily accepted by both species of Tilapia. T. zillii voraciously fed on Cabbage leaves, Cauliflower leaves, Chinese cabbage leaves, Cassava leaves and on the common weed Comalina sp. Though all the items mentioned above were readily accepted by T. zillii feeding with Comaltna sp. was the easiest and most convenient because of its availability. In an intensive feeding experiment with vegetable leaves/Comalina sp. and the locally prepared supplimentary feed the fishes attained table size in four months time. Cement cistens of 5 X 3 X 1½ m size could be conveniently used for breeding both species of Tilapia. T. zillii had semi adhesive eggs and they were deposited on the sides of the cement wall. The number of young ones in a brood ranged from 160 to 314 in T. esculenta and 687 to 4,356 in T. zillii.

Prediction of tread block forces for a free-rolling tyre in contact with a rough road

This paper describes a new approach to model the forces on a tread block for a free-rolling tyre in contact with a rough road. A theoretical analysis based on realistic tread mechanical properties and road roughness is presented, indicating partial contact between a tread block and a rough road. Hence an asperity-scale indentation model is developed using a semi-empirical formulation, taking into account both the rubber viscoelasticity and the tread block geometry. The model aims to capture the essential details of the contact at the simplest level, to make it suitable as part of a time-domain dynamic analysis of the coupled tyre-road system. The indentation model is found to have a good correlation with the finite element (FE) predictions and is validated against experimental results using a rolling contact rig. When coupled to a deformed tyre belt profile, the indentation model predicts normal and tangential force histories inside the tyre contact patch that show good agreement with FE predictions. © 2012 Elsevier B.V..

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers. Stripe width and cavity length of the laser were 1.8 and 300 pm, respectively. After being cavity coated. and transistor outline (TO) packaged, the lasers showed high performance in practice. The threshold current was about 13 +/- 4 mA, the operation current and the lasing spectrum were about 58 6 mA and 1689 +/- 6 nm at 6-mW output power, respectively. Moreover, the maximum output power of the lasers was above 20 mW.