Estudio en laboratorio sobre la tasa de mortalidad, tiempo de generación y reproducción de Bemisia tabaci (Gennadius) en tomate

El estudio se llevó a cabo en el Laboratorio de Epidemiología y Manejo de Virus en la Escuela de Sanidad Vegetal de la Universidad Nacional Agraria en Managua. Pupas de Bemisia tabaci (Gennadius) fueron colectados originalmente en plantas de frijol en Estelí, para después establecer una cría de mosca blanca limpia de virus, en plantas de tomate Lycopersicon esculentum Mili., variedad VF 134. El experimento se realizó durante el período de septiembre a diciembre de 1992 bajo condiciones del laboratorio con temperatura de 26°C y con 80% de humedad relativa. El experimento consistió en colocar hembras de mosca blanca recien eclosionadas en una jaula de clip (clip cage) sobre una planta de tomate. La jaula fue retirada a las 24 horas, trasladando la hembra a una nueva planta. Se continúo transfiriendo las hembras a una nueva planta cada día hasta su muerte. Cada postura de huevos fue cuantificada y observada durante los siguientes días a fin de registrar el número de los huevos que eclosionaron a ninfas, el número de ninfas que pasaron a adultos y el tiempo transcurrido desde la postura hasta la emergencia de adultos. En base a una longevidad promedio de 9.5 días, se determinó que la tasa mortalidad diaria es de 0.10. El período de preoviposición encontrado es menor de un día. El tiempo promedio para el desarrollo de huevo a adulto fue de 19.2 días. La tasa de oviposición diaria, la sobrevivencia de huevos y la sobrevivencia de ninfas fueron 7.6 huevos por día, 0.92 y 0.74, respectivamente. Por lo tanto se estimó la tasa de reproducción de la mosca blanca en tomate de 5.2 adultos por día.

Estudio del ciclo biológico de la mosca blanca (Bemisia tabaci Gennadius, Hemiptera: Aleyrodidae) en siete especies de cucurbitaceas

Con el objetivo de estudiar el ciclo de vida de la mosca blanca (Bemisia tabaci Gennadius) en siete especies de plantas se realizó el presente estudio a nivel de invernadero en la Universidad Nacional Agraria, ubicada en el km 12 ½ carretera norte. Se utilizaron adultos de la mosca blanca los cuales fueron criados en plantas de frijol rojo variedad INTA Masatepe. El experimento se realizó en el período comprendido entre los meses de Marzo-Mayo 2009 a una temperatura y humedad relativa diurna promedio 28.83 °C y 53.81%, respectivamente. De cada planta en estudio se seleccionó una hoja, se le puso una jaula de hoja (tipo leaf cage) y se introdujeron 20 moscas blancas con la relación 1:1, las que se dejaron 24 horas para oviposición, pasado este tiempo se retiraron las moscas y se procedió al conteo de huevos, una vez contados los huevos se realizaron conteos periódicos del número de ninfas y finalmente del número de adultos que emergieron de cada hoja inoculada. El análisis de los datos reflejó que no existió diferencia significativa en el número de huevos depositados en los distintos hospederos, tampoco existió diferencia significativa entre el número de huevos eclosionados, existió diferencia significativa en la variable ninfas que alcanzaron en estadio ninfal 4, con el mayor número de ninfas para el caso de la planta hospedera calabacín (C. moschata), también existió diferencia significativa para la variable emergencia de adultos siendo las plantas de melón (C. melo), pipian ( C. argyrosperma), calabacín (C. moschata), y pepino (C. sativus), son los tratamientos en los cuales existe mayor emergencia de adultos; en la variable duración de ciclo biológico los tratamientos presentaron diferencias significativas con gradiente de tiempo comprendido entre los 17 días para Calabacín y 25 días de duración en Paste, indicando que Calabacín ( C. moschata), es el hospedero que más favorece el tiempo del ciclo de vida y el paste es el hospedero que limita la duración de la mosca.

Aquaculture Asia, Vol.13, No.2, pp.1-56, April-June 2008

Peter Edwards writes on rural aquaculture: From integrated carp polyculture to intensive monoculture in the Pearl River Delta, South China. Better management practices for Vietnamese catfish. Ipomoea aquatica – an aquaculture friendly macrophyte. A status overview of fisheries and aquaculture development in Pakistan with context to other Asian countries. The changing face of post-grad education in aquaculture: contributing to soaring production and sustainable practices. Hatchery management in Bangladesh. Production of Cirrhinus molitorella and Labeo chrysophekadion for culture based fisheries development in Lao PDR Part I: Captive spawning. Application of ipil-ipil leaf meal as feed Ingredient for monosex tilapia fry (Oreochromis niloticus) in terms of growth and economics. Fermented feed ingredients as fish meal replacer in aquafeed production Aquaculture and fishing management in coastal zone demarcation: the case of Thailand. Reservoir fisheries of freshwater prawn – success story of an emerging culture-based giant freshwater prawn fishery at Malampuzha Dam in Kerala, India. Determining and locating sea cage production area for sustainable tropical aquaculture. SPC Pacific-Asia marine fish mariculture technical workshop: “Farming Marine Fishes for our Future”. Developing Better Management Practices for Marine Finfish Aquaculture. Breeding and seed production of silver pompano (Trachinotus blochii, Lacepede) at the Mariculture Development Center of Batam. Potential of silver pomfret (Pampus argenteus) as a new candidate species for aquaculture. NACA Newsletter.

漂浮状态下重力式及碟形网箱锚绳受力特性的比较

深水网箱养殖是海洋牧场建设的重要手段之一,在其发展及应用过程中出现了多种结构形式,其中以重力式和碟形深水网箱应用最为普遍[1].

Aquiculture and Marketing of the Florida Bay Scallop in Crystal River, Florida

The overall goal of this study was to develop a new fishery resource product through open-water aquaculture for the west coast of Florida that would compete as a non-traditional product through market development. Specific objectives were as follows: I. To grow a minimum of 50, 000 juvenile scallops to a minimum market size of40 mm in a cage and float system in the off-shore waters of Crystal River, Florida. 2. To determine the growth rate, survival, and time to market size for the individuals in this system and area to other similar projects like Virginia. 3. To introduce local fishermen and the aquaculture students at Crystal River High School to the hatchery, nursery, and grow-out techniques. 4. To determine the economic and financial characteristics of bay scallop culture in Florida and assess the sensitivity of projected costs and earnings to changes in key technical, managerial, and market related parameters. 5. To determine the market acceptability and necessary marketing strategy for whole bay scallop product in Florida. (PDF has 99 pages)

Aquaculture and marketing of the Florida Bay Scallop in Crystal River, Florida

The overall goal of this study was to develop a new fishery resource product through open-water aquaculture for the west coast of Florida that would compete as a non-traditional product through market development. Specific objectives were as follows: I. To grow a minimum of 50, 000 juvenile scallops to a minimum market size of40 mm in a cage and float system in the off-shore waters of Crystal River, Florida. 2. To determine the growth rate, survival, and time to market size for the individuals in this system and area to other similar projects like Virginia. 3. To introduce local fishermen and the aquaculture students at Crystal River High School to the hatchery, nursery, and grow-out techniques. 4. To determine the economic and financial characteristics of bay scallop culture in Florida and assess the sensitivity of projected costs and earnings to changes in key technical, managerial, and market related parameters. 5. To determine the market acceptability and necessary marketing strategy for whole bay scallop product in Florida. (PDF has 99 pages.)

Utilization of waste waters in fish production: preliminary results from fish culture studies in floating cages in a sewage pond, New Bussa, Nigeria

The utilization of waste waters in aquaculture were briefly reviewed. At the National Institute for Freshwater Fisheries Research (NIFFR), stocking density (20 to 160 fish/m super(3)) experiments using Sarotherodon galilaeus (without supplementary feeding) in floating cages were carried out in a sewage pond (0.4ha surface area). Cage culture of S. galilaeus was observed to have potentials in waste waters aquaculture. Recommendations were made on the execution of an intergrated waste water management and utilization.

Commercial aquaculture in Nigeria: a vertically integrated approach in the commercial freshwater farming of tilapia in floating bamboo net-hapas and cages systems

Tilapia once termed "poor man's" fish, still remains as the highly-priced food fish in many developing countries. The good attributes of this fish prompt its use in intensive aquaculture vertically integrated systems (VIS) which embrace broodstock development, hatchery/nursery and growout phase. Based on the series of studies carried out at Kainji Lake Research Institute, in New Bussa, Nigeria using Oreochromis (Tilapia niloticus) in floating bamboo hapas/cages, the recommended intensive modular systems were estimated to be capable of producing 4 million Tilapia fingerlings and 729 tons fish (Market-size) annually. Cost-benefit analysis showed the venture to have high prospects. It is recommended that priority be given to Tilapia cage culture at the national level in order to contribute immensely towards increased fish production

Aquaculture Asia, Vol.14, No.4, pp.1-52, October - December 2009

Sustainable aquaculture Peter Edwards writes on rural aquaculture Edwards, P. Mussel farming initiatives in North Kerala, India: A case of successful adoption of technology leading to rural livelihood transformation Laxmilatha, P., Thomas, S., Asokan, P.K., Surendranathan, V.G., Sivadasan, M.P., and Ramachandran, N.P. Selective study on the availability in indigenous fish species having ornamental value in some districts of West Bengal Panigrahi, A.K., Dutta, S. and Ghosh, I. Aquaculture livelihoods service centres in Aceh, Indonesia: A novel approach to improving the livelihoods of small scale fish farmers Ravikumar, B. and Yamamoto, K. Research and farming techniques e-Sagu Aqua - an innovative information and communication technology model for transfer of technology for aquaculture Vimala, D. D., Ravisankar, T., Mahalakshmi, P., and Kumaran, M. Freshwater pearl crop: an emerging enterprise in the Indian subcontinent Misra, G., Jena, J. and Kumar, K. Genetics and biodiversity Preliminary risk assessment of Pacific white leg shrimp (P. vannamei) introduced to Thailand for aquaculture Senanan, W., Panutrakul, S., Barnette, P., Chavanich, S., Mantachitr, V., Tangkrock-Olan, N., and Viyakarn, V. Farmer profile Aquatic animal health Asian fish health experts visit Australia Olsen, L. and Ingram, B. (Fisheries Victoria) Black gill disease of cage-cultured ornate rock lobster Panulirus ornatus in central Vietnam caused by Fusarium species Nha, V.V., Hoa, D.T. and Khoa, L.V. Marine Finfish Aquaculture Network Effects of the partial substitution fish oil by soybean oil in the diets on muscle fatty acid composition of juvenile cobia (Rachycentron canadum) Hung, P.D. and Mao, N.D. Growth response of cobia Rachycentron canadum (Pisces: Rachycentridae) under the hypersaline conditions of the Emirate of Abu Dhabi Yousif, O.M.*, Kumar, K.K. and Abdul-Rahman, A.F.A. NACA Newsletter

Oxy anion-accelerated rearrangements

The alkali metal salts of 1,5-hexadien-3-ols undergo accelerated Cope rearrangements to the enolates of δ, ε-unsaturated carbonyl compounds. The generality of the rearrangement was investigated in numerous systems, particularly acyclic cases, and the effect of changes in substituents, counterions, solvents, and geometrical structures were noted and discussed. Applications of this methodology in synthesis included the synthesis of the insect pheromone frontalin, the preparation of selectively monoprotected 1,6-dicarbonyl compounds from 4-methoxy- and 4-phenylthio-1,5-hexadien-3-ols, and the construction of complex ring structures such as a D-homo-estratetraenone derivative.

Thermochemical estimates of the energetics of anionpromoted alkoxide fragmentations were made, and in all cases heterolytic cleavage was favored over hemolytic cleavage by 8.5-53 kcal/mol. The implication of these and other thermochemical estimates is that the anionic oxy-Cope rearrangement occurs via a concerted mechanism rather than a dissociation-recombination process. The concepts of anion-induced bond weakening were successfully applied to an accelerated [1,3]-shift of a dithiane fragment in a cyclohexenyl system. Trapping experiments demonstrated that > 85% of the [1,3]-shift occurred within a solvent cage. Attempts at promoting an intramolecular ene reaction using the potassium salts of 2,7-octadien-1-o1 and 2,8-nonadien-1-o1 were unsuccessful. A general review of anion-promoted bond reorganizations and anion substituent effects is also presented.

Imidazolium-Based Organic Structure Directing Agents for the Synthesis of Microporous Materials

The central theme of this thesis is the use of imidazolium-based organic structure directing agents (OSDAs) in microporous materials synthesis. Imidazoliums are advantageous OSDAs as they are relatively inexpensive and simple to prepare, show robust stability under microporous material synthesis conditions, have led to a wide range of products, and have many permutations in structure that can be explored. The work I present involves the use of mono-, di-, and triquaternary imidazolium-based OSDAs in a wide variety of microporous material syntheses. Much of this work was motivated by successful computational predictions (Chapter 2) that led me to continue to explore these types of OSDAs. Some of the important discoveries with these OSDAs include the following: 1) Experimental evaluation and confirmation of a computational method that predicted a new OSDA for pure-silica STW, a desired framework containing helical pores that was previously very difficult to synthesize. 2) Discovery of a number of new imidazolium OSDAs to synthesize zeolite RTH, a zeolite desired for both the methanol-to-olefins reaction as well as NOX reduction in exhaust gases. This discovery enables the use of RTH for many additional investigations as the previous OSDA used to make this framework was difficult to synthesize, such that no large scale preparations would be practical. 3) The synthesis of pure-silica RTH by topotactic condensation from a layered precursor (denoted CIT-10), that can also be pillared to make a new framework material with an expanded pore system, denoted CIT-11, that can be calcined to form a new microporous material, denoted CIT-12. CIT-10 is also interesting since it is the first layered material to contain 8 membered rings through the layers, making it potentially useful in separations if delamination methods can be developed. 4) The synthesis of a new microporous material, denoted CIT-7 (framework code CSV) that contains a 2-dimensional system of 8 and 10 membered rings with a large cage at channel intersections. This material is especially important since it can be synthesized as a pure-silica framework under low-water, fluoride-mediated synthesis conditions, and as an aluminosilicate material under hydroxide mediated conditions. 5) The synthesis of high-silica heulandite (HEU) by topotactic condensation as well as direct synthesis, demonstrating new, more hydrothermally stable compositions of a previously known framework. 6) The synthesis of germanosilicate and aluminophosphate LTA using a triquaternary OSDA. All of these materials show the diverse range of products that can be formed from OSDAs that can be prepared by straightforward syntheses and have made many of these materials accessible for the first time under facile zeolite synthesis conditions.

Controles da produção primária em um Córrego de Mata Atlântica

Esta dissertação consiste de dois capítulos, cada um correspondendo a um estudo realizado de modo independente. Em um córrego de Mata Atlântica, Rio de Janeiro, Brasil, foram estudados efeitos de herbívoros e de controles ambientais no perifíton. No primeiro trabalho foram testados os efeitos do camarão Potimirim glabra, um engenheiro do ecossistema, nos parâmetros metabólicos de comunidades perifíticas (Produção, Respiração, Metabolismo Líquido da Comunidade e razão Produção:Respiração). O tratamento de inclusão de Potimirim produziu resultados inversos aos esperados, com aumento da clorofila e massa seca das comunidades perifíticas, levantando dúvida com relação à eficácia dos tratamentos. Nenhuma das variáveis metabólicas esteve relacionada aos tratamentos. Considera-se que efeitos artefato da gaiola utilizada na inclusão dos camarões podem ter prejudicado o efeito esperado de remoção de material pelos camarões. Os resultados podem indicar, entretanto, que para o efeito de herbívoros os parâmetros clorofila e massa seca sejam mais sensíveis e variáveis que os metabólicos para as comunidades estudadas. São recomendados futuros trabalhos com metodologias que reduzam os efeitos artefato, tais como exclusão de herbívoros com cercas elétricas. No segundo trabalho, foram estudados os estoques, a distribuição e os controles da biomassa perifítica para o córrego. Entre os substratos estudados, a areia apresentou os maiores estoques, com 5 vezes mais clorofila e 20 vezes mais massa seca que os substratos pedra e folha. Diferenças entre trechos com diferentes densidades do camarão herbívoro Potimirim glabra revelaram para o substrato pedra menores valores de massa seca para os locais onde o camarão é mais numeroso. Entre as variáveis ambientais, apenas a profundidade esteve relacionada aos dados de biomassa nos substratos pedra e areia. A comparação dos dados deste estudo com trabalhos anteriores pode indicar que distúrbios provocados por enchentes podem alterar os estoques e os padrões de distribuição para este córrego.

Two and Three Finger Caging of Polygons and Polyhedra

Multi-finger caging offers a rigorous and robust approach to robot grasping. This thesis provides several novel algorithms for caging polygons and polyhedra in two and three dimensions. Caging refers to a robotic grasp that does not necessarily immobilize an object, but prevents it from escaping to infinity. The first algorithm considers caging a polygon in two dimensions using two point fingers. The second algorithm extends the first to three dimensions. The third algorithm considers caging a convex polygon in two dimensions using three point fingers, and considers robustness of this cage to variations in the relative positions of the fingers.

This thesis describes an algorithm for finding all two-finger cage formations of planar polygonal objects based on a contact-space formulation. It shows that two-finger cages have several useful properties in contact space. First, the critical points of the cage representation in the hand’s configuration space appear as critical points of the inter-finger distance function in contact space. Second, these critical points can be graphically characterized directly on the object’s boundary. Third, contact space admits a natural rectangular decomposition such that all critical points lie on the rectangle boundaries, and the sublevel sets of contact space and free space are topologically equivalent. These properties lead to a caging graph that can be readily constructed in contact space. Starting from a desired immobilizing grasp of a polygonal object, the caging graph is searched for the minimal, intermediate, and maximal caging regions surrounding the immobilizing grasp. An example constructed from real-world data illustrates and validates the method.

A second algorithm is developed for finding caging formations of a 3D polyhedron for two point fingers using a lower dimensional contact-space formulation. Results from the two-dimensional algorithm are extended to three dimension. Critical points of the inter-finger distance function are shown to be identical to the critical points of the cage. A decomposition of contact space into 4D regions having useful properties is demonstrated. A geometric analysis of the critical points of the inter-finger distance function results in a catalog of grasps in which the cages change topology, leading to a simple test to classify critical points. With these properties established, the search algorithm from the two-dimensional case may be applied to the three-dimensional problem. An implemented example demonstrates the method.

This thesis also presents a study of cages of convex polygonal objects using three point fingers. It considers a three-parameter model of the relative position of the fingers, which gives complete generality for three point fingers in the plane. It analyzes robustness of caging grasps to variations in the relative position of the fingers without breaking the cage. Using a simple decomposition of free space around the polygon, we present an algorithm which gives all caging placements of the fingers and a characterization of the robustness of these cages.

Nature of the radical intermediates in a substituted cyclopropylcarbiny-allylcarbinyl system

We have sought to determine the nature of the free-radical precursors to ring-opened hydrocarbon 5 and ring-closed hydrocarbon 6. Reasonable alternative formulations involve the postulation of hydrogen abstraction (a) by a pair of rapidly equilibrating classical radicals (the ring-opened allylcarbinyl-type radical 3 and the ring-closed cyclopropylcarbinyl-type 4), or (b) by a nonclassical radical such as homoallylic radical 7.

[Figure not reproduced.]

Entry to the radical system is gained via degassed thermal decomposition of peresters having the ring-opened and the ring-closed structures. The ratio of 6:5 is essentially independent of the hydrogen donor concentration for decomposition of the former at 125° in the presence of triethyltin hydrdride. A deuterium labeling study showed that the α and β methylene groups in 3 (or the equivalent) are rapidly interchanged under these conditions.

Existence of two (or more) product-forming intermediates is indicated (a) by dependence of the ratio 6:5 on the tin hydride concentration for decomposition of the ring-closed perester at 10 and 35°, and (b) by formation of cage products having largely or wholly the structure (ring-opened or ring-closed) of the starting perester.

Relative rates of hydrogen abstraction by 3 could be inferred by comparison of ratios of rate constants for hydrogen abstraction and ortho-ring cyclization:

[Figure not reproduced.]

At 100° values of k_a/k_r are 0.14 for hydrogen abstraction from 1,4-cyclohexadiene and 7 for abstraction from triethyltin hydride. The ratio 6:5 at the same temperature is ~0.0035 for hydrogen abstraction from 1,4-cyclohexadiene, ~0.078 for abstraction from the tin hydride, and ≥ 5 for abstraction from cyclohexadienyl radicals. These data indicate that abstraction of hydrogen from triethyltin hydride is more rapid than from 1,4-cyclohexadiene by a factor of ~1000 for 4, but only ~50 for 3.

Measurements of product ratios at several temperatures allowed the construction of an approximate energy-level scheme. A major inference is that isomerization of 3 to 4 is exothermic by 8 ± 3 kcal/mole, in good agreement with expectations based on bond dissociation energies. Absolute rate-constant estimates are also given.

The results are nicely compatible with a classical-radical mechanism, but attempted interpretation in terms of a nonclassical radical precursor of product ratios formed even from equilibrated radical intermediates leads, it is argued, to serious difficulties.

The roles played by hydrogen abstraction from 1,4,-cyclohexadiene and from the derived cyclohexadienyl radicals were probed by fitting observed ratios of 6:5 and 5:10 in the sense of least-squares to expressions derived for a complex mechanistic scheme. Some 30 to 40 measurements on each product ratio, obtained under a variety of experimental conditions, could be fit with an average deviation of ~6%. Significant systematic deviations were found, but these could largely be redressed by assuming (a) that the rate constant for reaction of 4 with cyclohexadienyl radical is inversely proportional to the viscosity of the medium (i.e., is diffusion-controlled), and (b) that k_a/k_r for hydrogen abstraction from 1,4-cyclohexadiene depends slightly on the composition of the medium. An average deviation of 4.4% was thereby attained.

Degassed thermal decomposition of the ring-opened perester in the presence of the triethyltin hydride occurs primarily by attack on perester of triethyltin radicals, presumably at the –O-O- bond, even at 0.01 M tin hydride at 100 and 125°. Tin ester and tin ether are apparently formed in closely similar amounts under these conditions, but the tin ester predominates at room temperature in the companion air-induced decomposition, indicating that attack on perester to give the tin ether requires an activation energy approximately 5 kcal/mole in excess of that for the formation of tin ester.

Changes of water quality and sediment phosphorus of a small productive lake following decreased phosphorus loading

Esthwaite Water is the most productive or eutrophic lake in the English Lake District. Since 1945 its water quality has been determined from weekly or biweekly measurements of temperature, oxygen, plant nutrients and phytoplankton abundance. The lake receives phosphorus from its largely lowland-pasture catchment, sewage effluent from the villages of Hawkshead and Near Sawrey, and from a cage-culture fish farm. From 1986 phosphorus has been removed from the sewage effluent of Hawkshead which was considered to contribute between 47% and 67% of the total phosphorus loading to the lake. At the commencement of phosphorus removal regular measurements of phosphorus in the superficial 0-4 cm layer of lake sediment were made from cores collected at random sites. Since 1986 the mean annual concentration of alkali-extractable sediment phosphorus has decreased by 23%. This change is not significant at the 5% level but nearly so. There has been no marked change in water quality over this period. Summer dominance of blue-green algae which arose in the early 1980s after decline of the previous summer forms, Ceratium spp., has been maintained. Improvement in water quality is unlikely to be achieved at the present phosphorus loading.